Database Users

Best battery life kernel on sense rom?

Hey guys, in your opinion what gives the best battery life on a sense ROM like Mikshift? BC's 1.5GHz, 1.8GHZ or X99, Scary Kernel, ect. Just curious what some of your experiences are..

PaulB007 said:
Hey guys, in your opinion what gives the best battery life on a sense ROM like Mikshift? BC's 1.5GHz, 1.8GHZ or X99, Scary Kernel, ect. Just curious what some of your experiences are..
Click to expand...
Click to collapse
I have been running mikshift since the beta along with bcnice20 oc uv 1.5 kernel with amazing battery life, if I forget my charger I don't even worry the standby time of that set up is just amazing ran for 24 hours on wifi with about 5 hours of using the net,tapatalk and about 75 texts and was at 50% at 24 hours of being unplugged its the only setup ill run, sometimes ill throw the 1.8 on there just to show everyone I can go that high but its never needed. I run at 1516 max 368 min conservative with a screen off profile for 806 max and 368 min no complaints here at all!! Its actually the only setup I'm willing to run!
Sent from my PG06100 using Tapatalk

Go with the x99 kernel without changing any settings. Just flash and leave it alone. Easy 2 days like that
Sent from my PG06100 using Tapatalk

[Q] [Opinions] Undervolt Settings.

First off, I would like to apologize in advance in case a thread like this exist and I can't find it.. :/ (Search is down, tried Googling) also, if anyone believes this to be in the wrong forum.
ANYWAYS! This is intended to be a preference/opinions thread centering around your OC/UC and Undervolt settings. Feel free to post your current set-up in Voltage Control (or any app of the like) and what Kernel you are running! I wanted to start this to get an idea of what everyone else is setting their UV and CPU clocks to, and possibly give a few of them a try on my own device. :]
Personally all of my clock speeds are at their defaults except for 1000Mhz @ 1200mV. (-75mV). I am also rocking Genocide v1.0 and getting a decent 30hrs of battery life with pretty moderate use.
Post away!

It is kind of pointless since every phone is different so cannot do exactly the same as others. Most can't do 1.4Ghz and most don't wake from sleep at 100 Mhz. All depends what you use your phone for. Mine runs fine at 1.3Ghz except for some TV apps will freeze.
Do you BONSAI?

kennyglass123 said:
It is kind of pointless since every phone is different so cannot do exactly the same as others. Most can't do 1.4Ghz and most don't wake from sleep at 100 Mhz. All depends what you use your phone for. Mine runs fine at 1.3Ghz except for some TV apps will freeze.
Do you BONSAI?
Click to expand...
Click to collapse
I believe that would be my point however.. curious as to what other people are running as far as cpu and voltage is concerned. Their success and failures. What people can get away with and remain stable. I, and others, could then try their setup (taking precautions of course; ie Nandroid backup.) And see what we get. Who knows, maybe I might adapt a set up that runs better on my device than my current one.
Sent from my SPH-D700 using XDA Premium App

Yes, every phone is different, but that is just more of a reason to collect data - perhaps a baseline can be established, which would be helpful in determining if a particular phone is messed up or just at the low end of the scale. Right now it is hard to determine if a particular phone's troubles are caused by low quality or by damaged hardware.
I keep all voltages at stock, and don't use any OC - my phone runs fine as is, and the battery life actually seemed worse with UV (and my screen felt hot with the screen UV).
Sent from my SPH-D700 using XDA App

My phone wakes from 100 but won't do 1.4ghz for even a couple seconds before reboot but 1.3ghz lasts about 20 minutes before reboot and 1.2ghz is stable. As for undervolts it can handle -25 on 1.2ghz and -50 on 1 and 1.1ghz -50 on 800mhz and that's it otherwise becomes unstable and reboots. Battery life and performance seem to meet at 800mhz with a -50 undervolt games run smooth too and 12 hours of battery. Oddly enough benchmarks are consistantly higher on 1.12ghz than on 1.2ghz I wonder if I'm the only one?
Sent from my midnight rom 5.2 genocide 1.0 epic [email protected] using xda premium app

