Related
Ok. So obviously anyone who has installed the google goggles remover app from the market from paul will have issues to install the ota download via bootloader. I've tried pauls method to fix this and flash back to stock rom via fastboot which could be found here - http://android.modaco.com/content/t...ng-to-stock-1-19-before-applying-the-new-ota/
My issue is it doesn't work for me. Downloaded the pc10img rom, downloaded the fastboot zip. Created a folder on my desktop named android and I put both files in there. I then extracted the fastboot zip and tried to open windows-fastboot exe which was in the zip but all I get is a black screen that opens and closes within 2 seconds. I also tried going to start->run->cmd and trying the last 3 points from pauls site and I get a unsupported command error in cmd terminal in windows. I'm using windows wista 32 bit ( if that matters ). Any ideas fellas? Your help is much appreciated.
[G2/HTC Vision]
Install update without wiping anything
Download zip file then rename it to update.zip and place in root of sdcard
Hold volume down and power then select recovery
Select install update.zip
Once completed your phone will reboot and after it turns on you will get notification saying congratulations you updated phone.
Notice that all your apps and settings remained in tact.
Worked for me.
Sent from my T-Mobile G2 using XDA App
Sent from my T-Mobile G2 using XDA App
I can't just install the update it errors out because of google goggles. I used pauls app to remove it from the system. Now I need to restore the ORIGINAL google goggles that came with the phone via flashing back to stock. My issue is pauls fastboot method isn't working out for me.
[G2/HTC Vision]
You have to change directory to the folder you created on the desktop. Then it will work.
-------------------------------------
Sent via the XDA Tapatalk App
how I did it
I had the goggles removed....
I forgot my sync cable at work.... so I renamed the .zip file to pc10img.zip
put it on the root level of my sdcard (i.e. not in any folders). I used a MicroSD adapter.
Then powered up my G2/vision while holding the touch button.
Went to the bootloader and it did a file check and found the zip file and began reflashing then reset and finished.
I also had the update.zip in the same place and it went hands free. No problems.
I used appbrain to back up my apps. but thats me.
Cheers
Just tried this method. Now my g2 is stuck at a black screen with a phone and a green arrow after the OTA update was installed via bootloader..
I cant even boot back into recovery or anything from here....
i had the same problem with the black screen and the green indicator. run fastboot reboot when it completes the update. i removed goggles and used pauls method and everything works great. if its not working youre doing it wrong
luis86dr said:
I can't just install the update it errors out because of google goggles. I used pauls app to remove it from the system. Now I need to restore the ORIGINAL google goggles that came with the phone via flashing back to stock. My issue is pauls fastboot method isn't working out for me.
[G2/HTC Vision]
Click to expand...
Click to collapse
No need to make a thread for the question you asked in Paul's; I haven't had a chance to check the forums. I updated my instructions to reflect your issue, and made a response post to yours in that thread.
http://forum.xda-developers.com/showpost.php?p=8994286&postcount=19
luis86dr said:
Just tried this method. Now my g2 is stuck at a black screen with a phone and a green arrow after the OTA update was installed via bootloader..
I cant even boot back into recovery or anything from here....
Click to expand...
Click to collapse
Mine stayed at that screen for a while. Not sure if I caused it to finally go through, but a pressed a few random buttons on the outside after a while and it continued with the install.
Updated. THX for the info.
My phone stayed at that screen for about three minutes, rebooted itself, then finished the update. Just let is sit for a minute
Sent from my T-Mobile G2 using XDA App
E:Can't open /cache/recovery/command
Anybody else getting this error 'E:Can't open /cache/recovery/command' follwed by
--Install from sdcard...
Finding update package...
Opening update package...
Verifying update package...
E:failed to open /sdcard/udate.zip (No such file or directory)
'E:signature verification failed'
Installation aborted.
Only thing I did was use Paul's "Google Goggles" reverse via fastboot (pc)
Anybody have any ideas?
(Don't mind the signature...this was done on my T-Mobile G2 lol)
Thanks!
