Yesterday I tried to install the official motorola GB in Froyo but in the way my computer was not enough space to complete the download and installation, after that, he was appearing on a screen with the message "code corrupt", tried to use rsd lite to go back to 2.2 and then update again, but the screen is all black and only the light illuminates the usb. Would anyone know give me a hand?
PS: When i used the rsd lite, during the process apears on screen sw update, or something like that, but, when finishes with "Finished / Pass" it's all black =/
Thanks in advance
Sorry about my english.
download again SFB of GB...
what version of RSD are you using ?
I advise you use this:
RSD Lite 5.6
try flash again...
VooDooKill said:
download again SFB of GB...
what version of RSD are you using ?
I advise you use this:
RSD Lite 5.6
try flash again...
Click to expand...
Click to collapse
Worked fine! Thanks!!
I was using cm10 2nd boot builds 18.10.. then i installed multiboot and my phone was not booting after moto symbol.. so i flashed india froyo sbf.. then it started to get bootloop in android bootscreen.. after tht i flashed china sbf but tht also got bootloop in bootscreen so i went bck to india froyo sbf and rsd lite showed finished.. then my phone stopped booting.. but rsd lite can detect when put on the comp.. Plz help!!
Please do a little searching before creating new threads. Virtually everything you need to know is right here: Is your DEFY/DEFY+ bricked??.
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
krushnam said:
Reflash another SBF... did you try flashing an éclair sbf by mistake?
What was your BL?
Try one of the BL5 froyo sbfs... Nordic seems to be rather popular... check the BL version before you flash, try out BL 5, but I'd suggest you think twice and ask for more help before flashing a BL6 sbf.
Click to expand...
Click to collapse
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
TheFr1tZ said:
The problem is when i conect it to the pc it doesent turn on , and the RSD Lite doesent see it ( and i dont know another way to reflash it (
And the BL is 9.10
Click to expand...
Click to collapse
Ya BL is 9.10 for all, bit there's (sub) versions of it like CG4 ,CG5 CG6 & CG7. So most people just say BL6 BL7 etc. That's what I meant.
CG Version 2: SBF 2.21 / 2.34 /
Chinese (Éclair) (Defy)
CG Version 3: SBF 2.51 (Éclair) (Defy)
CG Version 4: SBF 3.4.2 (Froyo) (Defy)
CG Version 5: SBF 4.5.0 / 4.5.1
(Gingerbread) (Defy)
CG Version 6: SBF 4.5.1 (Gingerbread,
2.3.6, (Red lens Defy/Defy+) )
CG Version 7: SBF 4.5.1 (Latests
Gingerbreads, 2.3.6, (Red lens Defy/
Defy+) )
If you try to flash a lower ID version
than the one already on your phone, you
will just get a Black screen after booting
or a screen telling you to flash an
official rom.
So, with this in mind, you can now hop
between Android versions without
screwing up your phone.
This thread explains everything: http://forum.xda-developers.com/showthread.php?t=1216982
Use an external charger or another phone to fully charge your battery and then plug it in and RSDLite will detect it.
My Defy is not turnng on
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Same situation
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Hi, I am in a similar situation that my defy wont boot up (no screen activity) after I flashed the official Froyo ( Ver 4). The problem is that i bought it second hand and some miui rom (gingerbread) was installed in it with second init active with prerooted. I wanted official Froyo, dont know what was the highest version installed in it. Later tried to install the Nordic Froyo SBF, it didn't help either.
I have another defy on the same miui built (which is working normally and used for charging the dead defys battery), dont know what to do with the soft-bricked one. Which sbf to flash to make it work again.
jayanth1255 said:
My Defy not turning on after flashing SBF, It only showing white led light when i connected usb to system I dint find solution anywhere. I pressed power Vol+, power vol - no display no led. Please help me..
Same problem here please help me.
Click to expand...
Click to collapse
exactly the same situation here. Someone pls come up with a solution I don't want to believe that the phone is now useless by a software problem there must be a solution
Have you tried charging through external battery charger or the mcgyver method?