xopher.hunter said:
My phone wakes from 100 but won't do 1.4ghz for even a couple seconds before reboot but 1.3ghz lasts about 20 minutes before reboot and 1.2ghz is stable. As for undervolts it can handle -25 on 1.2ghz and -50 on 1 and 1.1ghz -50 on 800mhz and that's it otherwise becomes unstable and reboots. Battery life and performance seem to meet at 800mhz with a -50 undervolt games run smooth too and 12 hours of battery. Oddly enough benchmarks are consistantly higher on 1.12ghz than on 1.2ghz I wonder if I'm the only one?
Sent from my midnight rom 5.2 genocide 1.0 epic [email protected] using xda premium app
Click to expand...
Click to collapse
Just to throw it out there. Aggressive undervolts will do more harm than good to your battery life. By that, I mean you'll drain your battery even more.
Sent from my SPH-D700 using XDA Premium App

I can only use Genocide kernel to get 1.3ghz at stock voltage with since all the other choices are uv'd. My last two Epics were able to handle uv'd 1.4ghz by 50mV but I'm not really complaining as I think this is a new phone they gave me and not a refurb. I currently have 100-400 uv'd by 100mV, 600-1000 uv'd by 75mV and 1300 at stock.

My phone can handle 1.4 Ghz but only with the stock voltages. If I try to touch it even by 25mV it locks up.
Who all has enabled the 100Mhz step? I noticed when I did my phone went into Deep Sleep a lot less by a noticeable amount. Staying at 100Mhz a lot.

Always interesting to hear about all this theory behind the reasons for undervolting OC and UC, then to hear about the issues (at times extreme) some have. I would also like to know who uses the 100 step and if it is noticeably better on battery life than the 200? Unfortunately I am missing out on it if I am. Still running Genocide here, but with 1.0 at -50mv 800 @ -50 and 600 @ -25. Very stable and still at 30+ battery life. Having 1.0 down 75 made me nervous. although I hear people dropping it down -100mv successfully.
Sent from my SPH-D700 using XDA Premium App

Good tip about "aggressive UnderVolting"...didn't know that actually drains your battery more. Might explain why 6 hours into my day, my battery is down to 30% already!!! I had it set at 1120Mhz UV to 1175mV (Stock = 1300)...
So now I'm going to try 1200Mhz only UV by 50...see what my battery life is after this!

Custodian said:
Just to throw it out there. Aggressive undervolts will do more harm than good to your battery life. By that, I mean you'll drain your battery even more.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Can you explain how this is so? Is this based on any actual research, experimentation, or online documentation, or is this just your own opinion?
Unless your undervolt causes the CPU to hang (I've seen mine start to warm up when it's hung, until a battery pull), I don't understand how providing less voltage to the cpu will cause it to drain the battery faster.

If you change the voltage settings please don't blame the rom developers when you phone bricks...
Sent from Bonsai 7.1.3.1

I'm running Twilight Zone v 1.1.1 RC1-Hajime Taisho, Vision kernel v 1.2
SetCpu-1.450 max
-1.450 min
Quadrant-2377
Linpack-20.577
Voltage Control-1.450
Uv -100
Quadrant-2346
Linpack-21.495
I ran SetCpu, benchmarks, ran VC, benchmarks..... This Epic runs super fast, with no FC's or any other problems at all. I'm currently using VC with the uv-100. As far as excessive battery use, I have Mugen 3200 mah battery. This battery lasts all day in heavy use with no problem.
Sent from my SPH-D700 using XDA Premium App

What Kernel are you guys using on the lastest CM7?

How many .35 kernels are available? I'm only aware of Umaro's and the stock CM kernel. I'm trying to achieve better battery life, so what kernel are you guys using?
So far, using Umaro's, I'm getting regular battery life, nothing special. Haven't tried the stock CM kernel.
Are they any other undervolted kernels available?

durps said:
How many .35 kernels are available? I'm only aware of Umaro's and the stock CM kernel. I'm trying to achieve better battery life, so what kernel are you guys using?
So far, using Umaro's, I'm getting regular battery life, nothing special. Haven't tried the stock CM kernel.
Are they any other undervolted kernels available?
Click to expand...
Click to collapse
There aren't any others so far. Umaro's kernel is really good for battery life, however it's not up to date with the latest kanged nightly from yesterday.

