I tested this out with both the transformer and slider. No need to do anything complicated.
ASSUMPTION:
You have CWM installed.
INSTRUCTION:
(1) Download the latest firmware from asus website.http://support.asus.com/download.aspx?SLanguage=en&p=20&s=16&m=Eee%20Pad%20Transformer%20TF101&os=32
(2) Unzip it. Inside, you should find another zip file. Place that zip file on your micro sdcard.
(3) Plug in your micro sdcard. Go into CWM.
(4) Wipe data/ factory reset, wipe cache partition, wipe davik cache.
(5) Flash in the zip file you just got from the asus website.
(6) Once restarted, you will be back on non-rooted stock rom and stock recovery.
Yeah eyesoftsys posted the same thing a while back
http://forum.xda-developers.com/showpost.php?p=22886559&postcount=1
goodintentions said:
I tested this out with both the transformer and slider. No need to do anything complicated.
ASSUMPTION:
You have CWM installed.
INSTRUCTION:
(1) Download the latest firmware from asus website.
(2) Unzip it. Inside, you should find another zip file. Place that zip file on your micro sdcard.
(3) Plug in your micro sdcard. Go into CWM.
(4) Flash in the zip file you just got from the asus website.
(5) Once restarted, you will be back on non-rooted stock rom and stock recovery.
Click to expand...
Click to collapse
I don't think this wipes data, you need to factory wipe first..IIRC
recovery
Will it remove also cwm recovery? Just wondering
sarriel said:
Will it remove also cwm recovery? Just wondering
Click to expand...
Click to collapse
Yes it will remove CWM
sarriel said:
Will it remove also cwm recovery? Just wondering
Click to expand...
Click to collapse
Look at step 6.
I downloaded the us 9.2.1.11 from Asus website . Will it work if I'm already running revlover ics? Just making sure before I unroot.
Sent from my SPH-D710 using xda premium
parmend said:
I downloaded the us 9.2.1.11 from Asus website . Will it work if I'm already running revlover ics? Just making sure before I unroot.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I don't care if you have the googoogaga rom running right now. Just follow my method to unroot.
There`s one way to back to stock without loosing all my games and apps orden i can back up all? How?
Does this forever block out being able to root again?
RiffyDivine said:
Does this forever block out being able to root again?
Click to expand...
Click to collapse
No. Unless u go back to a stock rom that is not able to be rooted. The hc 8.6.5.21 is the only stock rom that can't be rooted I believe.
Sent from my SAMSUNG-SGH-I777 using XDA
RiffyDivine said:
Does this forever block out being able to root again?
Click to expand...
Click to collapse
You should be able to root again using ViperMod.
viper mod
I flashed viper mod After ics ota was totally stock then having no problems so far but now how do I flash any roms?never had cwm on my transformer . So now what I would like to get revolver but stuck have a b70. Any help?
thunderman98 said:
I flashed viper mod After ics ota was totally stock then having no problems so far but now how do I flash any roms?never had cwm on my transformer . So now what I would like to get revolver but stuck have a b70. Any help?
Click to expand...
Click to collapse
Use RecoveryInstaller to flash CWM recovery.
With CWM recovery you can flash ROMs.
Good post here
http://forum.xda-developers.com/showthread.php?t=1494230&highlight=epic+noob
Also next time, try not to ask questions that's not related to the thread subject.
thunderman98 said:
I flashed viper mod After ics ota was totally stock then having no problems so far but now how do I flash any roms?never had cwm on my transformer . So now what I would like to get revolver but stuck have a b70. Any help?
Click to expand...
Click to collapse
Go here.. http://forum.xda-developers.com/showthread.php?t=1346180
Download and install this app. Run the app and grant superuser access. Then flash the custom recovery. This will install cwm recovery. Then go to the development section and browse the custom roms. Download the rom of your choice, place on sd card, boot into recovery (shut down, then hold the volume down key and power key, then when prompted on screen, press the volume up key) Before flashing a new rom, u will want to do a full wipe first. (back up any needed data first) You will want to install from zip file. Choose the rom you downloaded, and now you have a custom rom installed.
Worked great
I was able to get my TF101 back to stock with this, really easy. Thanks.
kfhughes said:
I was able to get my TF101 back to stock with this, really easy. Thanks.
Click to expand...
