Database Users

Niki touch screen not working when slider is open

Anyone here experiencing the same problem? At first I thought that was normal, but at some point the touch screen worked while the slider was open and I was really happy with it but now, it no longer works what gives?

am i the only one experiencing this? do you think a ROM upgrade can fix this?

Sometimes (very rarely) the screen doesnt come on and I have to reset, but nothing like you descrived, sorry...

aw! i guess i have an isolated case. thanks twolf!

it's a screen cable problem. just fix it

last week, i had the same proplem. So i sent it to the guarantee service. They replaced the cable, which is connecting the screen with mainboard.

too bad my phone doesn't come with warranty. thanks for the info guys

my phone has the same problem,and I had used many roms, and all of them have the same problem.

my screen isen't working when the keybord is closed,
aneybody have the same problem??

problem
yes i do have the same problem ... my htc niki100 was not working when slide closed ... but when i open it works fine .... sometimes when slide open also it is not working i mean the touch screen ... i removed all parts of my htc niki and i take a look at that but all was fine and i dont know what was the probelm... i think htc failure model is niki... really pissd off guys due to this niki ... if any came to know how to make work that ... just post it and for u i am thankuful..

it is hardware problem. sent my device to service center and they changed the board for free since it is still under warranty. they said it was wear and tear. so it is only matter of time before the new board suffers from wearing out again. unless stop using the sliding keyboard, but tat's the main selling point touch dual is built for =\

how much is the cable $$ connecting the lcd to the boarD?
my niki is out of warranty............can any mobile phone repair shop fix it ?

yawn said:
it is hardware problem. sent my device to service center and they changed the board for free since it is still under warranty. they said it was wear and tear. so it is only matter of time before the new board suffers from wearing out again. unless stop using the sliding keyboard, but tat's the main selling point touch dual is built for =\
Click to expand...
Click to collapse
If you google around you'll see this is quite a common complaint with the Touch Dual. There seems to be a certain flaw with the screen and cable which was never addressed. I had the exact same problem & eventually sent the phone back to HTC to be fixed.
Be warned though - HTC would not fix my phone eventhough it was still under warranty. They said the problem was due to User Mis-Use. My ass it was. I argued it out with them but in the end I just paid the UK£60 to get it fixed - robbing bastards!

You all seem to think it's a hardware issue, and I'm experiencing the same issue, but only under Windows Mobile (I've tried both 6.1 and 6.5 - all sorts of various roms). Android on the other hand, works fine. :/
EDIT:
Well now it's working on Windows too. After I ran Android... SO GIVE THAT A SHOT I GUESS. o.o

Hi
I've got the same problem it's starting to piss me off.. :[email protected]
1) screen doesn't work when slider is opened
2) screen doesn't work at all at times but works again after ....??? xx hours or so.
My warranty has ended, any tips?
Upgraded Windows Mobile to official WM6.1 from HTC.com website.

DrOni(on) said:
You all seem to think it's a hardware issue, and I'm experiencing the same issue, but only under Windows Mobile (I've tried both 6.1 and 6.5 - all sorts of various roms). Android on the other hand, works fine. :/
EDIT:
Well now it's working on Windows too. After I ran Android... SO GIVE THAT A SHOT I GUESS. o.o
Click to expand...
Click to collapse
i came in here to say the same thing.. weird. works fine in android.............

another thing worth noting is that if you keep a finger on the screen while sliding it seems to work everytime

My Niki has the same problem, when slide is open i cannot use the "send" button on the touch screen - so i have to close the slide, to send a SMS.
I bought a HTC Snap now, so my NIKI just lies in the drawer...
Sad, i like the Screen resolution and Rom software on the Niki better than the HTC Snap.
At http://www.ppctechs.com/HTC-Nike_1047/repairs.htm you can buy a HTC Nike ToolKit with special screwdrivers, maybe the cable just needs to be aligned properly, or fixed in a socket...
Has anyone tried to fix it themselves?

