Hi,
Have installed recently WP 7.5 by Pdaimatejam:
http://forum.xda-developers.com/showthread.php?t=1356833
All fine, except couple of bugs:
1. Can't run any web browsing application. When trying to open IE I get the Home screen all the time. Same applies to any other applications that requires web browsing (i.e. news, weather updates etc.)
2. I can see the email headings, but can't open any of them. When clicking on message I get the Home screen. Have a Gmail account.
3. Battery drain. I guess this is common. Have downgraded the radio version to 5.51, with no improvement. Tried the trick with camera (http://forum.xda-developers.com/showthread.php?t=1041912). Same problem. Any idea?
Any advise is much appreciated.
Thanks.
Hi!
1&2. What language are you using? Have hear wierd reports of programs not starting and what not if you use different language than the standard ones in the release...
3. Camera-trick should not be needed anymore with new version Drain is quite common... Try to flash hardware radio 2.12 - some people are reporting good results with that one!
/Anders
Language
Hi Anders,
I'm using English (US). Located in Europe.
Eduard
Then that isn't the problem I would say Have you tried a factory reset?
Anden1986 said:
Then that isn't the problem I would say Have you tried a factory reset?
Click to expand...
Click to collapse
Tried factory reset. Did not help.
Damn this problem seems wierder and wierder... I know it's a long shot but how about reinstalling the build from scratch? Seems like the only option left! I suppose the problem is there on both wifi and 3G? Have you installed any apps before the problem presented itself?
Anden1986 said:
Damn this problem seems wierder and wierder... I know it's a long shot but how about reinstalling the build from scratch? Seems like the only option left! I suppose the problem is there on both wifi and 3G? Have you installed any apps before the problem presented itself?
Click to expand...
Click to collapse
My 3G and WiFi are working fine. I can access Market and install applications. Just can't do web browsing. Tried couple of web browser. Nothing works.
Anden1986 said:
3. Camera-trick should not be needed anymore with new version Drain is quite common... Try to flash hardware radio 2.12 - some people are reporting good results with that one!
/Anders
Click to expand...
Click to collapse
Seems like I have a problem upgrading the hardware radio. I guess my current version is 2.08 (this is what I see in the bootloader: SPL-2.08). I use Custom_RUU while in bootloader and RUU_Signed.nbh (which is the re-titled file of radio version I've downloaded). Still when I complete the upgrade and go back to bootloader I see the same info: SPL-2.08.HSPL 8G XE. Any idea why it doesn't upgrade the radio?
The version you read as 2.08 is the SPL version Radio version is not displayed unless you are running WM6.5 unfortunatly... On the other hand if the installer ran as it should you are probably on the version you installed!
Anden1986 said:
The version you read as 2.08 is the SPL version Radio version is not displayed unless you are running WM6.5 unfortunatly... On the other hand if the installer ran as it should you are probably on the version you installed!
Click to expand...
Click to collapse
So there is no way I can see what hardware radio version I have installed on my LEO? The version shown in About screen does not change whatever I install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is ok...
dxdy said:
this is ok...
Click to expand...
Click to collapse
Still, I run out of battery in just 1 day. I've tried both combinations (2.12/5.51 and 2.15/5.51). Same result.
i had a similar problem with winmo 6.5 installed earlier on my phone....
i did a factory reset....set up the profiles and stuff....and thereafter did a soft reset and the web browser started working all fine....dont know bout win 7.....but i think u can give it a try....if internet is working elsewhere then its most prabably an issue with the settings....
Related
hello everyone.. been a few day on this forum and i love it.......
sorry to be a bother i have tried looking at different post but cant seem to find an answer...
sometimes (tooo many) the front keys on my tytn stop working...
internet,,messagine...up down left right.. and even the call buttons
is there a fix or any way to sort this problem... i would be really really grateful....try to touch the screen as little as possible
i have tried other roms like shaps 4.32 and nothing...actually kinda gave me some problems even with the camera button...
now i have installed origional upgrade from tytn in italian and spbshell2
thanks in advance....
