Database Users

Need help with mobile odin...

I rooted my phone(exynos n900 version) running mk2 with cf autoroot...downloaded mobile odin and got a message "device model not supported(or not detected-check root)". Also asks whether to create a dump file which will take 30 mins..need help what to do?
I wish to flash twrp using it..If I can't use it could someone post the thread to use PC odin?
Thanks a lot!!!
Sent from my SM-N900 using xda premium

Mobile ODIN only supports N9005 currently according to CF's thread.
For flashing head over to Here and have a read

camera stop responding

Hi guys i'm using galaxy note 3 9005 bought this phone already rooted. Dont know what kind of firmware since this is my first time using an android phone. My problem is my camera suddenly will not work when i open the camera its just pure black on the screen you cant do anything then it will have an error of camera stop responding. And i noticed that my phone os getting hot and it drains the battery. I need to restsrt the phone in able to use it properly. Any idea guys? Thanks

blinkerwerkz said:
Hi guys i'm using galaxy note 3 9005 bought this phone already rooted. Dont know what kind of firmware since this is my first time using an android phone. My problem is my camera suddenly will not work when i open the camera its just pure black on the screen you cant do anything then it will have an error of camera stop responding. And i noticed that my phone os getting hot and it drains the battery. I need to restsrt the phone in able to use it properly. Any idea guys? Thanks
Click to expand...
Click to collapse
Factory reset your phone via recovery, or flash official firmware via Odin

bekasulaberidze said:
Factory reset your phone via recovery, or flash official firmware via Odin
Click to expand...
Click to collapse
Thanks sir for the response.. can you help me how to flash the official firmware? And also i checked on the knox my knox was tripped 0x1 will it be back to 0x0? Sorry newbie question.

blinkerwerkz said:
Thanks sir for the response.. can you help me how to flash the official firmware? And also i checked on the knox my knox was tripped 0x1 will it be back to 0x0? Sorry newbie question.
Click to expand...
Click to collapse
Your KNOX will always 0x1, so at first download official firmware from sammobile.com than download odin, in AP choose your extracted firmware md5 file and flash it after successfully flashing it must say PASS! when your phone finishes booting go to recovery and factory reset.
Sent from my SM-N900 using XDA Premium 4 mobile app

bekasulaberidze said:
Your KNOX will always 0x1, so at first download official firmware from sammobile.com than download odin, in AP choose your extracted firmware md5 file and flash it after successfully flashing it must say PASS! when your phone finishes booting go to recovery and factory reset.
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there a selection of firmware which I will download or I will just select for the Note 3 9005? Since this is the first time doing that kind of flashing and rooting.. BTW after I flash the firmware and factory reset I can proceed in rooting?

yes go to firmwares and choose what region you want I have n900 but on n9005 I preffer BTU britain firmware, after that you can root your phone using cfautoroot
Sent from my SM-N900 using XDA Premium 4 mobile app

bekasulaberidze said:
yes go to firmwares and choose what region you want I have n900 but on n9005 I preffer BTU britain firmware, after that you can root your phone using cfautoroot
Sent from my SM-N900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can I flash directly for Kitkat? Or do I need to flash the original firmware first before I update to kitkat. Sorry for asking too much question newbie here Lol!

no problem if I know I share my opinion you can flash whatever you want, if you want KK or JB but you must know that you can't downgrade kitkat to jellybean so you choose
Sent from my SM-N900 using XDA Premium 4 mobile app

I need the run down

I'm a tad confused as to how I'm supposed to go from mf3 to kit Kat while keeping root. If anyone could help out it would be great. I'd also like to know if staying on mf3 BL is better incase the bootloader is exploited again. Or is the work being done on current BLs.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

TTLayland said:
I'm a tad confused as to how I'm supposed to go from mf3 to kit Kat while keeping root. If anyone could help out it would be great. I'd also like to know if staying on mf3 BL is better incase the bootloader is exploited again. Or is the work being done on current BLs.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Your best bet is to go to MK2. Work is taking place across different bootloaders, but a good amount of work is on MK2 including Hashcode's kexec exploit which functions on the root method for MK2 that allows the kernel memory to be modified. You can sideload the MK2 OTA or just flash the ODIN files if you don't mind wiping the internal data/storage. Once that's done, install Safestrap, and using the different guides you can either go to KeepRoot OTA to put yourself on the stock system with root or flash any 4.4.2 TouchWiz ROM with the KitKat Magic Toolkit.

