Related
ok i was playing with Ak-47 app on The dudes cupcake then next thing you know it says Blank sd card now I cant use any apps and under settings<SD card & storage it says total space and availalable space unavailable and unmount sd card. When I go to notifications bar where it says Blank SD card it suggest to re format sd card....What should I do? even when I mount onto pc under removable **** it suggest to reformat. What should I do? I dont wanna brick my phone. Also it wont let me see any files under removable disk.
duan19 said:
ok i was playing with Ak-47 app on The dudes cupcake then next thing you know it says Blank sd card now I cant use any apps and under settings<SD card & storage it says total space and availalable space unavailable and unmount sd card. When I go to notifications bar where it says Blank SD card it suggest to re format sd card....What should I do? even when I mount onto pc under removable **** it suggest to reformat. What should I do? I dont wanna brick my phone. Also it wont let me see any files under removable disk.
Click to expand...
Click to collapse
chances are u might have to start from fresh n format ..
http://www.sdcard.org/consumers/formatter/
?
What if I perform a wipe and Alt-s...will that work or will it brick my phone.
duan19 said:
What if I perform a wipe and Alt-s...will that work or will it brick my phone.
Click to expand...
Click to collapse
wiping doesnt do anything to your sd card
Refomat?
Well Could I just use the onscreen selection on my phone to reformat or will this cause problems.
duan19 said:
Well Could I just use the onscreen selection on my phone to reformat or will this cause problems.
Click to expand...
Click to collapse
that i dont know. i just use a card reader and format then depending on what build im using i wipe and start fresh
same thing happened to me last week on one of the dudes builds. My sd card was ruined. I tried to reformat it and then repartition it but it wouldnt let me repartition even though i deleted the old one. I messed with it for hours, before some one told me that it was ruined. all the transfering of info back and forth fried it i guess. I ended up buying a new one, this time class 6 (old one was class 2) I got it for 20 bucks (8gb) not to shabby of a price! sorry for your misfortune. Good luck
duan19 said:
ok i was playing with Ak-47 app on The dudes cupcake then next thing you know it says Blank sd card now I cant use any apps and under settings<SD card & storage it says total space and availalable space unavailable and unmount sd card. When I go to notifications bar where it says Blank SD card it suggest to re format sd card....What should I do? even when I mount onto pc under removable **** it suggest to reformat. What should I do? I dont wanna brick my phone. Also it wont let me see any files under removable disk.
Click to expand...
Click to collapse
The same thing happened to me about 4 days ago, however Im running cyangones 3.4 Rom not the dudes, tell me ....were you running any themes at the time like the hero theme or any other? Are you using apps to sd as in do you have your sd card partitioned ? Im trying to figure out why this happened to me also, as of right now it has happened twice in 4 days then, I wiped my phone, reformatted / repartitioned my sd card and am not using any custome theme with cyanogens 3.4 rom and it seems to be ok. I only have a few apps right now because I want to make sure it doesnt happen again before I load up my sd card again with apps.
i had no themes and i was using app2sd. but i wasnt using any apps at the time.. just thought i would ad my 2 cents
djwaz said:
The same thing happened to me about 4 days ago, however Im running cyangones 3.4 Rom not the dudes, tell me ....were you running any themes at the time like the hero theme or any other? Are you using apps to sd as in do you have your sd card partitioned ? Im trying to figure out why this happened to me also, as of right now it has happened twice in 4 days then, I wiped my phone, reformatted / repartitioned my sd card and am not using any custome theme with cyanogens 3.4 rom and it seems to be ok. I only have a few apps right now because I want to make sure it doesnt happen again before I load up my sd card again with apps.
Click to expand...
Click to collapse
thats how it started with my sd card..but when i reformatted i went to Jacman 1.62 build then thatts where my card just got fried...partition table got corupted
Yes maybe because its class 2 8 gigs
And yes to other gut I does has some hero in the dude 1.3r2.
