[Q] Aurora ICS wifi not working - Huawei Ideos X5 U8800

I have an x5 bought from greece. I had installed the oxygen from here with android ver 2.3.7 and everything worked perfectly.
Yesterday I followed the instructions (restored in my 2.2.1 version, upgraded to 2.3.5, rooted and upgraded to 4.0.3 Aurora 1.9). The device seems to handle the ICS.
All was well but it could not find my wifi connection (which is available using Connectify!).
The wifi switch goes to on, but no wifi connections appear in the list.
Any suggestions?
Thanks in advance!

Try this

My IMEI code is not 0 but still the WIFI is not able to find any networks, also I am having problems with 3g. My provider gave me the correct apn settings but nothing. Is anyone else having problems with the 3g connection?

Check if you have mac address.

The mac address was fine.
I say was because I messed it up everything trying to load a backup, so now I am trying to save the device and load the stock 2.2.1 rom so that I can start from scratch!

I am having the same issue you have, I had TMN original Froyo 2.2.1 than updated to original 2.3.5, and after that rooted and after 3 step wipe I installed aurora.
No wifi, have mac and imei, and did 3rd wipe again followed by reinstall of Aurora, no go.
Even nstalled latest kernel with new wifi drivers, even worse

i have a non blank IMEI but i dont have a Wi-Fi MAC address...is this why i cant get Wi-Fi?

Crystuhls said:
i have a non blank IMEI but i dont have a Wi-Fi MAC address...is this why i cant get Wi-Fi?
Click to expand...
Click to collapse
Yes

Qqqxxxzzz said:
Yes
Click to expand...
Click to collapse
is there anyway to fix this? im running 2.05 aurora

Crystuhls said:
is there anyway to fix this? im running 2.05 aurora
Click to expand...
Click to collapse
Loureiro said:
Override MAC Address:
-Install Terminal Emulator from Market.(with data or via PC)
-Run terminal and enter these commands: (where is "11:22:33:44:55:66" you should place your original mac address)
su
setprop persist.sys.wifimac mac_param=11:22:33:44:55:66
Click to expand...
Click to collapse
Sent from my u8800-aurora-ICS using tapa 2-5

Qqqxxxzzz said:
Sent from my u8800-aurora-ICS using tapa 2-5
Click to expand...
Click to collapse
it says "where: not found"
then after i type in su
and the rest then it is just blank

Crystuhls said:
it says "where: not found"
then after i type in su
and the rest then it is just blank
Click to expand...
Click to collapse
Original thread:
http://forum.xda-developers.com/showthread.php?p=24394336
Post 2
Sent from my u8800-Aurora-ICS using tapa 2-6