If the problem is present using different ROMs then it has to be a hardware issue. The only exception would be if there is a program that you have installed with all those ROMs that is doing something strange. This might be evident if it only happens when running a particular application. Do you use a task manager to close running programs rather than just tapping the "X" to minimise them? Sometimes you can get strange behaviour just because of processor overload.
My guess though would be a hardware issue and possibly a loose d/pad connector or faulty D/Pad daughter board.
Mike
hmmm
i also thought might be something like that...
however this only started happening after i flashed the rom for the first time
i had to use the cid sim unlocker first....
and seems since the upgrade.. been having these problems....
before upgrade however everything seemed to be working fine.....
now even a downgrade does not fix the problem
HEEELLPPP
strange.. interesting
hey guys....
last night i tried updating my hard spl to version 2.6.. hardspl v9
well the update failed.. guess will be needing help for that
i downloaded WIZARD SERVICE TOOL so i could see my rom version.. to see what spl i was using but that gave me errors as well...
the good thing is that now....
my front buttons seem to be working fine..... well at least up till now...
will use the whole day and see how it goes....
thanks...
Check your SPL before you start trying to fix, It may have been successful. Hard SPL Ver 9 is for developers and really isn't needed for the lay person. It may throw up an error after flashing a rom ( no problems though).
To see if its Hard SPL ver 9 check if SPL is 2.60.
Cheers....
will do
i checked spl and have 2.6. FRONT BUTTONS STILL WORKING....
now i just need to find out why the wizard tool does not work....
so i can see other versions
has anyone tried it on windows vista...
see if i can try on an xp machine...
loving this place
thanks
Again, if you have ver 9 it WILL throw up an error message after flashing a new rom from the pc. Don't worry about it as this is normal. You have been warned....
Cheers...
woeeesssss
ah well.... back to old times.. lol.. yep the front buttons are not working again... started later this afternoon... tried to end a call that would not end...
tried other buttons and nothing... dead......tried to close all programs in taskmanager......still no life in buttons.....
WHAT YOU SUGGEST I SHOULD DO NOW....
this problem started when i upgraded windowsmobile.....to 6
now even if i reinstall windows mobile 5.. still have problems with buttons....
are there any other type of hardware updates.. eg.. spl that i am missing...
thanks as always
Sorry to say no amount of updates/changes to software will cure this it is a physical problem. As I said above:
a hardware issue and possibly a loose d/pad connector or faulty D/Pad daughter board.
Click to expand...
Click to collapse
So assuming no warranty you can check the d/pad connector. remove / clean contacts and re-secure with the two screws.
If that fails then I'd go for a new d/pad board.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mike
ohhhhhhhh
thanks for you fast reply...
is there a guide to opening the hermes.. work with pc.. but this will be my first ppc that will be opened
thanks
I am learning to port rom to update my favorite build. It may contain bugs but I know Glacier fans cant wait anymore
- Based on the newest HTC Glacier/MyTouch4G v1.17.531.2 OTA update (Android 2.2.1)
- I kept this build as stock as possible like a HTC update, no modding, no new Gapps, have lot of bloatwares... you can tweak/fix what you want.
- I have modified the htcclockwidget based on cryshop's 3D X'mas Fancy widget skin and it look great with animation weather too.
- Added some Asia auto APNs
What's not working
htcCamera can take wide mode only
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download
http://www.multiupload.com/H8UD6SNYE1
Installation:
- extract "android" folder on the root of your SD card
- Run "CLRCAD.exe" then "haret.exe"
Special thanks to
domineus, m-deejay, hastarin, iamgpc, tiger013, Letama, cryshop, and others
Enjoy
Nice to see one more build on Glacier Sense, I will try this now.
Thank you!
Lang
Build is multilang?
Thanks!!!!
Thanks! Will try it and report!
Looks good, booting as I type!!
yeah ...why not. Lets try it out
Hmm interesting always willing to try new things .
Downloading now. Will post results. Thanks!
how to make it multi-language?
Here is the new framework-res.apk to have the percentage battery icon.
Replace the file in /system/framework/framework-res.apk and reboot.
As always, backup your old framework-res.apk before updating
You can use rootexplorer or android commander to replace the file
Enjoy!
