Database Users

[Q] help me guys (restarting loop)

hey guys i have a HTC HD2 i already added the new radio
an installed magdlr ( i think thats the name) so far, i havnt had any luck flashin any roms...they flash, but never boot
i have this one flashed atm moment HyperDroidGBX-v12
but as i just started i cant post in that thread
sorry, i used the search bar, so dont eat me alive plz
i get to the blue android, but it just hangs, reboots, an does it again
help me out, what am i doin wrong
I have installed everything but when my phone boots into android, after about a minute it will just restart itself and continue the same over and over without ever fully going into android
^ kinda like this
but im usin a regualr battery

Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2

Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium

rauschkugl said:
Did you qlso install clockworkmod with the correct partition size? If your partition is to small for the rom image boot loops are caused.
Sent from my HTC HD2
Click to expand...
Click to collapse
yea i installed it, but im not sure if i did the partion size thingy?
maybe, but just in case i didnt, how do i do that step by step?
also do i have to fromat my sd card for this to work, its already fat 32
whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
ill try that after soem one explain the pastion thing to me
although i think i did,i went to clockwork an set it to 1024

whynot66 said:
Assuming you have the right partition size go to clockwork cleardata/factoryreset then clear cache the go to advanced and clear dalvic rhen reboot
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
i set it to 1024,an 0 for the swap
an did everything in your post
still restarting, gettin worried
what do i now?

bumping
in the hopes of being helped just teeny bit quicker

you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)

mutil said:
you have partitioned your sd,not nand. i think your rom needs 5-150-5 nand partition. unrar attached file.connect phone to pc.in mgldr go to usb flasher- see usb flasher.....usb-right click on daf-run as administrator-after it finishes flash your rom using mgldr-ad recovery-install zip from sd-choose zip from sd-choose your rom.zip.after it finishes reboot.
(save this recovery folder in pc.when you need a different size of nand partition open flash.cfg with notepad and arrange it according to your needs.)
Click to expand...
Click to collapse
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!

SubZeroMaster said:
thanks ive being beating the %^$# outta the f5 BUTTON all day
i did what u said
btu i dont comepletely understand how this works? care to explain
the instructions i used never said anything about partioning nand
what does that mean, an do
also i checked the thread for the build an didnt see any info regarding this
an do i have to do this everytime i change a build
i need all the info i can get
ALSO, it fails saying something in red like
nand boot failed (or very close)
HALP HALP!
Click to expand...
Click to collapse
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.

mutil said:
it s normal that nand boot fails, because you didnt flash your rom.zip from sd yet. nand partitioning arranges your phone's internal memory according to the need s of roms. if you use a rom with same nand partition size (e.g. miui roms or cm7 roms but not sense roms) you will not apply partition again, just wipe data/factory reset in ad recovery menu and flash the rom.
Click to expand...
Click to collapse
i used the program...fine
i wiped..fine
i flashed rom...fine
restarted fine...
didnt boot in to android???
whats goin on?
also thanks for the help so far, but dont abadon me yet plz

How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)

Marvlesz said:
How about a fresh install?
That guy had bootloops, maybe the same error? anyway, Follow this post by me ,, it is a full & complete step by step on how to install the ROM you wanted (HyperGBX).
Most importantly, Swap Step 8 with your MAGLDR ROM from pongster's thread (HyperGBX)
Click to expand...
Click to collapse
followed this to the TEETH
an loopin......
ARRGGH plz guys dont forsake me just yet
also thx for every

bumptastic

142 people have viewed this thread
but only 4 or so people helped!
come on guys!!

i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?

Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.

SubZeroMaster said:
i beatin the hell outta F5, come guys .....the longer i wait, im foneless
is there something im missing?
whats an how to nand pasrtion
^ the same for sd partionin
i stumped
NAND Partition 250MB - SD-EXT4 2GB what do these mean, an do i need em?
Click to expand...
Click to collapse
man which rom you want to use? you had said hyperdoid and now you talk about 250mb nand which has nothing to do with hyperdroid!?

