[Q] Kindle fire rooting - Kindle Fire General

is it necessary to install the twarp software when rooting? I just had to go through a lot of work to remove it from a previously rooted kindle fire, and don't want to have to go through that again if I do not need to.

.
Thread moved. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.

You do not need TWRP to root, but you do need it to install custom ROMs.
Sent from my Kindle Fire using xda premium

response
thanks. I kinda thought so, but wanted to make sure. I had rooted my daughters kindle, and she unrooted it, and it worked fine for a while, but today it got stuck booting only to the twrp screen. finally got that fixed and wanted to check before I re rooted it.

Related

[Q] Some rooting questions

Hey all!
I was thinking of rooting my eris, but after reading the forum some, I still have a couple questions about Eris rooting and rooting in general.
First off, if I use the one click root app, I will not have to install a new rom, correct? Also, how likely is it to brick my phone? If bricked, is there a method of restoring it?
Secondly, if I install the FroYo rom, would I be able to go back to the factory build of OTA 2.1? Or would I be stuck with custom roms then?
The only reason I am concerned with restoring the factory rom is that if something happens to the phone, I'd like my warranty to still be able to cover it (I'm 99% sure that they won't cover a rooted froyo thats overclocked).
Also, sorry if these have been asked before, I just wasn't able to find them on my own.
You need to ask these questions n the Q&A forum. This is a Dev forum and should only have questions relating to Roms and issues with custom roms.
Get ready for the dog pile.
Uh oh, my bad. I thought it was in the q&a...
Sorry guys, I'll see if I can delete it from the app and repost
Sent from my Eris using XDA App
there are answers to ur questions all over these forums , ushouldnt have any troubles finding them

