[Q] Force 3g only in WP7? - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

Is there any way to force wp7 on my HD2 to use only 3G Data?
As of now it is constantly switching between 3G and Edge

Is it not possible at all ? I have been searching in google with no luck

its falling back to 2G when it cant sustain a 3G connection, perhaps there is a way if editing it at ROM level, or a reg edit, but disabling 2G data, even if it were possible wouldnt help your situation
try playing around with different radios, especially the hardware radio, those tended to be regional based so one that doesnt work wel with some people may be great for others.

Is there a way to use only 3G ?
In android with the same radio ROM, i can do so (option is there to select WCDMA only).. so is there any settings or app which give me the same freedom in WP7
Thanks in advance..

Related

[Q] Poor 3G to 2G handover

Hey there, I enjoy reading this forum but I had little to contribute with as I am an android noob. So unfortunately my first post is a question forced by the fact that something is wrong with my DHD Thank you in advance for your advices!
The problem is - when in areas with low 3G coverage the phone keeps on searching for 3G for too long instant of seamlessly switching to 2G, which often has full signal bars. This way the phone acts as if there was no signal and sends incoming calls to the voicemail even though all it has to do is to switch to 2G as soon as 3G gets too weak.
My previous phones had no problem with this. In my city the 3G quality varies from area to area but the 2G coverage is perfect almost everywhere. So I used to be sure that my phone never really disconnects from the network, it only might have dropped the 3G signal in favor of 2G while keeping the calls and everything.
I know I can disable the 3G and stick to 2G and EDGE but this way using full data capabilities of the phone turns into pain instead of pleasure.
Just to make sure and to show I did my homework, this is NOT:
- the death grip case
- a network related problem /I suppose.../
- a problem with data connection /I have never run into any problems with this/
My questions are:
- is anyone of you experiencing this?
- is there a way to force the phone to hand over the connection from 3G to 2G quicker without "blind spots"?
- does any custom ROM improve this? /I am running the latest stock HTC DHD android 2.2 with Sense/
- is there any hint that android 2.3 gingerbread should fix this issue?
Thank you, hope to find a piece of good advice here!
I`ve found this service menu and I switched the preffered network from WCDMA preferred to GSM AUTO PRL. will see if it helps.
I havent noticed any more problems since I did the switch. I think it helped. I cannot be 100% sure but I think it did the thing for me. I forgot to mention that I also switched networks mode from Auto to European but I think this has nothing to do with the issue.
fortuneman had my answer. To access the service menu on the soft phone keypad enter *#*#4636#*#* and its under Phone Information.
Switching from 2g to 3g works seamlessly. But the other way around doesn't work that well. Nothing to do with the phone. Just the net tech that has its flaws. If your in a call and switch to 2g, the call will most certainly be disconnected.
Sent from my Desire HD using XDA App

[Q] No data connection when switching between gsm and wcdma

Hello!
I'm using Rafdroid HD von my HD2 now for 2 weeks and I'm verry happy with it, i just have one problem (dont know if it depends on de android build or on the hd2 or whatever...)
I'm using gsm all the time because it has less battery drain in stand by, but when i want to use data for surfing etc. i switch to wcdma. on my x8 wich i had before this was no problem, it switched within seconds between the networks. Also the HD2, BUT it doenst start a data connection. i just can talk but no data.
in "wireless and network" the option for wireless data is checked, but the whole option is not clickable and it says "starting" (dont know if it says starting, i use the german version, there it say "einschalten..."
when i restart the hd2 then the data connection is working. so all times when i want to switch the data connection i need to restart my hd2.
is there a way to solve this problem?
sorry, i've searched the forum, but i haven't found anything
thanks and best regards, chris
No one who knows something about this issue?
tried this yet??
enter: *#*#4636#*#* in your dialer
go to phone info
go all the way down
now you can manually switch between edge or 3G
(default should be WCDMA preferred)
Thank you, I've foudn this idea before but it doenst change anything.
I'm using the whole day only gsm/edge, but when i need more data (searching something on google etc.) i would like to switch to 3g. after this, back to wcdma. on my x8 this worked well, on the hd2 it looks like it cant start the data connection when switching between the two types of network...
coldest~~~ said:
tried this yet??
enter: *#*#4636#*#* in your dialer
go to phone info
go all the way down
now you can manually switch between edge or 3G
(default should be WCDMA preferred)
Click to expand...
Click to collapse
viper2097 said:
Thank you, I've foudn this idea before but it doenst change anything.
I'm using the whole day only gsm/edge, but when i need more data (searching something on google etc.) i would like to switch to 3g. after this, back to wcdma. on my x8 this worked well, on the hd2 it looks like it cant start the data connection when switching between the two types of network...
Click to expand...
Click to collapse
Same here,
when running runnymede rom from dung my phone switches to WCDMA (in *#*#4636#*#*; because of this I have no data connection 3G or HSDPA. When switching back to GSM only data conncetion (3G or HSDPA) is working but after a while phone switches back to WCDMA preffered.. How to change this into GSM only as default???

