Related
New here but thought Id share my experience of completely replacing the housing for my 10 month old X1. It can be done - even by a non techy person like me!!
Basically the keyboard was worn where it rubbed duiring open / close movement, the cover over the camera lense was cracked and there was general wear and tear. Could have sent it back under warranty but it would have taken an age and they would have charged me for all but keyboard probably.
Instead I bough a complete housing for £22 from here http://cgi.ebay.co.uk/Original-x1-xperia-Housing-Cover-Case-Housing-UK-T6_W0QQitemZ390078842052QQcmdZViewItemQQptZUK_MobilePhones_MobilePhoneAccessories_MobilePhoneFascias_JN?hash=item5ad282c4c4&_trksid=p3286.c0.m14They say they are used but mine was immaculate. Apparrantly when someone returns a phone during the 14 day money back period the innards get removed and put in a new case ready for resale. This guy buys the old cases. A real bargain I think as others are priced in the £50+ bracket.
Second you will need to be near a computer when you do the deed. Instructional videos taking you through every stage can be found here
http://www.mygsmtube.com/category/Sonyericsson.html
You will also need to assemble some tools. You will allready have the special screwdriver needed for 2 of the screws in your phone (comes with your new case) but you will also need a small cross head watchamkers screw driver for all the rest. Additionaly I found that I used tweasers and a small pair of bull nose pliers. As I dont bite my nails lol, I managed to seperate the clip together casings using my thumbnail otherwise you will need a thin, stiff piece of plastic (they use what looks like a plectrum in vids) Finally and very importantly, you will need a workmat. Unlike on the video I discovered that things fall out of the phone when you take it apart and you definitely dont want them bouncing off a hard surface onto a floor never to be seen again!! I used a white towel for this.
Ok, I had to do mine twice before it was right so here are the reasons and I hope it means you will only have to go through it once!
1. When you take apart the back section of the phone buttons are likely to fall out / may not be present in new. Not sure which but found out camera button was missing only after I had completed reassembly!! No probs they just slot in and used one from the old case.
2. The little metal clips holding the battery cover in place can drop out. Watch out for these they are small and easily missed!
3. You have to pull apart a very small white electrical connection on the phone. Mine was very stubborn and in the end used the small bull nose pliers for better grip. It will come apart you just need to be firm and waggle it a bit!
4.When you take apart the front (screen) section of phone a small black rectangle of rubber falls out. Dont miss it as it keeps the optical joystick in place and gives it the push down springy effect. There is a similar shaped recess for it to fit in but I found that I had to make one side of it sticky in order for it to stay there during reassembley. After you finish assembling this bit check the joystick is properly in place and has that click feel - if not, that rubber pad is not right and you will need to re-do it.
5. Make sure you remove the speaker from the top part of the screen case (behind Sony Ericsson wording) from your old case and fit it in the new one. It just clips in and will come out with a little bit of gentle persausion and leverage. I didnt realise it was missing from my new case and panicked like mad when I couldnt hear anything on starting up!!
6. The most fiddely bit was attaching the ribon cable between the two parts. Take your time with this as you dont want to damage the connection by being too heavy handed. I discovered that the ribbon is longest when the phone is half closed/open. If you can keep it in that position you will have more ribbon to play with and it will be alot easier to lign the connection up.
Ok, the process isnt a walk in the park, I was nervous as hell doing mine (especially when it wasnt right the 1st time) but it wasnt half as bad as I thought so, it can be done....even by me lol!! and is well worth the effort - Good Luck
I have my case in a lil bad conditions and thought I would do the same as u did and change the case, but then I though I would wait a lil bit to get even worse, so that it'd be worth the hassle....
However since lately ma KeyBoard started going crazy, I decided to go with the video and open it to get some dust out....you won't believe it.....I got stuck at the very first step....can't remove the antenna cover, no matter what I do or use !!!