guys,
I had the same problem. In fact, my touch screen was totally not working at all. Some threat recon it's loosen cable so i opened my touch dual and tighten the lcd flex cable. It worked after that, but not working when slide is open. I've just changed the flex cable myself and it's working fine now. hope this help.

xiufoong said:
guys,
I had the same problem. In fact, my touch screen was totally not working at all. Some threat recon it's loosen cable so i opened my touch dual and tighten the lcd flex cable. It worked after that, but not working when slide is open. I've just changed the flex cable myself and it's working fine now. hope this help.
Click to expand...
Click to collapse
could you guide me how to fix it? I'm having this problem as well.
Do you have any kind of link as to how to open the niki, screws, cable, where to look etc...?
thanks!

touch screen not responsive

Hey guys, my freind had a sprint Vogue and the touch screen quit working so he gave it to me. Every thing works fine but that. Iv hard reset, reflashed,tried to operate it through MyMobiler, banged it on the computer desk. Nothing works. any ideas or do I just have a new paper weight? Hes already went to sprint and said he lost it and got a new one so sprint will be no help. I really just wanted it for a genuia pig. but its no use when its stuck at the setup screen.
Thanks

Had this problem before, I remember turning the power on, trying the screen, turning it off, on trying again and etc... it worked after a few rigorous tries.

Iv turned it on and off probably 100 times and still no luck. plus the hard reset and reflash

You could try replacing the screen with a spare part from...somewhere. Not much more I can say, that's about as far as my knowledge goes.

Thanks, Im hoping it dont come to that

Sounds like a dead digitizer. You're going to have to either find a new digitizer and going through the hassle of replacing it or replace the entire screen.

which part is the digitizer. I had the same problem with my vogue and bought a part off ebay which i was 99% sure was the problem. its the small electrical board underneath the dpad. There is a connection that the ribbon from the outer screen connects too.. Does anyone know where i can find a replacement for that part. The one I got from ebay looked exactly like the one from my vogue but when i plugged it in it would cause my phone to shut off. They said it was for the GSM touch not the CDMA

HTC HD2 Screen Unresponsive

Hello Gents and Gals. I am trying to fix my friends HD2, I flashed his ROM with Energy couple of months ago and all was working fine. He gave the phone back to me saying that it is locked.
I tried unlocking the phone but it seems that the screen is unresponsive, so I flashed it again by going into the boot loader screen "Volume Up + Power Button". The phone stated that it is starting for the first time but the screen was still unresponsive. Any ideas on how to fix this issue? Or do I need to tell him to send the phone back to HTC for repairs?

Sounds like the touch screen died ....
Time for a repair ..
Also this really should have been posted in general , as it is not a ROM release , just an FYI

Aww okay. I'll let him know. Thanks.
I'll post like this in General next time. Tks.

HI, I have now the same problem after ROM Flashed, did you solve the problem by yourself, or really the touch screen died.
Rgds

Same thing with me. I ordered new digitizer+LCD and changed them, but the screen is still unresponsive. Other ROM didn't help.
Some advices?

i seen this happen with several phones, reflash to stock and send to HTC they will repair it for free.

I have same problem,yet my phone was bought 18 months ago...worked perfectly until now.
Can a touch screen get defective after normal usage ?

alexandruvlad said:
I have same problem,yet my phone was bought 18 months ago...worked perfectly until now.
Can a touch screen get defective after normal usage ?
Click to expand...
Click to collapse
Yes it can, if your touch functionality of your HD2 has stopped working then your digitizer has probably went out.

T-Macgnolia said:
Yes it can, if your touch functionality of your HD2 has stopped working then your digitizer has probably went out.
Click to expand...
Click to collapse
Yeah,that's what i thought too - but i read some situations where replaced LCD + Digitizers didn't solve this problem.....

alexandruvlad said:
Yeah,that's what i thought too - but i read some situations where replaced LCD + Digitizers didn't solve this problem.....
Click to expand...
Click to collapse
This is usually due to the replacement components not being properly installed. Also when one is working with the internals they have to be very careful as some of the internals are very easy to break without you even knowing you did. So the cases you spec of are more than likely not because it was not the Digitizer or LCD was not the problem, but human error.