Ahh, I see. Thanks for the info.
What cpu settings are you running?

durps said:
Ahh, I see. Thanks for the info.
What cpu settings are you running?
Click to expand...
Click to collapse
Right now I'm using a kanged nightly with the "stock" cpu settings of 245MHz min and 1024MHz max, but with the interactive governor. With Umaro's kernel I had at 245 min, 1017 max and the Smartass governor. The smartass is pretty good on battery.

u made all the right moves all i would do is dim screen and keep runnimg apps low.
pimped out g2

btw pyromod 2.0 345 ghz min 1405ghz max on smartass. i fully charge bout 1 a day
pimped out g2

Pershoot released his kernel the other day pretty nice and smooth
Sent from my HTC Vision using XDA App

Alright I'm sleepy so this will be in rambling form but...
I've tried Umaro's and I'm not sure if it was the undervolting (which I haven't looked into tweaking) but my phone kept stuttering no matter which governor I used. I was using Htcclay's Super CM7 1.8 with cpu set to 245/1113
I also used the stock kernel that's been on CM7 with no problems and average to good battery life (10-15 hours of active use: texting, browsing, few calls, and playing the occasional game)
Most recently I've used Pershoots which I had heard worked great. I myself love it. Almost same battery life as stock kernel but everything felt just a little bit smoother performance wise.
Here's a link to Pershoot's thread:http://forum.xda-developers.com/showthread.php?t=847672

The stock cm kernel in my opinion is finally good enough that it doesn't need changed. I have always flashed pershoots and occassionally others, but it truly does not need supplemented IMHO.
Sent from my HTC Vision using XDA Premium App

I'm using savaged zen, and I get around two days of battery on a charge, with normal use.
Min: 368 max: 768
Sent from my HTC Vision using XDA App

Using Pershoots latest kernel, have nothing but good things to say about his kernels. Always my go to kernel.

fedtemis said:
I'm using savaged zen, and I get around two days of battery on a charge, with normal use.
Min: 368 max: 768
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
You're running that on Vision? I can't seem to find it for our device.

Stock CM7 kernel here. I run 245/806 Interactive with automatic brightness. I've found that when wifi is on, keeping the cell radio @ 2G only works wonders. Wifi is set to sleep on screen off, but not when plugged in. 1 day 7 hours on this charge so far with 23% left. I would consider my use light to moderate.
HTC Vision (G2) - CM7 B95 w/AUS radio
Your is not short for you are, but you're is.|It's means it is and never ever anything else.|Pluralization by way of an apostrophe is always wrong!

durps said:
How many .35 kernels are available? I'm only aware of Umaro's and the stock CM kernel. I'm trying to achieve better battery life, so what kernel are you guys using?
So far, using Umaro's, I'm getting regular battery life, nothing special. Haven't tried the stock CM kernel.
Are they any other undervolted kernels available?
Click to expand...
Click to collapse
I'm wondering where can I download the Umaro's kernel. I check out his github (https://github.com/umaro/htc-kernel-msm7x30) only to find out that the source is available.

Safe Overclock Speeds?

I've read many threads where people say they have their G2 up around 1.5 and I'm just wondering what is considered a safe OC speed?
Some of the threads say there isn't much noticeable difference after 1.2, can any of you confirm this?
I'm on meXdroid right now and I've been keeping it at 1.2 but it gives me the option of going up to 1.516, so I'm wondering if there's any damage that might be done if I go with the max.

kingston73 said:
I've read many threads where people say they have their G2 up around 1.5 and I'm just wondering what is considered a safe OC speed?
Some of the threads say there isn't much noticeable difference after 1.2, can any of you confirm this?
I'm on meXdroid right now and I've been keeping it at 1.2 but it gives me the option of going up to 1.516, so I'm wondering if there's any damage that might be done if I go with the max.
Click to expand...
Click to collapse
I'm running CM7.1 at a max of 1.4 without any problems. Not sure there is such a thing as completely "safe" when overclocking, but I also read about many who are at 1.5 or higher. I did notice a slight improvement going from 1.2 to 1.4 on my phone, but nothing substantial.