Marvlesz said:
Where did you find these information? where did you find NAND partition 250 .... etc ?
Maybe you have bad blocks (which I hope not, because data cannot be written on them, resulting in some missing system files, thus giving you bootloops).
Check this thread : http://forum.xda-developers.com/showthread.php?t=1189544 and follow the instructions, then attach the log file.
Click to expand...
Click to collapse
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
an thanks for everyone helpin get this far

SubZeroMaster said:
wouldlove to BUT
now windows is tellin me it can format my sd card
ive tried over an over
its stopin me from progressin
how do i get pass this
Click to expand...
Click to collapse
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?

Marvlesz said:
what does this mean? who said anything about sd card?
you're talking about the log file? why? is your sd card not working?
where did you read "250mb NAND Partition" ?
Click to expand...
Click to collapse
saw it in in some guys signature (250 nand ) although i dont knwo if that relates to me
no, i cant put the recorvery stuff on my sd becuase, windows is saying i have to format first (then is says it cant)
is was fine yesterday, maybe all this "stuff" i may/may not have done something
anyway how i can fromat so i can proceed?

[Q] Wont Boot into Andriod

My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out

Renegade99 said:
My HD2 wont successively boot into android. I've tried many Different Roms sense and non sense, but still wont work. I either get get a (status 0) error in CWM or it says it installs but i reboot and choose to boot nand via MAGLDR and get the error "no boot sources" I'm I doing something wrong? I wipe my system before each install and portion it correctly. I had it booting Andriod Cm7 via Haret and Cdlar or what ever. I'm stuck Please Help out
Click to expand...
Click to collapse
What are your partition sizes? Particularily sense roms require a large partition. If your partition isn't large enough for the system, it will not boot.
Edit: Sorry I just reread where you said you partition is correctly.
Make sure your downloading the correct rom ?? Sorry I'm not much help on this.

Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR

Did u tried cLK ? Did u did full install proces ?

Cjovecje! said:
Did u tried cLK ? Did u did full install proces ?
Click to expand...
Click to collapse
I dont have that installed? isnt that just Clockwork mod

every type of isntall has its steps. Did u followed exactly ?

Yeah...wipe, partition SD, install via zip CWM or at least that's what I do
Sent from my HTC HD2 using XDA App

Did u did task29 ?

Is this U´r first Try to flash Rom´s?

Renegade99 said:
Yeah, i partitioned it right 1024 and 0 swap, Sense roms give me a status 0 error and non sense give me that no boot sources error on MAGLDR
Click to expand...
Click to collapse
I think what he meant was is the system partition correct? Not SD-EXT.

Nigeldg said:
I think what he meant was is the system partition correct? Not SD-EXT.
Click to expand...
Click to collapse
Yea that's exactly what I meant if your system isn't partitioned correctly there will be boot problems every time. Search for "HD2 Toolkit" it makes it so much easier.
Task 29
Then install magldr or clk with the correct system partitions.*most important part*
Install clockwork mod
Flash your rom
Reboot and it should start fine.
Sent from my HD2 using xda premium

I have two HD2s this one is running off NAND Hard Droid 2. I did all the steps I did with this one. Flashed Hspl3 choose spl 2.08 after that was done flashed magldr then installed CWM via SD and portitioned the SD? Not sure about system. Swap 0 as it said in instructions. Flashed zip and I get the errors. Could someone tell how to task 29. Isn't that a nand wipe?
Sent from my HTC HD2 using XDA App

Needs that tool box thing xD
Sent from my HTC HD2 using XDA App

I'm on my phone so I can't give you the specific link. If you go to the guide in my signature I have a link to hd2 toolkit. You need this program. It will solve your problems because your system partitions are not correct. Swap and things like that matters but its on your SD card. Your problem is with the internal partitions.
Download the program I promise its worth it. If you don't like it delete it but at least try it so you can boot and experience android on nand.
If you want to use clk my guide might help you with that to.
Sent from my HD2 using xda premium

Task 29 deletes all data on your phone but not SD card.
Sent from my HD2 using xda premium

Alright I'll try it later when I'm on the computer
Sent from my HTC HD2 using XDA App