Related

CM10 + 3G connection

Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
skulljoi said:
Anyone has problem with 3g and CM10?
like its working, but after a long time, 3g icon still on bar but not efectuve working, browser cant research for a conection
after a disable data conection and reenable it everything start work again.
Click to expand...
Click to collapse
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
Worked for me (2)
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
i has enabled data romaing but national data roaming off, will try with this option enabled now, tks
did you know how the CM10 work with auto enable/disable sync and 3g connection?
on preview version i has an option, turn of sync and 3g after a X mim with no incomming news or something like that
Caesarivs said:
Enable Data roaming and national data roaming on Settings -> Wireless & Networks -> More... -> Mobile networks
Worked for me
Click to expand...
Click to collapse
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
skulljoi said:
I try check the 2 options, but something happend, after i wake up, the icon of internet still there, but no connection, after stop and start data conection, icon get out and get in and then everything start work normal
so you have other sugestion?
Click to expand...
Click to collapse
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
eduwp90 said:
Same problem here. I had no problems with 2.3.6 uk official. On CM9 and CM10 I have thuis issue.
Will try to do a clean install, (flash uk 2.3.6, then CM10) because my problems started with CM9.
Do you had this problem in CM9 too?
Click to expand...
Click to collapse
i was on 2.3.6 BR and the update to CM10, and the problem began
i am getting other issues like, cant merge PROFILE with my google account and some slowly process
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
Thanks alot for your hard job, this ROM is AMAZING!
I have signal drop after install this ROM (using version 2012/7/21).
To solve my problem, I copied the File_GSM and File_Seem_Flex_Tables files from my stock ROM (Retail Brazil) and replace the CM9 files.
I put the files in /system/etc/motorola/bp_nvm_default and reboot, and now I have strong signal and no more drop calls.
The ROM CM9 to Motorola Bravo CrystalTalk function is supported. I tried to copy the file Phone.apk this ROM for the Milestone 2 and the option to configure the CrystalTalk appears in the phone settings, but after a reboot the settings are lost.
ATTACHED FILES
bp_nvm_default.zip - [Click for QR Code] (1.2 KB, 29 views)
Click to expand...
Click to collapse
I've tried this procedure in CM10 and it works!!
cruizgaray said:
Have you tried this solution http://forum.xda-developers.com/showthread.php?t=1623385&page=71
I've tried this procedure in CM10 and it works!!
Click to expand...
Click to collapse
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
mike_oldfield said:
Maybe you can try MotoAndroidDepacker
Use SBF that gives you - a good data conection
extract radio files recompile to SBF and - flash it
How To http://forum.xda-developers.com/showthread.php?t=1459470
Click to expand...
Click to collapse
Ok I will try this. I've extracted the files from a gb nandroid backup so I think that this is almost the same but I will give it a try.
I've also used the baseband switching app with no luck.
Anyone knows witch files manage the 3g on our phones¿ I replaced the ones that are listed in the above posts but are there others?
Thank you mates
Sent from my A953 using xda app-developers app
Hi,
I got the same problem for Wifi and in minor way for 3G with mine (my baseband is EPU93_U_00.60.00).
I deactivated the national roaming but reactivated it now for testing ...
For the Wifi I tried to disable 802.11n in the tiwlan.ini file but seems to not work.
I'll try to do the requested log readings from tezet when I would have time.
A message for lotan_rm, you're not the alone one (also need to reach 10 post for posting in dev )
eduwp90 said:
Sorry but I tried this and the problems still there. I used the files attached and the files from a gb backup. I reflashed uk gb and then cm10. Everything works great but after an idle period the mobile data connection doesn't work. Any ideas¿¿
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
lucasdeeiroz said:
maybe you should change the files permissions. try -rw-r--r-- on both files and reboot.
Click to expand...
Click to collapse
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
what country you are?
which SBF (stock froyo) that gives you a good data conection? (full name)
eduwp90 said:
the files already have that propieties but thanks by the way.
I've also compiled a sbf with motoandroid depacker containing only the baseband files and the problem still there.
This problem is driving me crazy. Any ideas??
Click to expand...
Click to collapse
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
lucasdeeiroz said:
So you didn't replaced the original files. The attached files are with differents permissions. Use root explorer to replace the files and it will be with wrong permissions. Then, you change the permissions and reboot. At least here the permissions were wrong...
Click to expand...
Click to collapse
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
eduwp90 said:
I'm from spain. The sbf that worked well for me was the uk gingerbread (MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTDACH_P013_A007_HWp2a_Service1FF.sbf).
I didn't replace that files because these are for brasil baseband. I replaced those files with ones on my backup that worked well. The problem persists.
So then I created a sbf using motoandroid depacker that only containts the cg45.smg (baseband files). Flashed it. Problem persists.
Checked the files permissions they are ok.
Used baseband changing app. Sadly, problem persisits.
I tried also a clean install. (flash uk gb, then install cm10 doing all the wipes etc...)
I will try to use brazil files and check the permissions..... thak you everybody
Click to expand...
Click to collapse
So you have a big problem... Anyway, the files only let the mobile data working for more time, but don't "forever"... Now this problem appears after some hours.
So this problem is not solved at all?
Sent from my A953 using xda app-developers app
eduwp90 said:
So this problem is not solved at all?
Click to expand...
Click to collapse
Before overwriting files my connection was break after few minutes
After overwriting files data connection was extended to few hours
I could not get a continuous data conection in custom ROM

