hello everyone..new and neeeed help - 8525, TyTN, MDA Vario II, JasJam General

hello everyone.. been a few day on this forum and i love it.......
sorry to be a bother i have tried looking at different post but cant seem to find an answer...
sometimes (tooo many) the front keys on my tytn stop working...
internet,,messagine...up down left right.. and even the call buttons
is there a fix or any way to sort this problem... i would be really really grateful....try to touch the screen as little as possible
i have tried other roms like shaps 4.32 and nothing...actually kinda gave me some problems even with the camera button...
now i have installed origional upgrade from tytn in italian and spbshell2
thanks in advance....

If the problem is present using different ROMs then it has to be a hardware issue. The only exception would be if there is a program that you have installed with all those ROMs that is doing something strange. This might be evident if it only happens when running a particular application. Do you use a task manager to close running programs rather than just tapping the "X" to minimise them? Sometimes you can get strange behaviour just because of processor overload.
My guess though would be a hardware issue and possibly a loose d/pad connector or faulty D/Pad daughter board.
Mike

hmmm
i also thought might be something like that...
however this only started happening after i flashed the rom for the first time
i had to use the cid sim unlocker first....
and seems since the upgrade.. been having these problems....
before upgrade however everything seemed to be working fine.....
now even a downgrade does not fix the problem
HEEELLPPP

strange.. interesting
hey guys....
last night i tried updating my hard spl to version 2.6.. hardspl v9
well the update failed.. guess will be needing help for that
i downloaded WIZARD SERVICE TOOL so i could see my rom version.. to see what spl i was using but that gave me errors as well...
the good thing is that now....
my front buttons seem to be working fine..... well at least up till now...
will use the whole day and see how it goes....
thanks...

Check your SPL before you start trying to fix, It may have been successful. Hard SPL Ver 9 is for developers and really isn't needed for the lay person. It may throw up an error after flashing a rom ( no problems though).
To see if its Hard SPL ver 9 check if SPL is 2.60.
Cheers....

will do
i checked spl and have 2.6. FRONT BUTTONS STILL WORKING....
now i just need to find out why the wizard tool does not work....
so i can see other versions
has anyone tried it on windows vista...
see if i can try on an xp machine...
loving this place
thanks

Again, if you have ver 9 it WILL throw up an error message after flashing a new rom from the pc. Don't worry about it as this is normal. You have been warned....
Cheers...

woeeesssss
ah well.... back to old times.. lol.. yep the front buttons are not working again... started later this afternoon... tried to end a call that would not end...
tried other buttons and nothing... dead......tried to close all programs in taskmanager......still no life in buttons.....
WHAT YOU SUGGEST I SHOULD DO NOW....
this problem started when i upgraded windowsmobile.....to 6
now even if i reinstall windows mobile 5.. still have problems with buttons....
are there any other type of hardware updates.. eg.. spl that i am missing...
thanks as always

Sorry to say no amount of updates/changes to software will cure this it is a physical problem. As I said above:
a hardware issue and possibly a loose d/pad connector or faulty D/Pad daughter board.
Click to expand...
Click to collapse
So assuming no warranty you can check the d/pad connector. remove / clean contacts and re-secure with the two screws.
If that fails then I'd go for a new d/pad board.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mike

ohhhhhhhh
thanks for you fast reply...
is there a guide to opening the hermes.. work with pc.. but this will be my first ppc that will be opened
thanks

Related

damn the new exe rom rocks !!!