Click to collapse
Of course it's really easy. I'm a dummy, too. I speak dummy language
This worked perfectly and it fixed my USB issue from flashing the repacked ICS update. I love that Asus made the App Backup tool so I could just restore all my apps without Titanium!! So awesome!! Thanks again!
This isn't working for me? when i install the .zip from the asus website it says its completed installation but when i boot the tablet back up nothing has cahnged and CWM remains ??? is it because i have a tf101g? Ive also tried flashing stock asus recovery and it seems to work but then when i reboot i still have CWM ??
Will this work if I flash the German over rooted ww-version?
Can't believe it will be that easy also I don't wanna brick my tab.
Sent from my Transformer TF101 using Tapatalk 2
Related
Hi
I'm going to update my a500 to 3.1
I have unrootedmy device but how to remove CWM completly????
Please help
Why don't just update via CWM:
http://forum.xda-developers.com/showthread.php?t=1154492
1) re root your device
2) go into acer recovery installer and reflash to the backed up recovery (or do the stock recovery for your version)
3) de root.
I had to do this to get my update to work.
Do you know where can I find stock recovery for my version?
I have Acer_A500_1.139.05_COM_GEN1
thank you!
simonsgray said:
1) re root your device
2) go into acer recovery installer and reflash to the backed up recovery (or do the stock recovery for your version)
3) de root.
I had to do this to get my update to work.
Click to expand...
Click to collapse
When i installed ARI, it backed up my current recovery. When i went back into ARI, my old recovery was the first option. Sorry, explanation sucks, i don't have screenshots for you. I know there are threads with most of the software/firmware elements of most of the different versions, maybe do some digging? This would be the best place to start: http://forum.xda-developers.com/showthread.php?t=1126364
Look in system/etc for a filed called install-recovery.sh. if its there change its permission from 444 to 544. Then reboot normally. It'll overwrite cwm with your stock recovery.
Sent from my A500 using Tapatalk
Thanks! I used stock one in ARI, woks good.
simonsgray said:
When i installed ARI, it backed up my current recovery. When i went back into ARI, my old recovery was the first option. Sorry, explanation sucks, i don't have screenshots for you. I know there are threads with most of the software/firmware elements of most of the different versions, maybe do some digging? This would be the best place to start: http://forum.xda-developers.com/showthread.php?t=1126364
Click to expand...
Click to collapse
Euclid's Brother said:
Look in system/etc for a filed called install-recovery.sh. if its there change its permission from 444 to 544. Then reboot normally. It'll overwrite cwm with your stock recovery.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Hi Euclid, are you able to post a copy of that install-recovery.sh file? I don't seem to have it in my system/bin anymore
...That is assuming the file is not unique to each device??
I'm thinking the reason my OTA update wouldnt install is because i dont have the stock recovery menu.
Thanks!
I really don't get why everyone is spazzing over this... If you've already taken the steps to root and install CWM in the first place, why not just install the stock 3.1 image that's been provided in the dev section? It's 100% stock, no need to wait for Acer to stop twiddling their dangly bits...
Floatingfatman, that is exactly what I did, and it worked perfectly. Good advise!
FloatingFatMan said:
I really don't get why everyone is spazzing over this... If you've already taken the steps to root and install CWM in the first place, why not just install the stock 3.1 image that's been provided in the dev section? It's 100% stock, no need to wait for Acer to stop twiddling their dangly bits...
Click to expand...
Click to collapse
Yeah thats what i ended up doing to update it to 3.1.
Reason i want it back to stock is that i couldnt update via OTA at all (downloads fine but install fails at ~20% with the ! in a red triangle).
I was hoping by restoring it to stock the OTA would work, and so any future updates could also be done via OTA as opposed to finding a workaround each time.
Other than that, it's working just fine for now.
Euclid's Brother said:
Look in system/etc for a filed called install-recovery.sh. if its there change its permission from 444 to 544. Then reboot normally. It'll overwrite cwm with your stock recovery.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
I don't understand 'change permission from 444 to 544'. Root Manager lets me choose between, 'Read, Write or Execute'. Could you please elaborate?
Thanks
Never mind. Problem solved.