i fixed mine and it didnt cost me
the unresponsive screen maybe the digitizer buts its more likey the end call button, believe it or not dirt can get behind the contact or because the back button is next to we use the far edge of the end call button thus leading to bending the contact, when any of this happens your screen will be unresponsive
you can either take it to a shop and pay for a new screen and digitizer or take it apart and clean the contacts
go to ifixit for step by step guides
hope that helps

Intrigued
dgr1983 said:
... buts its more likey the end call button, believe it or not dirt can get behind the contact or because the back button is next to we use the far edge of the end call button thus leading to bending the contact, when any of this happens your screen will be unresponsive
Click to expand...
Click to collapse
I have no idea what are you talking about, that doesn't make sense, as far as I know is no direct relation between END button and (non-working/responding) touchscreen: you may even disconnect/replace bottom buttons ribbon/flex from motherboard and touchscreen will work if OK(or not, if defective).
Is there anybody who can confirm this(or not)?

3 weeks ago I had a LCD/digitizer replaced (cracked screen, but was still working) all was great till 2 days ago. Screen stopped working - took it back to the place I had replace the screen and they tried 3 brand new screens and still no go. Ended up being my main board - luckily I had a spare HD2 and they pulled that board and all is well again.
Believe it or not your LCD/digitizer might be fine - find someone or a way to test main board would be where I would start after the last 3 days.
Good luck
PS - I did NOT try the end button idea prior to the repair.
Zergalot

zergalot said:
3 weeks ago I had a LCD/digitizer replaced (cracked screen, but was still working) all was great till 2 days ago. Screen stopped working - took it back to the place I had replace the screen and they tried 3 brand new screens and still no go. Ended up being my main board - luckily I had a spare HD2 and they pulled that board and all is well again.
Believe it or not your LCD/digitizer might be fine - find someone or a way to test main board would be where I would start after the last 3 days.
Good luck
PS - I did NOT try the end button idea prior to the repair.
Zergalot
Click to expand...
Click to collapse
If still in your possession, I would be interested to buy the motherboard you just replaced!
PM me if interested!

htc hd2 screen died
I also have a 2009 htc hd2 on which screen does not work.
I'd like to know if it's
- a common problem
- is it possible that it's a software (flashing) issue
- can it be replaced and for how much

martinmartiini said:
I also have a 2009 htc hd2 on which screen does not work.
I'd like to know if it's
- a common problem
- is it possible that it's a software (flashing) issue
- can it be replaced and for how much
Click to expand...
Click to collapse
From my own experience :
1. It's a common issue, there are hundreds of reports in this forum and I read them all because I had the same problem some months ago
2. Probably not. It's generally hardware-related and often the digitizer (touch responsive screen) . Brief explanation : There's a flaw in the design of the HD2, the thin cable wiring the digitizer to the motherboard, is just below the power button. After some extensive use of your powerbutton, it might happen that the power button touches the cable and cause some kind of shortcut in it which makes the digitizer unresponsive to the motherboard.
3. I replaced mine here : http://www.htcphonerepairs.co.uk/ . Fast repair, secure shipping to Belgium, good price and excellent customer support. (Sounds like advertizing but I swear to be only a happy customer )
There are also multiple videos on youtube explaining how replacing the digitizer yourself if you dare !
Also, I read answers saying that you can somewhat "play" with your buttons (especially the power one) to turnaround the problem. That's correct, BUT it's absolutely inevitable that the problem with come back again if you use the buttons, and you'll have to force more and more to unblock again and repeat again and a again... and that will damage your button bar.
I did this during almost 2 months and that put down all my buttons and now they are really close to the chassis which is very annoying. If only I knew it before I would have replaced the digitizer directly !
For 6 months with my new digitizer + using ICS with soft buttons, I have no problem at all !

bib*oops said:
I have no idea what are you talking about, that doesn't make sense, as far as I know is no direct relation between END button and (non-working/responding) touchscreen: you may even disconnect/replace bottom buttons ribbon/flex from motherboard and touchscreen will work if OK(or not, if defective).
Is there anybody who can confirm this(or not)?
Click to expand...
Click to collapse
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.