Make sure you have it named update noticed you had udate as the spelling. And if you did pauls way and reverted back to stock / wiped then you shouldn't have problems loading the update . Make sure its on the root of your sd card. Then update via bootloader.
[G2/HTC Vision]
dilfatx said:
Install update without wiping anything
Download zip file then rename it to update.zip and place in root of sdcard
Hold volume down and power then select recovery
Select install update.zip
Once completed your phone will reboot and after it turns on you will get notification saying congratulations you updated phone.
Notice that all your apps and settings remained in tact.
Worked for me.
Sent from my T-Mobile G2 using XDA App
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
im a total Noob, and I have read the instructions on putting back the original goggle goggles and im still a little scetchy on how to do it exactly, is there any chance of getting a video to walk us thru putting the original google goggles back on the phone. Thanks.
joemm said:
im a total Noob, and I have read the instructions on putting back the original goggle goggles and im still a little scetchy on how to do it exactly, is there any chance of getting a video to walk us thru putting the original google goggles back on the phone. Thanks.
Click to expand...
Click to collapse
Its not that hard, all you do is place the latest OTA update on your sd card, and rename it to update.zip. . .Its easier than it looks. Then you just boot into recovery, and flash it.
But we want to know what we do when we used the google goggles remover app
Sent from my T-Mobile G2 using XDA App
kingvaj23 said:
But we want to know what we do when we used the google goggles remover app
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
You have to reflash the stock ROM, meaning it erases everything, then you flash the ota on top. Paul has more infoat his site.
beaker133 said:
I had the goggles removed....
I forgot my sync cable at work.... so I renamed the .zip file to pc10img.zip
put it on the root level of my sdcard (i.e. not in any folders). I used a MicroSD adapter.
Then powered up my G2/vision while holding the touch button.
Went to the bootloader and it did a file check and found the zip file and began reflashing then reset and finished.
I also had the update.zip in the same place and it went hands free. No problems.
I used appbrain to back up my apps. but thats me.
Cheers
Click to expand...
Click to collapse
I did just this when I got home and it worked perfectly.
What if you don't want to do it manually?? Can we just wait for the ota??
Sent from my T-Mobile G2 using XDA App
franky1029 said:
I did just this when I got home and it worked perfectly.
Click to expand...
Click to collapse
i tried this and it doesnt seem to see the PC10IMG.zip on my sd card. Whemn i hold volume down and power it goes into fastboot and just sits there any thoughts?
Update: just tried it agian and if flashed a message across the screen that said "wrong Image" now its just sits in fastboot mode.
joemm said:
i tried this and it doesnt seem to see the PC10IMG.zip on my sd card. Whemn i hold volume down and power it goes into fastboot and just sits there any thoughts?
Update: just tried it agian and if flashed a message across the screen that said "wrong Image" now its just sits in fastboot mode.
Click to expand...
Click to collapse
You do realize you have to run the fastboot commands through adb. And that file has to be located where you have fastboot, or the sdk tools folder is.
Code:
fastboot flash zip PC10IMG.zip
I have rooted my HTC Aria which is currently running 2.1. I also have ClockWorkMod Recovery v2.5.0.1 and the liberated_aria_FR008_signed.zip ROM for attn1. But when I try to install the ROM is looks as if it is starting to install but then when it says installing or something like that it jumps back to the Recovery menu screen and does not seem as if it has installed it completely. So I have tried this couple times and have rebooted through recovery and it just starts up as a restored version of 2.1 that was originally on my phone. Not sure what I am doing wrong. It seems as if everyone does this with such ease. Please help.
hov215 said:
I have rooted my HTC Aria which is currently running 2.1. I also have ClockWorkMod Recovery v2.5.0.1 and the liberated_aria_FR008_signed.zip ROM for attn1. But when I try to install the ROM is looks as if it is starting to install but then when it says installing or something like that it jumps back to the Recovery menu screen and does not seem as if it has installed it completely. So I have tried this couple times and have rebooted through recovery and it just starts up as a restored version of 2.1 that was originally on my phone. Not sure what I am doing wrong. It seems as if everyone does this with such ease. Please help.