its safe to oc at 1.5 the thing is you wont be gaining a lot of performance but you will be draining more juice

After 1.2 the only thing you get is more battery consuccion.
The safe way is keeping the cpu ondemand or conservative between 245 - 1200.
If you want safe battery you can use setcpu and make 2 profiles one in screen off (powersave 245-368) screen on (ondemand 245-1200).
Note: for miui screen off profile have to be (245-768) because (245-368) cause delay in incoming calls.
And remember always the scale depends what kernel you use.
I using now pershoot 2.6.35.14
Is good with battery life so i recommended to you.
I was using ILWT kernel v1.5.1, is more better on battery life but i notice some problems went i use maps.
I hope that help you
Sent from my HTC Vision using xda premium

Ive also looked into this quite a bit and most people say around 1200mhz is the sweet spot for battery and speed.

also overclocking depends on kernel

I've ran mine at 1.42 using Unity sense as a daily driver.

pedroflovera said:
After 1.2 the only thing you get is more battery consuccion.
The safe way is keeping the cpu ondemand or conservative between 245 - 1200.
If you want safe battery you can use setcpu and make 2 profiles one in screen off (powersave 245-368) screen on (ondemand 245-1200).
Note: for miui screen off profile have to be (245-768) because (245-368) cause delay in incoming calls.
And remember always the scale depends what kernel you use.
I using now pershoot 2.6.35.14
Is good with battery life so i recommended to you.
I was using ILWT kernel v1.5.1, is more better on battery life but i notice some problems went i use maps.
I hope that help you
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
The OP is using meXdroidmod which has "tweaKr" script so no need for set CPU and he also has option to adjust voltages and many other tweaks. MeXdroidmod is awesome!
To the OP, just keep it at 1.2 . Like others have mentioned...just wasting juice if any higher.
HTC Vision(G2), meXdroidmod Ghost Chili AIO ROM/ICS CM7 theme.

I have mine at 1.6Ghz set on performance screen on, 368-768 ondemand screen off. I'm a medium/light user and will have around 20-30% left when i plug it in at night.
The amount you can overclock while still maintaining decent battery life really depends on if you're a light/medium/heavy user - because the charge is only being rapidly drained while the screen is on (if you have a sensible screen off profile set up). Light users can afford to run at high speeds on performance govenors, heavy users should run at lower speeds with conservative governors.
As for how safe overclocking is i'm not completely sure what the limits are, but there are people who run their G2's at 2Ghz and get no problems... the biggest danger is probably heat damage to the phone, but the battery will fail before you get to temperatures that will damage the phone so i wouldn't worry about that. The other concern is reducing the life of the cpu, however the longest you will have a phone is around 2 years, and an overclocked cpu will still last far longer than this.
Hope I helped answer your question, I am running Miui btw.

I have a 2.7ghz kernel on cyanogen 7.1 and I call it the Turbo charged g2
Sent from my HTC Vision using XDA App

The maximum speed our G2 can go is 2.03 but if you want battery and spped i recommend setting it up in between 0.9 and 1.3
Hope it helps!

the 7x30 processors are designed to run up to 1.5 so basically it's not oc. and the Desire z/G2 come with underclocked kernels on stock

Currenty oc my dz to 1.5ghz. Can oc to 1.9ghz without any problem.
Sent from my HTC Vision using XDA App

lolocabra said:
the 7x30 processors are designed to run up to 1.5 so basically it's not oc. and the Desire z/G2 come with underclocked kernels on stock
Click to expand...
Click to collapse
seriously?! it can run 1.5ghz without burning the cpu??