[i9003] Frustrated First Root

Starting off, I'm probably posting in the wrong section. Excuse my forum etiquette, but I need help with this because I'm insanely frustrated and in pain (Decided to learn how to exploit the android OS while recovering from my surgery).
So, if you've read past that first part and are still willing to help, thank you.
Moderators: If you absolutely need to move this post, please move it to a section where it will actually get attention and I can get an answer. Thanks.
Anyway, the breakdown of my problem is this;
I wanted to root my new day old Sprint CMDA Nexus S, I've never rooted anything android, and if anything the most I've done with a droid OS is installed it on my old iphone 2g.
So I did some googling and first thing to come up was this guide:
nexusshacks(dotcom)/nexus-s-hacks/how-to-root-nexus-s/
Now, usually I would do a bit more research, but because of the lack of blood in my body I'm doing dumb things, making bad decisions, whatever.
So obviously this guide doesn't work, even a quick skim of the comments shows that, I try to follow this guide-
I followed step "fastboot flash boot rootboot.img" then tried to reboot. It freezes at the google boot logo. This is where I start getting a bit nervous because I have absolutely no idea what I'm doing.
So I think "Well, if I jump over to someone elses tutorial and do that it should overwrite any "root"ing data I've tried to put into the device.
So I jump over to this:
androidadvices(dotcom)/root-sprint-nexus-gingerbread-235-update/3/
It has me install PDANet and it's frozen since on the installing PDAnet to your phone.
I just want to get my Nexus S back to original factory default so I can start fresh from there without a terrible guide.
Can someone please help me get there?
Thanks.
tl;dr:
Bad guide soft bricked my phone and I want to restore it to factory defaults
agnl said:
Starting off, I'm probably posting in the wrong section. Excuse my forum etiquette, but I need help with this because I'm insanely frustrated and in pain (Decided to learn how to exploit the android OS while recovering from my surgery).
So, if you've read past that first part and are still willing to help, thank you.
Moderators: If you absolutely need to move this post, please move it to a section where it will actually get attention and I can get an answer. Thanks.
Anyway, the breakdown of my problem is this;
I wanted to root my new day old Sprint CMDA Nexus S, I've never rooted anything android, and if anything the most I've done with a droid OS is installed it on my old iphone 2g.
So I did some googling and first thing to come up was this guide:
nexusshacks(dotcom)/nexus-s-hacks/how-to-root-nexus-s/
Now, usually I would do a bit more research, but because of the lack of blood in my body I'm doing dumb things, making bad decisions, whatever.
So obviously this guide doesn't work, even a quick skim of the comments shows that, I try to follow this guide-
I followed step "fastboot flash boot rootboot.img" then tried to reboot. It freezes at the google boot logo. This is where I start getting a bit nervous because I have absolutely no idea what I'm doing.
So I think "Well, if I jump over to someone elses tutorial and do that it should overwrite any "root"ing data I've tried to put into the device.
So I jump over to this:
androidadvices(dotcom)/root-sprint-nexus-gingerbread-235-update/3/
It has me install PDANet and it's frozen since on the installing PDAnet to your phone.
I just want to get my Nexus S back to original factory default so I can start fresh from there without a terrible guide.
Can someone please help me get there?
Thanks.
tl;dr:
Bad guide soft bricked my phone and I want to restore it to factory defaults
Click to expand...
Click to collapse
Ok I can see you need help but I am inclined to warn you instead. Stop. If you cannot figure out how to root the easiest phone to root then you shouldn't be messing around with your phone. You will end up screwing something up, won't know how to fix it, and come crying here for help. Do yourself some research before you go and ruin your phone.
Yes you posted in the wrong place.
There is a thread in this forum on how to root the nexus s 4g. Rooting is model specific. The T-Mobile Nexus s is different from the sprint, att, Rodgers, o2 etc.
Please please do some more research!
Sent from my PC36100 using XDA Premium App
Thanks for a reply, and I understand I dug a hole.
Now I need to get out of said hole, so if you had any directions of how to dig myself out, that'd be great.
if you can get into fastboot then you are still cool, if not you're gonna have to odin it. I dont actually know where the tar files are, Micheal posted it up but i think they deleted the thread. You should have came to xda first,we have one clicks.
actually rooting is the same across the board. same steps same everything... in fact the one click root version 1 would work on any and all of them, version 2 branches out a bit further due to that it installs cwm.
anyways boot into fastboot, download stock fastboot images from petes thread found here http://wonderly.com/bb/CRESPO4G/OEM/GRJ22IMAGES.zip and flash them all in fastboot.
youll be back on stock grj22 but youll at least be booting.. from there follow a guide for rooting this phone that has you flash cwm (not a prerooted kernel). or be lazy and use my one click root
You sir are a class act. We need a ton more guys like you here at XDA
shabbypenguin said:
actually rooting is the same across the board. same steps same everything... in fact the one click root version 1 would work on any and all of them, version 2 branches out a bit further due to that it installs cwm.
anyways boot into fastboot, download stock fastboot images from petes thread found here http://wonderly.com/bb/CRESPO4G/OEM/GRJ22IMAGES.zip and flash them all in fastboot.
youll be back on stock grj22 but youll at least be booting.. from there follow a guide for rooting this phone that has you flash cwm (not a prerooted kernel). or be lazy and use my one click root
Click to expand...
Click to collapse
mikeyinid said:
You sir are a class act. We need a ton more guys like you here at XDA
Click to expand...
Click to collapse
+1
Sent from my Nexus S 4G using XDA Premium App
mikeyinid said:
You sir are a class act. We need a ton more guys like you here at XDA
Click to expand...
Click to collapse
lol you give me way too much credit mikey but thanks for teh vote of confidence

[Q] Is Burrito Root Relevant?????

