Related
Hello.
I want to change/upgrade my ROM to WM6. But I want to make a Backup of my existing from first (maybe I'm to stupid to do the Update) and to have the chance to get my MDA Vario back to life I want to make a backup of the ROM is installed at this time.
Could somebody maybe tell me how i can backup my ROM? And... How can I reinstall the ROM? I think it will be moved to the SD Card?
Thanks a lot.
You might want to try this then first:
http://forum.xda-developers.com/showthread.php?t=305294
Thanks for this.
May problem is that I have a "very" new ROM installed (T-Mobile MDA Vario 2.21.2.8 GER). and I'm unable to complete the the CID unlock process (the Netlock is removed allready with the lokiwiz 3a.).
If I'm entering the Bootloader and open mtty I'm .not able to open the USB port.
Does it mean I need to downgrade?
Thanks Maik
There is a newer public T-Mobile ROM on the T-Mobile website: Version 2.26.2
You need to downgrade your ROM to custom 1.05 (check the WIKI page) in order to run lokwiz CID unlocker!
I tried the version 3 of lokwiz but the only one which worked properly on my MDA was the version .2b
How ever,
the CID lock should not effect the MTTY utility. This is an official HTC procedure and should work on any WIZ.
UPDATE:
I just saw that you're talking about a german ROM? The latest public german ROM is 3.3.8 (check the german T-Mobile site for that!). If you want to keep the older 2.21 you can find it at the Austrian T-Mobile site again after downgrading and unlocking your CID
I am running the german rom AKU3.3 myself - it is much nicier than previous versions and has already some WM6 features integrated.
Ok. So I need to downgrade my Device. to do the CID unlock.
Maybe the system firewall and some other settings are affecting the MTTY issue.
I checked the T-Mobile website for the newer German ROM version.
If I check https://after-sales-service.t-mobile.de/eg_online/t-mobile/t_mda_vario.htm (what my Device is) I only see the 2.21 version and NO newer version?
1.
Go to www.t-mobile.de
2.
Click on top on the menu "HILFE & FAQ"
3.
Select on that site "Broschüren & Software"
4.
Now click on the left site menu on "T-Mobile Software"
5.
It takes you to a new page and asks you for your MDA. Don't worry if your PDA is not in the list! Just choose any PDA. It will take you to a new page and show you the selected PDA. Right underneath you will see a link: "Model aendern" - click on that link and then chose as Manufacturer T-Mobile and you will find the MDA VARIO!
Sorry for being so complicate but the T-Mobile site is set up with Flash, so, you can't just copy the link! You always have to go the loooong way! Be aware that you have to temporarely allow popup's ... !
How ever,
I will try to paste the link here to the direct download and I hope it works:
http://www.t-mobile.de/downloads/t-mobile/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
Hey the link works....
Thanks. I find out that my Device is a G4 device and I also see that I can't unCID this device... Right?
I'm a little bit in fear that something is going wrong during the Update to WM6 and I have no working Backup on my SD card.
Ok. So this steps I will do. Maybe you can currect me if I'm wrong.
1. I will perform a downgrade to the custom rom 1.05 and then I make a backup after running CID unlock.
2. I make a Backup with the MTTY
3. I will install the WM6
4. If not working I can backup from SD card and maybe install the newest ROM
You only should downgrade for CID unlocking your device! This is required for installing other ROMs than from your cell phone provider!
If you want to upgrade to the new german AKU3.3 from T-Mobile - that should work without CID unlock! You also should be able to downgrade to your existing ROM version in case you just dislike the new AKU3.3
BTW:
If you're planning to upgrade to a selfmade WM6 which you can find all over the web: I tried almost all of them! None was as stabile and good as the german T-Mobile AKU3.3! Sure, they look cute with their VISTA-style look but the functionality is far away from being perfect! Also: Lots of the ROMs are very user-personalized and contain no configuration for your network (such as GPRS and MMS) - my advice: stick to your provider ROMs, either AKU2 (which you're currently running) or the newer AKU3.3 from the link above - at least until you learnt flashing and registry hacking on your device!
