Database Users

Is this HD2 screwed?

Okay guys, am I screwed?
I tried putting android on this HD2.
I successfully installed HSPL 2.08 HSPL (So NO 2.08.0000)
Then I tried installing MAGLDR 1.13, just by executing the ROMUtilityUpdater.exe.
Clicked the first checkbox, then the 2nd, and then that 'Update' thingy.
It was going to updating from 1.72.XXXXX to 2.00.0.000 (or something)
I had it connected through Activesync (WinXP).
It was ready in 30seconds, instead of the normal 10 minutes.
Now it just hangs on the White HTC bootscreen.
I tried doing a Task29, but in the RGB Bootloader (USB connected) screen it won't connect to ActiveSync. I Ran it anyway, but still no Windows or MAGLDR.
Do I need to install a different Radio? If so how do I do that and where can I find it?
I am downloading a stock WinMo 6.5 Rom (vodafone branded, from HTC.com)
Thanks for all the help in advance!

had simillar problem. I would just install the latest Windows ROM 3.03 but thru SD card (Download official 3.03 ROM for Your phone, extract it, change the nbh file name to LEOIMG, put it on Your SD card, Switch the phone on holding volume button down, and then go with the instructions on the screen) cuz it changes Your SPL, then install HSPL 4. After that install CLK and CLOCKWORK and then NAND Your device with clk version android.
Look here http://forum.xda-developers.com/showthread.php?t=1021837 if You dont know how to install clK. It is a bit complicated but if You are a bit computer literate You should be ok.

Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place

wouternet said:
Okay, thanks!
I installed a stock vodafone rom, it is booting now!
so where do i find 2.15 pesky radio 2.15 rom?
I installed HSPL using HSPL in the first place
Click to expand...
Click to collapse
Hi,
Go HERE

Stock ROMS always save the day haha

Thanks brother

All HTC phones have tiny screws which helps the body stay together. So yes every HTC phone is Screwed

[Q] No Bootloader Menu after reboot

Hi folks,
I tried to flash my HTC HD2 for the first time. Read /watched different guides. In first 2 steps they were all the same:
- install HSPL
- instal MAGLDR
Done both, got positive responses on both.
BUT: after rebooting after installing MAGLDR I do not manage to get the bootloader screen. There´s just a white screen with green htc logo on it and nothing else happens.
Yes, I held the power button after reboot; about 1 min long. Nothing.
If I hold volume down button after reboot the stripey screen appears like after the HSPL installation. But there is also no menu.
Also tried to proceeed task29 with the HD2 Android NAND Toolkit. Got positive response there too and after this I begann from scratch. With the same results.
Does anyone have a clue what I made wrong or forgot?
Or a hint what to do now?
best regards
M.

What version hspl n magldr?
Sent from my LG-P999 using XDA App

and radio,
hspl MUST be 2.08.hspl ONLY
radio MUST be 2.xx.50.xx

Got hspl version 2.08.hspl from http://forum.xda-developers.com/showthread.php?t=611433
got MAGLDR version 1.13 from http://forum.xda-developers.com/showthread.php?t=893618
cant remember the full radio version but I checked it before starting and it fits to requirements.
But I´m a few steps forward...
Meanwhile I flashed the newest Original HTC HD Win Mobile 6.5 ROM so phone boots up again
After that I installed HSPL version 2.08.0000 (now I know that was a failure) an tried again to install MAGLDR. But the progress bar doesn´t move - neither on PC nor on phone...
So I first will try to install again HSPL like samsamuel said and try again with MAGLDR
[EDIT]
Radio Version is now 2.15.50.14

SOLVED
Don´t know why but after dooing all step again (after falshing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other

MiMo99 said:
Don´t know why but after dooing all step again (after flashing new HTC ROM) all ist ok and android is booting...
I think something was not in expected version on my old ROM on the phone. Never made an update before. So I recommend to do this before starting with all other
Click to expand...
Click to collapse
the only regular hd2 stock rom that includes a magldr compatible radio is 3.14, so if the ''old rom'' you flashed was any other version, it will have also flashed a non magldr radio, which is why it happened. (I suspect).
Sorted now,

the same problem
Hi,
I have the same problem.
Just white screen with green HTC mark.
But I'm not shure how to flesh win mobile again, because I cannot connect my HTC HD2 via USB (PC doesn't recognise the phone).
tnx

Hey MiMo,
Could you please post links and steps to help myself and anyone else looking on how to fix this?
by links I mean can I have the stock rom you used and the radios and such
Thank you.