or should we use KFU 0.9. I ask because IMHO, this forum has the most confusing series of threads on rooting/recovery/TWRP installation that I have ever read.
Without meaning to be disrespectful to the valiant efforts of the devs, I informally count at least ten times the number of posts stating issues as for successes and every time I check, there is yet another "method" for unbricking or installing, etc...particularly for the notorious yellow triangle.
Could one or more mods please clean up this forum to provide a guiding light.
BurritoRoot is the only software root method available, so yeah, it's relevant. KFU uses it to perform the root, it doesn't have its own exploit or rooting method. It was created to make common tasks more convenient, so it compiles all kinds of different functions into one application. There's nothing in KFU that can't also be done manually (as far as I know), but it can sure makes things a hell of a lot faster.
kfu .9 seems to have a serious problem with the recovery image that is part of the zipped file. It is an 8 kb file. It is the wrong file. The correct file is 10,624 kb.
If you are going to use the script, then for goodness sakes copy the proper .img file into the Recovery directory. If you need help finding it, it's at:
http://teamw.in/project/twrp2
I agree 100% the kindle fire forum needs better flow and direction showing people exactly what needs to be done if you want to root and flash Roms on a brand new fire. I see things like burritoroot, twrp, kindle fire utility v.9 , ext... what do we do first?
Sent from my Kindle Fire using xda premium
You do realize that the kindlefire utility is just a script which grabs the various pieces to do the rooting?
In the batch file (which makes up the kindlefire utility)
Code:
set twrpurl="http://techerrata.com/file/twrp2/twrp-blaze-2.0.0RC0.img"
Which IS the correct twrp install image...
Also, the website for the TWRP project was down a lot of the day, so perhaps you tried it when it was down and got a truncated corrupt file?
docfreed said:
or should we use KFU 0.9. I ask because IMHO, this forum has the most confusing series of threads on rooting/recovery/TWRP installation that I have ever read.
Without meaning to be disrespectful to the valiant efforts of the devs, I informally count at least ten times the number of posts stating issues as for successes and every time I check, there is yet another "method" for unbricking or installing, etc...particularly for the notorious yellow triangle.
Could one or more mods please clean up this forum to provide a guiding light.
Click to expand...
Click to collapse
Videos or links to videos would be tits too!
Sent from my Kindle Fire using xda premium
I agree with the others as far as the rooting of the Fire has become mass confusion. Ever since 6.2.1, there has been no "sure way" of rooting this firmware. There are several "guides" and "official ....", and personally, I'm not sold on any of them.
I was rooted prior to the 6.2.1 update, and I'll stay unrooted until a new root procedure is given that has a better success rate than the other 10 procedures posted.
Personally, I think only a MODERATOR should be able to title a thread as "Official".
This is my official opinion.
YMark said:
I agree with the others as far as the rooting of the Fire has become mass confusion. Ever since 6.2.1, there has been no "sure way" of rooting this firmware. There are several "guides" and "official ....", and personally, I'm not sold on any of them.
I was rooted prior to the 6.2.1 update, and I'll stay unrooted until a new root procedure is given that has a better success rate than the other 10 procedures posted.
Personally, I think only a MODERATOR should be able to title a thread as "Official".
This is my official opinion.
Click to expand...
Click to collapse
Burrito root works perfectly fine, what're you talking about
YMark said:
I agree with the others as far as the rooting of the Fire has become mass confusion. Ever since 6.2.1, there has been no "sure way" of rooting this firmware. There are several "guides" and "official ....", and personally, I'm not sold on any of them.
I was rooted prior to the 6.2.1 update, and I'll stay unrooted until a new root procedure is given that has a better success rate than the other 10 procedures posted.
Personally, I think only a MODERATOR should be able to title a thread as "Official".
This is my official opinion.
Click to expand...
Click to collapse
You are mistaken, BurritoRoot is a sure way of rooting it, it is 100% effective at what it does. It restarts adbD as root.
It is an official thread, as it's mine, and I wrote the damn thing. Other people were making threads about it. I asked a moderator to sticky it so people would stop using the threads started by un-associated people.
As far as 10 procedures, I have only seen 2. One using a factory cable/hardware hacking and Burrito root.
the other 8 or so are just people telling you how you can use BurritoRoot.
docfreed said:
or should we use KFU 0.9. I ask because IMHO, this forum has the most confusing series of threads on rooting/recovery/TWRP installation that I have ever read.
Without meaning to be disrespectful to the valiant efforts of the devs, I informally count at least ten times the number of posts stating issues as for successes and every time I check, there is yet another "method" for unbricking or installing, etc...particularly for the notorious yellow triangle.
Could one or more mods please clean up this forum to provide a guiding light.
Click to expand...
Click to collapse
Burrito Root is relevant because... its the only way to root 6.2.1 without using a factorycable, or doing hardware hacking.
If you read/watch KFU you will see he is using a custom version of BurritoRoot I wrote for him.
KFU uses a version of BurritoRoot Jcase wrote specifically for me out of generosity to make KFU relevant again and help people out.
My tool is not to take away from what jcase does, but rather take what he has given us, and try to make things better.
YMark said:
I agree with the others as far as the rooting of the Fire has become mass confusion. Ever since 6.2.1, there has been no "sure way" of rooting this firmware. There are several "guides" and "official ....", and personally, I'm not sold on any of them.
I was rooted prior to the 6.2.1 update, and I'll stay unrooted until a new root procedure is given that has a better success rate than the other 10 procedures posted.