Click to expand...
Click to collapse
Number 1 mistake is booting into ClockworkMod with the USB cable connected. Disconnect the USB cable before you boot into ClockworkMod to flash the new ROM.
tpbklake said:
Number 1 mistake is booting into ClockworkMod with the USB cable connected. Disconnect the USB cable before you boot into ClockworkMod to flash the new ROM.
Click to expand...
Click to collapse
I have done that. USB was not attached to phone when booted into ClockworkMod. I just don't know why the ROM is not installing correctly. Anything else you can tell I may have done wrong?
hov215 said:
I have done that. USB was not attached to phone when booted into ClockworkMod. I just don't know why the ROM is not installing correctly. Anything else you can tell I may have done wrong?
Click to expand...
Click to collapse
You should make sure that you have a good download of the ROM by comparing the MD5 checksum of the zip file on your SD card with the MD5 checksum on the download page.
tpbklake said:
You should make sure that you have a good download of the ROM by comparing the MD5 checksum of the zip file on your SD card with the MD5 checksum on the download page.
Click to expand...
Click to collapse
Not sure how to do that.
hov215 said:
Not sure how to do that.
Click to expand...
Click to collapse
Did you download the ROM file to a PC and then copy it to the SD card? If so then here is a Windows version of md5sum that you can run and generate the MD5 checksum. Then compare that with the MD5 value this is on the download page. If the values don't match, then try downloading the ROM file again.
If you downloaded directly to the SD card, then you can make a "adb shell" connection and run the md5sum program on the phone to check the zip file.
tpbklake said:
Did you download the ROM file to a PC and then copy it to the SD card? If so then here is a Windows version of md5sum that you can run and generate the MD5 checksum. Then compare that with the MD5 value this is on the download page. If the values don't match, then try downloading the ROM file again.
If you downloaded directly to the SD card, then you can make a "adb shell" connection and run the md5sum program on the phone to check the zip file.
Click to expand...
Click to collapse
thanks. i am using a Mac and don't see any link or attachment with the program you are referring to.
hov215 said:
thanks. i am using a Mac and don't see any link or attachment with the program you are referring to.
Click to expand...
Click to collapse
Then it looks like Google will be your friend. I'm sure the Mac can generate MD5 checksums in some manner.
Anyway, so did you download to the Mac first and then copy it to the SD card or did you download it directly to the SD card?
tpbklake said:
Then it looks like Google will be your friend. I'm sure the Mac can generate MD5 checksums in some manner.
Anyway, so did you download to the Mac first and then copy it to the SD card or did you download it directly to the SD card?
Click to expand...
Click to collapse
downloaded to the Mac first and then .zipped it because my downloader auto-unzips files. then i dragged onto my SD card. Then unplugged USB and then booted into ClockWork Recovery. Did the restore and empty cache steps and attempted to install the Liberated ROM. It seems like it is installing but never seems to say complete. so then i reboot and it still goes to 2.1
i boot into recovery mode then i restore to factory settings, then i empty devlk cache which seems to not even run but just shoot back to the menu when i hit "YES". Then I go to install the ROM but it doesn't seem to be installing completely
hov215 said:
i boot into recovery mode then i restore to factory settings, then i empty devlk cache which seems to not even run but just shoot back to the menu when i hit "YES". Then I go to install the ROM but it doesn't seem to be installing completely
Click to expand...
Click to collapse
As it is installing, what is it displaying on the bottom of the screen?
Try downloading from your phone browser. It may be the whole, unzip /rezip process that's fuxing it up.
Sent from my Liberty using XDA App
tpbklake said:
As it is installing, what is it displaying on the bottom of the screen?
Click to expand...
Click to collapse
It says:
"Finding update package"
"Opening update package"
"Installing update..."
But it does all that really fast and then just goes back to the ClockWorkMod menu screen. Then I try and reboot and it is still 2.1
zervic said:
Try downloading from your phone browser. It may be the whole, unzip /rezip process that's fuxing it up.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
hov215 said:
It says:
"Finding update package"
"Opening update package"
"Installing update..."