Steven How said:
seriously?! it can run 1.5ghz without burning the cpu??
Click to expand...
Click to collapse
Yup, a lot of people are running 1.2 or 1.5 daily.
Sent from my T-Mobile G2 using XDA App

i always thought they took Desire's 1GHz cpu and put it underclocked in the dz... so i oc it to 1GHz...
—————
|RIROZIZO|
—————

Steven How said:
seriously?! it can run 1.5ghz without burning the cpu??
Click to expand...
Click to collapse
That's incorrect from what I've read the CPU the g2 has is a 800 stock its not underclocked or nothing that's how it came From HTC but its a 2nd Gen snapdragon and their for very recealient and efficient and their for can be overclocked .. and from what I have seen and read this CPU has been overclocked more then any other CPU on a phone ... its bad ass!
Oh yeah .. I'm running mine at 1.4max and .122min with ondemand on g-light 2.0.1 rom and no over heating
Sent from my T-Mobile G2 using XDA App

Wow,wat if I run at 384mhz-1.2ghz and the battery become pretty hot? :/
Sent from my HTC Vision using XDA App

andslide said:
I have a 2.7ghz kernel on cyanogen 7.1 and I call it the Turbo charged g2
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Mind give me the link to download the 2.7ghz kernel XD ?
Sent from my HTC Vision using XDA App

Safely ocing to 1.4 on my daily rom.
Sent from my HTC Vision using Tapatalk Pro with Swype

Undervolting the GT-N7000 for better Battery life

Hey there ,
so i wanted to share share my awsome Undervolting results with you
At first im running on Chasmodo's latest CM 10.1 i really appreciate his work ! I use the latest CM 10.1 Kernel.
With his rom and this voltages u find under this introduciton text i could get nearly a month with Standby time
(without doing anything , Wlan turned on , Data off) i attached a screenshot (29 Days and 5 Hours sorry for the German language)
Every day i plug my N7000 out from the Loading station its 5am on 3pm i lost 1%.
to change the Voltages i use SetCPU (full version)
1400 MHz
1200 mV (Stock: 1350mV)
1200 MHz
1100 mV (Stock: 1275mV)
1000 MHz
1000 mV (Stock: 1175mV)
800 MHz
925 mV (Stock: 1100mV)
500 MHz
900 mV (Stock 1000mV)
200 MHz
800 mV (Stock: 975mV)
So i dont know my Voltage group sorry guys , if this values are not working just go in 25mV steps lower from your stock voltage
until the CPU gets unstable or crashes than u know that u cant go lower just do this with every clocking !
I also used this voltages on XXLSC Ultimate Rom with the HydraCoreNirvana Kernel i had fantastic results too but not that good like i get with the Asylum CM 10.1.
PS: Just this Voltages wont give you very good Battery life if your Rom / Settings is/are eating your battery. If you get better results with
lower results (stable) just go ahead and post it but im sure this values are nearly the lowest stable u can get
Code:
Its [U]impossible [/U]to hard brick your device with Undervolting , you only could get a soft brick if you use (Set on Boot) and your voltages will crash your System after boot. thats easy to fix just after the phon booted up fast go into SuperSU and delete the root rights for your Undervolting tool.
Thanks for Reading and if i you liked this push the Thanks button =) !:victory:

Thanks man

I think you should say which Voltgroup (A, B or C) your note is. Because those freq are really low (I think too much low for my note, that's voltgroup B).
Do you remember which voltgroup has your note, when you installed hydracore kernel?

Better i would buy a spare battery rather than spoiling my devices performance. We arr not in 1000BC with no electricity. Sure every one can charge a spare and can switch it.
Sent from my GT-N7000 using xda app-developers app

Bad-Pixel said:
I think you should say which Voltgroup (A, B or C) your note is. Because those freq are really low (I think too much low for my note, that's voltgroup B).
Do you remember which voltgroup has your note, when you installed hydracore kernel?
Click to expand...
Click to collapse
Hey there i dont remember never looked at the Voltgroup sorry so there is no other way to view my Voltgroup ?
Btw just try the voltages without autostart and u will see if your system reboots or if it works if not just go in 25mV steps higher :highfive:
qazibasit said:
Better i would buy a spare battery rather than spoiling my devices performance. We arr not in 1000BC with no electricity. Sure every one can charge a spare and can switch it.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Why ?
I cant get your argument my performance is the same speed while im gaming browsing same performance than before .. no impact , drops .. a spare battery ? So what about i dont want to switch my battery ? there is no need for it my battery stays alive for atleast 2-3 days when im doing something with it .