Yes maybe because its class 2 8 gigs
And yes to other gut I does has some hero in the dude 1.3r2. bout to try to reformat I guess tell you what happens in a minute.
ok
I reformatted then put files back on G1(including the dudes cupcake 1.3r2(cant give up on the perfect mod lol)) then wiped and Alt-s....only diffrence this time is that i am gonna use appmanager and not put everything on class 2 8 gig so it will not burn out...and hopefully it want destroy my sd card.Thankx to everyone you guys were a big help.
very interesting topic....
same here:
I tried with 3 other sdcards, 2 of them are 100% ok, NO GO, doesnt work anymore. First I thought that my G1 reader has a problem, some time it works, some time not. Im on dudes 12b with apps2sd. The fact that no card works tells me:
- Phone error
or
- Software problem (really strange if this is the problem)
I wipe right now and will tell you if the card works again....
i had similar problem last week when switching from cyan 3.4 to dudes 1.3 i first tried just doing an alt - w and that gave me a lot of errors and force closes so i started over and reformatted/repartitioned my sd. Now my sd card doesnt read when i plug into pc but still works in phone. everytime i want to change/edit sd i have to pull sd out and use an adapter..it sucks cuz the lil sd latch is such a pain to open and close on the g1..
ok wipe didnt anything... really strange thing I can do nothing anymore, card is not readable (in pc it is readable, but not in my g1)....
Config:
Dudes 1.2b
No themes, no extras
APPS2SD, 500 MB EXT Partition
8 GB Class 6 Card
If anyone has a hint for me, any help is welcome.
could this have something to do with apps2sd... this is happening to me as well, and it only started when i switched from jac 1.4 to the dudes 1.3rc1 it works good for about 24 hours sans the bluetooth issue. then the next time i check the phone its all whacked out and says to reformat the card.
Found this, hope that helps, unfortunately I dont have an external reader here:
source: http://androidcommunity.com/forums/f7/unable-to-retain-formatting-on-sd-card-17338/index2.html
Turns out this is no more than an annoyance affecting the 1.5 JF builds. (not sure it's exclusive to those).
Anyway, long story short. The phone will always complain about the partitioning on the sd card and offer to "fix" the problem by re-formatting.
The key to the problem is to reboot the phone after the card has been re-partitioned. This will make the annoying pop-up dissapear and keep the partitioning table as defined.
Blank
Rerun apps to SD, uninstall reinstall all listed apps.
I had had this happen also. But I think most of it was my doing. I have a bad habit of not removing device safely after I copy files, I just use the eject button lol.. my p.c. even told me that I had removed usb device before the files were finshed bing prossed.. well whatever happend it didn't fry my card I just had to reformat it and. Run martins great skrip over agin and it was good to go.. I even went to buy a new usb cable just in case lol .. on hero/rosie running smooth ; )
So I originally asked this in Amon_RA's recovery thread, but was kindly asked to move it here. So here's my issue.
My G1 is not recognizing or creating any ext partitions using either the manual parted method or the automatic script include in Amons recovery. Using the manual method to make ext2 I get the following error:
Error: Input/output error during write on /dev/block/mmcblk0
Retry/Ignore/Cancel
Fat32 gets created fine.
I used fdisk on my laptop to create the partitions and it seems to take, but once I put the sd card back into my phone it disappears. Taking the card out of my phone and back in my laptop, the ext and swap partitions are gone. Anyone have any idea as to what the problem could be, or is my card just pretty much bricked?
SpiggidyBob said:
So I originally asked this in Amon_RA's recovery thread, but was kindly asked to move it here. So here's my issue.
My G1 is not recognizing or creating any ext partitions using either the manual parted method or the automatic script include in Amons recovery. Using the manual method to make ext2 I get the following error:
Error: Input/output error during write on /dev/block/mmcblk0
Retry/Ignore/Cancel
Fat32 gets created fine.
I used fdisk on my laptop to create the partitions and it seems to take, but once I put the sd card back into my phone it disappears. Taking the card out of my phone and back in my laptop, the ext and swap partitions are gone. Anyone have any idea as to what the problem could be, or is my card just pretty much bricked?
Click to expand...
Click to collapse
try paragon partition manager 9.0. see if that works for you. if not hit up newegg or meritline for a new card
Bad SD Card
b0ricuaguerrero said:
try paragon partition manager 9.0. see if that works for you. if not hit up newegg or meritline for a new card
Click to expand...
Click to collapse
I've been pulling my hair out for the last day trying to figure out why it would act like it partitioned fine, but then when I did a 'print' in parted it would only show one FAT32 partition. I had the EXACT problem the OP was having.
Half my day spent looking for some other resolution and then realized I had another SD card with me (just half the size) and tried it in the Recovery with that one with complete success. No errors or anything. I'm trying Paragon Partition Manager for my larger card, but not finding an option for the ext2 (or other UNIX) formats. It's the free 2010 version so I'm not sure if that makes a difference.
Bad SD Card - Paragon Killing USB Drivers?
vwyankee said:
I've been pulling my hair out for the last day trying to figure out why it would act like it partitioned fine, but then when I did a 'print' in parted it would only show one FAT32 partition. I had the EXACT problem the OP was having.