[Q] No service problem

UPDATE: I have noticed that I have only no 2G service. What am I doing wrong? From *#*#*4696#*#* under phone info I have enabled "WCDMA preferred". Can this be a hardware thing if I have 3G connectivity but cant connect to 2G network??
Hi everyone!
I've been having a strange problem lately - at random times and random places I suddenly have no service so i can make no calls. Then after about 10 minutes I have service again and everything seems to be just fine until the next time that happens.
This can happen at random places but also after I return from somewhere where there's not supposed to be any service (from the basement for example) it also takes very long (10-20 min) until I have service again. Also i have noticed that sometimes when I have no bars and can make no calls, I can still go online on mobile internet (not wifi).
It started after I updated Hyperdroid 2.01 to Hyperdroid 3.0. I have since then tried several times to completely wipe everything (have reinstalled WM6.5 (the problem persisted in WM6.5 also) and have wiped everything with task29.
After wiping I have reinstalled radio v 2.15.xx, MAGLDR 1.13, CWR 150MB partition and then reinstalled Hyperdroid 2.01 but i still keep getting the random service drops.
Can this be hardware-related? What else can I try?
"What else can I try?"
Your sim in another phone. Not just for 5 minutes, for a few hours.
Have you looked into your providers network status? Could be doing system upgrades.
Have you inadvertently set to use 3g only?
I didn't know that there was an option to only use 3G. But as soon as I switched to "only 2G" I lost the connection again so it might have something to do with that. How could I disable this "only 3G" (I can't find it near the "only 2G" option).
Also will try a different sim.
Thanks
isandkrl said:
How could I disable this "only 3G"
Click to expand...
Click to collapse
sorry, not sure offhand, i used to know how to do it in winmo.
So now I have tried dialing *#*#*4696#*#* to enter "phone information" and there ir reads "WCDMA preferred" so that means 2G should be enabled as well. But when I select GSM only i dont have any service and under DATA it reads "fail because Radio Not Available". I have 2.15.xx radio rom installed, also tried 2.12.
Did your tryed to flash a other kernel?
I did. But the same kernel worked for me about a week before so this cant be it right?
Can this be a hardware thing if I have 3G connectivity but cant connect to 2G network??
thats not a hardware issue, sounds like a Rom problem. Test out the radios, and see which one gives you the best signal
I have tried different radios (2.08, 2.10, 2.15) different android roms (Hyperdroid 1.04, 2.01, 3.0, 5.30, MIUI gingerbread) and different WM6,5 roms. I have tried switching SIM cards. I have tried switching off ond on data connection. Have tried switching 2G/3G to 3G only and to 2G only. Nothing helps. I still get no service when I am in a 2G only service area.
Please help. Anybody?
finally, somebody with a same problem as me... i have tried to fix it for 6 month, and still can't get any 3g signal, i have tried task 29, wm 6.5, different android nand and sd rom.
but the 3g signal showed in wp7 rom, have you tried wp7?
I have not. Maybe I will. But my problem is that I don't have 2G signal - I do have good 3G signal though.
Tried to install Windows phone 7. No luck. Still no 2G signal. What does anybody think of this http://forum.xda-developers.com/showthread.php?t=1190180?
isandkrl said:
Tried to install Windows phone 7. No luck. Still no 2G signal. What does anybody think of this http://forum.xda-developers.com/showthread.php?t=1190180?
Click to expand...
Click to collapse
isandkrl said:
I have not. Maybe I will. But my problem is that I don't have 2G signal - I do have good 3G signal though.
Click to expand...
Click to collapse
I'm the opposite, but did you able to browse mobile internet with the no signal?? If you can, and get 2g speed then it's not the hardware, as your phone still able to get 2g signal
Sometimes my phone can browse the net in 3g speed even with no signal, so i guess its a software problem??
Two or three times I have had G or E instead of H or 3G in the notification bar but although it shows me that it has service it wont connect to the internet neither can i take calls during that time. All the time that I have 3G or H connection i can take calls and I havent noticed that internet would be slow.
So I have almost given up hope. I have quite good 3G service where I live but still 3G is not that strong indoors and I have too much downtime so my next desperate step would be to open up my phone and see if I can find something wrong with the connectors.. I really dont want to do that..