Wifi problem

Hi there,
I've been having problems with my wifi at my home conection. I can connect to the network, but the amount of data transeferd between the phone and the router is close to nothing. It doesn't even connect to google services... Somebody knows anything about this?
alrubenalves said:
Hi there,
I've been having problems with my wifi at my home conection.
Click to expand...
Click to collapse
only at your home this happens?
have you installed the aurora updates?
Yes, only at home, and I have the Aurora update 18.
Did you try using wpa_alt in /system folder? (or /system /bin i'm not sure tho')
Sent from my U8800
entrapmen said:
Did you try using wpa_alt in /system folder? (or /system /bin i'm not sure tho')
Sent from my U8800
Click to expand...
Click to collapse
I didn't undertstand that... I found a wpa_supplicant_alt at /system/bin, though.
alrubenalves said:
I didn't undertstand that... I found a wpa_supplicant_alt at /system/bin, though.
Click to expand...
Click to collapse
Rename wpa_supplicant to something else and than rename the _alt version to wpa_supplicant reboot your device and try wifi again.
Sent from my U8800
entrapmen said:
Rename wpa_supplicant to something else and than rename the _alt version to wpa_supplicant reboot your device and try wifi again.
Sent from my U8800
Click to expand...
Click to collapse
I did that, and nothing changed...It still connects, but I can't access de market or any other site on the browser. Sometimes, when I turn Wi-Fi on, the phone reboots, I don't know if it has something to do with this or not...
Last thought, try changing your modems encryption and radio channel. If those doesn't work i'm out of ideas. Goodluck
Sent from my U8800
entrapmen said:
Last thought, try changing your modems encryption and radio channel. If those doesn't work i'm out of ideas. Goodluck
Sent from my U8800
Click to expand...
Click to collapse
Tried both of them, none worked... I already did a factory reset, I have the latest Aurora update, checked the router DHCP log (wich shows that the android device is connected), and I still can't access internet. I already tried another android phone in my home network (Xperia U, which worked), and tried my phone in another wi-fi connection, and it also works.... This is so weird!
No one?

[Q] Huawei U8800-51 wifi problem

hello guys, after following every single step to update my phone to aurora Dzo's v5 U20 the wifi on my phone will not work, its grayed, i did all the wipes requiered, everything in the Rom seems OK but wifi isnt. i think the problema is the MAC cuz it says MAC address unavailable...
i did the WPA_suplicant rename thing, but that didint work. can u guys plz let me know what i need to do to fix this ?
thx guys.
jesucito21 said:
hello guys, after following every single step to update my phone to aurora Dzo's v5 U20 the wifi on my phone will not work, its grayed, i did all the wipes requiered, everything in the Rom seems OK but wifi isnt. i think the problema is the MAC cuz it says MAC address unavailable...
i did the WPA_suplicant rename thing, but that didint work. can u guys plz let me know what i need to do to fix this ?
thx guys.
Click to expand...
Click to collapse
I am facing a similar problem. I have lost my IMEI also during flashing my phone to custom roms. Check your IMEI is it showing 0?
MuradHemani said:
I am facing a similar problem. I have lost my IMEI also during flashing my phone to custom roms. Check your IMEI is it showing 0?
Click to expand...
Click to collapse
nop, my IMEI is there, but the mac isnt... mac:unavailable
im too i dont have something wrong on my imei and mac addr.. anyone can solve this ???
Try this
Backup your IMEI if it is not null
1. Your phone should be rooted
2. Download and install 5iromtoolbox
3. Open 5iromtoolbox app you installed and look for "backup imei"
App backup your phone's imei.And after that, when your imei nulled, root your phone if it isn't, install that app again and look for "restore imei"
And don't delete any folder named "5irom" or similar.It contains 3 img files.They are important.
Get back to a official GB and check your mac adress, if it's null get back to android 2.2 and take note of your mac adress
Root your phone
install the rom you wan't
check your imei, if it is null install 5iromtoolbox app again and look for "restore imei"
Override MAC Address:
-Install Terminal Emulator from Market.(with data or via PC)
-Run terminal and enter these commands: (where is "11:22:33:44:55:66" you should place your original mac address)
su
setprop persist.sys.wifimac mac_param=11:22:33:44:55:66
Hope it helps
Sorry for my bad english
doesnt work and now.. my wifi cant connect to router. i do flashing.. but wont work stil disconnect. maybe a driver or something else???
reaaly need help