just wanted to thanks all who worked it out,
so many less "extra" programs req now..
here is my new improved today skin + dialer...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
did you install the exec rom on the regular atom?
I did, and it's really great. No issues with camera, WiFi, or lines on the screen, all is well. I "upgraded" from the latest O2 Atom wwe rom.
boim said:
did you install the exec rom on the regular atom?
Click to expand...
Click to collapse
you bet !!
http://forum.xda-developers.com/viewtopic.php?t=52925&postdays=0&postorder=asc&start=100
Um so what did you do to upgrade??? Was it the official atom exec rom from o2, and was it a matter of just using active sync to flash the ROM???
Nice work by the way, looks funky..
Matt
Where may i download this new rom guys?
woftam placed the link to thread hosting the d/l
you are looking for the Edited_Xda-Atom-ENG-20060614_R060428N_EX0018_for_Atom version i think... I have d/l the rom but waiting on a answer before i install.....
Hope this helps.. god know i need some!!!
Matt
I can't understand... how it can be better - if you replace extended rom (hidden partition) with old atom... you will have old aplication on your Atom... nothing new..
kropotov said:
I can't understand... how it can be better - if you replace extended rom (hidden partition) with old atom... you will have old aplication on your Atom... nothing new..
Click to expand...
Click to collapse
OK dude,
Maybe you should read this thread "http://forum.xda-developers.com/viewtopic.php?t=52925&postdays=0&postorder=asc&start=100"
Not that hard to understand i reckon
NICE WORK AGAIN LADS!!!!!!!!!!!
As above,
the Exe rom has "extra's" that standard atom rom doesn't.
Download Rom from here:
http://rapidshare.de/files/27952658/Edited_Xda-Atom-ENG-20060614_R060428N_EX0018_for_Atom.rar.html
Unpack the rar ,
connect PDA via USB/ActiveSync
run Device Software Update Utility.exe
dont touch till finished !!!
done !!!
soo easy...
and due to me requiring less additional programs, this does run faster !!
LOL,
to prove:
exe come with 192 ram ??
Above : rom says 192,
actual is less
this version also fixes the bug (camera, wifi..)?
Well after having the modified exec rom on my atom for a few days i have decided to resort back to the original atom firmware "4261".
To be honest i could not find anything valuable enough to keep it. The original rom gives you the choice to install O2 plus and phone plus and the headset patch through O2 connect.
The wireless manager looks pretty and the world times is boring, so back to the original firmware for me. There are still a few bugs with the exec rom so i wouldn't bother.. CAM works fine and wifi work fine no matter which rom i use. I did notice i couldn't use small icons on my today screen with the exec rom.. other than that, nice try....
Does anyone know where you can get some cool themes for the atom like woftam has used in this thread?
Thanks for the hard work guys but will wait for the next rom from O2...
Peace
Matt
P.S if you need to resort back to the original firmware, remove your sd card, connect device via activesync, hold the cam button and the soft reset button to force the device into BOOTLOADER mode. Next run the rom exe from your PC and you are away.....
Does anyone know where you can get some cool themes for the atom like woftam has used in this thread?
Click to expand...
Click to collapse
matt,
I designed those themes myself,
you wont find them in the web...
yet.
once i have a few I will setup a page for us atom/WM5 owners
for downloading
I have installed Resco now,
http://www.resco.net/pocketpc/explorer/default.asp
and making some today skins,(not happy with current colors)
my today ATM:

Finally android on Artemis

All,
The project "Wing Linux" is hosted at sourceforge.net, the aim of the project is to
port Linux and Android on OMAP 850 devices.
Lots and lots of thanks to Cory Maccarrone <[email protected]> for porting android onto OMAP850
For more information on this visit
http://sourceforge.net/apps/trac/wing-linux/wiki
To download source code
git://wing-linux.git.sourceforge.net/gitroot/wing-linux
To install on artemis
downloadwing-linux-0.4pre3.zip from the download link http://sourceforge.net/projects/wing-linux/files/Wing%20Linux%20Development/0.4pre3/wing-linux-0.4pre3.zip/download on the sourceforge.net,
From the zip file install the following files in the given order
1) wing-linux-0.4pre3-rootfs.cab
2) wing-linux-0.4pre3-herald.cab
or
wing-linux-0.4pre3-prophet.cab
then browse to programs and run Wing-linux.exe
wait for 15 mins for the first time.
Pls test.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the advice dude, I give a try inmediatly.
I tried te rootfs and the herald cab works fine for me I my orbit.
The GSM works I receive a phone call and a SMS too and both works.
Need more work for let use the buttons: the right softkey and windows button type "6" and "N" and "M" respectively, and We need a back button urgently
If i use the wizard or prophet cab I use android in portrait because all is in landscape.
Can this be installed on a memory card or does it have to be installed into the device memory
pablo34 said:
Can this be installed on a memory card or does it have to be installed into the device memory
Click to expand...
Click to collapse
I think must be installed in SD Card because I dont have enough space in my device memory to install
thanx ryomahino, but i just cant seem to get it to work
Well I just make the steps posted in first post and wait.
Now I can run android but the buttons are not mapped yet, but xplayerku is working on that and maybe Darkstar can have a board support for artemis soon.
Oh ok thanx for the reply, ill just wait for the board support
have you gotten the buttons to work??
I wait the button support
how to close the applications?...... to do it ihave to remove the battery......
please
Android update
Hi Guys,
This rom cannot be updated on shady 313 WM6.5 Rom. if you want to update android you should change your operation soft ware to any other one.
Regards,
Hassam Moin
uzairrrrr said:
Hi Guys,
This rom cannot be updated on shady 313 WM6.5 Rom. if you want to update android you should change your operation soft ware to any other one.
Regards,
Hassam Moin
Click to expand...
Click to collapse
its not a rom
it's still experimental
it isnt finished yet
getting it run on half working hybrid 6.5 rom will be quite far down the priority list
just for the developers information, it runs fine on pdhee's last 6.5 rom...or rather it did until i tried it this morning and it crashed out with the kernel error that others are reporting (cant mount fs).
reading the dev lists it looks like some poeple think this is an sd driver issue or something that was introduced in the new version
waiting for a fix anyway
hi..... i found this http://sourceforge.net/apps/phpbb/w...sid=376427fb5e6d23cdd5c037d34389f847&start=10
i'm not a programmer and i can't compile kernel but i think this ca help you....
is there any guide for compile the kernel? i've downloaded the sdk on the mac os...
sorry for the english
cuzzo94 the page that you found is the page for this project
the reason for that you dont close applications its because until now we dont have mapped the hardware buttons.
xplayerku is working on that and maybe darkstar too (i hope so).
BabelOued work in a similar project few years ago.
BabelOued said:
Hi,
Did you see that i do all job your are doing again ? one year ago, check kernel here with all driver working for artemis, missing wifi / battery / sound now.
http://git.linuxtogo.org/?p=groups/mobile-linux/kernel.git;a=shortlog;h=refs/heads/htc-omap
Click to expand...
Click to collapse
like he said he has working some drivers.
Maybe some programmer could mix the 2 projects.
do you will relase a new version with mapped buttons?
thanks!
if you read the thread, they are discussing making a specific artemis board config.
i think this needs to be done before we get any more progress
once the board config is done for artemis it can be fixed to run properly, but we need to wait for them to do this.
at the moment there are board configs for wing, prophet, herald and wizard, but no artemis so our phones are being booted pretending to be one of these 4 devices (which is why it doesnt quite work properly yet)
ok thanks!
good job
mine says inmediatly when entering android; power off?