Sneakyghost said:
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Click to expand...
Click to collapse
This is truth. Save yourself some time and frustration and repair it or get it repaired. It's a great phone.

Sneakyghost said:
Just because this dude has "no idea" it doesn't mean he knows it better.
It IS the END button that gets pressed too often and at some point it begins to mess with the digitizer connection. It can be dirt. It can just be the cable came lose and needs tightening, it can be wear-out.
whatever it is, it is caused by the end-key being too close to the connector cable.
If you guys only searched for this on the HD2 Forums before posting this Thread hat not been necessary. It is the most well known design flaw of the HD2 and as such well documented and commented here.
Click to expand...
Click to collapse
You didn't get it right or at all:
END key may determine touchscreen failure along the time(being the CAUSE! of this), but the EFFECT is an unusable touchscreen, which cannot be repaired in any other way than replacing it(the touchscreen!!, I mean).
Any other attempt to repair, clean, bend, press, cut or whatever WILL NOT FIX an already faulty touchscreen (even caused by END button excessive or not usage) and who thinks otherwise, no problem with me: SWEET DREAMS!

You sound like my comment hurt you. Sorry if it did. I'm not one hundred percent sure that this issue can be fixed without replacing the screen, yet fairly certain. I've now disassembled two HD2 and couldn't quite find the precise spot where the damage occurred, yet after properly assembling the devices again, one came back alive, the other not. The one which has the screen and buttons not working right is the one that got thrown at me by a kind person. It most likely has physical damage somewhere, although I couldn't locate it. The other one didn't get damage and has screen and buttons work well after complete disassembly and assembly.
Both devices also have different screen types.
I now gave up both devices and am withdrawing myself from the HD2 world. Too many issues with the devices getting old.
sent from the tip of my finger

Unresponsive touch screen :(

The top part of my phone does not respond to touch anymore... it is impossible to bring down the notification bar... and once in a while the whole screen goes unresponsive.. tried factory reset but still the same problem..

am having the same problem since 2 days back
after reading some of the posts i found that the Digitizer For HTC G6 Legend A6363 should be replaced with new one i ordered mine from ebay
ebay.com/sch/i.html?_from=R40&_trksid=p5039.m570.l1313&_nkw=Digitizer+For+HTC+G6+Legend+A6363&_sacat=See-All-Categories
waiting for the item to be delivered

I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/

nnssxx said:
I've also got a touchscreen issue: the area of the notification power widgets is unresponsive... the rest of the screen works fine, but I don't know for how long :/
Click to expand...
Click to collapse
Do you have widgetlocker, by any chance ?
Or a lockscreen replacement which disable the notification bar during the "slide to unlock" state ?

I didn't know there was such thing as widgetlocker. I use CM7 latest nightly, never seen that thing.

I also facing this problem from last 2 weeks and i also think this is digitizer problem. If anyone else found the solution else changing the digitizer, then please post.
This is beautiful phone but htc added a poor quality things in it, due to which many users facing such problems.

Nah.. I dont think its because of widget locker.. its the digitizer..

well that's a shame, gotta buy a new digitizer on ebay after just over 1 year of use...

I know.. this sucks... Im planning to upgrade though.. Any of u guys have any suggestion?

Depends on your carrier if you want suggestions for an upgrade.
...but that would drive the post off-topic.
Sent from my HTC Legend using XDA App

I have the same problem. my screen doesnt work anymore because some water got in from the grill above the screen :S
should I try to take apart and dry off or shall I buy a new digitizer directly?

I think it may be a good idea to try disconnecting your digitizer and reconnect it as it just might be helping. I did it on my girlfriends legend and it has been working perfectly ever since. Maybe a good idea to at least try that before buying a new one. So i guess it could be in the connector to? At least this worked for me.

My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??

Earayil said:
My touch screen dosent work at times. but after rebooting the phone the problem becomes solved. But the problem comes again after a week or so. Any suggestions guys??
Click to expand...
Click to collapse
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.

