Is my kindle fire bricked? Please help - Kindle Fire General

Hi all, I plugged my CM7 modded fire to a new PC for charging. Then suddenly my fire froze and went black. I can't turn it back on, no matter how long I hold down the power button. I got nothing.
I plugged my fire to my PC and the firefirefire logo (the yellow triangle one) shows up and it keeps looping back to it. My pc doesn't recognize the fire so I cant perform the unbrick trick.
Can someone help? Many thanks!

the kf won't charge with pc - use the wallcharger for some hours

b63 said:
the kf won't charge with pc - use the wallcharger for some hours
Click to expand...
Click to collapse
It charges, but it's not fast

right - it takes endless ...

b63 said:
right - it takes endless ...
Click to expand...
Click to collapse
I charged my KF overnight with USB from my Mac. Rougly 7 hours of charging whilst the device was sleeping. Went from 10% to a mere 80%.

The AC charger that comes with the KF is 1.8amp vs a PC typical USB of 0.5 to 1amp.
Many PC's won't properly charge the KF as a result.

so it's more like my KF is out of juice?

If you get no results after charging you will need to do a restore
Sent from my LG-P999 using xda premium

ok thanks, I'll report back after a few hours of charging

I know this did not happen to you,but if you were stuck on the yellow triangle you would do this
1.Download kindle fire utility 2.
Unzip kindle fire utility
3.To install the driver,its easy,just plug in your kindle, when it pops up with the install wizard say pick from the location of: KindleFireUtility>drivers>kindle
4.run kindle fire utility,select 1 then select 1 again
That's it, hope it helps someone like me

Related

[Q] Can not start my kindle fire after bettery run out!rom:ICS beta!

I am really careless to completely run out bettery of my kindle fire!NOW I can not start my kindle fire any more ,even I use my usb charger my kindle is just dead!Please help me!
Are you sure it's dead? Sometimes my Fire won't turn on, but I found out if I hold the power button for 30secs it will. I have no idea why, but it works.
nametaken798 said:
Are you sure it's dead? Sometimes my Fire won't turn on, but I found out if I hold the power button for 30secs it will. I have no idea why, but it works.
Click to expand...
Click to collapse
Thanks!the point is that I can not charge my kindle!there is no power signal!I could go crazy!
i assume you'r using the wall charger - the kf will not load (enough) on a usb port
That's a really right assumption! After I used my original charger that did not help!I assume that's the cold weather and over discharge which affect the normal working about Lithium battery of kindle fire ! I am thinking about changing the battery!Reply for b63,I don't know why I can not directly reply for him just like the last one!
did you try to power it completly off by holding the power button ~30 sec ?
then plug to wall charger without powering on - the orange light should come up
maybe that restores normal loading behavior ...
Thanks you b63 for paying close attention to my problem very much!The stupid problem still persists!I gonna be crazy!!!Whether I can change another kindle from amazon or change the battery !!!
did you try it with an other charger ? maybe the charger is dead - you can use every usb charger with your usb cable.
if it's not the charger i would recommend to change the device - i doubt changing only the battery will help
also i'm pretty shure you will break some of the plastic clamps if you open it
Mine did this once before no matter what I did couldn't get it to power on. No idea why this happens but it does. I'm in cm7 but is still counts as a rom. What I did to get it to power on was just leaving the kindle alone for like 2 or so hours. Then I connected it to the charger and powered it in. Can't promise it'll fix it. Question for you. Does the led inn the power bottom light up at all when charging? if all else fails you could open the back (theses videos out there so toy can do it right) disconnect the Batt. There's a no wires to solder. Just a connecter. that could work.
For the tl;dr version.
Happend to me. Rough to fix some times
Sent from my Kindle Fire using xda premium

Hellllppp kindle fire stuck on yellow traingle and keeps turning on and off

My kindle is stuck on the Yellow Triangle and When i Plug it into the computer (win 7) all it does is turn on and off and so the computer cant recognize it . please help please
Your battery is dead. Plug it into the wall and let it charge for 30 mins to an hour and it will boot right back up. Happened to me recently and I freaked out too lol
Sent from my Kindle Fire using XDA
If a wall charger doesnt work you will need a factory cable

[Q] Pls help me unbrick my KF!!