I don't know if I can ask my question in this topic, but I think partitioning is part of my issue. On my HD2, I installed Ice Cream Sandwich Beta7. Used Magdlr. At first it won't booit into android either, but that was because I used the recovery_1.3400MB. Later I used the 250MB.
But then I got problems with installing apps: Internal space was insufficient. So I read this topic:http://forum.xda-developers.com/showthread.php?p=20577589 See page 12.
So I followed these steps:
Backup your SD card data (and prefferably nandroid backup your rom) and use recovery to repartition your SD.
Go to recovery, advanced, Partition SD Card
Partitioning to 1024 works wel, but 2048 won't. I don't know why, cause it's a 2GB sd card. But after partitioning, Android isn't using the space on the sd-card.
I can manually copy apps to the SD card, but it still gives errors about insufficient internal memory......

2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App

Renegade99 said:
2gb=2000mb that's a problem if only using a 2gb for partitioning over 2gigs xD
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Actually 2GB = 2048 MB...
But still the question is; when I choose 1024, why doesn't android use this partition as extra storage?? So why am I getting errors of insufficient space?

Check your properties on the SD because they usually lie to you about how much storage it is. Its rarely plain out too gigs
Sent from my HTC HD2 using XDA App

Coredroid Rom

I need help I installed a bunch of ROMs in my hd2 coredroid some of the first several months too but whenever I try the phone hangs on the screen d load the ROM and so remains.
The last time I followed the instructions:
1. Create empty folder on desktop. And drag and drop files from SDCARD TO ALL NEW FOLDER.
2. Delete ALL partitions on SD Card.
3. Task 29
4. install MagLDR
5. install Recovery
6. Recreate Partition with 4EXT. Again go to Tigers Tut. His explanation is the best for Letting 4EXT SDCard partition.
7. Flash and Enjoy
But nothing still the same, only missing two post me to ask in the forum itself coredroid.
I would appreciate help.

I have written a guide in this if you're interested.
Sent from my HD2 using xda premium

Thanks for the reply, but I think I followed all the steps correctly and at the end when you load the rom, I have to remove the battery because it is hung on the loading screen "Get you connect Coredroid"

Anyone with any alternative solution?

Sounds like you used the wrong partition sizes.
Sent from my HD2 using xda premium

If it just hangs i would say wrong partition size as well. i actually posted on there,
cause it did the same for me using the 180 mb partition size on a tmous model, but it failed to boot. but when i switched it to 370, it booted fine.
and if its on 180, u maybe have bad blocks, and require a bigger partition layout, so i would start with 200 and up and try again.
good luck.

[Help] Flashing zip files off sdcard

EDIT: Ok, I've located where my problem is. Basically what happens is when I install the Custom ROM it replaces my 2ndInit bootmenu and CWM and it 'upgrades' them. But because it has 'upgraded' them I can no longer mount sd card. I have to reinstall 2ndInit to 'downgrade' CWM and then I can flash again.
Hi there,
A few weeks back I flashed Paranoid Android onto my phone (latest release), however now I have discovered that in recovery mode, my phone can't read or mount the sdcard, i.e. I can't apply updates.
Code:
If I select 'Install zip from sdcard > Choose zip from sdcard' I get:
E:Can't mount /sdcard/
And if I try 'Mounts and storage > mount /sdcard' I get:
Error mounting /sdcard!
I would really appreciate any help on this issue.
Note it was working previously (which is how I installed the ParanoidAndroid ROM) but now my phone can't read the sdcard in recovery. IT CAN READ IT ONCE THE PHONE HAS BOOTED UP.

Try running a chkdsk scan from a Windows machine to check if there's corruption in the filesystem
Sent from my MB526 using xda premium

thekguy said:
Try running a chkdsk scan from a Windows machine to check if there's corruption in the filesystem
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
will do and will post the results, but before I do, would that show anything because the sdcard works fine once the phone has booted up?

Not sure myself, it just eliminates any filesystem corruption as the cause. Also try using another build like quarx to check for this problem
Sent from my MB526 using xda premium

thekguy said:
Not sure myself, it just eliminates any filesystem corruption as the cause. Also try using another build like quarx to check for this problem
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
But I can't flash using recovery, so how would I test Quarx's build? Haven't had time to boot up my windows partition, but I will eventually.
EDIT: Ran fsck on fedora partition (forgot about the command). It came up with this
Code:
fsck from util-linux 2.21.2
e2fsck 1.42.3 (14-May-2012)
fsck.ext2: Is a directory while trying to open /media/CDF2-6BE2
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
I've backed up my SDCard and am going to run e2fsck command (will post results) otherwise I'm going to have to reformat it
EDIT 2: Came up with same error. Should I reformat it? As ext3/ext4? What should I do?