WOW I allready can hack the Registry but having sometimes some issues with instructions here . Like I say before... I'm a little bit in fear...
Well, it is understandable! Noone wants to end up with a brick!
There is always a risk in flashing devices! I do it since years now and was unlucky only once by flashing a SIM locked ROM to a Motorola phone. Haven't had any problems since then. The best thing is READING and if you can't find answers just post your question. Next to it is always helpful to check also other Forums or try to find guides in your own mother tongue!
Hacking the registry is not really riskfully - at leat the only one thing what can happen is that your device won't start up and you might lose your files and data. Other than that you should be able in any case to get it running with a hard reset again by holding CON button and Voice Dial button at the same time and press Reset.
Flashing can destroy the device because of it actually erases everything in the device; even the ROM before it writes the new one. But even here you will be able to enter in BOOTLOADER mode in most cases.
Yeah thats right Junner. Reading and asking... Since I flashed my SDA wrong I'm happy to have a Backup on the SD card to get the Image back. If this is the case I'm happy.
I installed AKU 3.3 and it's looking good and working fine.
Maybe I will downgrade to the custom 1.05 and do a backup. I only want to look how the WM6 is looking.
Are you German? Or german speeking?
The ROM backup to SD card via MTTY should work without CID unlocking your device! There is no need to downgrade for that purpose. I had hard times by doing it too. It took me several trials until it worked finally!
The downgrade is only necessary if you're planning to install ROMs from other providers or ROMs in other languages. I asume you're german, so, if you don't believe anything I say - this you can believe: the german AKU3.3 is the best out there you can find for the WIZ
Like I mentioned earlier: all the WM6 ROMs you will find all over the web are user created! They are either taken off from other devices and changed around until they worked on the WIZ or just visual pepped up AKU3.3 ROMs (the one you installed now). Allthough, I did not find any WM6 out ther which did not have issues in one way or another ...
I speak a little bit german , yeah!
We have WURSTFEST here once a year with lots of Sauerkraut and beer ...
Mates, if I read my rom am i going to be able to copy it to pc and Dump it with a ROM Kitchen?
Hello All,
I have Omnia 7 from Orange UK but it's without simlock and used in Poland (Plus GSM).
I have a few questions:
1. Which ROM should i choose to debrand my phone and get polish language?
2. Will this ROM allow me to download further WP7 Updates?
3. Do i have to unlock something more or can i just start operation with below progz:
- Samsung CDMA Modem driver v5.2
- WP7 Downloader
- ROM flasher
Polish language isn't necessary but would be nice to have it
Thanks in advance for your help.
Okay you need to carefully follow this guide to flash a debranded ROM and you can get Chevron/Interop unlock and Internet Sharing.
Then to get Polish language on the device you need to carefully follow this guide which will explain certain CAB files you need to send to the phone.
Just take it slow
pLUSpISTOL said:
Okay you need to carefully follow this guide to flash a debranded ROM and you can get Chevron/Interop unlock and Internet Sharing.
Then to get Polish language on the device you need to carefully follow this guide which will explain certain CAB files you need to send to the phone.
Just take it slow
Click to expand...
Click to collapse
pLUSpISTOL,
Thanks for help.
I think that i'll resign from changing language
If i don't wan't any unlock and internet sharing, should i follow only steps 1 and 2 from second guide?
I think i can use "The WindowBreak Project instead of Chevron to unlock phone, right?
Yes if you don't want to unlock then you just need to do steps 1 and 2.
WindowBreak might not work on the very latest version of Mango, you will need to read that thread to double check.
If you're daunted by all the steps in the guide you really needn't be. Once you start it isn't too difficult, neither is the language CAB guide
pLUSpISTOL said:
Yes if you don't want to unlock then you just need to do steps 1 and 2.