Half my day spent looking for some other resolution and then realized I had another SD card with me (just half the size) and tried it in the Recovery with that one with complete success. No errors or anything. I'm trying Paragon Partition Manager for my larger card, but not finding an option for the ext2 (or other UNIX) formats. It's the free 2010 version so I'm not sure if that makes a difference.
Click to expand...
Click to collapse
So, version 9.0 has the options for the needed Linux partitions. With that, it would appear I have a bum 8GB card. As stated, the 4GB works just fine - both Transcend Class 6 cards. On one PC it was having a difficult time in the formatting process after creating the partition and I had to kill the application via task manager in Windows. Then it got to where my USB port drivers couldn't start so I couldn't read via SD card adapter or USB cable to the phone with the card mounted. I'm in IT so I've dealt with drivers failing before, but I'm finding myself having to ask my friend Google now as even after uninstalling the drivers I have the same result. I'm afraid it might be due to the Paragon application. More on that below.
I installed Paragon on another laptop at home and it went through the process successfully (at least appeared to) with the 8GB card. Joy had returned to my frustrated being and I proceeded to use the restore image to upgrade from ext2 to ext3 - success! - Then it was wipe and flash. All seemed well in the world until I went into the settings after getting into the OS for the first time (again) to look at my secondary SD Card space and found it at "unknown." Looking at the card via Paragon Partition Manager once again it was showing as only two partitions instead of three with the ext3(2) being "unformatted." Just to be sure, I put in the 4GB card to verify in Paragon it's showing as expected (three partitions in correct formats).
Being the stubborn sod I am, I came to work determined to get the 8GB card working and installed Paragon on a test machine (I run a large testing lab) and redid the partitions. Removing and re-adding the partitions on the 8GB with "success" then simply unmounting and mounting the card to the PC revealed the card is definitely the major flaw all along. After mounting it came up as just the two partitions again - FAT32 and unformatted for the 2nd, even though it was only 10 seconds ago it showed successful creation of the three and formatting. Because I'm one to verify a verification I repeated my steps to see the same result. However, not only did I see this same result I now DIDN'T see the SDCard via Explorer, but could via Paragon. Inspection of Device Manager showed the exact same thing as on my home laptop that stopped being able to read the Android phone with card or adapter with card.
So, my last couple days of fighting and frustration were all because of the SD card of which I've never had a problem with it storing data for the last year with many times reformatting and re-applying data. Odd, to say the least. I am back up and running, but now I have USB drivers failing to start problem on two PC's! This is not a concern with the one at work since I'll just restage it, but I'm afraid it might take restaging my laptop for this to be fixed which as we all know is just not very convenient.
Anyhow, the lengthy explanation was more for those like me that were Googling/searching for a long time for a similar situation.
Cheers.
I have a similar problem. One of my SD cards of 1 GB has ext 2 and 3. But the main one of 2 GB can be partitioned only with ext 2. I am using Amon Recovery 1.5.2. When I press create ext 3 I get an error and not even from console it doesn't work, I get upgrade_fs not found.
adair said:
I have a similar problem. One of my SD cards of 1 GB has ext 2 and 3. But the main one of 2 GB can be partitioned only with ext 2. I am using Amon Recovery 1.5.2. When I press create ext 3 I get an error and not even from console it doesn't work, I get upgrade_fs not found.
Click to expand...
Click to collapse
I would say it IS the same problem and that your card is not being partitioned properly. The reason it can't upgrade from ext2 to ext3 is because there isn't ext2 to begin with even though the partition process gave a "success" result in the Recovery. I'm using the same Amon 1.5.2 as well. It somehow will not format as the space will be there unformatted if you open the card in a partition application with GUI.
Going to the SD Card settings from within the OS you'll see the SD Card secondary use grayed out and showing "unknown."
So what is the solution? What if I buy a new card Class 6 that can't be partitioned?
adair said:
So what is the solution? What if I buy a new card Class 6 that can't be partitioned?
Click to expand...
Click to collapse
I would say keep your receipt and return it for another. I've had issues with SD cards before where they kept going corrupt within a day of use and just returned them for another (same brand, same model) that would work fine.
It's not a hardware problem, I managed to partition it after some tries. I think that Amon RA recovery does not recognize the sd card sometimes. It worked after I hit the reboot button in recovery and pull out the battery. After that I went back to recovery and I could partition it.
vwyankee said:
So, version 9.0 has the options for the needed Linux pblah blah blah blah
.... windows .....
blah blah blah
Googling/searching for a long time for a similar situation.