I installed Go Launcher HD onto my KF and after that the device's performance became very lagged. So, I shut down the device in order to restart it. And when I turn on the device, Kindle Fire logo appeared and then the screen went black. After that, I cannot turn on the device as nothing appears (even the orange-color power button light.) When charging, the device becomes hot (which I think it's charging correctly.) But when connecting to PC, nothing comes up (again, even power button light) and the device manager cannot detect the device's plugged in. That's why I cannot try unbricking my KF with other unbricking softwares out there as it cannot be detected on PC. Please help me how to solve the problem.. (already tried pressing power button for 20sec but nothing happened)
Firmware is 6.2.2.something and it's already rooted
Please..
Thanks a lott!!
Uninstall and delete your drivers
Find and reinstall new drivers.
Use command prompt and fastboot to change bootmode to 4000
Reboot
Get rid of KFU
Sent from my Amazon Kindle Fire using xda premium
I installed the driver using the one from KFU.. and when using cmd, the message keep saying "No device found" although I connected to the PC.. =(
plss...
Did you uninstall then reinstall your drivers?
Sent from my Amazon Kindle Fire using xda premium
yep, bro! I just tried... nothing's happened.. the PC still can't see the device attached.. Also, even power button is not showing orange color..
Make sure you have a good charge on the device. You may have to leave it plugged in for a day to make sure. Afterwards, if you aren't able to get your screen to turn on, your next step would probably be to get a factory programming cable.
If you are able to turn the device on then it's probably just a matter of issuing the appropriate commands.
Sent from my Amazon Kindle Fire using xda premium
Try This
I had something very similar happen to me the other night. I couldn't power on the device. Nothing would see the device......computer or wall charger. I didn't have a green or orange power light either.
I held the power button in for 30 seconds. Let go and hit it again and it came back to life. Seems simple I know but it worked for me.
I did a good charge.. tried leaving charged for at least half a day (pretty enough amount of charging time.. I think) nothing comes up beside becoming hotter when charging and yes.. I did tried pressing the power button for 30 sec several times.. it really shows up nothing..
Btw, what's the factory programming cable, bro?
A factory programming cable provides power directly to the device instead of the battery and forces the device into fastboot mode. Your problem is that you are already in fastboot mode and if I'm not mistaken, the device will not charge in that mode.
The factory cable gives power to the device so you can issue fastboot commands to change the bootmode so you can charge it normally (among other things).
http://forum.xda-developers.com/showthread.php?p=24791016
Sent from my Amazon Kindle Fire using xda premium
So, please point me out.. should I try that one? cuz I'm from Asia and not okay to order that stuff.. should I really try with that one?
You have a couple of options, depending on how brave you are. You could make your own factory cable http://www.droidforums.net/forum/droid-labs/146492-how-why-make-your-own-motorola-factory-cable.html Or you could CAREFULY open your device and make a temporary connection between the number 4 and 5 pins of the USB port. By opening your device you stand a real chance of causing irreparable damage.
But I can't see a reason why you wouldn't be able to find a "Motorola style factory programming cable" somewhere in your area. Search the web, you might get lucky. I wouldn't suggest doing anything that would get you in trouble with your local government though.
Sent from my Amazon Kindle Fire using xda premium

[Q] Help, please! KF turns on and off when plugged into usb :(

I used KFU to root my KF (with v6.3) and somewhere in downloading the twrp, something went wrong. The next thing was that it asked to press any key to continue; when I did, the cmd prompt disappeared. I disconnected the KF after some time which was the biggest mistake. When I plugged it back in, win 7 cannot recognize it anymore. I tried to install device drivers but it couldnt get through to the device. I ran the Kindle Unbrick Utility v1.1 and it also couldn't find the device. Now, when I plug it in the usb, Windows recognizes it as Kindle but it turns on and off so fast.
I would appreciate any help, please!! Thank you.
Your battery is probably dead and USB doesn't provide enough power. Plug it into the wall charger for a while then fix your drivers/bootmode etc.
Sent from my Amazon Kindle Fire using xda premium
Thanks for replying, soupmagnet
I am charging my KF now just to see how it behaves when it should be fully charged. It seems to turn itself off when I take out the charger even after a few minutes of charging. I'll give it a few hours... I'm already missing my KF (

[GUIDE]New solution for the 5 second bootloop!(w/ NO TOOL)

Hi, i have never opened a new thread,
but this time i want to share my solution for the 5 second bootloop.
If your kindle fire is not turned on and it keeps showing yellow triangle and blinking when you try to charge, this is the solution for you.
I experienced same issue today and googled and search xda.
but i could not find any easy solution without other cable or tools.
I accidently? find this solution so it may not work on all cases and may be cause some other problem, but it worked fine for me.
Solution
1. Connect your kindle fire cable to the wall charger first, but
do not connect with KF yet.
2. hold the power button for 3seconds
(nothing will happen as it does not have enough power)
3. keep press the button and connect the kindle fire
4. done.
Even if the charger is connected, the KF will not turn on.
So the power is not wasted and the KF will be charged.
Leave it for at least 30mins.
and then turn it on
Congratulation! Your kindle fire is BACK.

Categories

Resources