Ok i booted CoreDroid on my HD2 along time ago, i cannot remember what i did exactly, but since then the USB has also stopped working and now it stalls on the boot screen where it has the logos.
What can i do to fix this? do i need to put a new version on? if so how would i do that without usb?
Related
Hi,
When my HD2 boots the wifi is switched on. This did not happen untill i flashed the 2.01 rom on to the device is there a cab that will stop the wifi service starting on boot?
Cheers
I think that's because you didn't get the starting wizard after flash (had the same problem with some custom ROM based on 2.01/2.02).
Try to put your Leo in plane mode, the startup wizard should come up. Go till the end of the wizard and then reboot to see if it still happens.
Let us know.
Hi
Thank you for your advice i have tried what you have suggested and it worked fine so thanks
http://forum.xda-developers.com/showthread.php?p=5492832&posted=1#post5492832
Same problem man.
Got onto HTC and they said they expect people turning the phone on the first time to have no SIM in, hence why airplane mode would show it
Hi all, started to try and get phone onto android last night.
Followed the guide for HSPL3 then started started to update radio but got error about USB!
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
The device boots ok and i get windows (eventualy! if i wait) Once booted into windows USB works but in the bootloader i cant get USB!
I have pressed volume down and red button and in white box it stays on serial!
I have googled for hours any pointers?
GazWales said:
Booted into boot screen to see whats going on (volume down) and it wont go past loading! just sits saying loading!
Click to expand...
Click to collapse
grey screen, writing in blue? sounds like it thinks you have a rom on your sd card. try it without the sd card in.
Thanks for you suggestion - tired that already should have said.
The issue is fixed however - I took out SIM aswell as SD, manualy booted to loader. Waited 5 min then it changed to USB! Quickly opened HSPL3 an re flashed.
Issue was still the same! So followed same procedure and used HSPL 1.6 that fixed it! I can then flash with a rom suitable for Android!
Flashed 4 min later, put Android on - now loving my new phone - its amazing the difference! This is how the HTC HD2 should have been!
heh, lucky you, i've tried android on 6 different occasions now, first four times i wasted some hours and never got it to boot, 5th and 6th time it worked, but when i restarted, the phone wouldn't restart without a hard reset, so i'm not touching it again for at least another three months.
Thanks. Your solution worked great. As soon as I pulled the SIM and waited a few minutes it popped right up. You should mark this thread title as solved
@samsamuel try using nand its alot easier to install and there are some great builds on this website!
Sent from my Gingerbreaded HTC HD2 using XDA App
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
klumpbatsch said:
Hi there,
the problem is not solved for me!
I flashed my HD2 several times before, using winXP. Now I got a new laptop with
Win 7 64 bit. I want to flash my phone with a WM6.5 Dutty ROM. The phone syncs fine when running but when it switches to bootloader, the laptop doesn't recognize the phone anymore. It does not switch to USB and on the Laptop I get the message that there is no driver for "Qualcomm CDMA technologies MSM"
Help please, I tried to find some answers but couldn't find anything!
Thanks.
Click to expand...
Click to collapse
Mate, check my suggestion at your other post (you started a new thread today!)
hi i know alot of people are having problems with thier phone being stuck on the boot screen after they just flashed a rom well i have a different problem, my problem is i flashed a nrg rom the mikes hard sense rom i think thats wat it is called not sure but it flashed fine and the phone worked perfectly but two weeks later it now is stuck on the boot screen all of the sudden i went to the boot loader screen and connected to my usb but it does not show that i am activesync any help on how to fix this or maybe im doing it wrong please help
U weird... not even on the tri color screen is detected? Look at the tri color screen if it displays USB and not serial, ur good to go for flasing, Tried another port? Cable? Wich os are u using on the PC xp, vista or seven? Does the radio, protocol and build numbers appear? Wich radio are u using? Tried flashing from SD? CAREFUL with this though if u flash via sd a stock rom it will overwrite the hspl
Sent from my HTC bravo using XDA App
rollarobot said:
hi i know alot of people are having problems with thier phone being stuck on the boot screen after they just flashed a rom well i have a different problem, my problem is i flashed a nrg rom the mikes hard sense rom i think thats wat it is called not sure but it flashed fine and the phone worked perfectly but two weeks later it now is stuck on the boot screen all of the sudden i went to the boot loader screen and connected to my usb but it does not show that i am activesync any help on how to fix this or maybe im doing it wrong please help
Click to expand...
Click to collapse
Re-install drivers...
Disable activesync usb connections, task29
Hi guys, I know there are some threads about "stuck on bootscreen" but my problem is a little different i think. I'm using a flashed HD2 with Windows Phone 7.5 from Pdaimatejam. So everything worked really good for almost 6 months, since I flashed the device. Today I was driving in my car and needed to recharge my phone. So I used the Adapter for my car and my phone didn't recharge, it went on and off for 3 times and since then it's stuck in the bootscreen (the "htc - quietly brilliant screen with the colorful "i <3 windows Phone" sign) Now I am back at home and tried to charge it as usual with the normal AC plug. The same. Tried to charge it at my PC. The same. It is stuck at the bootscreen.
