Database Users

[ROM]RUU_Mozart_TMO_DE_1.28.111.03_5.52.09.16_22.33a.50 _RELEASE

Here new ROM for Mozart
http://www.filefactory.com/file/b48..._1.28.111.03_5.52.09.16_22.33a.50_RELEASE.exe
DO NOT TRY TO FLASH THIS ROM FOR ANY OTHER DEVICE EXCEPT MOZART!
Enjoy!

THNX a LOT!
Hopefully it fixes my problems with sending text messages.

Will I lose my data (mainly my SMSes) if I install this update?
//EDIT -> according to several forums, I will lose my data...
and I haven't found any solution to backup my SMSes - yeah -.-
Is there anything I should regard or be aware of before updating?
//EDIT -> I just tried updating my phone and don't know how. It boots in the bootloader (RGB-test with some data on the device, SPL, the SD card, ...) just fine but the RUU doesn't find it.
I'm trying to flash it from a Windows XP machine - is there anything I have to take care of before I can flash it?
Or is there a real step-by-step manual for total dummies (I've flashed my HTC Diamond several times before without problems and have got no clue, why the PC won't find my Mozart).
The update process cancels with a CONNECTION ERROR [260].

will the hspa work on it from the tmobile usa after flashing this rom???

Invalid vender id
I have
INVALID VENDER ID
T-Mobile
Is there already a solution?
THX
nice greetings

Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).

I have T-Mobile Austria.
but that this should be the same, right?
Greetings

Well, I'm not exactly sure.
However, if you think about the update failing with a wrong VENDOR ID - I guess it makes a difference.

FrozenLord said:
Do you have the German T-Mobile version?
Mine flashed without any problems (after solving the driver problem...).
Click to expand...
Click to collapse
are there any big noticable changes after flashing the new rom?
or is it just a minor security/stability update?

Be careful when uninstalling TMO apps
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.

cmxqu said:
ROM is working very good, more fluent than stock version 1.25 - no problems found yet.
Still noticed the same problems with the stock ROM after uninstalling TMO shipped apps. When I uninstall Navigon the BING Map "Search" and "get directions" is gone/does not work anymore. When I remove "mediencenter" and plug in the headphones the phone is neither accepting nor able of making calls. However reflashing solves the problem - but you can't get rid of those TMO apps without losing functionality.
Click to expand...
Click to collapse
Strange, i deleted all the default T-mobile stuff and everything works just fine..
I also have the german T-mobile Mozart 16GB because it isn't released in the netherlands yet. I uninstalled all the programs Tmo ships. directions work just fine, very strange

hi
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...

fabrifox said:
hi bro.. i have a question, first.
1- How to flash this ROM in my HTC 7 MOZART?
2- What news have this ROM? it is possible that my phone is blocked trying to flash this rom?
3- What fix this ROM in my cellphone?
thanks bro...
Click to expand...
Click to collapse
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts

hi
FrozenLord said:
According to some other sites (just google the version number), this rom ships out with new devices. So no, it should not get you blocked, as it's a legit update.
Flashing is fairly easy: Backup everything you can, start you Mozart in Bootloader mode (pressing volume down while powering it on), plug it into your PC via USB, install the drivers if needed (done by installing Active Sync in XP, Windows Vista and newer should automatically find the needed drivers), start the updater and follow the instructions.
There is no official changelog, but several people think that the animations are smoother, the touchscreen reacts faster, ...
Seeing that there is no official changelog and the only thing we can do is assume what could have changed, I think there's no sense in discussing this. Especially since you can find several threads in other forums that discuss the changes in various lengths...
I haven't noticed any new problems after the update, so I guess it's at least as good as the previous version.
But this are just my thoughts
Click to expand...
Click to collapse
Thank you so much!!! Ure a bad man =) i try to flash and later i said ok....

if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?

WinUser009 said:
if i have a german t-mobile device, do I have to flash my mozart at first? Or can _I just install the new firmware without doing anything before??
edit: and is this version newer or this one: [ROM]RUU_Mozart_HTC_Europe_1.28.401.04_5.52.09.16_22.33 a.50_RELEASE
am I able to install both on my german tmobile mozart?
Click to expand...
Click to collapse
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.