WindowBreak might not work on the very latest version of Mango, you will need to read that thread to double check.
If you're daunted by all the steps in the guide you really needn't be. Once you start it isn't too difficult, neither is the language CAB guide
Click to expand...
Click to collapse
Thanks for help
I just found solution how to change language to PL without any operations on CAB files Just need to go back to 7392 version and change something in regostry files. If it works. i'll translate this guide as i found it on polish site
Hello,
After reading a lot of posts, I still can't figure out if the Interop Unlock is kept while updating to the latest updates. I tried to downgrade to an "unlockable" version, unlocked, made the unlock "permanent" (via Registry edit) then update, but this didn't work.
I used the WindowBreak unlock, achieve to use it with older version, but when I updated, it wasn't unlocked anymore.
Did I do something bad ? Or did I misunderstand everything ?
Thank you.
Interop Unlock with WindowBreak stay after the official update KK2 via Zune but if you do a Hard Reset you can't unlock more
Downgrade to 7740 with Back Up..... Unlock using WindowBreak and then Update manually version OS 8107 with CAB
You must also update all languages pack on your Omnia 7
EDIT:This is in Official Post for Update Manually OS 8107 with CAB By Heathcliff74
"WARNING!! The new Samsung Onmia 7 KK2 update will prevent the use of Interop Unlock and WindowBreak! This Samsung Firmware update is accompanied with the 7.10.8107.79 if you update with Zune. Other Samsung devices are probably affected too, but I don't know if the update code for those device is KK2 too. If you are already unlocked, this update will not relock your device. If you want to keep the possibility of Interop Unlock open, then use the method described in this thread to update to 7.10.8107.79 without updating to Samsung KK2!"
no solution yet?
I just want to be sure that I'm not missing something... At this point in time there is no way around the fact that windowbreak does not work with the latest samsung update?
Roll back is the only option?
Blanketnam said:
I just want to be sure that I'm not missing something... At this point in time there is no way around the fact that windowbreak does not work with the latest samsung update?
Roll back is the only option?
Click to expand...
Click to collapse
If you have received Samsung Update KK2 don't unlock Omnia 7 with WindowBreak
If you unlock before Update KK2 unlock stay
If you do a Hard Reset after Update KK2 can't unlock with WindowBreak
Roll back at the moment is the only option
Osso17 said:
If you have received Samsung Update KK2 don't unlock Omnia 7 with WindowBreak
If you unlock before Update KK2 unlock stay
If you do a Hard Reset after Update KK2 can't unlock with WindowBreak
Roll back at the moment is the only option
Click to expand...
Click to collapse
Do you know if anyone is working on creating a new interop unlock? Otherwise I have to restore my phone to 22 Jan... thats a long time and many new apps ago...
Blanketnam said:
Do you know if anyone is working on creating a new interop unlock? Otherwise I have to restore my phone to 22 Jan... thats a long time and many new apps ago...
Click to expand...
Click to collapse
I don't know if anyone is working on creating a new Interop Unlock
Ok I rolled back. Realised that update doesnt do much important anyway.
Some of the homebew/bazaar apps still tell me my phone isnt fully unlocked though, like opera mobile.
What's the difference between interop and fully unlocked?
Sorry for stealing attention, but can anyone provide a link with instructions to how to roll back, or downgrade, manually, via magldr or somethink like that? Basically, that should be the same as putting a custom rom, right?
Also, all the links posted for previous firmwares are dead, is there a source where i could download a mint official 7740 or previous firmware? My Omnia has been bought in croatia. Should i only use the ROM for a specific region, or will any european rom do? I use my phone in english.
I can't do the zune roll back since i have to hard reset and change my liveID..
EDIT:
Is tis it? Is this how i flash an older firmware? If so, now I only need the ROM files..
d.a.v.o.r said:
Sorry for stealing attention, but can anyone provide a link with instructions to how to roll back, or downgrade, manually, via magldr or somethink like that? Basically, that should be the same as putting a custom rom, right?