My memory card was standard fat32
And I'm no Linux expert but I think you're trying to check for a wrong filesystem, what is your current sdcard format(filesystem)
And I think you should reformat as fat32
Sent from my MB526 using xda premium

thekguy said:
My memory card was standard fat32
And I'm no Linux expert but I think you're trying to check for a wrong filesystem, what is your current sdcard format(filesystem)
And I think you should reformat as fat32
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Code:
/dev/sdb vfat 7856128 1361952 6494176 18% /media/CDF2-6BE2
Now I've checked fsck again
Code:
fsck.vfat /media/CDF2-6BE2/
dosfsck 3.0.12, 29 Oct 2011, FAT32, LFN
Read 512 bytes at 0:Is a directory

Can you try with Windows? And format to fat32
Sent from my MB526 using xda premium

thekguy said:
Can you try with Windows? And format to fat32
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
will do
EDIT:
Code:
The type of the file system is RAW.
CHKDSK is not available for RAW drives.
OK, Am backing up now. Will reformat as fat32

Ok... So now I've formatted as fat32, tried again, flashed full sbf, re-rooted phone, installed 2nd-init, flashed Quarx's latest build (before wi-fi experimentation builds) and still I have the problem

Sorry for the triple post
I've located where my problem is. Basically what happens is when I install the Custom ROM it replaces my 2ndInit bootmenu and CWM and it 'upgrades' them. But because it has 'upgraded' them I can no longer mount sd card. I have to reinstall 2ndInit to 'downgrade' CWM and then I can flash again.
Any suggestions on how I might be able to fix this?

Probably there isn't any fix, but you could make zip containing the working recovery, and flash it after every rom flash
Sent from my MB526 using xda premium

thekguy said:
Probably there isn't any fix, but you could make zip containing the working recovery, and flash it after every rom flash
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
If you could show me how to do that, I would so extremely grateful
Aparently there was a similar problem with the Defy running the 'official' CM and the wiki documented a fix here: http://oldwiki.cyanogenmod.org/wiki/Motorola_Defy:_FAQ#SD_Card
Do you think that could possibly work for the Defy+?
EDIT: However if I make a .zip file, would that put my phone in bootloop though? Because whenever I reinstall 2ndInit (v2.3) and it 'downgrades' my CWM/Bootmenu it causes a bootloop where I have to reflash everything. If I make a .zip that I flash after each install would it cause the same problem because it's 'downgrading' from the Bootmenu/CWM of the JB CM10 ROM.

I would've made you one, but unfortunately my computer is not working. I think it should be enough if the boot menu folder is replaced by your working set by a flash after every install
Sent from my MB526 using xda premium

thekguy said:
I would've made you one, but unfortunately my computer is not working. I think it should be enough if the boot menu folder is replaced by your working set by a flash after every install
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I really appreciate your help! I guess you could perhaps guide me in doing it, or I could wait till you've got a wroking computer.

So, computer just started working, and I made you a zip
Download the zip to your computer and extract the contents[META-INF and system) folders. Add your working bootmenu files inside the system/bootmenu folder you just extracted and delete the pre-existing text file there. Then add both META-INF and system to a zip(not rar!) and try flashing it. Make sure that the file consists of META-INF and system folders within itself. It should work
IF THERE'S A SIGNATURE VERIFICATION ERROR JUST TOGGLE SIGNATURE VERIFICATION WHICH IS PRESENT JUST BEFORE SELECTING THE ZIP FILE TO FLASH VIA RECOVERY