Aerox912 said:
No you can't flash the HTC_Europe version, only the TMO_DE version.
TMO_DE stands for T-mobile Germany
HTC_Europe is the generic software for the non branded devices.
Doesn't make any difference except the useless apps you get from t-mobile.
But after you delete them everything is the same.
And for the record, You don't have to flash your phone at first... Installing new firmware IS flashing. so you just run the RUU and make sure zune is running and phone is running, not in stand-by.
And be sure to backup everything you want to keep, haven't flashed my mozart, but i think you lose all data when you flash it.
Sure someone else knows that.
Click to expand...
Click to collapse
Thanks for the answer!
I thought that I have to set the mozart in the bootloader mode, in order to flash. When I was telling it "flashing" I meant something like hspl like we had to do on the HD2, befor we could flash custom roms or htc roms on it.
edit: and is there any possibility to go back to: 1.25.2250.5 firmware (now installed on my phone)?
and last question this 1.28 version will not breake my warranty, right? It'S a normal t-mobile rom, isn't it?

Guys, I'm not sure I fully understand everything so far.
I basically have a Telstra (Australian) HTC 7 Mozart. From what I gather, I cannot flash this on my device until it is unbranded, is that correct?

hello to everyone.
I have a htc t-mobile mozart Germany but I live in Venezuela and I can assure you and proven DepNet.com for both 1.25 and 1.28
posted on this page to a friend Football and run to perfection
and also I can tell you that my phone came with 1.25 and the 1.28 istale him but then return to 1.25 and all is well.
and the echo for several times trying to place the Spanish language and if anyone can help I'd appreciate it forever

@ WinUser009:
HSPL was needed because we used to flash cooked (and therefore custom-made) ROMs, which were not signed by HTC or any other company able to sign them. These ROMs are unmodified and signed, which is why you can flash them without flashing any unlocked HSPL first.
Bootloader-mode is just a different mode to boot in - it does not need any changes to your phone!
I don't think that there is a possibility to go back to 1.25.xxx - but honestly why would you want to? But I have to admit that I have not yet tried it...
As to the warranty: that's a complicated matter...
This firmware is not official and my new Mozart (I got a new one after sending it in) still had the 1.25 firmware installed (someone posted that newer phones should ship with the 1.28). So there might be a person detecting that you flashed it yourself, if they keep sending out new phones with 1.25 preinstalled.
However, the phone I turned in had 1.28 flashed and I have not received any complaints when I sent it in for a replacement. So I guess it is up to your shop but it should not pose any problems!
@ameel
You can flash as soon as one of these things happen:
- custom roms are released that don't check for the carrier information
- you unlock your phone (somehow)
- Telstra releases an update
But as of now you can't flash these T-Mobile roms on your Mozart.
@minino405
Sorry, but I didn't understand your post. What did you try to tell / ask us?
I hope I could help you with some of your questions

Removing branded start-up logo? (Samsung Omnia 7)

Hi all, new here
I'm in Australia with the Samsung Omnia 7.
I bought phone online from someone who won it in an Optus competition (Optus being the carrier here).
The phone is unlocked to any network but for about 3-5 seconds upon the phones startup, there is a branded Optus logo that is displayed.
I want it GONE.
What's the best way to do this? I'm running the original firmware, not the new leaked one. I'm also not game to flash to the leaked newer firmware as Samsung hasn't released it officially and I've heard some Aussies have had some issues after doing it.
What's the safest way I can remove this start-up logo branding? Thanks!

change to a different firmware, vol up+camera+power button > download mode> samfirmwares.com firmware(unbranded)! Thats currently the only possibility.

What about by editing a registry entry or something?
I'm not prepared to "upgrade" to that firmware until Samsung releases it (if they do).
They probably haven't for a reason.

try chevron unlocker, install registry explorer search and share!

Is chevron unlocker going to change something about my device I can't reverse? I want full control of any testing I do.

sorry for late reply, the firmware file consists of lot parts (Phone, csc,eboot,pda), modifying a specific file in the archive may remove the startup logo.Just search wiki for answers about the significance of each part.Or better still, wait for the update release by MS see if it changes anything! Chevron won't help!
Most users have upgraded to the firmware available at samfirmware.com I too running omnia 7 t-mobile uk version unbranded by downloading I8700XENJK1. Have had no issues so far!

Any updates on this with new unlocking methods etc..?
I'd really like that start up pic gone if I can!