Also, all the links posted for previous firmwares are dead, is there a source where i could download a mint official 7740 or previous firmware? My Omnia has been bought in croatia. Should i only use the ROM for a specific region, or will any european rom do? I use my phone in english.
I can't do the zune roll back since i have to hard reset and change my liveID..
EDIT:
Is tis it? Is this how i flash an older firmware? If so, now I only need the ROM files..
Click to expand...
Click to collapse
All I did was restore my phone using zune... under options, phone, update, then select restore.
Blanketnam said:
All I did was restore my phone using zune... under options, phone, update, then select restore.
Click to expand...
Click to collapse
So i do a restore via zune, and than hard reset and change liveID? That would work you think?
The reason I'm doing this is because croatia has been given access to marketplace and i need to change liveID, put the croatian one as the main one.
d.a.v.o.r said:
So i do a restore via zune, and than hard reset and change liveID? That would work you think?
The reason I'm doing this is because croatia has been given access to marketplace and i need to change liveID, put the croatian one as the main one.
Click to expand...
Click to collapse
Yeah I suppose. If you change to a live a ID with croatia set as the location it should change your store to the croatian one.
d.a.v.o.r said:
Sorry for stealing attention, but can anyone provide a link with instructions to how to roll back, or downgrade, manually, via magldr or somethink like that? Basically, that should be the same as putting a custom rom, right?
Also, all the links posted for previous firmwares are dead, is there a source where i could download a mint official 7740 or previous firmware? My Omnia has been bought in croatia. Should i only use the ROM for a specific region, or will any european rom do? I use my phone in english.
I can't do the zune roll back since i have to hard reset and change my liveID..
EDIT:
Is tis it? Is this how i flash an older firmware? If so, now I only need the ROM files..
Click to expand...
Click to collapse
Which ROM do you need?
Look here: Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO) and see if you find your
Osso17 said:
Which ROM do you need?
Look here: Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO) and see if you find your
Click to expand...
Click to collapse
that's the thing, I don't know which one do i need!
the phone has been bought in t-mobile, sim locked. I sim unlocked it, and need it sim unlocked.
Samsung-Omnia-7-Firmware-XXJJ6 is meant for the t-mobile croatia, but will that relock SIM?
Also, those links are all dead.
Blanketnam said:
Yeah I suppose. If you change to a live a ID with croatia set as the location it should change your store to the croatian one.
Click to expand...
Click to collapse
I know that.. Thanks anyway!
d.a.v.o.r said:
that's the thing, I don't know which one do i need!
the phone has been bought in t-mobile, sim locked. I sim unlocked it, and need it sim unlocked.
Samsung-Omnia-7-Firmware-XXJJ6 is meant for the t-mobile croatia, but will that relock SIM?
Also, those links are all dead.
I know that.. Thanks anyway!
Click to expand...
Click to collapse
I have all ROM same here:Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO)
But the problem is:after flash SIM is locked?
Sorry i don't know
Osso17 said:
I have all ROM same here:Omnia 7 i8700 ALL VERSIONS AND CSCs RETAIL ROMs (now even some NODO)
But the problem is:after flash SIM is locked?
Sorry i don't know
Click to expand...
Click to collapse
As I said, those links are dead. they don't work.
EDIT: actually, i found XXJK1_JK2_JK3 ALL PROVIDERS. it's Croatia RETAIL. Got confirmation SIM unlock will remain intact, and no magldr is needed. So that's all i needed to know on this subject.
Thanks for the replies though!
hi all, i have a trophy with 8107 and with spl 5.12. i wanted to install greek language, succeded but the only problem i currently have is that i need to developer unlock it so that i can install touch explorer or somehow to send the xml for camera settings to the windows folder, cause i dont have camera settings in the greek language.. any help would be gratefull. As far as i see and from the search i'm doing 2 days now, i don't think i can do anything for the device. the only think i didn't try is the goldcard method, cause i don't have the cables. If someone has a stable solution for this, that could save me a lot of time and searching.. thank you.