Any ideas whats wrong? And what I can do??
Please help!?!
OK, I did a hard-reset and put the ROM on my phone once more. And now it works again! I just wonder how I can install different languages from the .cab file to my new HD2 Pdaimatejam Wp7.5 v8.1 ?!
OK, so even though no is responding on my post I will write down my experience. So I updated my HD2 from pdaimatejam v6.5 to the new v8.1 and it worked at first. I also figured out how to install the .cab file with the german language but after I did this some of the apps didn't work anymore. So final story I switched back to the old v6.5.
Does somebody know why the german language .cab update messed up my ROM?
Hi,
My phone was working absolutely normal for about a year but suddenly yesterday morning I found it stuck on 'BLINKING SAMSUNG LOGO'. I left it on charge overnight. It was absolutely shocking and I did everything possible to wake it up but It didnt show up. I did Hard Reset a multiple times, tried to unplug USB cable, battery back and forth, but it was of no help.
I found this question on various forums but unfortunately, no one came up with a positive solution except replacing it under warranty. I came back to Pakistan and phone is it out of warranty so there is no possibility for that.
Yesterday, I performed STOCK ROM flash. Luckily I managed to put it WP 7 and so far it is working fine. Later I updated it through ZUNE and during a hour download/installation, I expected it to install WP 7.5 but it popped up the same logo again. I tried everything but problem remains the same. Im stuck on 8th step out of 9 i.e. restarting your phone. I flashed back again to 7, then tried again, but same logo appears back and blinks
It clearly seems like wp 7.5 has some software issues in the bootup. Is there any direct WP 7.5 ROM available on internet?
What else should I do to fix it?
MicroSD Card
Ramzoun said:
Hi,
My phone was working absolutely normal for about a year but suddenly yesterday morning I found it stuck on 'BLINKING SAMSUNG LOGO'. I left it on charge overnight. It was absolutely shocking and I did everything possible to wake it up but It didnt show up. I did Hard Reset a multiple times, tried to unplug USB cable, battery back and forth, but it was of no help.
I found this question on various forums but unfortunately, no one came up with a positive solution except replacing it under warranty. I came back to Pakistan and phone is it out of warranty so there is no possibility for that.
Yesterday, I performed STOCK ROM flash. Luckily I managed to put it WP 7 and so far it is working fine. Later I updated it through ZUNE and during a hour download/installation, I expected it to install WP 7.5 but it popped up the same logo again. I tried everything but problem remains the same. Im stuck on 8th step out of 9 i.e. restarting your phone. I flashed back again to 7, then tried again, but same logo appears back and blinks
It clearly seems like wp 7.5 has some software issues in the bootup. Is there any direct WP 7.5 ROM available on internet?
What else should I do to fix it?
Click to expand...
Click to collapse
Hi, if you have a microsd card installed it may be the problem, remove the card, do a hardreset, then reflash your handset and try to upgrade to Mango then see what happens, if all is good then your microsd is faulty, this happened to a lot of focus users ))
Doesnt load wp.7.5 mango
VSparxx said:
Hi, if you have a microsd card installed it may be the problem, remove the card, do a hardreset, then reflash your handset and try to upgrade to Mango then see what happens, if all is good then your microsd is faulty, this happened to a lot of focus users ))
Click to expand...
Click to collapse
I actually removed my SD card since beginning installation. Any other possibility?
7.8 ROM
Should I try to update a 7.8 ROM over this 7.0.7004 OS Version??
You can tray
Ramzoun said:
Should I try to update a 7.8 ROM over this 7.0.7004 OS Version??
Click to expand...
Click to collapse
You will ned to install a custom bootloader for installing a custom ROM, but if you handset is under warranty I would fully recommend taking it to the service as I doubt your problem will magically disappear with a custom ROM, and there is a big chance of bricking the device when installing a custom bootloader if your device is problematic.
Please somebody help!
I have updated it twice but the problem pops up same in the end. It keeps on blinking the logo.
My current version is 7.0.7008. everytime I connect it to zune, it updates on request to 7.5 add on but Im stuck.
Please somebody help me, I have bought a used phone and out of warranty. What can I do to restore it back to WP 7.5.?
Ramzoun said:
I have updated it twice but the problem pops up same in the end. It keeps on blinking the logo.
My current version is 7.0.7008. everytime I connect it to zune, it updates on request to 7.5 add on but Im stuck.
Please somebody help me, I have bought a used phone and out of warranty. What can I do to restore it back to WP 7.5.?
Click to expand...
Click to collapse
What logo does it blink ? The Samsung one or the pc connection ?
OP, Sir next time title your thread Thanks, I did it for you...