StrictlyPC
Great build, has been stable, battery drainage is acceptable.
Now, how can I remove the stock apps? most of them are non-functional apps anyways, like the wi-fi calling app (I would've loved if it worked :'S )
Been using this for about 3 hours. It seems slow to wake up from sleep, and a little slow going between calller menus. Otherwise I like it. Like above posted need to know how to get rid of unusable bloatware. Will try Astro or linda. I am using stock 3.14 rom with hard spl and 2.15 radio.
Updating the Kernel to the latest from MDJ and Hastarin does not break the camcorder and camera. Using Hastarin 8.6 right now and it doesn't seem to fix the wake up lag. It is better but still noticeable.
StrictlyPC
whats working and not working?
thank you sir.
can you tell me what you did do to the rom just so i know what's been done before i got a hold of it?
leoh said:
Great build, has been stable, battery drainage is acceptable.
Now, how can I remove the stock apps? most of them are non-functional apps anyways, like the wi-fi calling app (I would've loved if it worked :'S )
Click to expand...
Click to collapse
You may look at MyTouch4G forum, they have all mod, tweaks (battery, animation, remove bloatware...)
please use Titanium Backup for easy remove these bloatwares safely:
http://forum.xda-developers.com/showpost.php?p=9589555&postcount=19
beergenius said:
Been using this for about 3 hours. It seems slow to wake up from sleep, and a little slow going between calller menus. Otherwise I like it. Like above posted need to know how to get rid of unusable bloatware. Will try Astro or linda. I am using stock 3.14 rom with hard spl and 2.15 radio.
Click to expand...
Click to collapse
Maybe it heavy with stock rom, I am trying to optimize, deodex, zipalign, remove useless apps and use new initrd for faster IO... I am still learning
Thanks all for your reports
data issue
VERY GOOD ROM !
ONLY ISSUE, ONLY INTERNET WORHS WITH DATA, NO SYNC OR APPS USING INTERNET WORK !
HELP
Radion 2.15.50, Omega rom 16/12
Good build, But its very laggy, slow waking, Data is very unstable and freezes sometimes... hope to see future updates for this build!
WWE Custom Rom for HTC Alpine.Test Version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE. This rom won't brick your device.
U must have installed OS image(nk.nbf).
Download
http://www.4shared.com/file/E7BUU_g0/ALPINE_NS_ROM_V10WWE.html
See this great work by SHAHEN with a little ammendment by me that is (wm6.5 booting screen) in the start
http://www.youtube.com/watch?v=-D50DiLTjJU
If you also want a wm6.5 booting screen you can do the following
1. get the two files which are attached below
2. If you download SHAHEN's rom then its very good.......otherwise if you only want the wm6.5 booting screen then you may download only my files
3. copy the splash2.nb file to your windows directory in you ppc
4. now copy the splash_changer to you ppc and run it..
5. You are done now reset your device and see
extract the splash.rar file
it contains two files Splash2.nb (wm6.5 booting screen)
and splash.nb (wm6.1 booting screen)
splash2.nb can be directly copied to the windows folder
for Splash.nb first rename it to Splash2.nb before coping to windows folder
It would be great if somebody could upload some screenshots, cause my battery is dead and radio part is bricked. At the present moment I can't do it. Especially dialer screenshot, like this one, but with English captions.
I hope i could upload the screen shots
But my radio already bricked
And please somebody first install SHAHEN ROM before installing my splash screens because we want to know wether it already has wm6.5 booting screen or not
and if it did not have then you can follow my points and can have it
THanks
WTF
Russian version already contained wm 6.5 splashscreen like on the banner. So I'm confused.
But i already installed it before thats why i see no change
you can see my wm6.1 splash screen
so that i upload more with something different
Here is my windows7 and vista splash screen check it
Download it and then comment please
For all bootscreens the same method
rename the splash.nb file to splash2.nb
use the splash_changer given in above posts to install it
This it the ROM WM6 for Alpine or style WM6 fix???
If the ROM WM6, i can install software for WM6 in it or not?
qmha said:
This it the ROM WM6 for Alpine or style WM6 fix???