Sent from my Nexus 7 using Tapatalk
Flashing a bl6 sbf helped out. The sbf I used was dfp-125. Made my defy into defy plus though and only after that it booted. Can root and install secondinit on it for further flashing. Once you get to the red motor logo after flashing, you might have to wipe data cache from stock recovery.
Hope this helps.
Sent from my MB525 using xda app-developers app
Charging problem
TheFr1tZ said:
So, i updated the software a few weeks ago from 2.2.2 to 4.1.1 , all went well , it was a complete succes. Today i wanted to go back to 2.2.2 . I downloaded RSD Lite 4.9 and a SBF file, I entered Bootloader menu and tryed to downgrade , but i got some errors and the phone got stuck in bootloader menu . I thought it was from the SBF , and i tryed another file and the update failed and the phone shut down . And now i dont know what to do , i'm kind of desperate . And when i plug it in the PC the white LED turns on , when it is charging in the wallcharger the LED doesent turn on . I tryed different ways to turn it on ... and with no luck.
Does anyone have any ideeas ??
Click to expand...
Click to collapse
Make a downgrade on defy results: Brick your device!
1st attempt: Plug in the PC and wait a green led (means your battery it´s above 80% charged)... Be patient!!!
2nd attempt: You must to have/do one "factory cable"(searchable in CM´s foruns) to charge the battery. To be recognized by the RSD Lite you need to keep the "factory cable" to do a downgrade.
A link that helps: http://forum.xda-developers.com/showthread.php?t=2500789
ibtihaaz said:
HI there Jayant ... i am in a situation like yours ....
my defy will not turn on ... battery is ok ... i have 2 batteries and its not turning on at all ... no led lights up .. no screen is on ...
wanted to know how did you managed to sort out your problem
please help me if you can
Click to expand...
Click to collapse
Same situation...
No solution found?
Ok..
A few weeks ago I ''bricked'' my phone when I tried to flash a sbf, hoping to get the phone a higher/better OS than motoBLUR. But it went really wrong, I couldnt start my phone after flashing succesfully.. Later on I kinda came to the conclusion that I flashed the wrong sbf. Since my phone is a me525 and I used a file for mb525. What the result was that my phone turned black and it was showing a white led when charged in the pc. I have searched for quite a while for a sbf. that suits my phone to flash it again. So if there is a kind person who could help me I would be very grateful!
p.s. I'm new into all this developing with OS' and stuff..
Same issue!
Tungieee said:
Ok..
A few weeks ago I ''bricked'' my phone when I tried to flash a sbf, hoping to get the phone a higher/better OS than motoBLUR. But it went really wrong, I couldnt start my phone after flashing succesfully.. Later on I kinda came to the conclusion that I flashed the wrong sbf. Since my phone is a me525 and I used a file for mb525. What the result was that my phone turned black and it was showing a white led when charged in the pc. I have searched for quite a while for a sbf. that suits my phone to flash it again. So if there is a kind person who could help me I would be very grateful!
p.s. I'm new into all this developing with OS' and stuff..
Click to expand...
Click to collapse
Hey..! im on the same problem..cant get my phone to boot up normally ..but the computer still detect the phone even if its black screen well hope we get help..i need my phone back ..
I know just a couples of days ago that you have encountered "soft" or "fake brick": just go to bootloader mode as usual and try flash a new SBF. It is in boot loader, just no screen display.
in some point i make mistake....
1) I have motorla defy in android version 2.1 after RSD LITE JORDN_U3_97.21.51.sbf
in this version of android i can't install anny recovery like 2SndInitDefy (is green led), but after reboot is black screen with logo motorola (no blue led) only help RSD LITE JORDN_U3_97.21.51.sbf .
2) i thing i need update to android 2.2 and install 2SndInitDefy, but i don't know how.....from phone update is not working...i tried RSD LITE with JRDNEM_U3_3.4.2_179-6_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYOTMPL_P022_A018_M007_HWp3_Service1FF.sbf
but is only black
what can i do how to update to 2.2 ??
after i want instal 2SndInitDefy and custom rom i spend about 7h and now i ask