Personally, I think only a MODERATOR should be able to title a thread as "Official".
This is my official opinion.
Click to expand...
Click to collapse
Hai, it are legit
TheDeadCpu said:
Hai, it are legit
Click to expand...
Click to collapse
i R developer
I do not believe that burrito root is the problem at all, in my opinion this is very str8 forward way of rooting. I think that the real problem that this thread was started over is people trying to install twrp & firefirefire. So many people keep getting stuck in a boot loop, and is very hard to follow what the problem or the actual fix was. There should be a new thread started stating the official way of installing twrp, firefirefire, and cm7. Honestly to stop the confusion completely a video of one doing it step by step would be the best resolve for this. jcase did an amazing job with burrito root and is NOT the problem at all so to answer the question is burrito root relavent? It is not only relavent but the only and easiest way to root!!! Keep up the great work jcase
[-_-] said:
I do not believe that burrito root is the problem at all, in my opinion this is very str8 forward way of rooting. I think that the real problem that this thread was started over is people trying to install twrp & firefirefire. So many people keep getting stuck in a boot loop, and is very hard to follow what the problem or the actual fix was. There should be a new thread started stating the official way of installing twrp, firefirefire, and cm7. Honestly to stop the confusion completely a video of one doing it step by step would be the best resolve for this. jcase did an amazing job with burrito root and is NOT the problem at all so to answer the question is burrito root relavent? It is not only relavent but the only and easiest way to root!!! Keep up the great work jcase
Click to expand...
Click to collapse
Precisely
Thanks
[-_-] said:
I do not believe that burrito root is the problem at all, in my opinion this is very str8 forward way of rooting. I think that the real problem that this thread was started over is people trying to install twrp & firefirefire. So many people keep getting stuck in a boot loop, and is very hard to follow what the problem or the actual fix was. There should be a new thread started stating the official way of installing twrp, firefirefire, and cm7. Honestly to stop the confusion completely a video of one doing it step by step would be the best resolve for this. jcase did an amazing job with burrito root and is NOT the problem at all so to answer the question is burrito root relavent? It is not only relavent but the only and easiest way to root!!! Keep up the great work jcase
Click to expand...
Click to collapse
In my post earlier, I was awkwardly trying to say this. No disrespect meant to JCase. In fact, a big THANKS. I'm trying to use this burrito procedure now, only from a Mac.
jcase said:
Precisely
Thanks
Click to expand...
Click to collapse
Most definitely
I would hate for people to get the wrong idea about such a well written method when the confusion lies with something entirely different. I am working on going back to factory default on my kindle, and will work on a video that hopefully will clear up the confusion with the twrp, and firefirefire install correctly...
As for people trying to install burrito root here is a video that is correct and fairly simple to follow...!
http://www.youtube.com/watch?feature=player_embedded&v=KapnjR89ICA
---------- Post added at 09:29 PM ---------- Previous post was at 09:24 PM ----------
YMark said:
In my post earlier, I was awkwardly trying to say this. No disrespect meant to JCase. In fact, a big THANKS. I'm trying to use this burrito procedure now, only from a Mac.
Click to expand...
Click to collapse
A great way to show your thanks to a developer that uses his time to make our lives a little easier is by donating to them a little goes a long way, and really proves to the dev that they are and should continue to keep up the fabulous work... I will not link jcase's donation link in this post because I am not aware what the rules are on that but I am sure if you have all found his root then finidng the donation site is not far from that..!
YMark said:
In my post earlier, I was awkwardly trying to say this. No disrespect meant to JCase. In fact, a big THANKS. I'm trying to use this burrito procedure now, only from a Mac.
Click to expand...
Click to collapse
The thing is BurritoRoot is just for one thing, starting adbD as root. Everything after is entirely unrelated, and had nothing to do with me. I haven't even laid hands on a kindle fire yet so I can't even comment on any of it, nor do I know the specifics.
With OSX I believe you can just run adb from developer.android.com as root without any system changes, if its like linux.
jcase said:
The thing is BurritoRoot is just for one thing, starting adbD as root. Everything after is entirely unrelated, and had nothing to do with me. I haven't even laid hands on a kindle fire yet so I can't even comment on any of it, nor do I know the specifics.
With OSX I believe you can just run adb from developer.android.com as root without any system changes, if its like linux.
Click to expand...
Click to collapse
I rooted my Fire yesterday using a Mac and it took hardly 2-3 minutes. All the commands are same as given in the thread at rootzwiki. Just fire up terminal after setting up adb. Nothing special needed. No drivers or changing usb.ini needed. It detected Kindle fire right away. Works without a problem.
Big Thanks to all the developers here and all there hard work. The work that has gone into the Kindle Fire in such a short amount of time is Amazing.
I first looked at the title of the thread and thought - is this guy on crack? But I thought about it and with the updates and different root method the forum is pretty confusing, especially if someone just got a Kindle Fire over Christmas and just showed up here. I am rooted and using the secured pre-rooted 6.2.1 boot image Not the OTA and I am not sure what to do to prepare for the next OTA.
I think it would probably help if someone(I'd do it but I am a bit confused, too) did a short "START HERE TO ROOT thread. Something like"
6.2? ---- rooted? -------- Go here
unrooted? ------ Go here
6.2.1? ---- unrooted OTA? ------------------ Go here (KFU - FFF/TWRP/Burrito)
pre-Rooted Boot image ------- Go here/ do nothing?
... just a suggestion