thekguy said:
So, computer just started working, and I made you a zip
Download the zip to your computer and extract the contents[META-INF and system) folders. Add your working bootmenu files inside the system/bootmenu folder you just extracted and delete the pre-existing text file there. Then add both META-INF and system to a zip(not rar!) and try flashing it. Make sure that the file consists of META-INF and system folders within itself. It should work
IF THERE'S A SIGNATURE VERIFICATION ERROR JUST TOGGLE SIGNATURE VERIFICATION WHICH IS PRESENT JUST BEFORE SELECTING THE ZIP FILE TO FLASH VIA RECOVERY
Click to expand...
Click to collapse
Thank you very much, I'll definitely try this out!
EDIT1: First attempt, didn't work
Trying something again...
EDIT2: Second attempt.... Put phone into bootloop :\
EDIT3: Third attempt... Seems like a bootloop again
So basically it changes the Recovery version (not the bootmenu) and puts it into bootloop :\ however I can flash via recovery.

Try copying only recovery folder from inside boot menu
I'll try to make a zip which first deletes the folder to avoid incompatibilities.
BTW can you enter the boot menu when there's boot loop?
And also try fixing permissions
Sent from my MB526 using xda premium

thekguy said:
Try copying only recovery folder from inside boot menu
I'll try to make a zip which first deletes the folder to avoid incompatibilities.
BTW can you enter the boot menu when there's boot loop?
And also try fixing permissions
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Yeah I can enter bootmenu during bootloop before it starts. I'll retry with the recovery folder only.
EDIT: Wow it worked! Thank you so much I hope you don't mind too much, but if you can modify the recovery slightly that it'd help out a lot and make everything perfect. But I can't thank you enough
I'll upload my working Patch.zip:
If you can do these, that would be amazing: (this is from the working CWM)
1) When I select 'Wipe data/factory reset' it says 'Formatting /data...' and then immediately says 'Formatting /cache...' and when the phone boots up, all my data is there. Now that isn't a problem as such but if I needed to do a clean install that may cause some issues.
2) This isn't a problem, but I was wondering if you could add a printed line whenever I execute the 'Wipe dalvik cache' because it wipes it very fast, but doesn't say anything in the console so I'm not sure if I clicked it or not. Nevertheless when I boot my phone up it says optimising apps which means that it worked.
But yeah only minor things.
Thank you so much

1)I can't modify the recovery, since I'm not really a dev but I can try to make you another zip to wipe data separately
2)Again, that is something coded in the recovery, which I don't know how to alter. Plus, my computer isn't working again(bad ram :banghead: ) so I'm limited to the phone
But are you able at all to wipe data from the custom recovery? Bootmenu? Are both not working?
Sent from my MB526 using xda premium

[Q] Flashing stopped at 'Formatting System...'

Hi, I've been flashing my HD2 for 1 hour and it stopped at 'Formatting System...' I don't know what's wrong. I did Task29, all kind of wipes and it stopped here.
Changelog:
-- Instal /sdcard/HD2_Android_2.3.5_Sense_3.5.zip
Finding update package...
Opening update package...
Installing update...
Formatting Boot...
Formatting System...
I'm trying this ROM by cLK & TWRP v2.2.2.0

Hey I just met you,
And this is crazy.
Could be the recovery.
So update it maybe?
Try a different recovery. Sometimes, I can't install certain ROMs until I change the recovery.

nozyk42 said:
Hi, I've been flashing my HD2 for 1 hour and it stopped at 'Formatting System...' I don't know what's wrong. I did Task29, all kind of wipes and it stopped here.
Changelog:
-- Instal /sdcard/HD2_Android_2.3.5_Sense_3.5.zip
Finding update package...
Opening update package...
Installing update...
Formatting Boot...
Formatting System...
I'm trying this ROM by cLK & TWRP v2.2.2.0
Click to expand...
Click to collapse
I would ask you to use CLK and make sure you have made a system partition on your SD card.

Rahil S said:
I would ask you to use CLK and make sure you have made a system partition on your SD card.
Click to expand...
Click to collapse
I assume you haven't read his post.
He clearly said
nozyk42 said:
...
I'm trying this ROM by cLK & TWRP v2.2.2.0
Click to expand...
Click to collapse
Besides, even if he were using MAGLDR AND didn't have an ext partition, that shouldn't prevent "system" from being wiped.