I need some help unrooting and returning to stock. I rooted the device using the method of returning back to 3.1 and flashing the unstable rom then installing iconia root then acer recovery to install CWM. After rooting I did not make a backup of my device so I have lost the original rom. This is an Acer Iconia A500 with 8gb internal storage bought from Best Buy on black friday. I've read through many forums in the development area but since I have not posted enough times I can not ask a question there. Any help would be greatly appreciated.
todds67 said:
I need some help unrooting and returning to stock. I rooted the device using the method of returning back to 3.1 and flashing the unstable rom then installing iconia root then acer recovery to install CWM. After rooting I did not make a backup of my device so I have lost the original rom. This is an Acer Iconia A500 with 8gb internal storage bought from Best Buy on black friday. I've read through many forums in the development area but since I have not posted enough times I can not ask a question there. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Basically, when you run a full package stock rom, it should put your tablet back into stock condition. This will remove the custom recovery, just like it did when you downgraded.
You can find a list of the stock roms based on region at this link.
http://forum.xda-developers.com/showthread.php?t=1113878
Vache put some instructions there, and it's pretty simple.
Sorry, I'm new, and have the same question.
I am confused, for clarification ....
If you are unrooting and have Clock Work Mod Recovery what do you have to do?
I used Acer Recovery Installer from the market to install clock work mod. If I am unrooting and returning to sock, should I use the option to install "Stock USA 1.41.07_COM_GEN1 recovery" before flashing and then use the power/up button combination? Is it Ok to use Clock Work Mod to install one of the stock roms from the SD card or will Clock Work Mod cause a mess?
blancocar said:
Sorry, I'm new, and have the same question.
I am confused, for clarification ....
If you are unrooting and have Clock Work Mod Recovery what do you have to do?
I used Acer Recovery Installer from the market to install clock work mod. If I am unrooting and returning to sock, should I use the option to install "Stock USA 1.41.07_COM_GEN1 recovery" before flashing and then use the power/up button combination? Is it Ok to use Clock Work Mod to install one of the stock roms from the SD card or will Clock Work Mod cause a mess?
Click to expand...
Click to collapse
Vache has simple instructions on that page. As you read, it says to extract the update.zip file, put it to sd, then hold vol- and pwr. It should flash the rom, That's for the update zip..
However, I would use one of the full set roms.
When the stock rom runs, it should overwrite the CWM recovery, and re-instate the factory bootloader.
Here are the instructions direct from Vache's page for full rom.
"Here are some full packages, updates and EUU firmware from Acer OTA server and from some magical sources.
Full package and updates should be flash via the recovery.
EUU version are working in APX mode with nvflash. (you can enter in APX mode by booting the tablet with Reset / Power pressed)"
Now, what other recovery do you have to flash a full rom?
NOTE: I have not and have no plans to revert to stock. So I've never done this. You may want to post a question also in that thread to see if you can get any extra info.
Moscow Desire said:
Vache has simple instructions on that page. As you read, it says to extract the update.zip file, put it to sd, then hold vol- and pwr. It should flash the rom, That's for the update zip..
However, I would use one of the full set roms.
When the stock rom runs, it should overwrite the CWM recovery, and re-instate the factory bootloader.
Click to expand...
Click to collapse
You could also use the Downgrade tool with the original downgrade images. The original downgrade tool will put back factory recovery and factory stock. This would be everything you need to be totally stock. Once you get to stock, then you can just apply the OTA's if that's what you want. Or are you trying to get to stock and then root?
timmyDean said:
You could also use the Downgrade tool with the original downgrade images. The original downgrade tool will put back factory recovery and factory stock. This would be everything you need to be totally stock. Once you get to stock, then you can just apply the OTA's if that's what you want. Or are you trying to get to stock and then root?
Click to expand...
Click to collapse
Yeah, I keep forgetting about your tool.
I think they just want to get back to a stock condition without cwm and root.
You may want to post a link to the tool.
Finally got it. Used the Acer recovery tool to flash Acer stock recovery image and then extracted the update zip from the full package and put it on my SD card (made sure it was the only zip on the card) then redooted into recovery by holding down the volume up key and the power button. Update flashed and all is back to stock. Reasons for doing this were that I could not find a ROM that seemed like it was a real improvement over stock. My favorite would have been Thor's ROM mostly due to the ice cream sandwich tweaks and the ability to clear the recent apps drawer. May go back to root but wanted to know how to get back if necessary. Thanks for all the help.