Kindle fire "how to" videos (root, twrp, flash a Rom)

Ive searched everywhere and tried to find videos on how to
1. Root
2. Flash cm7
3. Install and use twrp
I was hoping we could start a thread that has videos or links to videos that would best help people unleashing the full capabilities of the KF.
I admit I am a noob when it comes to this stuff and when I see lines of script its like trying to read Spanish but if I had a good video to watch, it would be a piece of cake. At least it was a piece of cake when I watched videos on how to root and flash my samsung captivate.
Sent from my Kindle Fire using xda premium
I would agree this would be very helpful to stray from all of the confusion. I do believe that everyone seems to be okay rooting with burrito root, but unfortunately there is nothing that states the order one must go in to get twrp, and cm7 installed as well. If I am not mistaken it doesnt matter if you are rooted or not you can install twrp, and cm7.... I think that the real issue seems to be the boot loop that everyone is getting stuck in when trying to install twrp & firefirefire, that is causing all of the confusion...!
I had 6.21 rooted w/CM7 . But a simple reboot left me w/dark screen. I restored the stock.
Maybe we need only to search them on YouTube and then create a post here
Sent from my Kindle Fire using xda premium
I found this video on Youtube.
http://www.youtube.com/watch?v=KapnjR89ICA
would this be a good guide to follow. Just wanted to share and get other thoughts. Thanks Nat3mil for video and jcase for the root.
More videos would be great on how to install the twrp, KFU .9 ect....
Here is another video that was just uploaded yesterday. It seems pretty well done too.
http://www.youtube.com/watch?v=aOXFEEYufug
I was hoping I could get feed back from everyone and maybe start a thread that has links to the best videos with the best descriptions to help everyone who is unsure of, or who is new to rooting, flashing, ect..
Like I said, i am new too all of this as well, so the guys who actually know what they are doing when it comes to rooting, I would appreciate your response and let us know what videos you recommend.
Thanks everyone and I hope this helps.
Install TWRP on Kindle Fire - http://www.youtube.com/watch?v=CicZ21H3-zY
How to root - http://www.youtube.com/watch?v=CicZ21H3-zY
Install ADB driver - http://www.youtube.com/watch?v=Ds7HjmJ5Yg8&list=UU-fsR9vJRgzMKEuxyzCKPAA&index=1&feature=plcp
Restore Stock Software - http://www.youtube.com/watch?v=hSGcBR2fFIM&list=UU-fsR9vJRgzMKEuxyzCKPAA&index=4&feature=plcp
Lets pick the best videos and post in a new thread that's easy for everyone to get. I think if people actually see, step by step, how it is being done it should answer a lot of questions.
Let me know if these videos are any good or not so we know which ones to take off and which ones to leave on to help the members.
Any luck finding new videos?
Sent from my Kindle Fire using xda premium
Will this allow for dual boot? Or does this remove the original software?