how to do if i only have rom toolbox

SkyKer93 said:
Hey there i dont remember never looked at the Voltgroup sorry so there is no other way to view my Voltgroup ?
Btw just try the voltages without autostart and u will see if your system reboots or if it works if not just go in 25mV steps higher :highfive:
Click to expand...
Click to collapse
It's a feature of the hydracore kernel only I think, because its read a particular value (something about mainboard and/or cpu) and the kernel automatically apply dedicated undevolt values. You could see it in system information, where hydracore kernel is detected. Without it, I think you can't do anything :/
Anyway, sincerely I remember some time ago I tried to lower my already undervolted cpu voltages, and I got freezes. I will try to go lower a bit, hoping it will works. A very important thing, is not only the lower battery drain, but also the lower cpu temps.
ahhl said:
how to do if i only have rom toolbox
Click to expand...
Click to collapse
I bought rom toolbox full sometime ago, when there was sales. If I remember correctly, there is a section relative to the cpu control, but I don't remember if it was undervolting capable also. You should start to search it from there (I'm sorry, I don't have the app installed anymore, so I can't help you properly... In case, use voltage control app)
Sent from my GT-N7000 using xda premium

I dont think it has UV feature. Just CPU freq control

nokiamodeln91 said:
I dont think it has UV feature. Just CPU freq control
Click to expand...
Click to collapse
Yes, you're right, I just checked (installing my bought pro version) and it hasn't the uv features. Anyway, as I suggested, he can use voltage control (even if I don't know if his kernel support the uv/oc)
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
I dont think it has UV feature. Just CPU freq control
Click to expand...
Click to collapse
Bad-Pixel said:
Yes, you're right, I just checked (installing my bought pro version) and it hasn't the uv features. Anyway, as I suggested, he can use voltage control (even if I don't know if his kernel support the uv/oc)
Click to expand...
Click to collapse
What do you mean by Rom Toolbox doesn't have voltage control?
Tap kernel tweaks, then any frequency and you'll find a voltage slider in there.

chasmodo said:
What do you mean by Rom Toolbox doesn't have voltage control?
Tap kernel tweaks, then any frequency and you'll find a voltage slider in there.
Click to expand...
Click to collapse
Maybe it depend from the kernel I'm using now (philz 3.99 on BurtRom tw rom) but I can't able to do what you said. I checked on rom toolbox pro again, and I didn't see any uv feature. Just goverors/kernel tweaks (like vm or fs features) or profiles management... Nothing else.
Anyway I'm using tegrak ultimate app to Undervolt my cpu and gpu, and it works perfectly, so I don't miss so much that feature.
Sent from my GT-N7000 using xda premium

I don't know - I am not sure if Undervolting could hard-brick or damage the hardware but back then running GB roms I had undervolted FM Kernel and there was trrrr trrr trrr like sound from my Note.
Be careful.

I have to do a custom rom just to see if its all true....otherwise am not interested at all in undervolting my phone. Hope its true...
Sent from my GT-N7000 using xda app-developers app

Boy124 said:
I don't know - I am not sure if Undervolting could hard-brick or damage the hardware but back then running GB roms I had undervolted FM Kernel and there was trrrr trrr trrr like sound from my Note.
Be careful.
Click to expand...
Click to collapse
never had any problems and just logical cpus could brick if you give them too mutch voltage , if you give them less voltage the system only can crash your sound could have been beacuse it crashed so really u cant hard brick your device with undervolting ... maybe a softbrick if your unstable voltage settings are on autostart.
qazibasit said:
I have to do a custom rom just to see if its all true....otherwise am not interested at all in undervolting my phone. Hope its true...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
no need for a custom rom mate , you just need a custom kernel wich is able to uv for example HydraCoreNirvana
Bad-Pixel said:
Maybe it depend from the kernel I'm using now (philz 3.99 on BurtRom tw rom) but I can't able to do what you said. I checked on rom toolbox pro again, and I didn't see any uv feature. Just goverors/kernel tweaks (like vm or fs features) or profiles management... Nothing else.
Anyway I'm using tegrak ultimate app to Undervolt my cpu and gpu, and it works perfectly, so I don't miss so much that feature.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Hey there , you cant uv with Philz kernel just read his thread check his FAQ there hes writing that hes not supporting
oc/uv its just a repacked stock kernel
use HydraCoreNirvana but when you download the kernel check that its the OC version if not than you cant change your voltage like with Philz kernel.
:highfive:

SkyKer93 said:
Hey there , you cant uv with Philz kernel just read his thread check his FAQ there hes writing that hes not supporting
oc/uv its just a repacked stock kernel
use HydraCoreNirvana but when you download the kernel check that its the OC version if not than you cant change your voltage like with Philz kernel.
:highfive:
Click to expand...
Click to collapse
You can you can
Just use tegrak ultimate Overclock app. I bought it because I think it's the only who give you the possibility to Undervolt the gpu also. Initially, philz kernel wasn't supported, but now it is. I undervolted my cpu setting the values that I had using the hydracore kernel oc. And today I lowered them of another - 25mV also. Everything works nicely until now
Sent from my GT-N7000 using xda premium

qazibasit said:
Better i would buy a spare battery rather than spoiling my devices performance. We arr not in 1000BC with no electricity. Sure every one can charge a spare and can switch it.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Nice attitude you are showing there. Oh, there is plenty of power, let's waste.it! Really, that kind off attitude is definitely going to make the world a better place
What's more why do you think undervolting does influence the performance? It only influences the power consumtion and if you go too far it does render the phone unstable. But it certainly does not in-, or decrease the cpu's performance.
Sent from my revived Galaxy Note
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
Bad-Pixel said:
You can you can
Just use tegrak ultimate Overclock app. I bought it because I think it's the only who give you the possibility to Undervolt the gpu also. Initially, philz kernel wasn't supported, but now it is. I undervolted my cpu setting the values that I had using the hydracore kernel oc. And today I lowered them of another - 25mV also. Everything works nicely until now
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yep tegrak definitely does the trick with PhilZ kernels. I have been using it for at least 8 months now and my phone is undervolted too. Only the highest cpu state is overvolted because I overclocked it to 1552 MHz instead of 1400.
Sent from my revived Galaxy Note

I would love this kernel under ubls4 if it has a proper exfat support. Until this is not fixed like philz kernel, I can not test or try
Sent from my GT-N7000 using xda premium

altae said:
Nice attitude you are showing there. Oh, there is plenty of power, let's waste.it! Really, that kind off attitude is definitely going to make the world a better place
What's more why do you think undervolting does influence the performance? It only influences the power consumtion and if you go too far it does render the phone unstable. But it certainly does not in-, or decrease the cpu's performance.
Sent from my revived Galaxy Note
---------- Post added at 01:50 AM ---------- Previous post was at 01:45 AM ----------
Yep tegrak definitely does the trick with PhilZ kernels. I have been using it for at least 8 months now and my phone is undervolted too. Only the highest cpu state is overvolted because I overclocked it to 1552 MHz instead of 1400.
Sent from my revived Galaxy Note
Click to expand...
Click to collapse
Please explain why you overvolted AND overclocked the highest cpu state. Doesn't this shorten your batteries performance?

Did you changed cpu governor or something else (like screen off profile to reduce CPU) to achieve 1% battery loss at 3pm?
And was that with mobile data on?

jcbobeda said:
Please explain why you overvolted AND overclocked the highest cpu state. Doesn't this shorten your batteries performance?
Click to expand...
Click to collapse
I overcloked the highest cpu state from 1400 Mhz to 1552 Mhz because I want more performance. And because my phone became unstable with the 1552 Mhz and the standard voltage. So now my phone saves energy when the lower cpu states are active and it has a bit of extra power at the expense of battery life when it needs the most processing power. All in all that gives me better battery life than with stock settings and a snappier device when needed. For me this is the ideal solution.
Sent from my revived Galaxy Note