Cheers.
Click to expand...
Click to collapse
bug a friend with a linux///mac machine and partition it with that. i've seen lots of problems with usb/partitioning on windows ,and never had the same problem on mac/linux. 3 microsd cards were 'unusable' according to vista, reeformated just fine with osx.
give it a shot.
adair said:
It's not a hardware problem, I managed to partition it after some tries. I think that Amon RA recovery does not recognize the sd card sometimes. It worked after I hit the reboot button in recovery and pull out the battery. After that I went back to recovery and I could partition it.
Click to expand...
Click to collapse
You verified it worked with looking in the SD card and Phone storage settings?
I've also discovered that the 4GB card that I was able to partition without a problem was one I should've thrown out as I couldn't remember where it came from until after dealing a couple days of constant lockups on the phone (now that things are running off the SD). It was thrown in a drawer due to going corrupt every few days where the data on it was lost/gone/unreadable. Going out to get a new SD card today.
To the statement about bugging someone with a mac/linux, that doesn't appear to be the issue here since it won't work with using Gparted either (at least in my case).
Just an FYI update, that after buying a new (not the lowest end) SDHC class 6 8GB card, it partitioned just fine in the recovery image along with being able to upgrade the ext2 to ext3 then ext4. Now I'm finally seeing the speedy benefits running Cyanogen's latest ROM. No issues since replacing with a good card.
Short story: Was running the latest (as of Dec. 4-5) ICS ROM(s) - the ones with the SD card bug - and my SD card appears to be shot.
Long story:
-----
I had been using the various betas of the ICS ROMs since I noticed Tytung's first Alpha was out and the ROMs had been improving rapidly. I guess when the headphones issue was fixed it caused problems with reading the SD Card which was documented and seems to be well known.
The constant SD messages didn't bother me much, but eventually I noticed launch icons missing and went to the Market to re-download one of the apps I use (I've been flashing so much, I wasn't sure which apps I didn't bother restoring). The Market app tells me I need a SD Card to install apps, so I just figured it's just the instability of the sd card mount for this latest batch of ROMs and I'll flash an older ROM off my SD card when I get the chance. I also noticed the messages started saying I inserted a blank SD Card but I brushed it off (couldn't look into it at the time).
I get home and find out Clockwork refuses to mount my card which means I can't easily wipe and install something else, so I switch to USB storage mode in CWM to simply transfer a ROM from my PC and my PC only sees ~30mb of my 16GB SD! I initially thought it was just some corruption but I tried all sorts of format and partitioning programs and nothing recognizes more than 30mb of space and none have even been able to format that little space that's showing.
I've been Googling for a while and came up with nothing I haven't already tried so I finally decided to post here. Is there any hope for my SD card? Being the holiday season and for once I've got most of my Christmas shopping done early, I'd rather not waste the little money I have left to run out and buy another SD card right away if it's not necessary.
-----
Does anyone have any ideas how I could fix this? I'd greatly appreciate it because I now stuck with WM6.5 and realize how much I didn't miss it for the past year
This is also a heads up for testers to be sure to upgrade their ROM ASAP (or at least to the kernel that fixes this) if they're on a ICS ROM with an SD card bug. I'm not complaining - I know this is a part of testing early builds (please ignore my sorry post count; I've been flashing for quite a while) - but there's no reason for others to go through this issue if it can be helped.
Have you tried EaseUS?
Sent from my LG-VM670 using Tapatalk
Yes,
Try Easus Partition Manager and/or MiniTool Partition Manager.
They can help but you will have to format your SD card I think.
Good luck!
I had the same problem. I plugged my card into a USB reader after it working error free, it then said it needed to be formatted and was only showing 30mb. After formatting repeatedly it still doesn't read. I haven't retired any positioning software but i think the card may just be done with.
Sent from my HD2 using XDA App
probably you'll need a replacement.
have you tried the SD formatter? there's like a 0.000001% chance it will work in your case, but why not try it?
Just looking for some help guys.
A few days ago my phone suddenly dropped from 20mb free space to 4mb and wouldn't stop giving me the warning about available space.
SO I remember this was an issue with people who upgraded to Froyo. So I decided to wipe my phone. after the wipe the phone started rebooting everytime I installed/upgraded an app.
So I loaded up RSD Lite and flashed Froyo on it and the phone now randomly reboots about every 2 mins. I even tried downgrading to eclair, but it just gives me errors when the flash is complete.
So just looking to see if anyone has any recommendations, or is my phone destined for that great recycle bin in the sky?