I made SD-EXT (ext4) partition 1024 mb, 0 mb swap (2 minutes before flashing ROM)
Then I tried flash my new ROM but it stopped on 'Formatting System...'
I used universal method to flash by cLK which I known but when I tried with cLK from link in thread with ROM, then worked.
But I think that SD partition didn't create because in the settings applications manager free space show only ~110mb
(in my previous ROM when I made the SD-EXT partition by method which I know the applications manager show ~1000 mb free).
cLK Install Manual:
Download archive with the cLK loader and Recovery from here than unpack its content.
Connect PDA in bootloader mode ("mattress") and run LeoAdvancedRUU.exe from сLK folder
Wait for PDA reboot and clamp a key "Back". Connect PDA with cable to PC
Install the driver if the PC doesn't see a PDA connected (download from here)
Run fastboot_resize.bat from cLK_CWM_Recovery folder
Wait for PDA reboot and get to the menu cLK. Run fastboot_install_recovery.bat from a folder cLK_CWM_Recovery. Wait the record ends.
Choose Recovery mode by arrows and press the call button "Green button"
Choose point "Install zip from sdcard" by arrows and next "Choose zip from sdcard", choose our archive with firmware (the firmware should be thrown preliminary on a sdcard) and press a call button "Green button"
After the installation finishes get to the menu again. Press a key "Back" and choose point "Reboot system now"
The PDA will reboot and the Android will be started. The first start a bit longer then usual
Click to expand...
Click to collapse

refresh

nozyk42 said:
refresh
Click to expand...
Click to collapse
Why are you refreshing? Didn't you say that your problem had been fixed?
nozyk42 said:
I made SD-EXT (ext4) partition 1024 mb, 0 mb swap (2 minutes before flashing ROM)
Then I tried flash my new ROM but it stopped on 'Formatting System...'
I used universal method to flash by cLK which I known but when I tried with cLK from link in thread with ROM, then worked.
But I think that SD partition didn't create because in the settings applications manager free space show only ~110mb
(in my previous ROM when I made the SD-EXT partition by method which I know the applications manager show ~1000 mb free).
Click to expand...
Click to collapse
Your problem was not being able to pass system formatting, now you are, or I am wrong?

Yes, but the most important was make a working EXT partition on my SD card, where the phone could automatically install new apps ;/
But I think that SD partition didn't create because in the settings applications manager free space show only ~110mb
Click to expand...
Click to collapse

nozyk42 said:
Yes, but the most important was make a working EXT partition on my SD card, where the phone could automatically install new apps ;/
Click to expand...
Click to collapse
Check the sdcard in a computer, see if the partition is there with correct settings.

In the computer I can see free space 6,3 gb (mircoSD 8 gb) so partition is probably well set ;/

nozyk42 said:
In the computer I can see free space 6,3 gb (mircoSD 8 gb) so partition is probably well set ;/
Click to expand...
Click to collapse
No, don't make assumptions. Use windows' desk management or any 3rd party app to CHECK.

Probably the rom is using ad2sd so it's mounting data from nand and putting apps on sd-ext partition (happens to me with energy sense 3.5 rom).

Use EXTRecovery to wipe all partitions, then create one, then print a partition table to check.

I will check this when I come back from work. Use phone like HTC HD2 or anyone smartphone is useless without sd partition.

In the cLK table looks like that:
In the 4EXT Recovery Control looks like that:

nozyk42 said:
In the cLK table looks like that:
..
In the 4EXT Recovery Control looks like that:
..
Click to expand...
Click to collapse
Have you tried a different recovery as I suggested?

Marvlesz said:
No, don't make assumptions. Use windows' desk management or any 3rd party app to CHECK.
Click to expand...
Click to collapse
I don't understand exactly what you mean

nozyk42 said:
I don't understand exactly what you mean
Click to expand...
Click to collapse
Forget about that. I was referring to the recovery. Try CWM for example and see if it works.

hmm, but why 4EXT Recovery Control shows sd-ext capacity 915 MB? I think that partition is well done, but my rom can't use it.

nozyk42 said:
hmm, but why 4EXT Recovery Control shows sd-ext capacity 915 MB? I think that partition is well done, but my rom can't use it.
Click to expand...
Click to collapse
tried another rom?