[Q] HTC HD2 bricked, can load bootloader cant install any ROM

HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.

to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....

thanks for quick reply
I am trying to do what you instructed me.

Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.

I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.

Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium

The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...

leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!

freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills

Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks

First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse

If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1

ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...

Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.

I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?

[Q] Problems to flash clK or magldr to HD2

Hello everybody,
I started a thread in the German handy-faq.de forum about flashing my htc hd2 (512LEO) with android.
While they can’t help me, a forum Member told me to ask the xda-Dev.
So here am i and i hope you can help me.
At first, please pardon my mistakes in the English language, it’s a long time ago since I learned it at school
Now my Problem:
My HTC HD2 was repaired by manufacture one year ago. The Smartphone got a new Motherboard with the actual Software (HTC ROM 3.14.407.2(04666) GER, Radio 2.15.50.14…)
The original ROM WM6.5 was/is running without faults.
After reading in many forums about changing the Software I tried to put Android on my HD2.
At first I “opened” the HD2 with HSPL4 and changed the SPL3.03 to HSPL2.08.
After this was successfully done also Task 29 “worked”… I tried to flash clK1.5…the PC said: “done” but after reboot the HD2 stopped with a white screen and green htc letters.
There was no hboot! From booting with pressed “Back” or “Home” Button the same: no menu.
I tried it again several times also with clK 1.4 and magldr (after Task29) the same problem.
Back to WM6.5 via SD Card was no Problem so the HD2 works fine at this time.
What can I do to get Android on my Handy?
Is it possible, that some HD2 didn’t work with clK or magldr?
Is something wrong in "my way" of flashing?
Many thanks
123kb

some older versions of task29 use a radio as the .nbh, so its possible you removed the required radio.
i would.....
forget about task29, its not necessary.
enter bootloader
confirm spl says 2.08.hspl and NOT 2.08.0000
flash 2.15.50 radio
back into bootloader
flash magldr (because it should come up automatically when the phone restarts, without requiring you to press anything, making it easier to tell its worked)
report back.

Thanks for your answer.
I did this yesterday, after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc.
The HD2 shows 2.08 HSPL after booting with L- Button pressed so it shut be "open".
That´s the problem, i can´t get into the Loader Menu.
All the same clK or magldr.

123kb said:
after installing magldr and auto boot the HD2 shows no Menu, only white screen and htc
Click to expand...
Click to collapse
only three reasons that magldr wouldnt show up...
1 - wrong radio - must be 2.xx.50 where xx is 07 or higher (2.15.50 keeps it simple)
2 - wrong hspl - must be 2.08.hspl
3 - faulty hardware.

...are you sure that there are only these 3 reasons?
Radio is 2.15.50.14,HSPL is right 2.08.HSPL and i can´t believe that the Hardware is faulty because Windows Mobile "Backflash" and the Phone is running without any fault.
I will download the Soft again (maybe i loaded "broken" Soft) and try to flash again (without task29 as you wrote)
I´ll be back in some minutes...

...soft download from xda...HSPL 2.08 installed,Radio from orig.ROM 2.15.50.14, with HD2 Toolkit 4.2.0.1 magldr installed...the same as I wrote...no Menu
any idea

Try a different version of MAGLDR/cLK. Your motherboard was replaced, and I have seen so many people with replaced motherboards having problems. It could be like what sam said, a hardware fault. (Technically for HTC, it isn't a hardware fault as long as it doesn't affect the phone's functionality under Windows Mobile)

there have been cases where winmo flashes and works fine, yet other things don't, perhaps magldr starts, but then always hangs at gogogo, or gives 1e fatal hit, , and the dreaded stuck radio has many variants, ranging from being fixable by flashing using the freezer trick, all the way through to nothing at all working ever, , so i could well believe there is a case where winmo would work but nothing else would.
why not try clk again? i believe there is a version of clk that can be flashed from sd card, , might take better than the usb version?

...I tried different Versions of magldr, clK 1.4 and clK1.5 allways the same Problem.
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
it seems, that my HD2 only run WM6.5 and before "Murphy" comes and I flash my Phone in a "Paperweight" I stay on using WM6.5.
Thanks for the help.
Have a good time

123kb said:
I can´t find clK Version to flash from SD. If you got it, send me a link and I try it.
Click to expand...
Click to collapse
http://www.mediafire.com/?624yf6cs03buk6f
Copy the .nbh file to a clean SD Card (make sure the SD Card is not too big - a less than 2GB card is sure shot), power up the phone with the vol down key pressed. All the best!