Hi!
Well, I belive that I may remenber a similar issue some months ago... I dont remenber well how I really fixed and I almost sure that it fixed by reflashing again with froyo, sine this is the only resource that I had to try it out... also seems that when You upgrades to Froyo is not possible to downgrade/return to a previous android version (and it seems that is not only in FlipSide, so seems the same for other Moto models...)
so, by the way, I may suggest... Remove Your SiM and SD memory cards, Put the phone in flash mode an reflash the froyo again, and also backup you personal files from Your SD memory card and erase everything from SD memory card (prefer reformat your SD card) and then when Your phone reboot normal and after an initial setup BEFORE recopy your personal files, AGAIN reformat WITH YOUR PHONE MENU OPTION Your SD card and do an factory restart... may sounds silly so lot of erase and wipes... but in my case, after this such harsh cleanning make my trouble phones working fine and stable again, and after that I restore again my personal files to my SD card.
Good luck and best regards!
xaser66 said:
Hi!
Well, I belive that I may remenber a similar issue some months ago... I dont remenber well how I really fixed and I almost sure that it fixed by reflashing again with froyo, sine this is the only resource that I had to try it out... also seems that when You upgrades to Froyo is not possible to downgrade/return to a previous android version (and it seems that is not only in FlipSide, so seems the same for other Moto models...)
so, by the way, I may suggest... Remove Your SiM and SD memory cards, Put the phone in flash mode an reflash the froyo again, and also backup you personal files from Your SD memory card and erase everything from SD memory card (prefer reformat your SD card) and then when Your phone reboot normal and after an initial setup BEFORE recopy your personal files, AGAIN reformat WITH YOUR PHONE MENU OPTION Your SD card and do an factory restart... may sounds silly so lot of erase and wipes... but in my case, after this such harsh cleanning make my trouble phones working fine and stable again, and after that I restore again my personal files to my SD card.
Good luck and best regards!
Click to expand...
Click to collapse
THanks, I think you're onto something with the SD card. I remember months ago I had an issue with the phone rebooting if I had this one certain SD card in my phone. Thanks for the help and joggin my memory.
[Q] Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report"
Hi,
First let me say - YES, i have searched all of the forums here (and a number of other sites) and seem to have tried almost every option.
I have Chronic "Unexpected Lack of Boot Partition on the SD card! Please Report" problems. The farthest I get guaranteed is the cyanogenmod boot and menu (if I try and bring it up). I'm simply trying to get the SD card with cm7 to boot reliably and not eventually loose the boot partition.
Off and on since spring I was able to burn a CM7 image (verygreen's size agnostic, and one or two others I have since lost track of) to a SD card; have had it boot to cm7 and it work for awhile - but then eventual degraded into the no partition found error. the majority of the time it just doesn't work and results in that annoying purple black screen.
When it does work, it only works for awhile and then the boot partition can't be found; a few very small 3 of times - if I copied a new update it woke back up ad worked for a couple of reboots then lost the partition again.
Anybody got time to take pity on my melted brain and take a few guesses?
Clearly I'm not only missing something - but as things have gotten worse, am now missing more (if that is possible) as I'm going backwards to see why it no longer works at all.
At this point wrong has happened so often, I'm just lost on what even worked way back when I started.
I'm trying to backtrack to where it at least worked a little for a few days...but noob world is decaying into worse world.
I tried a couple of other, older processes and a multiboot menu one that seemed promising (plus could handle the new naming conventions for 7.2 CM7); but that one never even got past the missing boot partition.
I have tried approx 10 2gb SDCards, Sandisk, Kingston, Unknown; Class 4 and mixed.
I have tried 3 8GB SD Cards, Sandisk, class 4
I have tried 1 16gb SD Card, Sandisk, class 4
I have tried a Vivitar Micro SD Card Reader
I have tried the micro SD card Adapters in a laptop, and then in a sandisk USB adapter.
I even tried doing it all using the Nook color via a USB cable.
I even tried leaving the nook color off and connecting the USB cable to the PC to initiate a boot.
Using Windskimager
Using SD formatter
Have formatted Full erase and overwrite.
Tried leaving partition size alone
Tried partition resizing up to 250mb
Tried cm7 zip alone and with gapps
WinXP on 2 desktops and a laptop
It sounds like you have run the gamut of attempted resolutions.
That message is part of the verygreen partitioning script that runs every time the verygreen recovery is run. So, that means the normal boot kernel for CM7 is not loading.