But it does all that really fast and then just goes back to the ClockWorkMod menu screen. Then I try and reboot and it is still 2.1
Click to expand...
Click to collapse
You are selecting the "choose zip from sdcard" in ClockworkMod, right?
tpbklake said:
You are selecting the "choose zip from sdcard" in ClockworkMod, right?
Click to expand...
Click to collapse
Yes, I am trying to download directly from browser to the SD Card this time and see if that works.
zervic said:
Try downloading from your phone browser. It may be the whole, unzip /rezip process that's fuxing it up.
Sent from my Liberty using XDA App
Click to expand...
Click to collapse
Thank you so much!!! That was it! I downloaded the .zip file straight from my phone's browser to my SD Card and installed via recovery mode and it worked perfectly. Now running 2.2 perfectly.
You are a genius to walk me through that.
hov215 said:
Thank you so much!!! That was it! I downloaded the .zip file straight from my phone's browser to my SD Card and installed via recovery mode and it worked perfectly. Now running 2.2 perfectly.
You are a genius to walk me through that.
Click to expand...
Click to collapse
Make sure tto thank Blake too lol if he didn't ask everything he asked (which I would have asked if he didn't) I wouldn't have been able tto suggest that glad to see you got it workin
Sent from my Liberty using XDA App
Does that ROM have the HTC sense with the active weather??
Sent from my HTC Liberty using XDA App
I have done everything except flash the rom cause I want to make sure its running HTC sense, does anyone know???
Sent from my HTC Liberty using XDA App
hawk8509 said:
I have done everything except flash the rom cause I want to make sure its running HTC sense, does anyone know???
Sent from my HTC Liberty using XDA App
Click to expand...
Click to collapse
Yes it does. Its liberated froyo.
Sent from my Liberty using XDA App
As I was running the P.A.C. Man ROM with nightlies, I installed the most recent update at the time, the "pac_mako-nightly-20130722.zip". I have been dirty flashing all the nightlies without any problems, until this morning. I installed the new nightly from TWRP, then wiped the dalvik and cache, and then rebooted the system, but when the phone started up again, I got an SD card error - I cannot view any of the contents of my SD card from ES File Explorer or anything and I cannot open or find any of them (picture, music, etc.) from anywhere.
From the file manager in TWRP, I can see that all the files are still there, but the SD card that is been seen everywhere else is a completely different one. If I plug my phone into my computer, the SD card shows up as a "generic hierarchical" with no contents.
Another thing, I cannot access the internet in anyway anymore. The wifi is stuck on "Turning wifi on..." and my SIM card is getting no response ("No Service") - if I remove my SIM card, my phone doesn't do anything either.
I already tried a factory reset to no avail. Nothing I do is working and right now my phone is pretty much stuck in a state of uselessness. I can start it up and it will load normally, but once loaded, there are errors - wifi stuck on "Turning on," no service, SD card is unreadable, and I can't transfer any files from my computer to my phone because it shows up as a "generic hierarchical" SD card.
What do I do?
Wipe system, data, cache and dalvik. Start fresh, reflash ROM. Might help.
Sent from my Nexus 4 using Tapatalk 4 Beta
ridikolous said:
Wipe system, data, cache and dalvik. Start fresh, reflash ROM. Might help.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I've done all of that twice now, but still it doesn't work.
Try a different ROM. Or return your phone back to stock. There is a guide somewhere.
Sent from my Nexus 4 using Tapatalk 4 Beta
roll back to earlier nightly. 721 cm side issues
ziddey said:
roll back to earlier nightly. 721 cm side issues
Click to expand...
Click to collapse
How can I do that?
NexusAndroid4 said:
How can I do that?
Click to expand...
Click to collapse
adb push or sideload an earlier ROM zip to your phone, or restore your backup.
NexusAndroid4 said:
How can I do that?
Click to expand...