If the ROM WM6, i can install software for WM6 in it or not?
Click to expand...
Click to collapse
it's 2003 SE with theme.
Hi again
Wanna version 2.0? I have sucessfully cooked new rom(RUS). If u want, I can create WWE port. See more at http://4pda.ru/forum/index.php?showtopic=264429
Shahen said:
Wanna version 2.0? I have sucessfully cooked new rom(RUS). If u want, I can create WWE port. See more at http://4pda.ru/forum/index.php?showtopic=264429
Click to expand...
Click to collapse
Cool, yap, do so! Well done. It is still WM5, right? But a really good looking one!!
Waiting for the WWE port. No problems on flashing? Please, include the working flashing tool. Oh, I see, you did it, Thanx.
Update
Yep, no problems on flashing. RUS version works very well. I've started my work on WWE port 2 weeks ago, but..... I've got a little problem. Unfortunately, due to lack of free time, this project was temporary stopped. As soon as it is possible, I will continue to work on this port... I hope it will be ok.
Good work Shahen
Shahen said:
Yep, no problems on flashing. RUS version works very well. I've started my work on WWE port 2 weeks ago, but..... I've got a little problem. Unfortunately, due to lack of free time, this project was temporary stopped. As soon as it is possible, I will continue to work on this port... I hope it will be ok.
Click to expand...
Click to collapse
you are doing well,
but the thing is that i have given up and put my pocket pc aside i m doing CA ( Chartered Accountancy) that's why having no time for it.
Hopes are with you what ever work you do will be appreciated Thanks
At work
Ok. I've finally solved all problems. Today I'll start building WWE version. And perhaps, on the weekend I'll upload 2nd WWE version with a little Add-on.
Here's a ROM Update Utility Wrapper for the HD7.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It comes in 2 flavours:
task 29 -this performs a format of the binfs storage area after flashing a ROM.
This is the one you should use when flashing ROMs.
Hopefully, most ROM chefs will bundle this into their downloads with their NBH files for you .
task 00 - this does not perform any kind of format after flashing a ROM.
This is the one you should use when flashing just Splash screens or Radios.
It saves you from having to restore all your data.
Thanks goto:
cmonex & Olipro - for everything, as always.
pof - bootloader stuff.
udk - previous RUU wrappers.
ceesheim - The idea & my tester.
very nice good work
can this be use before flashing the new rom (old task 29)
or not yet?
elmanortega said:
very nice good work
can this be use before flashing the new rom (old task 29)
or not yet?
Click to expand...
Click to collapse
Nope, not made a separate task 29 tool, those should all be the same I think.
This is just an RUU that performs a task 29 after flashing a new ROM.
I know this ins't allowed but still doing it
THANKS Dave Shaw
its not working ....
Ok i got this thing working but on the dialog screen , it shows a blank for the original image.
It only shows the rom version that i want to flash eg. 5.66
Great tool to have.
Def gonna be included when I start releasing roms again.
cheers
can this wrapper be use for official update of rom and radio?
Its working for me now...
No u can only flash the radio with it.
Ttblondey said:
can this wrapper be use for official update of rom and radio?
Click to expand...
Click to collapse
yes that is possible but there is no need to use it on a OEM rom because that will always reset the phone , but on stock (OEM) radio you can use it and then the phone isn't reset.
Does this only work for HD7?
Thanks
Robbie P said:
Does this only work for HD7?
Thanks
Click to expand...
Click to collapse
I think so
It does not work on the device of my HD7-T9292 . Why ?
winphoneviet said:
It does not work on the device of my HD7-T9292 . Why ?
Click to expand...
Click to collapse
I'm having the same issue. I can't get the RUU program to recognize my device. My device will also not connect to active sync. I've searched and searched, but can't find any solutions to this. Can somebody please help us?
Evo4eva said:
I'm having the same issue. I can't get the RUU program to recognize my device. My device will also not connect to active sync. I've searched and searched, but can't find any solutions to this. Can somebody please help us?
Click to expand...
Click to collapse
Mine is an HTC HD7-T9292 and it works fine...
Are you at SPL 4.xx or higher? (5.1 maybe?)
if so, none of the loaders will work until you downgrade your SPL.
