Related
Worked fine last night.
Still works on incredible.
It says I need new version
but it's not in market?
I have HTC Vision in build.prop
anyone know how to fix it?
Sent from my ADR6300 using XDA Premium App
I also used the htc vision fix.
I had the exact same problem last night. I opened netflix & couldn't use it, just got a message saying there was an update for the netflix app and I could not use the app till I downloaded the update. Clicking on the Ok button took me immediately to the update on the market, the screen where you can click to download the app.
Then the updated version of the app wouldn't work. Just an error message saying something like there is a problem with my netflix account, or my device has been deactivated at netflix.com.
I got it working again but had to try lots of things. I deleted the updated app, and tried restoring the older version from titanium backup, but got the same message about needing to install the update,& updated app gave same error message. Cruising around netflix.com website wasn't useful, my device (nc) hadn't been ' deactivated' as far as I could tell.
Side loading the netflix app didn't work. After I reloaded the old app ( titanium) a few times, & updated & rebooted a few times, i started getting stuff to play sound, but no picture. Then I discovered it will work perfectly after a reboot, but only for the very first thing you pick! After that it's just sound again, & i have to reboot again to watch something else!
Anybody else having a netflix issue?
[Solved] Netflix weirdness
It appears there is a new client version. 1.2.1 build 843839-1.2.0-30
I copied the apk from my Incredible (one of the supported phones),
and used Titanium Backup to uninstall, and Root Explorer to install
new apk. The new file is a little bigger, I guess it adds new supported
phones. The apk has the same file name but is a different file.
That fixed it for me.
I attached the apk (taken from my Incredible).
Interesting.....
I had the modified .apk which didn't need a prop.build change.
Of course, it died last night like the above threads state.
Wouldn't let me update it either as everytime I tried to install, it would error out...
But, I went an uninstalled the program (first deleteing cache) then found the program in the market and it installed with no problem....
It runs fine... no chipmunks.... nada....
Lucky I guess.... Running CM7 off the emmc on an overclock of 1200.
Lego
Legobricke said:
Interesting.....
I had the modified .apk which didn't need a prop.build change.
Of course, it died last night like the above threads state.
Wouldn't let me update it either as everytime I tried to install, it would error out...
But, I went an uninstalled the program (first deleteing cache) then found the program in the market and it installed with no problem....
It runs fine... no chipmunks.... nada....
Lucky I guess.... Running CM7 off the emmc on an overclock of 1200.
Lego
Click to expand...
Click to collapse
Woops, hit the thanks by accident I was trying to quote your post. So you didn't modify your build.prop and the updated client works without chipmunk voices? I'm running .32 CM7 after a restore to stock (was having issue with a later nightly) and when I downloaded the updated Netflix app it still gave me chipmunk voices until I edited build.prop again.
Are you running 7.0.x stable or one of the newer (.32) nightlies?
I am using CM7.0.3 - encore stable.
I also am using the ext4-CM7-dalingrin-OC-emmc-042411 overclock set to 1200.
These are running from the internal. Not an SD card.
I have had zero issues with netflix.
The stable (and the .29 kernel nightlies) have no problems running Netflix now that device check has been disabled.
It's only the .32 installs (later nightlies and beta1) that have the chipmunk voice regardless of what Netflix client is used (and thus needs the build.prop mod)
Just to add to the conversation. The Netflix Market Update worked perfectly fine for me.
Nook 1.2.1, rooted.
fuzzynco said:
It appears there is a new client version. 1.2.1 build 843839-1.2.0-30
I copied the apk from my Incredible (one of the supported phones),
and used Titanium Backup to uninstall, and Root Explorer to install
new apk. The new file is a little bigger, I guess it adds new supported
phones. The apk has the same file name but is a different file.
That fixed it for me.
I attached the apk (taken from my Incredible).
Click to expand...
Click to collapse
Also running SD card Nookie Froyo 0.6.8, but I'm still getting the chipmunk effect with this APK :/
Worked for me on 2 versions of NF.
I did have to do the build.prop fix though.
I used HTC Vision.
This worked perfectly... Thanks so much!!!
fuzzynco said:
It appears there is a new client version. 1.2.1 build 843839-1.2.0-30
I copied the apk from my Incredible (one of the supported phones),
and used Titanium Backup to uninstall, and Root Explorer to install
new apk. The new file is a little bigger, I guess it adds new supported
phones. The apk has the same file name but is a different file.
That fixed it for me.
I attached the apk (taken from my Incredible).
Click to expand...
Click to collapse
Thanks that worked for me.
I just updated to CM7 Nightly #93 via ROM Manager yesterday.