[Q] Wifi problem on showing psk passwords on rooted phone

Í have rooted Note3 Jelly Bean.
Wifi works fine. But i cannot see the passwords of my own wifi networks.
I have tried several methods:
Going to /data/misc/wifi and checking wpa_supplicant.conf,
And also apps like "wifi key recovery" or "Wifi QR share"
The problem is it shows a diferent psk password. Its like a long line of numbers a letter, like if it was in another code.
¿How can I translate that so it shows the real password?
e2luispa said:
Í have rooted Note3 Jelly Bean.
Wifi works fine. But i cannot see the passwords of my own wifi networks.
I have tried several methods:
Going to /data/misc/wifi and checking wpa_supplicant.conf,
And also apps like "wifi key recovery" or "Wifi QR share"
The problem is it shows a diferent psk password. Its like a long line of numbers a letter, like if it was in another code.
¿How can I translate that so it shows the real password?
Click to expand...
Click to collapse
Just grab one of the Apps of the play store. Since you're rooted they'll work fine.
radicalisto said:
Just grab one of the Apps of the play store. Since you're rooted they'll work fine.
Click to expand...
Click to collapse
Thanks but as I have said.. I have tried several apps already and all of them give me the same output.. not a valid psk password
I've got the same issue :/
ajolly said:
I've got the same issue :/
Click to expand...
Click to collapse
I cant beleive we are the only ones with this problem.
Anyone?
One more time.. still having the problem...
e2luispa said:
One more time.. still having the problem...
Click to expand...
Click to collapse
I have the same problem ...
Any Solution?
I have the Problem but on my S5 withz root :crying:
LenaTom said:
I have the same problem ...
Any Solution?
Click to expand...
Click to collapse
Its something with the Kernel, i switched to a custom Kernel and the Problem is gone, the switching deleted all saved WiFi keys but now i'm able to See them
Sent from my SM-N9005 using XDA Free mobile app
Egorych said:
Its something with the Kernel, i switched to a custom Kernel and the Problem is gone, the switching deleted all saved WiFi keys but now i'm able to See them
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the answer! How can I switch the kernel? Can you tell me where I can find more information about this?
I have the same problem with my note 3 Android 4.4.2.
I would be lucky if there exists a solution!
how to fix the wifi passwords recovery
well, I tried every new original rom for my sm n9005, I tried everything with the wpa_supplicant.conf file, even I copied a good one from other phone and I couldn't fix the problem. When I changed the kernel then the problem was fixed! I think it's the only way to fix the wifi passwords recovery!
ahodoudis said:
well, I tried every new original rom for my sm n9005, I tried everything with the wpa_supplicant.conf file, even I copied a good one from other phone and I couldn't fix the problem. When I changed the kernel then the problem was fixed! I think it's the only way to fix the wifi passwords recovery!
Click to expand...
Click to collapse
Which kernel did you take?
ultimate kernel
The "Ultimate kernel".
http://forum.xda-developers.com/galaxy-note-3#kernels.
Found a fix
I'm with a GS5, but it should be had the same issue. I opened build.prop file and changed the line ro.securestorage=true to false and now not only do I have Xposed and S Health working simultaniously, but I also fixed the WiFi Key Recovery problem
Remember to reboot after changing build.prop
Thanks so much for this answer!!!!!
I have a Galxy Note 3, Android 4.3
In this case the file was named ro.securestorage.support=true and I changed it to ro.securestorage.support=false.
Now the WiFi Key Recovery problem is fixed with all new passwords that you write ...
wifi password recovery from kitkat 4.4.4
Thanks. Worked for me. I am using note 4
Doubt
LenaTom said:
Thanks so much for this answer!!!!!
I have a Galxy Note 3, Android 4.3
In this case the file was named ro.securestorage.support=true and I changed it to ro.securestorage.support=false.
Now the WiFi Key Recovery problem is fixed with all new passwords that you write ...
Click to expand...
Click to collapse
which means the saved passwords will disappear and we have to enter the passwords again to connect ....
shockhawk said:
which means the saved passwords will disappear and we have to enter the passwords again to connect ....
Click to expand...
Click to collapse
Yes, that's right.
I have the secured password "1a1078c14e7b77c7eccd9d1e018bdb" , is there any way to convert it into the normal text password???
Please help if anyone has the solution .

Kodi????

any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
dillfever said:
any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
Click to expand...
Click to collapse
The fault you described is normally caused by the wrong address entered.
dillfever said:
any help here would be great......upgraded to 3.0 everything is running good, installed twrp, rooted, the only issue that's driving me mad is that I installed kodi 16(latest) and when trying to add file source like fusion I get unable to connect couldn't retrieve directory information, this could be due to the network not being connected?????? wtf network is connected...back to nvidia to check where kodi is with it's data....
Click to expand...
Click to collapse
Yes works fine here, check address, also try it on pc first to make sure it works.
was working fine on 5.1, retype at least 6 times same error, not just fusion url but any that I try....
dillfever said:
was working fine on 5.1, retype at least 6 times same error, not just fusion url but any that I try....
Click to expand...
Click to collapse
ok all is good, had to hook up to line not wifi and no problems at all, except why it wouldn't work on wifi???? oh well loaded what I wanted.....dill
gffmac said:
Yes works fine here, check address, also try it on pc first to make sure it works.
Click to expand...
Click to collapse
I think you need to connect to LAN first and then unplug and wifi should be working. I had similar issue with wifi after installing a fresh custom ROM.
dillfever said:
ok all is good, had to hook up to line not wifi and no problems at all, except why it wouldn't work on wifi???? oh well loaded what I wanted.....dill
Click to expand...
Click to collapse

Categories

Resources