I replaced my housing to and i used this two movies on youtube. youre Instructional videos are removed by user so i wanted to post the youtube link. it is the same clip as yours i think.
http://www.youtube.com/watch?v=AWDurQrRt-Y
http://www.youtube.com/watch?v=iyGUbxFqvyc
I really need to clean up my keyboard, but it is so complicated to do that, that I'll whait until it stops responding and then I'll try. Some keys are not fully functioning good anymore (you have to press harder to get the symbol), which it turned out to be a common issue with X1's keyboard. There are some cracks in the case ofcourse.
So I suppose, sooner or later I'll follow your lead on this
There are infact 4 vids - 2 disassembly and 2 assembly. Iff you are like me you will need all 4 lol. They are still up on the site I linked to, you just need to scroll down the menu of vids at the bottom right to find the X1 vids. The advatage with this is thay are all in one place, but the original source is YouTube.
darkhalf520, I can believe it!! I almost gave up a couple of times. With the clip on bits, sometimes you need to be quite firm with them
Forgot to mention
Not sure if it was clear on original post, but the new housing came with a keyboard also - mention this as keyboard probs seem to be quite common.
Thanks man, I'm going to do this in about a year, Silver to Black son!!!
crank1... three posts only and I already love You man. thanks! I've just ordered black one for myself as well. this price is a bargain.
thelucius said:
I really need to clean up my keyboard, but it is so complicated to do that, that I'll whait until it stops responding and then I'll try. Some keys are not fully functioning good anymore (you have to press harder to get the symbol), which it turned out to be a common issue with X1's keyboard. There are some cracks in the case ofcourse.
So I suppose, sooner or later I'll follow your lead on this
Click to expand...
Click to collapse
I have the same problem like you. the space-bar doesn't work so good any more. a friend of mine lost his whole keyboard. but i don't think you can clean it you have to replace youre keyboard. i replaced mine xperia case and still the you have to press really hard for the space. i think the keyboard ""dies"" but i'm not sure. does more people have this problem??
and sorry Crank1 i looked at the wrong vids, My mistake
is the ebay selling original or oem? coz i saw 100% ORIGINAL xperia x1 HOUSING
14 DAY STOCK ------- GRADE A -------
Grade A mean oem?
from my understanding, OEM means Original, those cases for the 22lbs are real, just used... if you see fascia some other place then its possible it could be one from some other maker, fascias dont always fit either
spikegotti said:
from my understanding, OEM means Original, those cases for the 22lbs are real, just used... if you see fascia some other place then its possible it could be one from some other maker, fascias dont always fit either
Click to expand...
Click to collapse
Yes thats right, the cases are genuine & come from phones returned by customers under the 14 day returns policy that some retailers have. The Grade A refers to the quality / condition. As I said the one I got was mint.
I found this on cnn.cn for 79.99USD, any feedback for the site anyone? Should i get the used one or the new one? Is the new one worth it? thank you
just got mine, as op stated - almost perfect condition. I'll swap it as soon as my little curious son will go for his nap.
in the package I've got full unbranded black housing, including keyboard.
[EDIT]
all done and I am sooo damn impressed. the black one looks better imho. the only problem I had, was that those two covers for screws next to camera were not included, so I had to paint my old ones black. after that I've used some clear nail top coat polish from my wife's drawer and it looks brand spanking new.
thanks again for the heads up crank1.
No Problem bronx. Great to hear that all went well.
bronx said:
just got mine, as op stated - almost perfect condition. I'll swap it as soon as my little curious son will go for his nap.
in the package I've got full unbranded black housing, including keyboard.
[EDIT]
all done and I am sooo damn impressed. the black one looks better imho. the only problem I had, was that those two covers for screws next to camera were not included, so I had to paint my old ones black. after that I've used some clear nail top coat polish from my wife's drawer and it looks brand spanking new.
thanks again for the heads up crank1.
Click to expand...
Click to collapse
I maked my xperia also black. it is like you said it looks better and the same color problem with the two covers. but i have a hard case so this new Black wouldnt be damaged or get scratches.