Gp. said:
Any updates on this with new unlocking methods etc..?
I'd really like that start up pic gone if I can!
Click to expand...
Click to collapse
No, like has already been said, the only way to get rid of this is to re-flash the device. You should be able to only flash parts of it though which would leave the OS (and all apps, settings etc) intact. I'm guessing it's the bootloader image that includes the logo you're seeing, so would start there.

emigrating said:
No, like has already been said, the only way to get rid of this is to re-flash the device. You should be able to only flash parts of it though which would leave the OS (and all apps, settings etc) intact. I'm guessing it's the bootloader image that includes the logo you're seeing, so would start there.
Click to expand...
Click to collapse
Do you have anyway to do this? There's no tool I've heard of which can replace specific parts of the ROM?
It's a full reflash or nothing, I think.
Casey

Casey_boy said:
Do you have anyway to do this? There's no tool I've heard of which can replace specific parts of the ROM?
It's a full reflash or nothing, I think.
Casey
Click to expand...
Click to collapse
For now it is. Even with WinMo 6.5 we had to flash the 2nd start up screen. Then we had full access to the core of OS. Right now we dont. So only way to get rid of it is to flash a brand free rom issue by samsung and not a carrier

Any updates on this now?
Anyone know a registry key that is associated with the start up logo?

evolutionqy7 said:
For now it is. Even with WinMo 6.5 we had to flash the 2nd start up screen. Then we had full access to the core of OS. Right now we dont. So only way to get rid of it is to flash a brand free rom issue by samsung and not a carrier
Click to expand...
Click to collapse
Are you absolutely certain about this? The ROM comes in parts and I would assume we could flash only part 1 or 2 if we so wanted?
Gp. said:
Any updates on this now?
Anyone know a registry key that is associated with the start up logo?
Click to expand...
Click to collapse
There IS NO registry key for this. The boot logo is displayed long before the OS has even started booting.

I've also installed the firmware from samfirmware.com and I've had no issues at all. I've managed to update to Pre-NODO and NODO without any pain (apart from having to use the Hungarian Hack to get NODO early).
I've seen no downsides from my perspective.
The only risk I can see is that no carriers will have tested WP7 against this firmware until it's officially released by Samsung.

if you have a 4.10.1.9 bootloader, there's no possibility to change your rom....forget it.
right now, this bootloader fail to upgrade... no download mode ability at omnia 7

mughalgxt said:
change to a different firmware, vol up+camera+power button > download mode> samfirmwares.com firmware(unbranded)! Thats currently the only possibility.
Click to expand...
Click to collapse
Hello everyone, Im new to the site. I too purchased, what I thought to be unbranded, a mobile over the internet that was branded with T-Mobile Germany. Im in Australia. I can use my Optus SIM Card. But what was worrying me is what affects a branded phone (especially from another country) would have on me and my usage, especially with the new Mango update.
Now unless someone can tell me that it really doesnt make any difference to how the phone will work, I want it unbranded for safety sake. That being said, my quote above, This firmware, obviously it sounds custom and not official. If I install this firmware, any Windows Update up until this point (Not Mango), will it still install via zune? and will it take on the Mango update when thats out?
Thanks guys

ChisPydtank said:
Now unless someone can tell me that it really doesnt make any difference to how the phone will work, I want it unbranded for safety sake. That being said, my quote above, This firmware, obviously it sounds custom and not official. If I install this firmware, any Windows Update up until this point (Not Mango), will it still install via zune? and will it take on the Mango update when thats out?
Click to expand...
Click to collapse
I believe samfirmware just releases leaked firmware. They are therefore all "official" in a sense and the unbranded ones should just be firmware for the unbranded devices.
If you're using a branded phone, the official updates will roll out when the original carrier certifies it. Apart from that and the boot branding, there shouldn't be many differences.

ChisPydtank said:
Hello everyone, Im new to the site. I too purchased, what I thought to be unbranded, a mobile over the internet that was branded with T-Mobile Germany. Im in Australia. I can use my Optus SIM Card. But what was worrying me is what affects a branded phone (especially from another country) would have on me and my usage, especially with the new Mango update.
Now unless someone can tell me that it really doesnt make any difference to how the phone will work, I want it unbranded for safety sake. That being said, my quote above, This firmware, obviously it sounds custom and not official. If I install this firmware, any Windows Update up until this point (Not Mango), will it still install via zune? and will it take on the Mango update when thats out?
Thanks guys
Click to expand...
Click to collapse
Branded won't make any difference to your experience. But you can flash the unbranded ROM it's easy enough and you should still get the Mango update.