The only thing I had to do was update build.prop with the HTC Vision information to get it working again.
Rocking...
Edit: Just updated to #94 via ROM Manager, updated build.prop again, rebooted, and still working.
NOTE: I updated to most current version of CWM using ROM manager prior to CM7 update as well...
running rooted 1.2 with dalingrin's OC kernel --> was able to install and run netflix from market but had the chipmunk / fast forward feature... changed my build.prop with the HTC/Vision mod and all works great.
FYI, I was able to copy the latest apk from my Nexus One to the Nook Color, and Netflix is working again.
Can't get Netflix to work after update
I am at a total loss what to do. I updated my netflix app like it asked me to but now it lets me put my login info in (all red screen) and then I hang where it is a white screen with Netflix in a red bar at the top of my nook color. It never goes any farther than that and it used to work for me great before the update and I am doing the Vision HTC build prop thing and I have tried clearing data. Any thoughts. Thanks
bhaycraft said:
I am at a total loss what to do. I updated my netflix app like it asked me to but now it lets me put my login info in (all red screen) and then I hang where it is a white screen with Netflix in a red bar at the top of my nook color. It never goes any farther than that and it used to work for me great before the update and I am doing the Vision HTC build prop thing and I have tried clearing data. Any thoughts. Thanks
Click to expand...
Click to collapse
Exact same thing just happened to me. But I actually got it to work after the update. Then today it suddenly started giving me the white screen with Netflix at the top. Arggg.
Ditto for me on my ManualRooted Nook; however, Netflix still works from my SD-based CM7. What are you guys running on?
What I am running
I am running on Manual nootered latest 4.5.25 and I am running the OC kernel from Dalingrin.
I have exactly the same problem. Running the same combo.
So far I've uninstalled, and re-installed, cleared dalvik cache, but nothing has made a difference.
Working one day, then broken.
I have been putting off on installing 7.1.0.rc1 update for fear of messing up what is currently runnning ok.
I just got a notification on the bottom bar from Rom Manager that the new CM7 is available and if I would like to update to the lastest version. I may be mistaken but I remember reading some posts here from people who have gone this route and screwed up their CM7 to the point of having to reinstall from scratch. So the question is: Is it safe to update from Rom Manager or is it better to do the copy the new CM7 zip to /boot and reboot into recovery mode?
I downloaded it from the developer site, booted into recovery, wiped and installed it then installed kernel 6/30. Running at 1200mhz interactiveX/ quadrant 2969 / nenamark 23.5 / neocore 29.5
TMI?
Sent from my NookColor using XDA Premium App
Imbroglio said:
I have been putting off on installing 7.1.0.rc1 update for fear of messing up what is currently runnning ok.
I just got a notification on the bottom bar from Rom Manager that the new CM7 is available and if I would like to update to the lastest version. I may be mistaken but I remember reading some posts here from people who have gone this route and screwed up their CM7 to the point of having to reinstall from scratch. So the question is: Is it safe to update from Rom Manager or is it better to do the copy the new CM7 zip to /boot and reboot into recovery mode?
Click to expand...
Click to collapse
Depends on whether you are running CM7 from the sdcard or emmc. You can't use Rom Manager for much of anything if you're running off the sd. I'm running off the sd, so I can't tell you anything more, but there's a lot of information on this forum about RM if you search for it.
shumash said:
Depends on whether you are running CM7 from the sdcard or emmc. You can't use Rom Manager for much of anything if you're running off the sd. I'm running off the sd, so I can't tell you anything more, but there's a lot of information on this forum about RM if you search for it.
Click to expand...
Click to collapse
Ya, I forgot to add that I am running off of SD also. I guess that answers my question.
Hi all.
I'm sorry first of all on creating a new thread as I'm not allowed to add to dev posts.
I have created Custom MTD Partitions of : 140, 5
using CyanogenMod 7 Nightly: 220
(New Market)
I have tried to download a game third blade and i get an error of insufficient space
like ''Hanakie'' in this thread: http://forum.xda-developers.com/showthread.php?t=1233340
I have downgraded the market now to an old one and now able to download this game.
I am going to try tonight to upgrade the market from old to new but not a fresh install of a rom and see if if Im still able to. I will post my findings when done.
ps I would like to thank all the Developers here for for making my phone awesome and interesting til my next upgrade and then will have 2 phones to tinker with.
5mb cache is too low i had the same problem
edit: cm7 should move cache files to data/local if they are larger but this dont work for me i got the low memory message
Only problem I had with 5mb cache was in clockwork recovery, I always got an error as there wasn't enough space for it to write a log.
