Galaxy s wont connect in download mode - Galaxy S I9000 General

my galaxy s wont connect to my pc while in download mode can someone help me with this?

conor_ said:
my galaxy s wont connect to my pc while in download mode can someone help me with this?
Click to expand...
Click to collapse
connect to what?
if you are trying to connect with Odin but you have Kies installed on your PC, there is a known issue where running services from Kies will prevent Odin from recognizing your phone. In that case: use task manager to identify and kill the Kies processes, stop/start Odin again and then connect your phone to the USB cable and Odin will see it.

more details
which rom have you been using last?
all drivers installed?
Kies running or not?
more details and we'll see

Related

[Q] Using Odin 1.7

Hi guys,
I am trying to use Odin 1.7, but I cannot get it to recognize my tab while in download mode. I can use Heimdall just fine.
I installed the USB drivers, but Odin does not show anything when I launch it.
I'm on Windows 7 and it shows "Gadget Serial" when plugged in.
Anyone have any advice for me?
Bump, can anyone give any advice? I can't get Odin to see that my tab is connected. Heimdall sees it just fine though.
Note, when I try to install the Odin 1.7 drivers, it tells me that the most updated drivers are already installed. Are the drivers for Heimdall the same ones as the Odin drivers?
Thanks!
Coolsaber57 said:
Bump, can anyone give any advice? I can't get Odin to see that my tab is connected. Heimdall sees it just fine though.
Note, when I try to install the Odin 1.7 drivers, it tells me that the most updated drivers are already installed. Are the drivers for Heimdall the same ones as the Odin drivers?
Thanks!
Click to expand...
Click to collapse
First you have to sync with Kies to get the right drivers installed. So download Kies, install it, connect youre tab with the pc and let youre device sync once with Kies. As all is ok, then you will see in youre device-manager from youre pc a "Samsung Mobile device' or something simular.
After that turn on usb-debugging. Put youre phone in the download-modus, [turn it off, press and hold volume-down+powerbutton] Start Odin, and the connect youre phone with the pc. You will see in Odin on the left a yellow box with the com-port.
On the end you are allowed if you dont use Kies to uninstall it. Leave the Samsungdrivers as they are.
Heppieboeddah said:
First you have to sync with Kies to get the right drivers installed. So download Kies, install it, connect youre tab with the pc and let youre device sync once with Kies. As all is ok, then you will see in youre device-manager from youre pc a "Samsung Mobile device' or something simular.
After that turn on usb-debugging. Put youre phone in the download-modus, [turn it off, press and hold volume-down+powerbutton] Start Odin, and the connect youre phone with the pc. You will see in Odin on the left a yellow box with the com-port.
On the end you are allowed if you dont use Kies to uninstall it. Leave the Samsungdrivers as they are.
Click to expand...
Click to collapse
I didn't think that Kies recognized CDMA tabs. Is that incorrect? Also, I tried looking the other day, but can you point me to the correct version of Kies to download?
If you use windows 7 it already has the drivers, but you have to connect to the pc, and go to network settings, usb, then copy files to pc, then disconnect, then you can reconnect the tab when it is in download mode.

No connection with odin

I tried everything but my phone cant get a connection with odin.
Kies is not running..
Phone is in download mode..
Started odin..
Connected USB but no connection..
I installed Samsung new pc studio for the drivers, still no connection..
Please help me
Sent from my GT-I9100 using XDA App
issam85 said:
I tried everything but my phone cant get a connection with odin.
.
I installed Samsung new pc studio for the drivers, still no connection..
REMOVE
Install latest KIes
connect phone in usb mode with debugging turned off
Let windows find USB drivers and install .
Check phone is a mass storage device and can be seen by windows as a drive .
jje
Click to expand...
Click to collapse