Sent from my A500 using xda premium
todds, Which stock recovery image did you flash? and which update zip did you install after that?
i want to install the european (swedish) everything stock and would really appreciate some help.
todds67 said:
Finally got it. Used the Acer recovery tool to flash Acer stock recovery image and then extracted the update zip from the full package and put it on my SD card (made sure it was the only zip on the card) then redooted into recovery by holding down the volume up key and the power button. Update flashed and all is back to stock. Reasons for doing this were that I could not find a ROM that seemed like it was a real improvement over stock. My favorite would have been Thor's ROM mostly due to the ice cream sandwich tweaks and the ability to clear the recent apps drawer. May go back to root but wanted to know how to get back if necessary. Thanks for all the help.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Glad it worked for you!
Vache should be a touch more clear on "which" recovery to use for the full package
Although it seems people used both CWM and Acer Recovery. (he just states "recovery")
Glad you cleared that up
---------- Post added at 10:26 AM ---------- Previous post was at 10:10 AM ----------
sydeu said:
todds, Which stock recovery image did you flash? and which update zip did you install after that?
i want to install the european (swedish) everything stock and would really appreciate some help.
Click to expand...
Click to collapse
@sydeu, you probably want to run Acer_A501_4.037.01_EMEA_TMPL. Note this is for the 501 so not sure if you are looking for a 501 or 500 stock rom.
I run it on my 501, and it has svetski lauguage support.
I think you can use any of the EMEA roms. You can unpack or decrypt the roms before flashing, and check the ldb files (system\usr\xt9\databases\ldb\) You should see an ldb that usually starts or contains "Sv". I think these are related to the keyboard, but it will have system support for the language.
Not all roms and updates are listed there, those are just the ones people were able to find. So get the one that's closest to your needs.
I have Asus Transformer TF101 which has 4.03 on it and build 9.2.1.27 installed, I would like to give the above rom a try. I have rooted it and according to root checker it is rooted and as superuser 3.1.3 installed and busybox.1.7.1 on it. I beleave I now have to install clockwork recovery on it. Which version do i need for this build and do I need to make any backups before flashing rom. I am new to this and dont want to brick the transformer.
with thanks
Mickr
mickr said:
I have Asus Transformer TF101 which has 4.03 on it and build 9.2.1.27 installed, I would like to give the above rom a try. I have rooted it and according to root checker it is rooted and as superuser 3.1.3 installed and busybox.1.7.1 on it. I beleave I now have to install clockwork recovery on it. Which version do i need for this build and do I need to make any backups before flashing rom. I am new to this and dont want to brick the transformer.
with thanks
Mickr
Click to expand...
Click to collapse
You should always make a nandroid.
You downlaoad the latest arhd and super wipe first.
Go to recovery mode
Flash super wipe first
Then arhd
Then reboot device
Sent from my Transformer TF101 using xda app-developers app
P00t said:
You should always make a nandroid.
You downlaoad the latest arhd and super wipe first.
Go to recovery mode
Flash super wipe first
Then arhd
Then reboot device
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
When trying to flash super wipe lite, the screen just gets stuck on step 4, which is the data partition (although the thread states lite is only supposed to wipe system and cache)... Isn't there an image file I can just flash with adb? Or maybe this recoveryblob file I have...
rockingondrums said:
When trying to flash super wipe lite, the screen just gets stuck on step 4, which is the data partition (although the thread states lite is only supposed to wipe system and cache)... Isn't there an image file I can just flash with adb? Or maybe this recoveryblob file I have...
Click to expand...
Click to collapse
Ive heard about the bug on lite version where it gets stuck.
You should just use the full version.
Sent from my Transformer TF101 using xda app-developers app
I am also about to load Android Revolution on to my stock 8.6.5.21 (HC3.1) non-root.
But I would like to either backup or download a copy of the stock ROM 8.6.5.21, (apparently the last working stock ROM) before proceeding.
However, no stock ROM 8.6.5.21 can be found on the Asus website. AFAIK, ROM backup tools require root, which I don't have. If I root, that would change the rom before I can backup.
I need some suggestions.
up, any ideas?
Hi,
atm, I have an A501 with CWM-based Recovery v5.5.0.x(thor2002ro rev1.7) and Android 3.2 (EMEA CUS7 - Germany).