Just changed mine from silver to black. looks the nutts , wasnt to tricky if u take ur time
instructions
Btw if anybody needs them there are Sony Ericsson's full disassembly and reassembly instructions at http://rapidshare.com/files/155696508/Guide_Working_Instructions_Mechanical_X1i.pdf.html . I found them much more useful than the video.
Still not for the fainthearted though. Bits have to be unstuck and restuck (some form of EM resistant tape) and the instructions leave you still with small bits of plastic stuck to the covers at the end. And now my earpiece buzzes most alarmingly. But I do have a fully chromed X1!
Also, attached is Sony Ericsson's software for testing all the features of X1, so that you can check everything works properly after you reassemble.
For those who replaced their X1 housing - How long did it take for the whole process?
Thanks!
So I was pretty careless and dropped my N1 in work, landing perfectly on it's screen It still functions perfectly and the AMOLED screen hasn't been damaged, simply the digitizer. I've already ordered a new one with all the tools necessary to replace it, but I'm yet to find any definitive guide on replacing the N1 digitizer.
I came across thread #751923 (Can't post links as I'm new) which seems really helpful but a guide with pictures/video would be awesome. There's a 45 step youtube vid on how to replace it as well but the quality/clarity isn't great. I'm sure I can use both of these to replace it just fine, It just seems a little daunting.
Basically I'm looking for consolation along the lines of 'It's damn easy to fix' Any love for a fellow N1-er?
It is easy to fix. Two tips: don't use metal spatulas to pry the plastic under the battery off and gently wiggle and push the motherboard out only after disconnecting all the little connectors on it.
Im also waiting on my digitizer. I'm going to folllow these 2 guides.
http://www.ifixit.com/Teardown/Nexus-One-Teardown/1654/1
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
Have done it and you actually found better tear-downs and tutorials. Use youtube as well. The videos help because they show the techniques as well. Hardest part i would have to say is sliding the motherboard out the bottom under the metal separator. I think it was great and taught me a lot about my phone. The thing you have to watch out for is dust and fingerprints under the screen. Once it's on...it's on, anything underneath is stuck lol. make sure it's all clean and you won't have any annoyances like dust particles like i have.
I did it, mostly successful. I damaged the cable to the trackball, so be careful at that step, otherwise nothing difficult, just takes an hour or so.
Cheers for the info and advice guys, should hopefully get my replacement digitizer tomorrow so I'll keep this thread updated with the outcome
I have replaced my digitizer. It cost me $45.00. It was challenging but not impossible. The hardest thing is not tearing any of the ribbons when dissasembling. It was a successful replacement. The only gripe I had was the digitizer I bought did not come with the adhesive to glue the digitizer to the frame. Make sure you have a way to attach the screen to the frame before you begin the process. Other than that it should be easy as long as you take your time.
Sent from my Nexus One using XDA App
I replaced mine.. it took a solid hour or so, just be very careful not to tear any of the ribbon cables.. everything is super small and delicate.
I now get lots of dust in the corners of my screen because i didn't seal the new digitizer properly, but its not a huge deal to me.
replacing the digitizer is easy... its taking apart, and putting the rest back together that sucks. just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.
nexusonemeover said:
just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.
Click to expand...
Click to collapse
haha reminds me of when I took my laptop apart to re apply thermalpaste. I ended up with 7 extra screws >.< But the thing was together and has been running fine for the last 6 months so O.O
I did it, not too bad if you go slow and deliberately. I also have dust under my screen now. I sort of wish I would have just sent it to HTC but the money saved is worth a little dust.
A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .
rob61280 said:
A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .
Click to expand...
Click to collapse
That's a great idea, rob. I always think whenever I take apart a phone that I should have a video camera handy to record what I'm doing so I can play it in reverse when I'm putting it back together
For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.
Well I eventually got my digitizer this morning. It took until I had everything taken apart to realise they had sent me a compatible but ill fitting digitizer. It doesn't even have the appropriate buttons (it did in the selling image) at the bottom. At this point everything works fine but it doesn't look perfect. I guess it'll have to do, thanks for the advice guys
omgdwong said:
For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.