hello ph03n!x,
thanks for the link, I downloaded the file and put the leoimg.nbh to the same 2GB SD Card I used to flash back to WM6.5.
The Phone "said" succesfull done but after reboot, white screen and htc letters.
It will not run on my Phone...ok, back to WM65 again.
Thanks a lot,it was worth a try....I will try it again if there is any way...maybe in the future it is possible )

Hi,
if WinMob6.5 is runing, you can boot Android over WinMob... you only need a right partition on SD-card (see NativSD-thread see: http://forum.xda-developers.com/showthread.php?p=31110691 ) , then install Android in the partition (rom-name must have NativeSD in thread-title like the pacman-rom http://forum.xda-developers.com/showthread.php?p=32721010 ), boot WinMob and start Android via clrcad + haret (or with my "one-click-tool" see: http://forum.xda-developers.com/showthread.php?p=33174747 ) ...
See the Wiki under WinMobile Installation
http://forum.xda-developers.com/wiki/HTC_HD2/NativeSD
(great thanks to Szczepanik for the Wiki)... it looks complicated, but it's realy simple...
My pacman-rom runs great... (thanks XYLO)
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app

hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.

123kb said:
hello o82239,
I try to use your tip, unfortunately without any success,
after starting haret.exe and booting the HD2 shows 6 or 7 lines in very small letters and hang on this screen.
Click to expand...
Click to collapse
Hi,
I think, you should try it all again with a clean SD-card (you can clean all SD-card-partitions under Win7 with "diskpart" or under Linux with fdisk or other tools)... and post all your steps... we can take a look, if you have forgot one step or if you do something wrong...
Cheers
Klaus
Sent from my HTC HD2 using xda app-developers app

just follow the clk install you didn't add driver for your dev.So I think you just follow the step .1.task29 2.flash radio 3.flash clk 4.add driver then reboot with holding on your home button into recovery screen.And can you show us what your screen looks when you in HSPL sreen.
Sent from my HTC HD2 using xda app-developers app

hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.

123kb said:
hello and thanks for your answers.
at first for o82239, I tried three different sd cards all are running perfect with WM6.5 (sandisk 32gb class 10, sandisk 8gb class 2,Medion 16gb class 4) formatet with "sdformater", and one partition FAT32 and the second EXT4 with mini tool partition wizard.
for wxl104 the problem is that i can´t get after point 3...clK is successfull installed,shows the pc but the HD2 shows after reboot white screen with green htc logo.
so the main question is:
why did the hd2 hang after rebooting on both "softwaresystems" (sd or nand installation)
i´m shure that i did both installs (many times) the way the "howto" is written or the install guide shows.
Click to expand...
Click to collapse
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.

wxl104 said:
I can't be sure if you have done anything wrong.but just follow the right step,you can't go to CLK or MAGLDR menue.It mean you have done something wrong.you can install w6.5,so the phone driver is ok.But if you use the htc official rom.you can try to re-unclock your phone.And use hspl-2.08 .If also can't you drop your flashing tool,and redown it again.And then follow the right step,which you can serch it though this forum.
Click to expand...
Click to collapse
1 flash hspl , 2 flash magdlr ,3 boot holding down power button , 4, select usb flash ,5 flash clockwork ,6 flash rom ! that's how i always do it no need to task29

[Q] HD2 stuck at green HTC logo...tried everything

Hi, i ve read almost all topics here about the subject. this is what i've done so far:
i've succesfully installed
-hspl
-Radio Leo 2.15.50.14
-task29
-then MAGLDR111
then i was going to install an android nand version i found on the internet but my HTC got stuck on the green HTC logo screen.
i never get the bootloder menu. this is my problem.
Yes, I have leoimg.nbh in the root of my SD
After i put it there, i got an menu after reboot saying
'radio_v2
rcust
bootloader
splash1..'
press power to update...
but since this leoimg.nbh is my original windows image, it updates back to wm6.5
So anyone can help me how to pass this green screen please ?

try the links below, they might help

mengfei said:
try the links below, they might help
Click to expand...
Click to collapse
well it is just the shortcuts of what i've done already
i will probably wont be able to see the bootloader menu again..but thanks for the response

mmaniac said:
well it is just the shortcuts of what i've done already
i will probably wont be able to see the bootloader menu again..but thanks for the response
Click to expand...
Click to collapse
He says that to everyone, anyway.
First of all, not any HSPL will work. You need HSPL 2.08 for MAGLDR.
Second thing is, I suggest you use MAGLDR 1.13 (I still don't understand why people use the old, when there is a new)
Don't do Task29, it is useless. And now since you've installed winmo through sd card, you need to re-install HSPL (2.08), after that install MAGLDR (1.13).