My problem got worse and the phone became totally unresponsive, changed it, got a new phone.

Tanayar said:
I also have this problem, but if I wait a couple of minutes the touchscreen
becomes responsive again. Half of the screen works when it's unresponsive (right half of the notification bar and down). It's quite annoying but I cannot afford a new phone at the moment.
I'm also wondering if this might be temperature related, this problem reoccurred very often during the summer but stopped during the winter. But now (spring) it's back again.
Click to expand...
Click to collapse
exact same problem here, mine works when it feels like working, totally random, I simply can't understand why, I doubt it's the temperature... I think its in the device theres something wrong, I smack it numerous time and it works right after a big smack on the screen, or rub your whole hands on the screen, also, the angle you are holding the phone affects this problem, if none of these work, a phone restart always makes it work at the beginning. Oh boy did my phone took and taking much beating... oh well, I wish I could permanatly fixed the problem here, as I was thinking of handing the phone to my brother when I upgrade, I'm using CM 6.1.

I still recommend the same thing that i posted earlier here, her screen still works perfect.

I had the same problem few months ago. The problem is with the touch digitizer. I bought a digitizer on ebay and replaced it myself. After that my phone has been working fine. Its not that hard to replace it if you have a small knowledge about hardware.

I use to get that unresponsive screen issue only in the summertime, plus it gets worse if I add humidity (read: sweat). I just need to give it some time then to dry off/ cool down outside my pocket, and it's all fine again.

Some help trying to fix a Motorola Defy?

Hello, I have a Motorola Defy, that I dropped a few times, so the LCD screen got damaged with blue dots on it, I made a mistake and thought that the problem was on the touch Screen, so I purchased a replacement, installed but, it was damaged, the touch did not respond correctly, I wasn't able to type correctly among other problems.
I got a refund, then ordered a LCD screen replacement, now that I have it here, I install it, and it's broken:crying: I know, bad luck and being a rookie while trying to fix my phone, ok, I put back my old (damaged) LCD screen to use it in the meantime, and the old touch screen, but now, the old touch screen that was supposed to being working fine, it doesn't, it has the same problem as the touch screen that I bought.
Question is: the problem with the touch screen, could be related to the damaged LCD screen? or the motherboard of the phone is damaged? the phone works great, the apps, the games, everything but the touch screen and the LCD screen, but, as I said, I went back to the default touch screen after using the damaged one that I received, and it works worse I don't know what's wrong, please help me out, sorry for the long post

Please post questions in the Q&A section. Moved there.

Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app

ppero196 said:
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Is this true?

true. fix some minor dead pixel if you put in freezer for one day. but your case... im dont hope much.

Try changing LCD + Capacitive Digitizer. (after trying the freezer trick ofcourse)

Well i will tell my story, which is related to your's as well,
i had a phone with resistive touch screen and it got screwed up, that is it does not respond correctly. So, i took it to the service center and they replaced the digitizer (touch screen) saying that previous one is broken. But, luckily the new one didn't responded to any touches they make.So, they replaced it again with the old one quoting that "your phone can't be repaired". So, i took it home with me.
Later i thought to calibrate the screen but the old one is not responding any more, no matter where i press
Later i calibrate it with the help of a software for windows mobile with the help of a PC. It took me to the calibration screen, from where i calibrated it, and voila, it worked... as good as a new one :victory:
long story short,
i think when you disconnected your digitizer, phones default values/drivers got messed up and are unable to find the new or the old digitizer you connect. I suggest you to go to the service center as these screens can not be calibrated.

Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!

saman0suke1 said:
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
Click to expand...
Click to collapse
Did you change the LCD and the Digitizer (both of em) again ?

dark_prince said:
Did you change the LCD and the Digitizer (both of em) again ?
Click to expand...
Click to collapse
I replaced my original digitizer screen for the one I ordered it, it gave me problems, so I went back to the original one, which was working fine, and now it's not fully responding, that's why I'm assuming is something calibration related, thanks!

help
my search button back light is not glowing ..i saw it is also not glowing in recovery...any help