So?
GP, have you gotten rid of it yet?

Sherwet said:
GP, have you gotten rid of it yet?
Click to expand...
Click to collapse
Just flash an unbranded ROM dude, really easy

The second screen, the carrier logo, is simple mologo.bmp file... If you replace it with some file explorer, you are done

[Q] Updating after flashing a rom.

Hey Guys,
I have recently purchased a T-mob UK Omnia 7 and am willing to flash it with a non-branded rom. I am confident enough in how to do it. Are the roms available from samifirmware unbranded?
The thing I wanted to ask was, after flashing the rom, am I going to receive notifications for updates? Is the phone going to update? The reason I am asking is that I noticed some people are facing problems when updating the post-nodo update.
thanks

Hey,
I just did the same that you want to do. Flashed the Omnia 7 with the
Firmware Version I8700XXJK1 and "de-branded" my phone with that.
After flashing I got a message that the pre-nodo update is available.
After updating the Omnia 7 to 7008 I thought I will get the NoDo Update but nothing came yet....
Hope that this won't take too long

Mordanius said:
Hey,
I just did the same that you want to do. Flashed the Omnia 7 with the
Firmware Version I8700XXJK1 and "de-branded" my phone with that.
After flashing I got a message that the pre-nodo update is available.
After updating the Omnia 7 to 7008 I thought I will get the NoDo Update but nothing came yet....
Hope that this won't take too long
Click to expand...
Click to collapse
Hopefully. I just hope that we will be able to get the following updates as well as nodo. Any thoughts anyone?
I am coming from Android and still getting used to the differences.

No wonder those ROMS are branded, but are they truly?
Roms posted on samfirmware, are all branded but some does not have a splash screen for operator logo, there seem to be some 000-88 carrier code to deal with. I had my Omnia 7 on Orange, I flashed it with DBTJK1 from samfirmware, it picked up the pre-nodo update right away. NoDo, however was not available as of yesterday.
Having checked on Microsoft's website, I learnt that Orange was delivering all available updates. So, I tweaked back my registry to ORG-GB (Originally noted from my official ROM before replacing it), the restarted my phone and NoDo was available.
So just hack your registry for the carrier or any unbranded code and you shall get the update right away.

xdamir said:
No wonder those ROMS are branded, but are they truly?
Roms posted on samfirmware, are all branded but some does not have a splash screen for operator logo, there seem to be some 000-88 carrier code to deal with. I had my Omnia 7 on Orange, I flashed it with DBTJK1 from samfirmware, it picked up the pre-nodo update right away. NoDo, however was not available as of yesterday.
Having checked on Microsoft's website, I learnt that Orange was delivering all available updates. So, I tweaked back my registry to ORG-GB (Originally noted from my official ROM before replacing it), the restarted my phone and NoDo was available.
So just hack your registry for the carrier or any unbranded code and you shall get the update right away.
Click to expand...
Click to collapse
Can you please help me finding a guide how to tweak the carrier version? Ive been looking for it whole day with no luck.

Just download Chevron wp7 updater, updates your none branded splash rom to nodo, make sure you prevent lock it on prenodo, then you got a awesome hacked phone, mango not coming out till a longgg time so enjoy most of it, I am!
Sent from my OMNIA7 using XDA Windows Phone 7 App

PS. My phone was t mobile jk1 speeded my phone up 2x then nodo blew it away, now I got a phone with no tmobile splash as for thefuture.updates worrry about them when they come, have problems flashing? Buy a s9000i galaxy jig on eebay for 3 pounds, hope I helped, cheers
Sent from my OMNIA7 using XDA Windows Phone 7 App

If you want to keep your tmobile just chevronwp7 it and use the debrand.xap with toms cap tool see windows developer section for wp7 tools, also Omnis 7 developement
Sent from my OMNIA7 using XDA Windows Phone 7 App

stopmybeat said:
If you want to keep your tmobile just chevronwp7 it and use the debrand.xap with toms cap tool see windows developer section for wp7 tools, also Omnis 7 developement
Sent from my OMNIA7 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
Please stop, you've said the same thing three times now.
I have tried flashing the DBTJK1 firmware today and I got the feburary update but not nodo. I even tried setting the carrier to ORG-GB and rebooting the phone with no luck. If anyone can give any advice, I'd greatly appreciate it.