My Tab tells me that there is an update, which I downloaded and tried to install. However, after a few seconds an Android with a red exclamation mark appears and the installation of the updates aborts.
So, I want to remove CWM Recovery and root and return to a stock rom. However, that seems impossible. I downloaded the Acer Recovery Installer App but this one offers me a USA A500 stock rom - but I need an A501 rom because of 3g.
When I try to install this one (http://forum.xda-developers.com/showthread.php?t=1234039) I decrypted before, CWM tells me
"Installating update...
Installation aborted"
So, this does not work either.
I am really desperate because I have to revert to a stock rom...
Can someone please, please, please help me out?
lamajstro said:
Hi,
My Tab tells me that there is an update, which I downloaded and tried to install. However, after a few seconds an Android with a red exclamation mark appears and the installation of the updates aborts.
Click to expand...
Click to collapse
The update has overwritten yr custom recovery with the Acer stock recovery. It also checks yr system files if it ain't completely stock it will abort. being rooted can also affect the update.
but I need an A501 rom because of 3g.
When I try to install this one (http://forum.xda-developers.com/showthread.php?t=1234039) I decrypted before, CWM tells me
"Installating update...
Installation aborted";
Click to expand...
Click to collapse
Did u install cwm again from Acer recovery installer b4 flashing. the rom?
I'm unfamiliar with the 501 and what stock Roms are available for it
Search xda for vache full ota update packages and see if there's one that thread
So, I want to remove CWM Recovery and root and return to a stock rom.
Click to expand...
Click to collapse
Why not give HC the flick and upgrade to a custom ICS rom?
dibb_nz said:
The update has overwritten yr custom recovery with the Acer stock recovery. It also checks yr system files if it ain't completely stock it will abort. being rooted can also affect the update.
Did u install cwm again from Acer recovery installer b4 flashing. the rom?
I'm unfamiliar with the 501 and what stock Roms are available for it
Search xda for vache full ota update packages and see if there's one that thread
Why not give HC the flick and upgrade to a custom ICS rom?
Click to expand...
Click to collapse
Thank you a lot for your answer!
Yes, I did install cwm again from acer recovery installer, but that did not change anything.
Unfortunately none of the roms offered on xda work, they all abort in cwm and I don't know why.
I would prefer to go back to a stock rom with stock recovery because I want to give the tab to someone else.
lamajstro said:
Thank you a lot for your answer!
Yes, I did install cwm again from acer recovery installer, but that did not change anything.
Unfortunately none of the roms offered on xda work, they all abort in cwm and I don't know why.
I would prefer to go back to a stock rom with stock recovery because I want to give the tab to someone else.
Click to expand...
Click to collapse
Yeah, you may have difficulties flashing full packages via CWM. Especially if you didn't decrypt the rom first.
I've got a few 501 roms you can try. All HC 3.2.
One of them, is an ATT full package update which will probably work for you. Just pull the update.zip out of it. Put it on your Ext SD card, and boot holding PWR and Vol+. This will force it to install update.zip from the SD card.
Any rom you use, you have to decrypt it first. Some try renaming the rom to update.zip, and some have success using this method.
Like I say, it's an AT&T rom, but is probably really a ComGen 1. So it should have decent language support.
If you're interested, I can throw them up on a server tomorrow.
But I tell you this first, before you go messing around with these things. GET YOUR UID Number first, and write it down. You can get instructions on UID in the Development Forum, 1st page usually. It's easy.
MD
lamajstro said:
Thank you a lot for your answer!
Yes, I did install cwm again from acer recovery installer, but that did not change anything.
Unfortunately none of the roms offered on xda work, they all abort in cwm and I don't know why.
I would prefer to go back to a stock rom with stock recovery because I want to give the tab to someone else.
Click to expand...
Click to collapse
Sent from my A500 using Tapatalk 2
No probs!!
U must use a "update.zip" , decrypted first as Moscow said, and booting into recovery via button combo may help too,
also remember to remove the zip file off the ext. sdcard when you are done!!
....good luck
I pulled this from my phone and posted it in the other thread, and someone suggested I make a thread for it. Here it is!
http://j2cool.com/mirror/files/Blur_Version.139.15.1.ghost_verizon.Verizon.en.US.zip
To install, you will need to be on the latest OTA (camera update).