The way the verygreen SD should operate is it starts with uImage and uRamdisk on the boot partition. Those are verygreen's recovery files. The first time it is booted, it looks at your emmc to be sure it is a nook. Then it looks at the SD to see if it has been partitioned yet. If it is not, it partitions it into those partitions necessary for installing ROMs. After partitioning, it looks for a zip to install. If it does not find one, it shuts down and the next time it boots it does the same thing until it finds the first ROM zip to install. If it finds one, it installs it. The first time it installs a ROM, it renames those uImage and uRamdisk verygreen files to uRecImg and uRecRam and they become the verygreen recovery files. And it installs new uImage and uRamdisk files from the zip to become your CM kernel and ramdisk. These are what normally will load in the future to start CM.
Now, with the disk partitioned and CM installed, ordinarily, after the cyanomod logo comes up, it boots by default to CM via the uImage and uRamdisk files. If you intercede with the boot menu and tell it to boot to SD recovery, it looks for uRecImg and uRecRam to load the verygreen recovery. If that is loaded, the verygreen script does all its checking again, it verifies that emmc is a nook, then tries to verify if the SD is partitioned. If it is, it looks for a new zip to install. If, in checking to see if it is partitioned, it cannot find partition 1, it gives that message that has been bugging you.
So I see two things that are happening to you.
First, it is booting to the verygreen recovery first instead of CM. That could be due to a recovery bootloop happening. Look at my tips thread linked in my signature to see an explanation as to what that is and how to possibly get out of it.
Second, after it boots to the verygreen recovery, it does its checking and cannot find partition 1 of the SD and gives you that message.
What I cannot understand is, if you have no partition 1 on your SD, how is it booting to the verygreen recovery?
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
After this happens to you again, take the card out and put it in the PC. Tell us what you see. What files are there? Maybe look at it with Mini-Tool Partition Manager and see what partitions it reports.
leapinlar said:
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
Click to expand...
Click to collapse
Ditto on that - especially as it boots happily to that error message time after time after the green cyanomod screen appears and I can also do the menu trick to get it to go into recovery.
Just as a clarifier: A number of times it tried to do the install (text flowing by) and at the end claims it can't find the boot partition - odd (unless I have less of an idea of what I am doing than I think) as isn't all that running from that partition? A fairly even number of times it doesn't even run the install and just errors out right up front.
Once in a great while it all works, and I'm good for a few days - but eventually upon rebooting to get it back to normal (either by menu choice or by pulling the sd card) - all I get is that lack of partition again.
leapinlar said:
What you have not told us is what you have on emmc. Stock? Does it boot properly without the SD installed? Or does it go to stock recovery?
Click to expand...
Click to collapse
Yes with the SD card out it boots to stock, although a few time what looked like the CWMod menu came up after I shut down and started up without the SD card installed. Maybe only 2 or 3 times out of WAY to many boots to stock so the kids could read their books while I went to work.
I have even tried resetting the nook to factory on the off chance I did something dumb while mucking about to cause that.
leapinlar said:
After this happens to you again, take the card out and put it in the PC. Tell us what you see. What files are there? Maybe look at it with Mini-Tool Partition Manager and see what partitions it reports.
Click to expand...
Click to collapse
Will do so later tonight and will read the notes in your signature as well.
I saw something go by about the boot partition having to start at the 63 block or something - I can't believe ALL my SDcard adapters / writers are bad, but could the nook reader be screwy? Anyway to do a real test? I've been using the Easeus Partition Manager, but will try the Mini-Tool Partition Manager.
Thanks for the step by step explanation of exactly what happens in the process so I can again get a handle on what it's all doing. That all makes sense to what it looks like it tries to do. Deeply appreciate the time!.
You know, I am beginning to suspect something is wrong with your card reader built into the nook. Some sort of intermittent thing like a pin not making a good connection to the card. Put an ordinary SD in it and see if your stock can consistently read it.
Is your unit still under warranty? You might want to explore seeing if you can get it replaced.
Your downloaded verygreen image might be corrupted. Have you tried re-downloading it?
Sent from my NookColor using xda app-developers app
leapinlar said:
You know, I am beginning to suspect something is wrong with your card reader built into the nook. Some sort of intermittent thing like a pin not making a good connection to the card. Put an ordinary SD in it and see if your stock can consistently read it.
Is your unit still under warranty? You might want to explore seeing if you can get it replaced.
Click to expand...
Click to collapse
I had thought of that too - at stock it seems to have no problems reading consistently; I've done surface tests using partition manager - but haven't located any real other options of hard testing like once done for hard drives.