I flahed my Omnia 7 with the "I8700 XEN I8700XENJK1" ROM, andthe day after I got the NoDo through Zune.
So no "blocking" of updates here in Denmark on "3"
UPDATE: Sorry, I've misread your ROM-version

So, what is the real difference between these firmware versions:
I8700XXJK1 - DBT
I8700XXJK1 - XEN
I8700XXJK1 - BSE
Coming from Germany I just flashed the DBT and got the pre-NoDo but
NO NODO

xdamir said:
So just hack your registry for the carrier or any unbranded code and you shall get the update right away.
Click to expand...
Click to collapse
Would you be so kind and let us know which unbranded code to use or how to get that?

Changing carrier code does *not* force the update down, been there and done that.
However if your gullible to try, unbranded code is 000-88

MrSkiba said:
Changing carrier code does *not* force the update down, been there and done that.
However if your gullible to try, unbranded code is 000-88
Click to expand...
Click to collapse
Thanks for that mate, and how can I fix this in the registry? I guess I have to unlock the device again.....but don't want to do this anymore.
I just want to receive the NoDo Update with my - now unbranded - WP7 !!!

Yep, you need to unlock the device and modify the registry settings, however if you've flashed with any of the unbranded ROMs on samfirmware, it'll already be sitting on 000-88.

MrSkiba said:
Yep, you need to unlock the device and modify the registry settings, however if you've flashed with any of the unbranded ROMs on samfirmware, it'll already be sitting on 000-88.
Click to expand...
Click to collapse
Thanks, didnt know that the roms available at samfirmware are set to that code. Good news for me.

Many thanks for these informations. I flashed my Omnia 7 with the I8700XXJK1 - DBT ROM and can confirm that the registry setting is set to 000-88.
But the Problem is that I still receive no NoDo and I am getting nervous.....
Updated it before with Chevron, then flashed it down to the Original Samsung I8700XXJK1 - DBT...7004
Now I am on 7008 hanging......
Anything went wrong?

The NoDo update seems to be selective, the way it selects is unknown, if you don't get it immediately, don't worry about it, it'll eventually come your way. Theres no method I've found in forcing the update down (even the zune timing trick seems a bit of a hoax to me).
I've contacted my Samsung Support Centre and I'm querying what unbranded UK firmware they have and whether its preloaded with NoDo. They will probably get back to me within the week.

read what I said, the 3 times are for your benefit, update via the way I said no Zune, cheers
Sent from my OMNIA7 using XDA Windows Phone 7 App

MrSkiba said:
The NoDo update seems to be selective, the way it selects is unknown, if you don't get it immediately, don't worry about it, it'll eventually come your way. Theres no method I've found in forcing the update down (even the zune timing trick seems a bit of a hoax to me).
I've contacted my Samsung Support Centre and I'm querying what unbranded UK firmware they have and whether its preloaded with NoDo. They will probably get back to me within the week.
Click to expand...
Click to collapse
This is the most useful thing anyone has ever said, I'll hold on for the moment. Please let us know what's going on with the UK unbranded firmware, thankyou.

[Q] Unlocked phone remains unlocked ?

I just got an unlocked focus that was once AT&T, but I will be using it on Telus. I was wondering, if I update it to mango unofficially, will it stay unlocked ?
Also, is there any news on official mango updates ?

bbbbqq said:
I just got an unlocked focus that was once AT&T, but I will be using it on Telus. I was wondering, if I update it to mango unofficially, will it stay unlocked ?
Also, is there any news on official mango updates ?
Click to expand...
Click to collapse
For updating/unlocked, check my answer here
For Mango there are only rumors, indicating Mid September.

I tried entering *#7465625#, and everything is disabled except network lock. Does that mean it's still locked ? I don't have a non-att sim to try yet

bbbbqq said:
I tried entering *#7465625#, and everything is disabled except network lock. Does that mean it's still locked ? I don't have a non-att sim to try yet
Click to expand...
Click to collapse
Yes, it's still locked. Can you try and toggle it disabled?
You can get a cheap unlock on ebay nowadays, for a few bucks.