Links? I'm searching but would appreciate the help.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

KitKat magic tool http://forum.xda-developers.com/showthread.php?t=2680868
http://forum.xda-developers.com/showthread.php?t=2616221
Sent from my SAMSUNG-SGH-I337 using Tapatalk

HI
The KK Magic Tool.. tripping KNOX counter? Via Mobile ODIN and via PC ODIN

I'd rather like to avoid that
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

The magic tool doesnt trip Knox counter. You have to use PC odin
Sent from my SAMSUNG-SGH-I337 using Tapatalk

jmjoyas said:
The magic tool doesnt trip Knox counter. You have to use PC odin
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
●●?Thanks, I appreciate for the reply to my question, I did saferoot on my I337 AT&T and still have the KNOX in 0x0 and would like upgrade to KK. But the KNOX Remain in 0x0.
●●Since you did it, what ROM you use?

I have tested all the Roms given in the all things att thread (link given earlier) and all of them work. I am now using black box 3.0 for its AOSP look and feel.
Sent from my SAMSUNG-SGH-I337 using Tapatalk

Please understand I've gone from an atrix hd to this. While I understand adb and fast boot I am unfamiliar with Odin. I have downloaded the mk2 tar and extracted it.im I have odin 3.9.a tutorial on how to move from mf3 to mk2 without breaking my handset would be nice. I'm on mf3 with root nothing frozen no xposed.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

jmjoyas said:
I have tested all the Roms given in the all things att thread (link given earlier) and all of them work. I am now using black box 3.0 for its AOSP look and feel.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
Ok men.. Thanks a lot.. ?
---------- Post added at 07:14 PM ---------- Previous post was at 06:59 PM ----------
TTLayland said:
Please understand I've gone from an atrix hd to this. While I understand adb and fast boot I am unfamiliar with Odin. I have downloaded the mk2 tar and extracted it.im I have odin 3.9.a tutorial on how to move from mf3 to mk2 without breaking my handset would be nice. I'm on mf3 with root nothing frozen no xposed.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
●●Sorry but my English is not very good and I do not know if this can help. Please read carefully I'm not responsible what happens to your Cell.
>>Search that: http://forum.xda-developers.com/showthread.php?t=2573080

TTLayland said:
Please understand I've gone from an atrix hd to this. While I understand adb and fast boot I am unfamiliar with Odin. I have downloaded the mk2 tar and extracted it.im I have odin 3.9.a tutorial on how to move from mf3 to mk2 without breaking my handset would be nice. I'm on mf3 with root nothing frozen no xposed.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Since you have MF3, you have a locked bootloader and so lot of things are restricted. We do not have a direct root method for kitkat and so the only go is to install a pre-rooted kitkat rom.
Your best bet is to odin flash MK2, root, install safestrap and use the kitkat magic tool to install a kitkat rom.
Using Odin is simple.
Run odin in admin mode (right click and select "run as administrator")
Under options, only "Auto Reboot" and "F.Reset Time" should be selected.
Click on "BL" button and select the "BL_I337UCUEMK2_1921628_REV06_user_low_ship_MULTI_CERT.tar.md5" file from the MK2 extract.
Do the same for AP, CP and CSC
Put the phone in download mode
"adb reboot download" or
power-off the phone and press power, home and volume down buttons together. Hold it till you get the warning screen where you have to press volume up key.
Connect it to the computer. Odin should recognize and you should see an "Added!!" message in odin.
Hit the start button.
You should now have a clean stock MK2 firmware. Remember that this will wipe all your data.
Root: Use saferoot to root.
Safestrap: Install Safestrap v3.72 APK. Open the app and select install recovery.
Note: Safestrap is a special recovery that is available during the normal boot process. The stock recovery is still available and can be entered by pressing home and volume up when powering up the phone.
Entering safestrap recovery: Reboot the phone and when you see the safestrap screen, press the capacitive menu button (touch screen doesnt work).
Follow Kitkat magic tool and install the choice your rom from the All things AT&T MK2 and NB1 thread.

jmjoyas said:
I have tested all the Roms given in the all things att thread (link given earlier) and all of them work. I am now using black box 3.0 for its AOSP look and feel.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
So you can use Black Box 3.0 on your AT&T i337? I saw on the list that it says "XXUFNB8 -- i9505" and figured that it would be risky to run it on my i337. Are there any extra steps that you have to take to get it to work?
I haven't made the jump from mf3 yet but Black Box 3 is looking pretty tempting.

Error
So I downloaded the MK2 AIO Tar file and then placed each file into their respective slots.
I keep encountering this error:
Invalid Percent of Drawing download progress bar!
Now this is happening every single time I use Odin 3 V 3.09.
I am redownloading the MK2 files and instead picking the download with the 4 separate players.
Hopefully this is resolved with the new download but if you guys have any suggestions lets me know.

Trying again now with the multiple file version. Seems to be working like a charm.