[Q] RARE no WCDMA or 3G conection at all

Hi, My name is javier, I have bought one nexus 4 8Gb orange phone, but it is sim-unlocked so I can use my MVNO ( mobile virtual operator network) But I am unable to use 3G or WCDMA band in spain.
I Know here are some problems about MVNO and 4.3 and 4.4 and 4.4.2 Android versions, but my problem is not this one. On a Vodafone SIM Card, I am unable to get internet also on this unit. The rest of the phone works flawessly, but 3G does not. I am starting to think that GSM chip is broken. But Hey 2G Networks works well no signal lost, perfectly clear voice on dialing, and constant 20kb internet data speed. No matter is an MVNO or a real operator like Vodafone.
Searching the net, i came over this:
Nexus 4 Suffering from 3G and 4.ยท Upgrade
And for all of you that are not going to take a deep read, let me tell, that they say there is an error on 4.3 and newer Android framework and Radio Baseband version. So people get unconsistent 3G connection. Well mine is really consistent. No conection at all never. So I think this is not my problem, although I have tried a bunch of roms even all google ones, all basebands and a couple of sims from diferent company.
Anyway, a quick fix is quoted here: Quick 3G Fix But I do not understand what is this or what I am supposed to do with that. Can someone help me with this?
And, after that, I start to look at something more, like Sim Unlocking is snot well done and 3g Band is still locked. Havent tried it with Orange sim as I do not have any. Is there any secret menu where network locks are shown?
And moreover, How can I trace what is happening to my chip? If someone has made hybrid basebands to unlock 4G, there has to be a way to track what is happening to radio basebands while they are working...and perhaps, I can gather some good info to work with...
One more thing on *#*#4636#*#* menu, I can force WCDMA or GSM or the rest options, If I use Force WCDMA, I get signal lost for ever, If only GSM or WCDMA Preferred, it has signal but only gprs internet conection. This is with ONO (MVNO). But with Vodafone, I get HSPA Conection but no internet at all.
Really annoyed with this, hope someone is able to help me with this.
Thanks to all in advance.
Nobody? well i will try to find out myself.
Anyway I have started to know something about android tracking with logcat, and would like to know if there is any way to check all the traces of the modem to check if the chip is faulty or is a driver issue and i have to learn to modify it myself. Thanks.

Network coverage issues or device ?

I'm having some problems with my G2 - I don't have good 3G coverage especially inside and my phone keeps dropping calls when on 3G. It seems the software doesn't reconnect that fast and doesn't switch to 2G when the 3G signal is too low. Is there any way to change the preferred network and stop the device being so agressive at keeping 3G connection?
Settings/networks/tethering & networks/mobile networks/network mode/GSM only.
I already know that. It is the most unhelpful advice to give. I have to constantly go into settings and change that? No way. It isn't in the notification toggles which is really odd. Any idea how to add it? I feel my G2 has some radio issues.
Sent from my LG-D802 using Tapatalk
axlastro said:
I already know that. It is the most unhelpful advice to give. I have to constantly go into settings and change that? No way. It isn't in the notification toggles which is really odd. Any idea how to add it? I feel my G2 has some radio issues.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Well if you're going to be like that then there's no wonder why there aren't a stream of responses on here with people trying to help you out.
Just remember, you're the one with the problem, so you may want to be a little nicer to those that try to give you help.
I'm sorry about that, but there wasn't a stream of responses in the first place. He was just stating the obvious, and the obvious is that the G2 doesn,t have a shortcut to switch between 2g and 3g. I'm just trying to figure out a way to do that, but all the apps that claim to do that and they are too many of them, just don't work. I'm thankful for any help, don't get me wrong.
Sent from my LG-D802 using Tapatalk
axlastro said:
I'm sorry about that, but there wasn't a stream of responses in the first place. He was just stating the obvious, and the obvious is that the G2 doesn,t have a shortcut to switch between 2g and 3g. I'm just trying to figure out a way to do that, but all the apps that claim to do that and they are too many of them, just don't work. I'm thankful for any help, don't get me wrong.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
There isn't a solution as simple as hitting a switch, but you can try the following:
Go into your Dialer and tap in *#*#4636#*#*
This will take you into the Testing Menu
Select 'Phone Information'
Then about half way down you will have a drop down where you can "Set preferred network type:"
This will allow you to choose whether to use 2G or 3G, but more important to your case you can choose how it will react if signal strength is low.
You probably want to select something like "GSM auto (PRL)"
Bare in mind though that this option will reset itself back to original setting each time you reboot the device.
Now I don't know if this will solve your problem, but it is worth testing out.
Here's a list detailing the main available options:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
Wnderful setting.. amazing speed... performance of handset increased like rocket..
Thanks a lot...
Hi,
After dialing *#*#4636#*#*, it shows up the menu.
But i am not able to select Phone Information option. It says "This application does not work on this device".
Phone info: LG G2 D802 - Rooted - PowerG2 2.1 ROM.
I face frequent network signal drop, I tried CloudyG2 ROM also.
Thanks !

Categories

Resources