Click to expand...
Click to collapse
Wow thats cheap, I just got quoted for around $300US to fix my phones screen.. not including labor.. argh
Does anyone know if HTC in america repair phones from the other side of the world even though they were purchased from google's store?
I just sent my phone into HTC to be repaired for a cracked screen expecting it to be $115 and was pleasantly surprised to find that it would only be $55 including shipping! HTC was also extremely quick to get back with me for the quote. I sent the phone out Tuesday at 4pm and they have looked at it and quoted me the repair cost by Wednesday at 2 pm.
I recently cracked my digitalizer as well.
I called HTC 2 times without giving any information about myself before calling a 3rd time to do the actual swap.
I was quoted at $115 for me to send in my N1, wait a week without a phone, and have them replace the digitalizer, before shipping it back.
I then further inquired and found out they have a Swap program where they mail you a new(refurbished, but perfect) phone, and a FedEx label, which they still quoted me $115 to fix the screen, and a possible $275 if they needed to replace the logicboard, but they would get a quote back to me with all the things they would need to replace. It would require a $529 charge to my card, incase i didnt send the phone back at all.
I mentioned that my camera was broken, as well as my trackball was loose, and he said the quote would include this as well.
I called back a 3rd time, requested a swap phone, and had one 2 days later.
i mailed my phone into HTC, and two days later i had my quote.
I paid $55 after it was said and done, and have a new (refurbished) phone
I was rooted,unlocked, and running Kang-O-Rama 1.0 when i shipped the phone in. I didnt bother to fix that.
Has there been a decent guide on taking the 4G apart yet? I've googled it but haven't been able to find anything yet.
kitsunisan said:
Has there been a decent guide on taking the 4G apart yet? I've googled it but haven't been able to find anything yet.
Click to expand...
Click to collapse
I cant fine one either but there are 2 screws in the battery compartment and it looks like the metal portion where the camera is may pop or peel off with a little force. My guess, try to remove metal portion where camera is, if it comes off and exposes screws remove those along with 2 in bat compartment then use tool to try and separate where bezel and rubber surround are. Just fumble it.
May I ask why your taking it apart?
Stupid reason really, I was going to see if the ffc could be centered better. Seems just about all of the MT4G phones have an off-centered camera, and wanted to see if I could move it back to center myself. I was just curious to see what was throwing it off.
I had the two screws off last night, but couldn't get anything to come off. Didn't want to force it and break anything, I was just hoping a teardown had been done showing what needed to be done.
kitsunisan said:
Stupid reason really, I was going to see if the ffc could be centered better. Seems just about all of the MT4G phones have an off-centered camera, and wanted to see if I could move it back to center myself. I was just curious to see what was throwing it off.
I had the two screws off last night, but couldn't get anything to come off. Didn't want to force it and break anything, I was just hoping a teardown had been done showing what needed to be done.
Click to expand...
Click to collapse
I don't think a phone exists that you dont have to pry, push, pull and force things to get them apart. There will ALWAYS be risk of breaking things when taking a phone apart. I would just deal with it and not open the phone. Plus, they usually have a way to tell if you've opened your phone so you will void your warranty.
There is a "void" sticker on one of the screws. If someone does open her up, check to see if you could replace the speaker with a better one from another phone.
Please post questions in Q&A section.
I'm curious to learn how to take the phone apart as well, because I'd like to figure out how to make the damn buttons stop squeaking & clicking so loudly (home/menu/back/genius). It's driving me insane and I'm already on my third MT4G.
dustrho said:
I'm curious to learn how to take the phone apart as well, because I'd like to figure out how to make the damn buttons stop squeaking & clicking so loudly (home/menu/back/genius). It's driving me insane and I'm already on my third MT4G.
Click to expand...