Plus the fact that sometimes, it will work for days before it craps out.
j8048188 said:
Your downloaded verygreen image might be corrupted. Have you tried re-downloading it?
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
A number of times - I went through and wiped all my downloads for the latest try.
Okay So As I mentioned I went back and wiped everything I had downloaded and restarted (again).
Current status is it's working BUT:
suspiciously too easy this time, worked first shot
- (having said that, I've had looking stupid and asking suddenly means it all starts working - so if it's that I'm good with this)
I've only rebooted into CM7, not back to stock at any time
Have not removed the SD card
I've not had time to load up the apps I like, just the kids games
- (sometimes I think it's the more wanted, the less reliable)
Obviously because I haven't removed the SD card, i haven't been able to retry things enough to recreate the other problems of boots right, yet can't find the partition when it really counts.
Changes (listing stupid things too, just because):
-Went back to my sandisk class 4 16gb HC card
-changed USB adapter back to sandisk one, using a sandisk micro to SD adapter that specifically says sdhc (although I think that is really just marketing
-Formatted the SD in the Nook x2, and did not use SDformatter
-Looked at the partition on the card with MiniTool not Easeus partition manager
-There is a step in verygreen's where you pop the card out and reconnect to the PC BEFORE adding the cm zip, made sure to do that - but could swear I had done it before.
Full painful boring steps that SO far has gotten it past the first stage of creation (again the full test is when I boot into stock a few times, or remove the SDcard for anything, or load my really wanted apps on the android side):
--Also note my lack of class 4 Sandisk cards, I only had one after all. BUT I have had this all work to this point with the 16gb only to have it go south.--
Painful details is so I can catch what is really worthwhile different as even WHEN I get it to work, I'm going back to try all the other cards because it worked so oddly and failed so oddly and differently - but that's just me.
> The 2GBs are:
6 Sandisk SD, don't see any class Rating
2 no brand SD, don't see any class Rating
1 Kingston SD, don't see any class Rating
> The 8gb are SDHC "Adata" Class 4 SDHC
> The 16gb is a Sandisk Class 4 SDHC
Using the 16GB Sandisk Class 4
--------------------------------
> Nook booted to stock
Inserted SD Card
Unmounted
Formatted sucessfully
unmounted and removed
> Put in Red SD / SDHC Adapter
Put in Sandisk MicroMate SDHC to USB Adapter
Put in Front USB spot
> Mounted as E Drive
E Drive shows standard Nook Folders:
.amdroid_secure
B&N Downloads
LOST.DIR
My files
> MiniTool Partition Wizard
Surface test = all good.
>Write the image on your SD card
Used Win 32 Disk Imager
After done with writing, eject and then re-insert the uSD card into your computer.
Two Partitions - 118 and 14.72gb
>Copied to card:
update-cm-7.1.0-encore-signed.zip
Installed correctly
configured wireless
Rebooted = OK
Rebooted = OK
>Turned off
Removed SD Card
Put in Red SD / SDHC Adapter
Put in Sandisk MicroMate SDHC to USB Adapter
Put in Front USB spot
copied gapps
>Boot into Recovery
Gapps installed
> boot
all good
did all set ups like before
added apps (7 games for kids)
rebooted twice
started using
added one app I really like (newshog)
Listening for drumming... nothing so far (Dr. Who reference)
I'm going to go the weekend before rebooting to stock as I can do some adding, and rebooting to android.
Maybe backup the droid side this time around.
THEN the death tests on Monday
-thanks for listening_
p.s. - Yes, I still suspect the card reader somewhat as REMOVING may be where it breaks down.
However, once or twice when I had the Unexpected lack of boot partition error - I was able to bring it back by doing a CM7 update via recovery, despite it refusing to find the boot partiton immediately previously - of course that means the SDcard was removed and reinserted. Most time reinsertion = no help.
You do not need to remove the SD to test booting to emmc. Just press and hold the n button during the boot until the boot menu comes up. Then select emmc/normal and boot. It will boot to stock. The only problem with doing that is now your SD boot partition is 'sdcard'. But should work for testing stock.
leapinlar said:
You do not need to remove the SD to test booting to emmc. Just press and hold the n button during the boot until the boot menu comes up. Then select emmc/normal and boot. It will boot to stock. The only problem with doing that is now your SD boot partition is 'sdcard'. But should work for testing stock.
Click to expand...
Click to collapse
Yes, I know - but it's two separate tests to see which one caused the problem.
Turns out that neither was needed - it was easier to create; my son simply turned it off (not a reboot cycle as I had been doing which worked).