Click to collapse
by flashing an older nightly...?
ziddey said:
by flashing an older nightly...?
Click to expand...
Click to collapse
I deleted my old nightlies to clear up space on my SD card... Does that ruin everything?
NexusAndroid4 said:
I deleted my old nightlies to clear up space on my SD card... Does that ruin everything?
Click to expand...
Click to collapse
No, adb push or adb sideload a different ROM zip, done.
NexusAndroid4 said:
I deleted my old nightlies to clear up space on my SD card... Does that ruin everything?
Click to expand...
Click to collapse
time to buy a new phone
CMNein said:
No, adb push or adb sideload a different ROM zip, done.
Click to expand...
Click to collapse
I downloaded the 07/21 file and the sdk. I'm trying to adb sideload in TWRP but I get the error:device not found - adb devices lists no serial number in TWRP. My device's serial number shows up in the Android OS but not in TWRP. What do I do?
Install the adb drivers again with your phone in recovery and connected and try again.
Sent from my Nexus 4 using Tapatalk 4 Beta
CMNein said:
Install the adb drivers again with your phone in recovery and connected and try again.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I believe I've done this reinstalling and it still failed, but could you tell me how?
NexusAndroid4 said:
I believe I've done this reinstalling and it still failed, but could you tell me how?
Click to expand...
Click to collapse
How to install the drivers?
Check if anything is showing up under your cpu's device manager when your phone is connected in recovery. Right click on that device, go to driver tab, select update driver, and then select the path to where you put the drivers you DL'd.
CMNein said:
How to install the drivers?
Check if anything is showing up under your cpu's device manager when your phone is connected in recovery. Right click on that device, go to driver tab, select update driver, and then select the path to where you put the drivers you DL'd.
Click to expand...
Click to collapse
In Device Manager, my phone shows up as "mako." When I try to update from the path of the AndroidSDK in recovery mode, I get an error.
You're pointing it all the way to the sub folder the drivers are in? It's extras/Google/USB drivers or something similar.
Sent from my Nexus 4 using Tapatalk 4 Beta
CMNein said:
You're pointing it all the way to the sub folder the drivers are in? It's extras/Google/USB drivers or something similar.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yes:
C:\...\sdk\extras\google\usb_driver
NexusAndroid4 said:
Yes:
C:\...\sdk\extras\google\usb_driver
Click to expand...
Click to collapse
When your phone is booted is it showing up as "online" or "offline" when you do adb devices?
How old are the drivers you have? Might have to update them. The SE Linux code that broke wireless, etc... didn't affect adb. You're just going to have to mess around until you can get your cpu to recognize your phone while you're in recovery. That's all I got.
CMNein said:
When your phone is booted is it showing up as "online" or "offline" when you do adb devices?
How old are the drivers you have? Might have to update them. The SE Linux code that broke wireless, etc... didn't affect adb. You're just going to have to mess around until you can get your cpu to recognize your phone while you're in recovery. That's all I got.
Click to expand...
Click to collapse
Nothing shows up at all with adb devices. When I do adb devices in the normal Android OS, it works, but not in recovery. I installed the SDK today so that shouldn't be the problem.
Hi, i'm trying to root my 2.3.5 u88oo. Im using es file explorer. i copy the image file, i go to image folder on fone, i try to paste image over image, but it says it fails. Same with CWM recovery file.
How can i get round this please?
Pete
whaaat!??
pete30nz said:
Hi, i'm trying to root my 2.3.5 u88oo. Im using es file explorer. i copy the image file, i go to image folder on fone, i try to paste image over image, but it says it fails. Same with CWM recovery file.
How can i get round this please?
Pete
Click to expand...
Click to collapse
dude.. what method are you following? where did you find out about this??
pete30nz said:
Hi, i'm trying to root my 2.3.5 u88oo. Im using es file explorer. i copy the image file, i go to image folder on fone, i try to paste image over image, but it says it fails. Same with CWM recovery file.
How can i get round this please?
Pete
Click to expand...
Click to collapse
You need to connect your phone to your computer in the pink screen and then change the boot.img file.