Click to collapse
Anyone? I'm now on my fourth MT4G and will be receiving a fifth one shortly (creaking buttons), and if I experience that same problem I'm thinking about trying to fix the damn thing myself.
damn still no tear down i need one buttons jammed
I tore one apart after I got pissed and threw it into the hardwood floor at full speed.
I don't remember the steps but I do remember there are a couple key points, including ribbons that have to be disconnected. The ribbon connector from the main display to the main board is junk and that, of all places, is where my tear down went south.
I've got 450.00 dollars sitting in pieces if anyone wants to see them.
Sent From My Rooted HTC Glacier- It Just Makes SENSE
pdxrealtor said:
I tore one apart after I got pissed and threw it into the hardwood floor at full speed.
I don't remember the steps but I do remember there are a couple key points, including ribbons that have to be disconnected. The ribbon connector from the main display to the main board is junk and that, of all places, is where my tear down went south.
I've got 450.00 dollars sitting in pieces if anyone wants to see them.
Sent From My Rooted HTC Glacier- It Just Makes SENSE
Click to expand...
Click to collapse
I'm looking to buy someones Part "Power Ribbon Cable Assembly" (The part thats connected to the power button) *BE CAREFULLY" Everything has to be in Working order and not torn! Send me photos of the part I'm looking for and price. [email protected] Thanks!
dustrho said:
Anyone? I'm now on my fourth MT4G and will be receiving a fifth one shortly (creaking buttons), and if I experience that same problem I'm thinking about trying to fix the damn thing myself.
Click to expand...
Click to collapse
You must never have had a MT3G. These buttons are a dream compared to the creaky clickers in that dog.
I bought a refurbished phone on Craigslist and there are fingerprints on the inside of the glass (I don't know why I never saw them when I was inspecting). Would like to teardown guide so I can go clean those prints off.
Lil bit of thread necromancy here, but did anybody ever find a teardown? I'm thinking of ripping mine open due to my backlight issue ( http://forum.xda-developers.com/showthread.php?t=958033 ). I guess if nobody else has a teardown, I'll have to brave the waters and post my own, but going in blind is going to increase the risk of me killing the thing even worse than it already is
I'm also preparing to replace my digitizer. I came across a couple recent tear-down videos:
http://forum.xda-developers.com/showthread.php?t=961252
http://www.repairsuniverse.com/htc-tmobile-mytouch-4g-take-apart-repair-guide.html
Good luck!
Phew. Just replaced my digitizer using the latter video. Putting it back together was fairly straight-forward by just following the video backwards, though a 'put back together' video would be convenient.
A couple minor caveats:
They skipped showing some phillips screws holding the motherboard in place (near the end). I think there were two of them. They're fairly obvious if you know to look for them.
I attempted to reuse the existing adhesive by reheating and applying pressure. This sort of worked, but the digitizer seems a tad loose. I don't think it's going to fall off, but it'd probably be better to remove the old adhesive and apply some fresh adhesive. Anyone know where to get a suitable adhesive?
Taking apart the MyTouch 4G is not that hard
I bought a used MyTouch 4G in pieces on Craigslist for $ 45 that had a broken digitizer (about $ 20 on eBay with free shipping) and LCD (about $ 40 on eBay with free shipping) and the Audio & Volume Button Flex Cable (about $ 38 on eBay with free shipping) was also defective (the power button cable was ripped which can happen very easily if you take the phone apart and if you are not 100% careful when you pry the power button cable out). I ordered all the replacement parts on eBay from US sellers.
This particular phone had the "bad", washed out screen and was manufactured in Taiwan. When I ordered the replacement LCD and digitizer, I was hoping to get the "good", bright and superior screen but that didn't happen. So for the ones out there who are hoping to improve the screen by replacing the LCD and/or digitizer, it's a 50/50 shot.
I also ran into the problem with the adhesive and found a roll of 3M 2mm double sided tape for $ 10 with free shipping on eBay. The phone is working great and looks like nothing ever happened now after I put it all back together. And even though I had to pay for a lot of replacement parts, it was still a lot cheaper than buying a new one from T-Mobile or a used one on Craigslist or eBay
There are also a lot of MyTouch 4G disassembly videos on youtube. I'm a gal and if I can do it, you can too !!