Gonna reuse this topic:
Phone works, but MMS doesn't. I just get the notification that I received an MMS, but it won't open, and I also can't send it
How would I dev unlock ? I've ooked, the answer always seems to be "go do a search"

bbbbqq said:
Gonna reuse this topic:
Phone works, but MMS doesn't. I just get the notification that I received an MMS, but it won't open, and I also can't send it
How would I dev unlock ? I've ooked, the answer always seems to be "go do a search"
Click to expand...
Click to collapse
If you're not on 7004/7008 then you need to re-flash a rom from here and do the Chevron unlock.
There is no unlock post 7008 (NoDo or Mango) except for developer unlock (paid).
After you flashed 7004 and unlocked, update to NoDo, install SMS xap (diagprovxml) and try to update to Mango, if the carrier has released it specifically for your phone. That's for short, but it's actually quite complicated.
Or read this

bbbbqq said:
Gonna reuse this topic:
Phone works, but MMS doesn't. I just get the notification that I received an MMS, but it won't open, and I also can't send it
Click to expand...
Click to collapse
That's a typical probelm for unlocked phone used in another carrier because there is no easy way to manually configure MMS on a new carrier on WP7. WP7 relies on Automatic Device Configuration by the carrier network or pre-defined configuration on the handset.
But Samsung has a Network tool app you can download from marketplace. If your carrier is on the list, you can use the tool to switch the network profile so that your MMS will work.

Network tool only shows ATT
As for dev unlocking, it, along with everything else, will not affect my carrier unlock ever, is that correct ?
Looking at the dev unlock stuff, how do I flash it back to 7004 / 7008 ? Can't find an option in Zune
Thanks

bbbbqq said:
Network tool only shows ATT
As for dev unlocking, it, along with everything else, will not affect my carrier unlock ever, is that correct ?
Looking at the dev unlock stuff, how do I flash it back to 7004 / 7008 ? Can't find an option in Zune
Thanks
Click to expand...
Click to collapse
Flash a 7004 rom from here.
Unlocking (Chevron or developer) is the ability to sideload applications. Doesn't affect your carrier (un)lock.

please help install telstra

hi everyone, after reading through some of the post , i was confuse on which method to use, currenly i'm with Bell canada running 7.10.8107 , i read that telstra enable me to use wifi tether. here the step if i'm not mistaken
1. download latest LG C900K Firmwares
LG-C900kAT-00-V10d-TEL-AU-AUG-15-2011+0_DZ.zip
2. use nasirahmed method with correct DLL (LGC900KB_100927_MP.zip) to install
3. after use zune to update to latest firmware or download
WIFI Tethering Drivers - 1.0.5.10 (December 2011)
Code:
http://download.windowsupdate.com/msdownload/update/software/dflt/2011/12/437223_lg-c900k_telstra_australia_1.0.5.10.pks_1e2a877b551d2497396bf1d07bf19c833d78381a.cab
and use this method to update
http://forum.xda-developers.com/showthread.php?t=1306415
please confirm if this the right way to do, is there any risk involve in this, will this relock firmware
thanks

Steps are correct. You might find some hurdles hear and there but just be patient and read ALL instuctions.
I did it and it's working but I'm now in the process of reverting my phone back to C900B because I'm not able to unlock C900K. Also, Zune will not update to latest firmware so you will have to do that manually.
If you don't have full backup you will lose everything from your phone.
Good luck.

Klikerko said:
Steps are correct. You might find some hurdles hear and there but just be patient and read ALL instuctions.
I did it and it's working but I'm now in the process of reverting my phone back to C900B because I'm not able to unlock C900K. Also, Zune will not update to latest firmware so you will have to do that manually.
If you don't have full backup you will lose everything from your phone.
Good luck.
Click to expand...
Click to collapse
thanks for reply Klikerko, so there still minor issue , and this firware will not let you use developer unlock, if that the case then i'll wait for bell to update, i rather have it unlock than tether

dev unlock works fine on telstra rom

bobzero said:
dev unlock works fine on telstra rom
Click to expand...
Click to collapse
so is ther any other issue that you using telstra rom, thanks

phihung07 said:
so is ther any other issue that you using telstra rom, thanks
Click to expand...
Click to collapse
voice mail number is not set up, you must add it yourself. Other than that, I can't think of any problem.

phihung07 said:
thanks for reply Klikerko, so there still minor issue , and this firware will not let you use developer unlock, if that the case then i'll wait for bell to update, i rather have it unlock than tether
Click to expand...
Click to collapse
Here's hoping that LG Canada will recognize that it can be updated to have tethering at all. So far they've told me it's physically impossible. Twice. Even after I've tried to tell them that it works fine with the Telstra firmware.
Good luck with the switch over if you chose to go that route.