Phone version 3335 - HardSPL doesn't work

Hi All
I posted this information in the HardSPL thread, but I realise that most people won't read that thread again if HardSPL has already worked for them - so I'm posting here in the hope someone might have an idea. I have read the entire HardSPL thread and there is no mention of errors like I am getting:
I tried setting both registry keys mentioned in the original post of the HardSPL thread, and rebooted after applying each.
The first time I ran the batch file, I got a popup on the device, which I approved - but I still get these errors every time I run it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have tried from both XP 32bit, and Win7 64bit, with the same error.
I'm no expert with WinMobile, but to me the above error suggests the problem might just be a case of setting a security flag correctly somewhere?
Any and all suggestions are welcome!
My phone version details are in my signature:
Mod. edit: not dev related, moved to general
gl
Dude, first of all there are many who have problems with HSPL, if all of them make threads for their problems here it will be a mess. Second if you post it here most of us are not experts and cant help, the only one who can help is the creator, i dont know if he visit the General.
And why in your signature your phone model is T3335, i have never seen those numbers.
mirost1 said:
Dude, first of all there are many who have problems with HSPL, if all of them make threads for their problems here it will be a mess. Second if you post it here most of us are not experts and cant help, the only one who can help is the creator, i dont know if he visit the General.
And why in your signature your phone model is T3335, i have never seen those numbers.
Click to expand...
Click to collapse
Dude, first of all (as mentioned) I have read the entire thread on HardSPL, and there is nobody with these errors. Everyone who has errors with HardSPL that are not these errors, can read that entire thread, and their problems will be solved, but not this problem.
Second of all, I did not post this in General, a moderator has kindly moved it here (as mentioned) even though I thought it was Rom development related?
Third of all, I don't know if this is actually a rom problem, or simply a security problem on the phone. That is why (as mentioned) I posted this as a separate thread.
Fourth of all, my signature says T3335 because that is what my phone model is (as mentioned).
I would appreciate some valid feedback on this issue from anyone who could look at those errors and tell me if it's a problem with the phone or with the spl.
If its not a SPL or ROM problem, what could it be. I have never heard about T3335.
I just flashed my Telecom XT Touch 2 (T3335) ok with this HardSPL.
I had to go and change some registry settings ...go to my device - HKEY_LOCAL_MACHINE - Security - Policies - Policies and edit 00001001 (DWORD2) changed to DWORD1
Works sweet for me now.
skyplonk said:
I just flashed my Telecom XT Touch 2 (T3335) ok with this HardSPL.
I had to go and change some registry settings ...go to my device - HKEY_LOCAL_MACHINE - Security - Policies - Policies and edit 00001001 (DWORD2) changed to DWORD1
Works sweet for me now.
Click to expand...
Click to collapse
Effing LEGEND! I thought it was a security setting somewhere! How did you figure it out!! Thank you so much, this info needs to be added to the HardSPL thread!
It is alredy there ....
No, it is freaking not there, or else I am blind. The guide says update key 0000101B, not 00001001
I believe the Touch 2 T3335 is the WCDMA 850/2100 MHz variant of the Touch 2.
AaronNZ said:
Effing LEGEND! I thought it was a security setting somewhere! How did you figure it out!! Thank you so much, this info needs to be added to the HardSPL thread!
Click to expand...
Click to collapse
Just luck to be honest! I was stuck like you and just started playing. lol.
Anyway, have fun!

[Q] Web browsing problem with WP 7.5 Pdaimatejam

Hi,
Have installed recently WP 7.5 by Pdaimatejam:
http://forum.xda-developers.com/showthread.php?t=1356833
All fine, except couple of bugs:
1. Can't run any web browsing application. When trying to open IE I get the Home screen all the time. Same applies to any other applications that requires web browsing (i.e. news, weather updates etc.)
2. I can see the email headings, but can't open any of them. When clicking on message I get the Home screen. Have a Gmail account.
3. Battery drain. I guess this is common. Have downgraded the radio version to 5.51, with no improvement. Tried the trick with camera (http://forum.xda-developers.com/showthread.php?t=1041912). Same problem. Any idea?
Any advise is much appreciated.
Thanks.
Hi!
1&2. What language are you using? Have hear wierd reports of programs not starting and what not if you use different language than the standard ones in the release...
3. Camera-trick should not be needed anymore with new version Drain is quite common... Try to flash hardware radio 2.12 - some people are reporting good results with that one!
/Anders
Language
Hi Anders,
I'm using English (US). Located in Europe.
Eduard
Then that isn't the problem I would say Have you tried a factory reset?
Anden1986 said:
Then that isn't the problem I would say Have you tried a factory reset?
Click to expand...
Click to collapse
Tried factory reset. Did not help.
Damn this problem seems wierder and wierder... I know it's a long shot but how about reinstalling the build from scratch? Seems like the only option left! I suppose the problem is there on both wifi and 3G? Have you installed any apps before the problem presented itself?
Anden1986 said:
Damn this problem seems wierder and wierder... I know it's a long shot but how about reinstalling the build from scratch? Seems like the only option left! I suppose the problem is there on both wifi and 3G? Have you installed any apps before the problem presented itself?
Click to expand...
Click to collapse
My 3G and WiFi are working fine. I can access Market and install applications. Just can't do web browsing. Tried couple of web browser. Nothing works.
Anden1986 said:
3. Camera-trick should not be needed anymore with new version Drain is quite common... Try to flash hardware radio 2.12 - some people are reporting good results with that one!
/Anders
Click to expand...
Click to collapse
Seems like I have a problem upgrading the hardware radio. I guess my current version is 2.08 (this is what I see in the bootloader: SPL-2.08). I use Custom_RUU while in bootloader and RUU_Signed.nbh (which is the re-titled file of radio version I've downloaded). Still when I complete the upgrade and go back to bootloader I see the same info: SPL-2.08.HSPL 8G XE. Any idea why it doesn't upgrade the radio?
The version you read as 2.08 is the SPL version Radio version is not displayed unless you are running WM6.5 unfortunatly... On the other hand if the installer ran as it should you are probably on the version you installed!
Anden1986 said:
The version you read as 2.08 is the SPL version Radio version is not displayed unless you are running WM6.5 unfortunatly... On the other hand if the installer ran as it should you are probably on the version you installed!
Click to expand...
Click to collapse
So there is no way I can see what hardware radio version I have installed on my LEO? The version shown in About screen does not change whatever I install.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is ok...
dxdy said:
this is ok...
Click to expand...
Click to collapse
Still, I run out of battery in just 1 day. I've tried both combinations (2.12/5.51 and 2.15/5.51). Same result.
i had a similar problem with winmo 6.5 installed earlier on my phone....
i did a factory reset....set up the profiles and stuff....and thereafter did a soft reset and the web browser started working all fine....dont know bout win 7.....but i think u can give it a try....if internet is working elsewhere then its most prabably an issue with the settings....