1wk review.
So here's a review vid of the springs i just installed. any questions, feel free to ask.
SPRINGS- http://www.mcmaster.com/#9001t14/=bjgjja
due to requests I have created a tutorial on how to install the spring.
PRT1&2-
I THINK IM THE FIRST TO POST A WHOLE TUTORIAL ON IT. BUT YEAH ANY QUESTIONS JUST ASK.
cheers for that matey
let us know in a few days how your getting on with it and how easy it is to do
That's awesome, a how to video would be incredible and I will definitely consider getting one of these springs
Those springs are excellent, good work man. A how to guide would be real cool.
how to tutorail is what you want, how to giude is what u get.
my screen is kinda wobbly when its closed, would this help with that?
Definitely, my screen was kind of wobbly with the stock spring. When I changed to this magnificant ultra-compression spring from my link above, my screen if as stiff as can be. My opinon get it.
hmmm...i want to do this, but im nervous that imma mess up the phone...looks simple enough, but i've never taken apart any electronic device
DaygosTommyT said:
hmmm...i want to do this, but im nervous that imma mess up the phone...looks simple enough, but i've never taken apart any electronic device
Click to expand...
Click to collapse
so have i, i was afraid at first, than i went balls out and did it.
Gosh this is ideal. My g2 unfortunately has a somewhat loose spring and this replacement doesn't look terribly difficult. If I might ask, where online did you get those blue separator tools? What size screwdrivers other than the #5 torx did you need?
astriaos said:
Gosh this is ideal. My g2 unfortunately has a somewhat loose spring and this replacement doesn't look terribly difficult. If I might ask, where online did you get those blue separator tools? What size screwdrivers other than the #5 torx did you need?
Click to expand...
Click to collapse
Looks like the ones I got from here:
http://www.repairsuniverse.com/tools.html
OP: Nice work on the vids brah! (digging the slight pidgin accent)
Im so tempted to replace the spring on my G2, just afraid that i might mess something up and have a useless paperweight.
You can get the pry tools on ebay, here is a link
http://cgi.ebay.com/5-Plastic-phone-LCD-Screen-Opening-Pry-Tool-Opener-FI5-/320661058081?pt=PDA_Accessories&hash=item4aa8e37221
Ordered my springs today, ill let ya know how the install goes
Sent from my HTC Vision using XDA Premium App
alright, ordered the tools and the springs, hopefully this goes ok
Alrighty well you got me. Ordered off for the torx, pry bars, and springs. I'll get a precision screwdriver set at a hardware store as I don't think my gunsmithing screwdriver kit tips are going to be fine enough. Also their magnetic field is going to be much greater and though I am fully aware of how much radiation the phone is frying my genitalia with, I don't want to accidentally magnetize some vital part.
I am surprised at how simple the inside of the g2 is. Components are logically placed and you have relatively easy access to all slots and screws. This install should be a snap.
If you don't mind me asking, what ultimately led you to discover that this was going to be the proper spring for your desired size and tensile strength?
Next step after install: Case testing.
I just bought the springs as well, although I went ahead and got one that has the 25lb spring rate. I didn't want to overstress the materials and the snap so it should be ok.
astriaos said:
Alrighty well you got me. Ordered off for the torx, pry bars, and springs. I'll get a precision screwdriver set at a hardware store as I don't think my gunsmithing screwdriver kit tips are going to be fine enough. Also their magnetic field is going to be much greater and though I am fully aware of how much radiation the phone is frying my genitalia with, I don't want to accidentally magnetize some vital part.
I am surprised at how simple the inside of the g2 is. Components are logically placed and you have relatively easy access to all slots and screws. This install should be a snap.
If you don't mind me asking, what ultimately led you to discover that this was going to be the proper spring for your desired size and tensile strength?
Next step after install: Case testing.
Click to expand...