To do so - switch off your phone, then hold the volume up and down keys and power on your phone.
You'll get the pink screen. Connect it to your computer and change the image file.
hkej said:
You need to connect your phone to your computer in the pink screen and then change the boot.img file.
To do so - switch off your phone, then hold the volume up and down keys and power on your phone.
You'll get the pink screen. Connect it to your computer and change the image file.
Click to expand...
Click to collapse
yup spot on! try this it works!.. i was a bit alarmed to read what you did before..
hkej said:
You need to connect your phone to your computer in the pink screen and then change the boot.img file.
To do so - switch off your phone, then hold the volume up and down keys and power on your phone.
You'll get the pink screen. Connect it to your computer and change the image file.
Click to expand...
Click to collapse
Hey people, i can connect phone in pink screen on 2.3.5, but it wont give me the image folder. Only 2.2 lets me see the image folder with pink screen.
Im wondering how else to root 2.3.5 on u88oo.?
pete30nz said:
Hey people, i can connect phone in pink screen on 2.3.5, but it wont give me the image folder. Only 2.2 lets me see the image folder with pink screen.
Im wondering how else to root 2.3.5 on u88oo.?
Click to expand...
Click to collapse
If you are getting the pink screen, then you should get the image folder as well.
Try using another computer.
I've rooted my phone the same way while using 2.3.5.
Sent from my U8800 using xda app-developers app
hkej said:
If you are getting the pink screen, then you should get the image folder as well.
Try using another computer.
I've rooted my phone the same way while using 2.3.5.
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
I'm wondering if there is a specific version of 2.3.5, ? What version do you use?
pete30nz said:
I'm wondering if there is a specific version of 2.3.5, ? What version do you use?
Click to expand...
Click to collapse
There are different versions depending on where you live, but that shouldn't matter.
My version was U8800 V100R001C00B136SP03CUSTC151D002.
Anyway, try the pink screen method again.
You have the drivers installed, right? If not, then make sure you install them.
Get into the pink screen and then connect your phone to your PC.
Sent from my U8800 using xda app-developers app
hkej said:
There are different versions depending on where you live, but that shouldn't matter.
My version was U8800 V100R001C00B136SP03CUSTC151D002.
Anyway, try the pink screen method again.
You have the drivers installed, right? If not, then make sure you install them.
Get into the pink screen and then connect your phone to your PC.
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
I think i have the drivers installed. But could you please walk me through the install process. As rooting 2.3.5 with the pink screen has never worked.
When i plug usb in, and phone is in pink screen, usb sounds three times, not twice like it normally would.....
I rooted my u8800 (2.3.5) with super OneClick.
Sent from my U8800 using xda app-developers app
k87a521 said:
I rooted my u8800 (2.3.5) with super OneClick.
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
Same, just enable logging in hidden menu and its so easy
Sent from my U8800 using xda app-developers app
pete30nz said:
I think i have the drivers installed. But could you please walk me through the install process. As rooting 2.3.5 with the pink screen has never worked.
When i plug usb in, and phone is in pink screen, usb sounds three times, not twice like it normally would.....
Click to expand...
Click to collapse
Did you turn your USB debugging on?
If not, turn it on and then give it a try.
Else use super one click.
Sent from my U8800 using xda app-developers app
i've had the same problem as you, when i used the pink screen, the Internal memory didn't show up and SuperOneClick didn't work for me neither, i just went with Doomlord worked like a charm.
here's the link and i hope you find this helpful ^_^
http://forum.xda-developers.com/showthread.php?t=1321582
PS: installing CWM isn't rooting its something you can only do after rooting and you'll need something like "remount" to make the img file RW(re-writable) and then use the ES explorer to over-write the old recovery file with CWM
SKELLUP said:
Same, just enable logging in hidden menu and its so easy
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1420728
here is detail step.
k87a521 said:
http://forum.xda-developers.com/showthread.php?t=1420728
here is detail step.
Click to expand...