Even if you downgrade the SPL, you will have to flash an entire rom to gain the features you require. You could attempt interop unlock, but your system and drivers on the phone may be too new.
You might be able to use ansar's method: http://forum.xda-developers.com/showthread.php?t=1417849
First, you flash his SPL rom, and then flash an old rom from your carrier (if you have the unlocked/unbranded HTC Trophy, this is easy). Then you would install DFT's HSPL.
If you are going to go that far though, I'd recommend building a GoldCard. Try using the new newb friendly method of building a GoldCard. The links to the hardware are US links to parts, but finding the parts in Europe should be easy enough (and you don't need to cut/make cables or do weird things to SD cards).
i have almost the same situations, i have 8107, spl 5.12 and i want to downgrade to 1.x
i'm from portugal and my phone is locked to Vodafone. the only problem is that i discovered that it's Vodafone_ELL so the method of flashing SLSPL, is out of question, i think. what can i do to solve this ? i want to flash 8773 on my trophy and unlock it !
Your solution is to either find an older stock rom from your carrier for your phone, or to use GoldCard to flash the oldest original Trophy rom for Euro unlocked/unbranded Trophy (which will also change your phones MID to the unlocked Euro model). Then you'd manually install any other language packs the phone needs.
And no, I have no clue where to get a rom that'd work on your carrier. If its not in footballs rom thread, I don't know where to look or who to ask. You can get the original Euro unbranded roms there though.
simply just flash an older ROM ?
if it fails to install i can just install the ROM that i have?
The GoldCard method is something that i consider risky, but if it is the best way, i will have to do it !
Can i flash my trophy with this -> Vodafone_ELL, New Branded ROM RUU_Spark_Vodafone_ELL_1.10.162.06_Radio_5.52.09.1 6_22.33a.50.10U_by_ansar ??
You can give it a shot. Worst that can happen is your SPL will fail to downgrade.
Goldcard method is FAR from risky though (just WAS difficult to build manually.. hence that guide I suggested.. its easy following that guide). Its a fantastic way to flush your phone of HSPL and return your phone to true stock for warranty work. It seems to hi-jack some official diagnostic mode from HTC.
In earlier post, instead of MID I meant CID. If your going to use that ELL rom, build a GoldCard and use that instead. This new guide makes it far easier to do and no cutting/building wires and weird hacking tools that are difficult to use. You just buy the parts, plug them together, and format a sd-card with the software in the post! Using this method, you can unbrand your trophy, which will let you use the ELL rom for flashing.
kostas_8 said:
hi all, i have a trophy with 8107 and with spl 5.12. i wanted to install greek language, succeded but the only problem i currently have is that i need to developer unlock it so that i can install touch explorer or somehow to send the xml for camera settings to the windows folder, cause i dont have camera settings in the greek language.. any help would be gratefull. As far as i see and from the search i'm doing 2 days now, i don't think i can do anything for the device. the only think i didn't try is the goldcard method, cause i don't have the cables. If someone has a stable solution for this, that could save me a lot of time and searching.. thank you.
Click to expand...
Click to collapse
No matter what you do, just try to avoid the Interop Unlock XAP. I installed it few months ago and the phone refused after that to connect to my vodafone network. I had to give it to HTC maintenance to change the whole board.
wbadry said:
No matter what you do, just try to avoid the Interop Unlock XAP. I installed it few months ago and the phone refused after that to connect to my vodafone network. I had to give it to HTC maintenance to change the whole board.
Click to expand...
Click to collapse
interop xap? Oh... you had trouble reconnecting to your data... That is fixable with the fixed xap they released afterwards... a custom rom is just so much easier the doing all that manual interop crap.. I really don't understand why so many people do it vs custom roms.