TheLentilFarmer said:
So you can use Black Box 3.0 on your AT&T i337? I saw on the list that it says "XXUFNB8 -- i9505" and figured that it would be risky to run it on my i337. Are there any extra steps that you have to take to get it to work?
I haven't made the jump from mf3 yet but Black Box 3 is looking pretty tempting.
Click to expand...
Click to collapse
Any ROM listed in the All things AT&T MK2 and NB1 thread will work on ATT I337. The thread is for this phone.
You have to first upgrade to MK2 by flashing the full odin image from the thread and then use KitKat magic tool to install kitkat Roms.

Wifi isn't working. I flashed the mk2 modules but Nada. Do I need nc1 modules and if so where do I download it.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app

figured it out. thank you guys.

rooted phone, flash 4.4.2, questions

So I have a rooted Galaxy Note II with Android 4.3 and I want to flash Android 4.4.2. (I can't use OTA because I am rooted, it says your devices has been modified.......).
1. How to do that? I know that it's not the same procedure as if you have a nonrooted phone.
Someone told me I have to flash 4.3 with odin and then flash 4.4.2, is that true?
2 How about use triangleaway app to reset flashcounter and use OTA? or OTA will still not work?
3. How to flash 4.4.2 without removing root??

Download odin and flash the 4.4.2 package
And then download the root package and flash it..
And u are done
If u want ota.. U have to flash using odin and the modem of your country
Sent from my GT-I9300 using Tapatalk

If possible than please step wise detail with link for Indian note2 with 4.3 jealybean
Sent from my GT-N7100 using Tapatalk

jay5204.abd said:
Download odin and flash the 4.4.2 package
And then download the root package and flash it..
And u are done
If u want ota.. U have to flash using odin and the modem of your country
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
so the procedure is the same?

Which one are you asking for??
absolutely the same for odin flashing
Sent from my GT-I9300 using Tapatalk

jay5204.abd said:
Which one are you asking for??
absolutely the same for odin flashing
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
about this:
""""""""""'
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
"""""""""""""""
si I can install directly 4.4.2?

It is the correct procedure .. Just incase you are confused head over to the general forum and check for already posted threads on flashing
Happy flashing
Sent from my GT-I9300 using Tapatalk

Thank you

[Help] Custom Download Count.

As there is no support from Triangle away on 4.3...
Can Flashing Stock Rom [4.3/4.4.2] via Odin able to remove my Custom download count?
& what about device status after that?
& I don't care about Knox counter!
# Device's Current status :
Stock 4.3 (N7100-XXEMI6) ROOTED.
KNOX VOID - 0×1
CUSTOM DOWNLOAD COUNT - 01
Device Status - Custom.
Sent from my GT-N7100 using XDA Premium 4 mobile app

Anyone else?
Sent from my GT-N7100 using XDA Premium 4 mobile app

Look I did this myself to remove the counters on 4.3 and return all official.
1. Download official 4.3 and put it on sd card.
2. Install Mobile odin.
3. Flash the stock firmware through mobile odin and inject root to it.
4. Now after all boots install triangle away; we did this because triangle away only works with stock recovery.
5. Now after you use triangle away all counters will go away exept knox counter.
6. From odin pc flash the firmware again and wait for it to boot.
7. Now you will find all counters official exept system status custom on bootloader.
8. To get everything stock you will have to a factory reset again from the device.
This procedure takes time, make sure you have enough patience and battery.
This is for the 4.3. Didn't try it on 4.4.2.
Goodluck, report back please.
Sent from my GT-I9506 using Tapatalk

mezo91 said:
Look I did this myself to remove the counters on 4.3 and return all official.
1. Download official 4.3 and put it on sd card.
2. Install Mobile odin.
3. Flash the stock firmware through mobile odin and inject root to it.
4. Now after all boots install triangle away; we did this because triangle away only works with stock recovery.
5. Now after you use triangle away all counters will go away exept knox counter.
6. From odin pc flash the firmware again and wait for it to boot.
7. Now you will find all counters official exept system status custom on bootloader.
8. To get everything stock you will have to a factory reset again from the device.
This procedure takes time, make sure you have enough patience and battery.
This is for the 4.3. Didn't try it on 4.4.2.
Goodluck, report back please.
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
I'm rooted but using stock recovery not custom one, so can I use triangle away now? (on 4.3).
Sent from my GT-N7100 using XDA Premium 4 mobile app

optimusPRIME said:
I'm rooted but using stock recovery not custom one, so can I use triangle away now? (on 4.3).
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
start from point number 4. yes you can.

Flash stock again
The binary will be official again
No counts
Sent from my GT-N7100 using Tapatalk

aakazh said:
Flash stock again
The binary will be official again
No counts
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
That will not remove the counters.
Sent from my GT-I9506 using Tapatalk