When it was turned on, it no longer boots - it goes straight to BSOD (actually deep purple).
Booting into recovery gets me:
Penguin Logo
rcS!
Populating /dev using udev: done
Initializing random number generator.... done.
modprobe: chdir(2.6.32.9): No such file or directory
Starting Network...
Detected Standard B&N nook layout, emmc first
Error! Unexpected lack of boot partition on the SDCARD!
Please Report!
Poweroff when ready
Since I'm till held to the noob reposting limit of once every 5 minutes and the captha I can barely read - I'll post MiniTool result in about 5 minutes. I'll link a screen capture if i can here.
I tried to boot per menu to the EMMC stock; Clockworkmod Recovery v3.2.0.1 came up. I know I did emmc and what ever the second default is (which should be normal) - I'm pretty sure it was normal.
I offed it and did the same and confirmed it was the default; THIS time it came up Nook stock.
Is there some way I installed something to the stock NOOK and didn't remove it when I restored to factory? The other day I did the restore from that same clockworkmod screen NOT from the stock Nook environment.
I'm wondering if I somehow created my own monster way back when I first started this and was playing in the android environment.
I just edited what I wrote a few seconds ago. The reason it went to emmc recovery is because the recovery flag was not reset when that SD Recovery told you that error. Did you read my tips about recovery bootloops? When you exited 3.2.0.1, it cleared the flag and booted normally.
I still suspect hardware issues.
Just for Ha, Ha's I hooked the Nook via USB to the PC.
G Drive "Removable Disk G" (wants a disk to be inserted)
E Drive "MyNookColor" ( Lots of what I assume to be standard Nook folders.
See my edit above.
Attachement # 1 SD Card from Mycomputer:
Attachment # 2 MiniTool View of SD Card
Boot Partition
Properties using Minitool Partition Wizard (attached):
Used
Partition Info
File System Info
Surface Test of Boot Partition:
Perfect - so no picture.
This is SO aggravating - I almost would accept just knowing why rebooting wrecks something if I knew WHAT).
leapinlar said:
I just edited what I wrote a few seconds ago. The reason it went to emmc recovery is because the recovery flag was not reset when that SD Recovery told you that error. Did you read my tips about recovery bootloops? When you exited 3.2.0.1, it cleared the flag and booted normally.
I still suspect hardware issues.
Click to expand...
Click to collapse
Sorry, apparently not closely enough - got lots of time again.
....didn't expect that anyone would be watching, was busy posting pictures so I could go away and read and think...
Probably is hardware - wish I had some way to vigorously test that, I get that basic use in Nook Stock doesn't really prove everything is good.
Plus I bought refurbished and I have to go dig up the warranty, it was months ago, so not too hopeful and boxes long gone. Don't know how nice B&N is, free replacement charger and cord is one thing - whole another refurb unit is different if I can't show stock SD card reading is an issue, not sure how much they check, but I don't think they care about CM7 off a SDcard not working!
Everything looks perfect on that card. All the right files, partition sizes, etc. You have stock on emmc, CWM 3.2.0.1 on emmc recovery.
I still suspect hardware issues. Powering off makes card semi-unreadable. Can still boot to it but when checking for partition information on SD fails.
If you registered your nook, the serial number is all you need. Refurbished usually have a one year warranty. Mine did. Just tell them card reading is intermittent. Which it is. They are pretty generous. You still have stock on there.
Edit: Try just an ordinary SD and power off, reboot, and repeat many times and in between check card reading ability.
leapinlar said:
Everything looks perfect on that card. All the right files, partition sizes, etc. You have stock on emmc, CWM 3.2.0.1 on emmc recovery.
I still suspect hardware issues. Powering off makes card semi-unreadable. Can still boot to it but when checking for partition information on SD fails.
Click to expand...
Click to collapse
Yup, it's really the only thing that hasn't been able to be changed through all of this.
I've mostly gotten these results - I've managed to make it worse as I redid things and apparently got sloppy. But when going back to methodically following instructions I have what I had months ago. I had hoped buying other cards would make it at least act differently.
Thanks for all of the reviews and double checking, at least I now it's not something obvious (but wasn't obvious to me) that I missed along the way!
I'll have to call B&N and see how strict they are and if they take the "It just has trouble reading any SD card consecutively".
Now where was that review of the Nexxus 7.... and I wonder how all the tablet prices are going to drop especially for the Galaxy Tab. Buying is not as fun but I am completely beat with modding failures.
We are too fast with each other. Lol. See my edit above.