[ROM] Kindle Fire Stock Rom Wanted

I'm Restoring my Kindle and want to restore the Stock Rom. I can see lots of updates but no stock Roms.
Can anyone point me to where I can Download the Stock 6.2.1 Or 6.2.2 ROM. I presume I need a rooted one.
Thanks
If you really want totally stock, get it from Amazon. Change the extension to .ZIP and voila.
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
Otherwise if you want a pre-rooted one, get the MoDaCo one.
if you use the amazon rom you loose fff, twrp and root !
btw. please post such questions in the general section
DeerSteak said:
If you really want totally stock, get it from Amazon. Change the extension to .ZIP and voila.
http://www.amazon.com/gp/help/customer/display.html?nodeId=200790620
Otherwise if you want a pre-rooted one, get the MoDaCo one.
Click to expand...
Click to collapse
I'm not new to android but new to this device(got mine last night for college) and I wanted to ask if the file you linked to is complete. I am going to be messing around on off days if I get any and need my safety blanket should I mess up. Thanx for any and all help...love my kindle so far
Sent from my Nexus S 4G
raiderep said:
I'm not new to android but new to this device(got mine last night for college) and I wanted to ask if the file you linked to is complete. I am going to be messing around on off days if I get any and need my safety blanket should I mess up. Thanx for any and all help...love my kindle so far
Sent from my Nexus S 4G
Click to expand...
Click to collapse
At least right now in the Kindle Fire forum, every ROM is complete other than the one that says "update only" in the thread title. I hope it stays this way. And it is true what was posted after me; installing the one from Amazon will wipe your boot loader/recovery and replace them with Amazon's stock.
moved to General
DeerSteak said:
At least right now in the Kindle Fire forum, every ROM is complete other than the one that says "update only" in the thread title. I hope it stays this way. And it is true what was posted after me; installing the one from Amazon will wipe your boot loader/recovery and replace them with Amazon's stock.
Click to expand...
Click to collapse
Cool thanx for the reply and I agree this should be in general but I saw this and felt better asking here than starting a new thread on it.
Sent from my Nexus S 4G

Categories

Resources