[Q] Camera flash yellowish

There are many camera problems in N4....
Me and my sister both using N4....
I don't know why my camera clearly is super dum... And my sis clearly is awesome....
And i can't replace my mobile so please don't suggest me that....
And my camera with flash is showing yellowish.... I attached images file please look at this and please any expect tell me the solution of this....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AnyOne ?????
dip6691 said:
There are many camera problems in N4....
Me and my sister both using N4....
I don't know why my camera clearly is super dum... And my sis clearly is awesome....
And i can't replace my mobile so please don't suggest me that....
And my camera with flash is showing yellowish.... I attached images file please look at this and please any expect tell me the solution of this....
View attachment 2929983
View attachment 2929984
Click to expand...
Click to collapse
No one can solve this :crying:
Seems to me that your camera lens has some dust stuck in it, I had faced similar problems on my old Nokia. Try prying open the back cover then checking if the lens is clean. The flash becoming yellow isn't possible
rondias18 said:
Seems to me that your camera lens has some dust stuck in it, I had faced similar problems on my old Nokia. Try prying open the back cover then checking if the lens is clean. The flash becoming yellow isn't possible
Click to expand...
Click to collapse
there is not a dust problem i check it first :crying: .... anyway thanks for suggestion .....
one more thing is that's problem comes with after flashing custom rom .... i try to install original n4 rom again but this problem not leave my n4 ....
Any Expert who suggest me ???:angel:
dip6691 said:
there is not a dust problem i check it first :crying: .... anyway thanks for suggestion .....
one more thing is that's problem comes with after flashing custom rom .... i try to install original n4 rom again but this problem not leave my n4 ....
Any Expert who suggest me ???:angel:
Click to expand...
Click to collapse
I don't think this problem is software related, this is more hardware related. If all your efforts are failing then you'll have to show it in the service center, cause this is a rare problem
rondias18 said:
I don't think this problem is software related, this is more hardware related. If all your efforts are failing then you'll have to show it in the service center, cause this is a rare problem
Click to expand...
Click to collapse
i can't show it in service center.... and my camera works very well in first stock rom .... but after try custom rom unlock bootloader rooted then thats happen ....
dip6691 said:
i can't show it in service center.... and my camera works very well in first stock rom .... but after try custom rom unlock bootloader rooted then thats happen ....
Click to expand...
Click to collapse
Which ROM was it? Then try installing other ROM's. Also note your problem on the ROM official thread too, maybe the developer can help
rondias18 said:
Which ROM was it? Then try installing other ROM's. Also note your problem on the ROM official thread too, maybe the developer can help
Click to expand...
Click to collapse
currently use cm11 m9 rom .... i am tried almost 5-6 roms including stock rom but problem is still there .....
dip6691 said:
currently use cm11 m9 rom .... i am tried almost 5-6 roms including stock rom but problem is still there .....
Click to expand...
Click to collapse
You just said that Stock ROM isn't giving you problems, which is it?[emoji29]
rondias18 said:
You just said that Stock ROM isn't giving you problems, which is it?[emoji29]
Click to expand...
Click to collapse
I said that my first stock rom isn't problem but after change rom this problem excite... I also installed stock rom back but now this problem not leave me :crying:
Please help me someone...
No developer
Here is no developers who solve my issue :crying:

Categories

Resources