Connecting the S4 to Kies

I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
mcsephoenix said:
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
Click to expand...
Click to collapse
Sorry I dont have a better answer but try another cable if you have one. Ive seen this be the root of the issue many times.
mcsephoenix said:
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
Click to expand...
Click to collapse
when your phone is connected to your pc in devicemanager you must see: samsung android ADB interface(screenshot attached)
when not you can find the usb drivers here: http://down-load-drivers.blogspot.nl/2013/05/samsung-galaxy-s4-drivers.html
astraopcuser said:
when your phone is connected to your pc in devicemanager you must see: samsung android ADB interface(screenshot attached)
when not you can find the usb drivers here: http://down-load-drivers.blogspot.nl/2013/05/samsung-galaxy-s4-drivers.html
Click to expand...
Click to collapse
Thanks, the device currently comes up as a SAMSUNG SGH l537 I tried running the mini kies setup and the driver installation which oddly failed. Would you be able to give me the exact driver that yours is using. I cracked open that installer and the drivers are all there I should be able to force it to the right one.
mcsephoenix said:
Thanks, the device currently comes up as a SAMSUNG SGH l537 I tried running the mini kies setup and the driver installation which oddly failed. Would you be able to give me the exact driver that yours is using. I cracked open that installer and the drivers are all there I should be able to force it to the right one.
Click to expand...
Click to collapse
only the first day i bought my gti 9505 lte i updated my device via kies. after i rooted my s4, i never use kies.
After connecting my device the first time to my laptop, kies recognized my phone automaticly.
If there is an update for Kies, the program should recognize your device and install the right drivers.
Kies is only installed on my laptop for sync my wife's galaxy note 2. Her phone runs stock 4.1.2.
So normally must kies install the right drivers.Even for your device.
Regards
astraopcuser said:
only the first day i bought my gti 9505 lte i updated my device via kies. after i rooted my s4, i never use kies.
After connecting my device the first time to my laptop, kies recognized my phone automaticly.
If there is an update for Kies, the program should recognize your device and install the right drivers.
Kies is only installed on my laptop for sync my wife's galaxy note 2. Her phone runs stock 4.1.2.
So normally must kies install the right drivers.Even for your device.
Regards
Click to expand...
Click to collapse
I think having a 64bit OS in win7 might be part of the issue as well. I probably don't need kies at all but I thought it would be nice to add contacts via outlook. My contacts are all sorts of hosed up, I exported them to a csv from my atrix and imported them into outlook. The next step was to import them with Kies which I thought would be a no brainer. oh well, hopefully the kies wifi will work when i get home.
mcsephoenix said:
I think having a 64bit OS in win7 might be part of the issue as well. I probably don't need kies at all but I thought it would be nice to add contacts via outlook. My contacts are all sorts of hosed up, I exported them to a csv from my atrix and imported them into outlook. The next step was to import them with Kies which I thought would be a no brainer. oh well, hopefully the kies wifi will work when i get home.
Click to expand...
Click to collapse
My laptop runs windows 7 64 bit too. I had no issue.
Maybe you find the solution on zedomax's site: http://androidroot.org/videos.php?cat=90&sort=most_recent&time=all_time&seo_cat_name=
regards
mcsephoenix said:
I just got my S4 and I wanted to connect to Kies via a usb cable at work, no wifi available. So I installed KIES and connected it and I am getting the dreaded " Reconnect device in Samsung Kies (PC Mode)" and it tells me to disable usb debugging. I have verififed that PC debugging is off and reinstalled Kies but still I get the same message. My usb mode is MTP... Any suggestions? I have tried different usb ports as well with no luck. Is anyone using Kies?
Click to expand...
Click to collapse
All drivers where installed correctly ??? yesterday i got the same error and used w7 update to find the missing driver. Works fine now.
Still no luck, unfortunatly at work windows update is blocked so that is not an option here as far as the driver update.

Device boot looped and computer not recognizing the phone

Hello,Today I stupidly tried to root with kingoroot and bricked my phone, now I downloaded a new rom to fix it but now I see that my computer (or any computer) can't recognize the phone but I can still charge it
When I connect it to my phone it says device is malfunctioning. I am out of options and very frustrated
Please someone help me
Malone555 said:
Hello,Today I stupidly tried to root with kingoroot and bricked my phone, now I downloaded a new rom to fix it but now I see that my computer (or any computer) can't recognize the phone but I can still charge it
When I connect it to my phone it says device is malfunctioning. I am out of options and very frustrated
Please someone help me
Click to expand...
Click to collapse
Try to connect to odin. Put in download mode and connect to odin. Does odin recognise it?
callumbr1 said:
Try to connect to odin. Put in download mode and connect to odin. Does odin recognise it?
Click to expand...
Click to collapse
Nope, the computer dosn't detect it atall, I don't know if its a hardware issue or physical issue, im completely out of options and very frustrated

Please anyone help me... I tried alot

Somedays ago, i rooted my samsung galaxy s6 edge plus (sm-g928f). I was checking the settings and by mistake i have turned off the developer mode in settings and when i restarted mobile it is showing frp lock neither i can turn on mobile nor i can go to recovery... There is only one option for flashing firmware through download mode from odin but my mobile doesn't connects to any pc and laptop, I have checked with diffrent cables in different computers with all samsung drivers installed.
so, please tell me the solution. I can only charge the mobile now. I cant turn on mobile and recovery because of frp lock and neither connect through download mode as usb not detecting at all..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
Please Develeopers and experts please give me the solution for this problem.
Use ODIN to flash stock firm for your device - go to download mode and flash.
avenge said:
Use ODIN to flash stock firm for your device - go to download mode and flash.
Click to expand...
Click to collapse
As I already mentioned,I cannot connect mobile to PC through usb,it's download mode is not detecting in any PC in odin even all samsung drivers installed.
What USB drivers did you install?
Try removing the ones you have installed and then booting into download mode and letting windows get them automatically. I haven't installed any drivers for my phone, I plug in the USB and Windows detects and downloads them.... I'm on windows 10.

Categories

Resources