Fastboot flash the original system.img and recovery,img
You can then use the volume down key to select "Recovery"
Once in recovery, press the power button and volume buttons together to bring up the menu,and select "Install from SDcard"
You can then select the OTA, and install it. Your phone will reboot, and you will have to do this again from the new recovery. You should then be able to reboot system and have your new 4.4 Kitkat Moto X!
Sent from my XT1060 using Tapatalk
Whoops. Replied while trying to edit. Mobile forum use is a pain.
Sent from my XT1060 using Tapatalk
Chrome says this file is dangerous
km8j said:
Chrome says this file is dangerous
Click to expand...
Click to collapse
Chrome is smart, Chrome knows a Verizon update image is too good to be true :laugh:
What's the install method for VZW Dev Ed?
Flash system.img but not boot.img?
Mercutio5 said:
What's the install method for VZW Dev Ed?
Flash system.img but not boot.img?
Click to expand...
Click to collapse
You don't need boot.img in either. Now, I don't know how the dev ed works, maybe it's just the exact same with an unlocked bootloader, so let me know how installing goes.
km8j said:
Chrome says this file is dangerous
Click to expand...
Click to collapse
Because it's a large zip file from somewhere no one has downloaded before. I promise you, it's safe and clean though.
Mercutio5 said:
What's the install method for VZW Dev Ed?
Flash system.img but not boot.img?
Click to expand...
Click to collapse
Dev edition you can install like any other device. The benefit is that you can flash custom files without recovery flipping its ****.
Sent from my XT1080MDEV.
Will this work on GSM dev edition?
tesselator said:
Will this work on GSM dev edition?
Click to expand...
Click to collapse
Only if you want to break your phone.
This is for Verizon.
Whats the procedure for flashing this on a rooted verizon dev edition
Gs0230 said:
Whats the procedure for flashing this on a rooted verizon dev edition
Click to expand...
Click to collapse
Put the zip in internal storage. Go into stock recovery, install zip, choose this update zip. Because one of the first things it does it flash a new recovery, you have to go into recovery again and install zip again (the second time around it knows it doesn't have to flash the recovery).
Of course, since this way uses stock recovery, you have to be running stock.
I'm on stock just rooted with unlocked bootloader twrp 2.6.3 installed will I lose root
Sent from my XT1060 using XDA Premium 4 mobile app
Gs0230 said:
I'm on stock just rooted with unlocked bootloader twrp 2.6.3 installed will I lose root
Sent from my XT1060 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to use stock recovery. After the update u can install twrp and root again
Can I keep root and how do i revert to stock recovery
Gs0230 said:
I'm on stock just rooted with unlocked bootloader twrp 2.6.3 installed will I lose root
Sent from my XT1060 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, you're going to lose root (the update will wipe out System). If you have an unlocked bootloader then it isn't a big deal -- just re-root after the update.
BUT don't try to flash this update with twrp installed. 1) I'm pretty sure it won't work anyway b/c it needs to verify that your System is stock and, at the very least, installing twrp changes the install-recovery script which is in System 2) this .zip file is made to be flashed from a stock recovery, so I'm not sure it would work 3) as I said before, part of this update is a new recovery - I'm not sure how well the process would go if you started from twrp
And how would I root after its done
Gs0230 said:
And how would I root after its done
Click to expand...
Click to collapse
The same way you rooted before?
I'm sorry, I've been assuming you have a Dev edition b/c you said you had twrp -- is that not the case? If you do NOT have a dev edition and you rooted via pwn- or rock- or whatever its called myMoto then NO, you will NOT be able to root after the update until someone releases another hack
piccit said:
Put the zip in internal storage. Go into stock recovery, install zip, choose this update zip. Because one of the first things it does it flash a new recovery, you have to go into recovery again and install zip again (the second time around it knows it doesn't have to flash the recovery).
Of course, since this way uses stock recovery, you have to be running stock.
Click to expand...
Click to collapse
I got this the second time (with the new recovery):
"Install aborted"
:|
Maybe the battery level is too low, so i'm gonna charge it a little and see what happens
PS: the "normal" OTA is downloading SO slow D: that's why i'm trying the one in this thread
------EDIT----
For some reason the download speed just increased, so i'm staying with it
I cannot flash this in TWRP right?