Sent from my HTC Wildfire using xda premium
I have tried these MTD Partitions: 140,5 140,10 140,20 140,25 and 140,35 with same results.
Im currently running at 145,45 as i know works great, but would like to see if i can get a little more space.
I like to try everything on here lol i love beta testing.
Hi apollo, can you please clarify whether you are using any sort of Apps2SD stuff? (Except for the built in one in CM)
my custom part is 110 15 with latest cm nite
boroboy69r said:
my custom part is 110 15 with latest cm nite
Click to expand...
Click to collapse
You were able to fit the latest CM Nightly on a 110MB /system partition? Did you go for a barebones build? AFAIK, the standard CM will not fit on a 110MB system partition. (Unless of course, it is stripped)
its not bearbone as such ujst took out all ringtones, all but on each alarm tone and notification tone and removed some of the not needed apps from the rom like email, music player (got power amp), cm wallpapers, live wallpapers u get the picture
hi 3xeno (thank you for your hard work)
I'm not using any Apps2SD any more as wanted all my stuff on internal memory.
i did a
1. wipe/factory reset
2. MTD Partitions Guide but instead of restoring from backup i did a fresh flash of
cm7 nightly 220
3. Then flashed gapps-gb-20110828 for Market
apollopayne said:
hi 3xeno (thank you for your hard work)
I'm not using any Apps2SD any more as wanted all my stuff on internal memory.
i did a
1. wipe/factory reset
2. MTD Partitions Guide but instead of restoring from backup i did a fresh flash of
cm7 nightly 220
3. Then flashed gapps-gb-20110828 for Market
Click to expand...
Click to collapse
Did u flashed bravo boot after all these steps?
Is anyone except me able to run 5mb cache without market and recovery errors?
Sent from my HTC Wildfire using xda premium
I had it running with the market fine, just got a can't write a log error in recovery if my cache was full. Recovery still worked fine manually but wouldn't do the auto backups from rom manager etc etc....
Sent from my HTC Wildfire using xda premium
zexcrazy said:
Did u flashed bravo boot after all these steps?
Is anyone except me able to run 5mb cache without market and recovery errors?
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
yes i did. going to try again tomorrow see if anything is different
I'm running cm7 from micro sd on my nook color and love it, but i hate the market app. On my rooted htc inspire i was able to download the old market apk for version 2.3.4 and much prefer that one. It's the one with the big green box at the top. Is it possible to modify my rom when it's running from the sd? If so, how would i modify it to run the old market app? I've read some threads about going back to the old market, but it wasn't THIS old market and it wasn't with cm7 on sd. Thanks!
When I was running CM7, I used AppQuarrantine to freeze "Market Updater" and uninstalled the Market update. That left me with the old market version. That was on sd. hth
Sent from my CM9 NookColor using Tapatalk
Yep, Macahs right. That works. You can also do the same thing with Titanium BU. And, FWIW, I found a perfectly usable Market 2.x apk online through a Google search, if your uninstall of the new Market doesn't reinstate the earlier one.
I'm running 10.2.1-encore and gapps 20130813. I'm trying to use the auto updater to update to version 11 however when I do it says theres no gapp installer. I'm installing (rather trying to)to a 2gb sd card in my nook. I have no clue how to update to version 11. I've looked on here, and one guide in particular seemed helpful. It actually helped me install the current version I'm using but the auto-updater won't install 11. Apparently I'm to dumb to figure this out, could someone help me get 11 on my nook color and the new google apps version?
cgamer76 said:
I'm running 10.2.1-encore and gapps 20130813. I'm trying to use the auto updater to update to version 11 however when I do it says theres no gapp installer. I'm installing (rather trying to)to a 2gb sd card in my nook. I have no clue how to update to version 11. I've looked on here, and one guide in particular seemed helpful. It actually helped me install the current version I'm using but the auto-updater won't install 11. Apparently I'm to dumb to figure this out, could someone help me get 11 on my nook color and the new google apps version?
Click to expand...
Click to collapse
You cannot autoupdate to CM11. CM11 requires entirely different CWM, rom and gapps.
Sent from my BN NookHD+ using XDA Premium HD app
Yea I kinda figured I couldnt use the auto update but how can I can about removing 10 from my sdcard and updating it to 11?
cgamer76 said:
Yea I kinda figured I couldnt use the auto update but how can I can about removing 10 from my sdcard and updating it to 11?
Click to expand...
Click to collapse
Start over by putting the newest image (rev8c) on an SD. It is required by CM11. But that image also requires at least a 4GB SD. If you want to save your apps and settings, use Titanium Backup.
Sent from my BN NookHD+ using XDA Premium HD app