Click to collapse
I find this the most proper spring, because many have posted that these springs on amazon are the best. Unfortunetly, the springs were sold out. So I googled the springs with the same dimension, and stumbled upon stainless-steel ultra-compression springs. Ultimately stronger, last longer, and leave you smiling with results.
astriaos said:
Gosh this is ideal. My g2 unfortunately has a somewhat loose spring and this replacement doesn't look terribly difficult. If I might ask, where online did you get those blue separator tools? What size screwdrivers other than the #5 torx did you need?
Click to expand...
Click to collapse
please dont go on any official webiste that cost $20 just for the essentials. I got my whole pry tool with both flatheag and phillips head for $1.99 on ebay. came to me in a week.
mputtr said:
I just bought the springs as well, although I went ahead and got one that has the 25lb spring rate. I didn't want to overstress the materials and the snap so it should be ok.
Click to expand...
Click to collapse
I ordered the same springs, i was debating between the 25lb spring rate or wait until smallparts.com had the their compression spring they were the same size but i realized the spring rate was 35lb. I also ordered some void stickers from ebay.
Great find on the springs. I know a bunch of G2 owners here that want their hinges replaced, so I bought 3 packs. Ordered my springs on Wednesday, they should be here Monday. I'll report back once they're here and installed. Did installing this spring fix your closed screen wobble by chance?
By the way, OP, there are a few other breakdown/reassembly vids out there, but yours is easily the best. Great vid. Very clear and easy to understand. Thanks a bunch.
Ok so my Nexus One got a few Dings and scratches nothing critical or crazy. but I'm really picky about my phones looking New so I invested on buying a N1 housing on ebay and I wanted to know any pointers from people that done this before. I do have some experience on changing housings but where I'm hesitant about taking apart the digitizer since its glued I believe to the middle part and people are just putting double sided tape to hold the thing together which in my opinion it doesn't last. So maybe you guys got better pointer than people I see on youtube and other blogs. Thanks
How would you source a new housing without spending at least $200, if you don't mind me asking?
I got my housing on ebay for 45.00 for battery door bottom part and the middle housing. Now if i brake anything inside it will cost me alot more than 200.00.
Sent from my Nexus One using XDA App
If you are just replacing the housing you do not have to do anything about the digitizer/lcd. You just pull it out of the old and put it in the new. I did this recently with my N1 and am very happy with my shiney new looking phone. There are plenty of videos on youtube to step you through the process just be patient and careful. The hardest part for me was the connectors for the docks in the bottom back plate.
Sent from my Nexus One
paperecho said:
If you are just replacing the housing you do not have to do anything about the digitizer/lcd. You just pull it out of the old and put it in the new. I did this recently with my N1 and am very happy with my shiney new looking phone. There are plenty of videos on youtube to step you through the process just be patient and careful. The hardest part for me was the connectors for the docks in the bottom back plate.
Sent from my Nexus One
Click to expand...
Click to collapse
You made my day! I was having a hard time finding a video to confirm that. most people replace the broken digitizer or they just disassemble the phone without taking the digitizer off. Now I'm just waiting for my housing to arrive from China.
the bottom cover part(not the battery door) was a little easier to take off than i expected but it was tough though. I used a pry tool like this http://www.accessorygeeks.com/pry-tool-plastic-case-bu.html
Highly suggest picking one up.
For the bottom piece across the top part there are three little tabs that you pop up then in think two little ones you have to work downward on the sides then it will slide off.
replacing the aluminum unibody part does require a full disassembly.
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1054682
Check out the site linked in my post there. Any use to anybody?
DirkGently1 said:
http://forum.xda-developers.com/showthread.php?goto=newpost&t=1054682
Check out the site linked in my post there. Any use to anybody?
Click to expand...
Click to collapse
http://cnn.cn/shop/google-c-976.html this is where I bought few things before but not for my Nexus One
Thanks for all your help guys !! I got my housing today and replaced it is hard but not as hard as I thought your tips helped alot
I did it 2 days ago, pretty easy, do take care of the power button though