I think its much easier to flash a custom rom via HSPL and have a GoldCard set aside in case to flash a total stock rom in case you need to send the phone in for warranty work. I do see where that is a problem if you don't have a stock rom for your carrier branded phone (unbranded Trophy and the USA Verizon Trophy got it easy vs the misc smaller Euro carriers).
I was under the impression that we were unable to install the new tango updates while running custom roms? Being a total noob and not knowing any better I may have done just that. Or being a complete noob I could be mistaken :silly: After screwing something up messing with registry files, yes I knew better but I couldn't resist, I did a hard reset on my Verizon Trophy running DFT Freedom ROM V5 for Spark_W with the Mango v3 Radio. Downloaded a few xaps and yep still unlocked so just for fun I ran the software updates and language packs using xboxmod's WP7 Update Cab Sender which completed with no errors. Didn't fix the Internet Sharing issue on this rom but did enable Commercial Mobile Alert System which was not included in this rom; see this thread http://forum.xda-developers.com/showthread.php?t=1546287&page=2. I am fairly sure these settings appeared before updating the radio to Mango v3. Like I said being a noob I could be completely off track but is there any other way to tell if the updates took?
tonbonz said:
I was under the impression that we were unable to install the new tango updates while running custom roms? Being a total noob and not knowing any better I may have done just that. Or being a complete noob I could be mistaken :silly: After screwing something up messing with registry files, yes I knew better but I couldn't resist, I did a hard reset on my Verizon Trophy running DFT Freedom ROM V5 for Spark_W with the Mango v3 Radio. Downloaded a few xaps and yep still unlocked so just for fun I ran the software updates and language packs using xboxmod's WP7 Update Cab Sender which completed with no errors. Didn't fix the Internet Sharing issue on this rom but did enable Commercial Mobile Alert System which was not included in this rom; see this thread http://forum.xda-developers.com/showthread.php?t=1546287&page=2. I am fairly sure these settings appeared before updating the radio to Mango v3. Like I said being a noob I could be completely off track but is there any other way to tell if the updates took?
Click to expand...
Click to collapse
No, it isn't that these updates won't work, it is that they haven't been recommended for installation (quiet a difference). The reason the driver update was always avoided, was because the WIRELESS driver would be replaced with one that wouldn't enable Internet Sharing (meaning if you installed the older driver updates, your Internet Sharing would either disappear, or simply stop working). Since this new driver enables it, it might not be a bad idea to update to it, since it fixes the random MAC address issue. Also, the recommendation was to not use Zune to update, since it will push out ALL updates.
Using WP7 Update Cab Sender is good for those who know what they are doing, but up until the Spark_W Tango update, we had no official hotspot support. Now that the hotspot support is in the driver, I don't see the issue in pushing the driver update cab (which I recently posted the link to here).
Also, if your running on a network other then Verizon, you might need to change the new default Internet Sharing settings using the info found here. If you have unlimited data go here to get it working.
You've inspired me to go ahead and push the driver update to my primary phone, worst case I can restore my backup if it kills tethering (which it shouldn't).
Looks like the driver update won't take for ansar's Tango rom. I'll need to do some testing to figure out why. Maybe it's about time I did a build of XevRev and released it for our phones. With tethering official supported, so long as I make the support universal in the WIRELESS driver, we'll have fixed tethering support.
TheXev said:
Looks like the driver update won't take for ansar's Tango rom. I'll need to do some testing to figure out why. Maybe it's about time I did a build of XevRev and released it for our phones. With tethering official supported, so long as I make the support universal in the WIRELESS driver, we'll have fixed tethering support.
Click to expand...