It works for my custom rom flashing on my HD7 T9292.
how are we supposed to use thsese because task 29 works for me sometimes and sometimes does not, I am confused...
I use it with my device "HTC HD7 T9292" Thanks
update my device "HTC HD7 T9292"
From Radio Software Version
Hardware revision number: 0002
Radio software version : 5.51.09.11a_22.31.50.09u
Radio hardware version: A.12.0.D4
rom : wp7 deepshining 8.1
to
Windows Phone 7 RADIOs (Mango with Internet Sharing)
Operator : Europe
rom : 5.12.401.01
Radio Software Version : 5.71.09.02a_22.51.50.21U
download it from :http://50.23.216.69/wiki/HTC_HD7/Rad...net_Sharing.29
Great Work
Thanks
error 240 but should i do now ???????
im currently on android nand
can i convert the phone to windows 7 ?
anyone ?. . .
task29 to erase nand
you can flash original WM6.5 or flash radio 2.15
then install MAGLDR and flash WP7...
look my signature, you have all there (look tutorial)
recommended ROM with radio 5.51
Is there a step by step tutorial for installing the best wp7 rom ? I also dont know exactly what to do..
Sent from my HD2 using XDA App
just look my tutorial from signature
https://rapidshare.com/files/3354188424/ROM_install_Tutorial_v1.4.pdf
Is the Pdaimatejam stable and good for daily use? I already have an activation key from MS can I use it on this ROM? Im currently using my MUIU and its pretty stable but i like how WP& works..
stability is bit of luck depends to your SDcard... if card stable before this not mean is good now.... you see this when try... if no problem then all is stable...
you can use your Live activation code....
Got a 2GB sandisk sdcard.. will try tomorrow, the download is really slow but thanks for the help
Sent from my HD2 using XDA App
thanks
do you need a live activation code ?
every HD2 ROM need Live activation code if you want marketplace
how much are they ?
free... just contact microsoft (phone or chat) and ask for Live activation code for HTC HD7
http://support.microsoft.com/contactus/cu_sc_selector_chat?ws=support
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@dxdy
I just tried three times to install the ROM mentioned in your signature.
I followed your guide step by step:
- Task 29
- flashed HSDPL 2.08 (it was on before, but did again just in case)
- flashed Radio 2.15
- flashed MagLdr 1.13
- used "UseLast24NAND" and "ClearSD MDR"
- flashed the newest ROM with 5.51 (1_HD2_Pdaimatejam_ROM_WP7.5_mango_7.10.8107.79_v7.3_radio5.51)
This all works perfectly, and the ROM is flashed. But after the flash is done, it reboots to the HTC logo and is stuck there. Removing battery does not help, it boots again to the HTC logo and is stuck again.
Any idea what I did wrong?
I have a German HTC HD2 from TMo. Android NAND was installed before.
In an older guide from you you wrote something about "Download HTC EU/WWE - only for EU phones". What is that? Do I still need that? If so: there is no download with "WWE" in its name on HTC site...
Saibaschbeis said:
This all works perfectly, and the ROM is flashed. But after the flash is done, it reboots to the HTC logo and is stuck there. Removing battery does not help, it boots again to the HTC logo and is stuck again.
Any idea what I did wrong?
I have a German HTC HD2 from TMo. Android NAND was installed before.
In an older guide from you you wrote something about "Download HTC EU/WWE - only for EU phones". What is that? Do I still need that? If so: there is no download with "WWE" in its name on HTC site...
Click to expand...
Click to collapse
this is old WM 6.5...
seems your sdcard is problem....
my SD card is the original HTC 2GB card. This should work, shouldn't it?
(at least flashing Android was not a problem)
Just downloaded and installed, works smooth but got 1 freeze. Marketplace, evrything working =) Just need to get used to WP7 but it looks kinda cool
Saibaschbeis said:
my SD card is the original HTC 2GB card. This should work, shouldn't it?
(at least flashing Android was not a problem)
Click to expand...
Click to collapse
not necessarily... since WP7 updated to mango, many sdcards stopped working in WP7...