Click to collapse
Hi people,
Still not rooted. Nothing is working for me at all. superoneclick, doomlord, nothing...
Log was turned on, debugging was on as well, also unknown sourses.
I don't know what to do now?
pete30nz said:
Hi people,
Still not rooted. Nothing is working for me at all. superoneclick, doomlord, nothing...
Log was turned on, debugging was on as well, also unknown sourses.
I don't know what to do now?
Click to expand...
Click to collapse
try TWRP 2.6
i instaled it on non rooted device and when i had to reboot it askd do i wanna root it i clickd no and it rebooted but one time i missclickd on yes and its done dunno even when . ;D
Wicio0 said:
try TWRP 2.6
i instaled it on non rooted device and when i had to reboot it askd do i wanna root it i clickd no and it rebooted but one time i missclickd on yes and its done dunno even when . ;D
Click to expand...
Click to collapse
Can you please guide me, how to install twrp on my u88oo please?
pete30nz said:
Can you please guide me, how to install twrp on my u88oo please?
Click to expand...
Click to collapse
sure, i used forumber2 advices (again thanks Bro)
http://code.google.com/p/forumber-projects-for-u8800/downloads/list
here u have twrp
http://code.google.com/p/forumber-p...name=recovery_TWRPv2.6.0.0_u8800.img&can=2&q=
ill pass u over post he gave me
"You need install B518 first. After you install B518, you can follow my instruction;
1- Delete any "dload" folder from sd card and internal storage.
2- Turn off your phone,then turn it on with volume up and down buttons. The pink screen will appear, connect it to PC
3- delete recovery.img file in image folder. Then, copy the downloaded recovery image and rename it to recovery.img
Pull out the battery for turn off the phone. Turn on phone with volume up button for access recovery. "
Flashed clean rom 1.0 today, running great. But the debug icon does not show when in debug mode. ADB shows devices. All seems good. It used to show when running stock rooted. Ant body else see this?
millerthyme59 said:
Flashed clean rom 1.0 today, running great. But the debug icon does not show when in debug mode. ADB shows devices. All seems good. It used to show when running stock rooted. Ant body else see this?
Click to expand...
Click to collapse
I made the ROM so it wont show.
If you need it to show delete the following line from the build prop
Code:
persist.adb.notify=0
Thanks scrosler for the reply. As ADB was working I wasn't to worried. Your work seems top notch. Loving the ROM.
Sent from my VS980 4G
Help?
How did you install the rom? Im new to the whole rooting game but i did get very far until i got to a point where i am confused.
First off i already rooted my g2 and installed twrp so i got the hard parts done.
Secondly i downloaded this rom already and transferred it onto my phone, when i go to recovery mode i can see my folder i made which is called ROM and when i click on it a whole bunch of things pop up.
So what im trying to ask is what do select once I'm in recovery and in my folder?
Sent from my VS980 4G[/QUOTE]
Is there a zip file named VZW - CleanROM-1.0, that's the zip file you want to flash.
Sent from my VS980 4G
On my computer there is? Like when i downloaded it, it was in a zip file and than i extracted it into a ROM folder? Like all the files were extracted into a folder... Can you just tell me what to do from scratch? I can just delete it off my phone and retransfer it from my computer or sometihng? Sorry im just very confused and do not want to brick my phone?
Sent from my VS980 4G[/QUOTE]
Just transfer the zip file to your phone. Don't extract it. Then just flash in recovery. Do a full wipe, flash, then be patient and let it load. It takes a little bit. Does that make sense?
Sent from my VS980 4G
tony7497 said:
On my computer there is? Like when i downloaded it, it was in a zip file and than i extracted it into a ROM folder? Like all the files were extracted into a folder... Can you just tell me what to do from scratch? I can just delete it off my phone and retransfer it from my computer or sometihng? Sorry im just very confused and do not want to brick my phone?
Sent from my VS980 4G
Click to expand...
Click to collapse
[/QUOTE]
Look at this link in XDA. Follow the instructions. Very easy!
http://forum.xda-developers.com/showthread.php?t=2457514