Click to collapse
I think an XevRev build would be highly anticipated and appreciated!!! I've been jumping through all the available custom roms for the Spark_W just to get a feel for them and trying different things out. I couldn't push ANY of the update cabs to ansars rom. I will try the driver update later with the DFT v5 and get back to you. I thank you sir for your time, your knowledge, and your hard work :good:
No luck pushing the driver update to DFT's rom either so decided to play around with the SolvZ v1 rom from DocMentalZ. Software update cabs installed no problem but still no luck with the drivers. I do like this rom especially the custom theme colors however seems to have the same problem with Internet Sharing as the DFT rom. I can't really see me using tethering it's just one of those things that if it's available I want it!!! Still, rather have the full unlock of a custom rom if I have to choose. Once again, I thank you sir :highfive:
If you pushed the OS cabs, push the updated driver for VZW Trophy as well. If the rom let you push from 8107=>8112=>8779, then you should be able to push the driver.cab after all of that (do a full backup before just in case it breaks something).
DFT v5 might work since its 8107 Mango.. but I think the leaked 8107 DFT is probably a better rom to try updating with.
Also make note of the tethering information in the post and do that if you must. To reach the programming menu, you MUST have a stock like rom installed without unlock.
I keep thinking when I do release XevRev, I'll have to have at LEAST three-five versions of it (one without full unlock but inter-op so you can use Root Tools for unlock and still have programming menu, a Full-Unlock ver 8107, and a Full-Unlock ver 8779, and a Full-Unlock with no preinstalled OEM apps).
Still no luck with OEM cabs on any custom spark_w roms. Quick question a lol off topic...Is Chevron unlock still possible if I flash back to stock?
Chevron unlock is possible, but not recommended. All fully unlocked roms have the interop unlock that chevron provides built in. I am currently working on a rom that might solve almost ALL of our problems... I'm testing the updatability right now to be sure.
All I can say it.. I figured out the source of the programming problems [it's related to XIP unlock and xap deployment] thanks to a huge help from ultrashot! Currently, I have a fully unlocked phone that can program and its updating to 8773 at this very moment (I intentionally built it on 8107 so we could install the newest HTC drivers and get the newest radio on our phones)... but it still needs a xap deployment tool.. since I had to remove all xap deployment from it to make programming work.
I'm going to try and manually deploy Bazaar to the phone in an attempt to still get xap deployment up and running from Dynamics7 manually.
I'll be testing the crap out of this and communicating further with ultrashot.. hopefully a "once and for all" solution can be found now the true problem has been identified.
8773 checked out okay with my Dynamic7's 1.21 port, now to test the new drivers with official internet sharing.
Okay, driver update failed. I'm guessing it fails because it cannot update the HSPLed bootloader.... Might need a custom driver cab that removes the SPL update and just does everything else. :/
TheXev said:
Chevron unlock is possible, but not recommended. All fully unlocked roms have the interop unlock that chevron provides built in. I am currently working on a rom that might solve almost ALL of our problems... I'm testing the updatability right now to be sure.
All I can say it.. I figured out the source of the programming problems [it's related to XIP unlock and xap deployment] thanks to a huge help from ultrashot! Currently, I have a fully unlocked phone that can program and its updating to 8773 at this very moment (I intentionally built it on 8107 so we could install the newest HTC drivers and get the newest radio on our phones)... but it still needs a xap deployment tool.. since I had to remove all xap deployment from it to make programming work.
I'm going to try and manually deploy Bazaar to the phone in an attempt to still get xap deployment up and running from Dynamics7 manually.
I'll be testing the crap out of this and communicating further with ultrashot.. hopefully a "once and for all" solution can be found now the true problem has been identified.
8773 checked out okay with my Dynamic7's 1.21 port, now to test the new drivers with official internet sharing.
Okay, driver update failed. I'm guessing it fails because it cannot update the HSPLed bootloader.... Might need a custom driver cab that removes the SPL update and just does everything else. :/
Click to expand...
Click to collapse
Waiting patiently...haha. I'm just having fun playing with all the different roms and apps and reading the forums absorbing as much as I can. Your time and work, and don't forget your patience with us noobs, is greatly appreciated as is ultrashots, Heathcliffs, jaxbots,and well every d*** person that devotes their time and effort here. Sorry if I only threw out a few names but there are so many. Seriously, thank you and can't wait for the new XevRev!!!