htc tytn ii doesn't boot - Windows Mobile Development and Hacking General

hi,
my HTC TyTN II can't boot.
it stopes here
HTC
R 1.70.19.09
G 25.83.40.02H
D 3.34 shifu
that's happend after a reset
help please

have you solved your issue? if no try hard reset..

Hi,
yeah a tried hard reset , but nothing changes

now it works, thanks a lot Shifu

My phone is stuck again in the BIOS verification :s

reply please !

make sure its firmware is updated to latest one

i can't,the device is stuck,I cant connect it to my pc to update the rom

Flash using sc card
you can try to flash with SD Card, as described in the wiki: http://forum.xda-developers.com/wiki/HTC_Kaiser/Flashing
"How to flash your kaiser using the microSD card"
Greetings
cinq

thanks man ,you saved me. love you

Related

Req: English ROM needed

Dear all
i just have regitered over here after i tried alot with shop's over here to change the language of my T mobile MDA from GER to ENG
i searched all the forum to find out where i can get ENG ROM and the correct way to falsh it with USB cable ... am not expert to flash it in bootloader mode
Can any one help me please out here ?
Thanks in advance for all
http://lumpistefan.dyndns.org/ - all versions, languages + couple of nice progs that can be optionally included straight in ROM - make your RAM free! :lol:
Thanks alot bob190cm but am looking for the orginal latest version for my PDA
Thanks man for your effort
tmobile's uk site would prob be a good place to start looking
2 sunpower:
Actually, if you unmark "Add software and modify ROM" option, you get the original ROM - 4.01.16 ENG is the official T-Mobile release of WM2003...
Man i downloaded the 2003 ROM and tries to upgrade my PDA but it killed it ... ActviSyn does not recognize it any more
what do i have to do now do i have to try the bootloader way ?
if yes what do i need to do it and how ?
Have a look around that forum.
Now I can tell you this: activesync will not recognize it - simply try running the update again. If doesn't help - see forum for exact instructions how to run the SD update.
PS: what actually happened?
I made a 2003 rom for my XDA I T mobile device i tried to upgraded it but it hangs up and a mseege appared asking me to soft rest my device and try the operation again ... now ActiveSyn not connecting to the device and i dont have an SD my Bootloader is 5.25 is this loader is bad ?
Please advice.
Thanks
i forgot to ask you what is soft reset and hard reset ?
sunpower said:
i forgot to ask you what is soft reset and hard reset ?
Click to expand...
Click to collapse
A softreset is a restart of your device. You do it by putting your stick in the little hole down on the left side.
A hardreset performs a blank installation of the System stored in your Rom. All applications an data installed will be lost. You can do this by unsrewing your stick, putting the top in the little hole down on the right side, wait for about 60 sek. and do this again....
HTH
Stefan
You guys are wonderfull :lol: i got my XDA back by bootloader method .....

Big problem with reflashing

I have a big problem with reflashing...I had Win2002 reflashed to 2003 ver 4.02.04 ENG but I have problems with synchro sometimes...I want any other version of Win2003 but I can´t reflashed it because of the error in ProgrammeA...Please help...the SD Card reflash doesn´t work too...
What problem do you get reflashing via SD-Card?
Have you followed the instructions?
What error do you get flashing via exe-file? Is it the standard Error 011?
Stefan
Yes...it is this error...with the SD Card - I copy with the XDA tools the file to the sd card...but when I make a soft reset to boot it...the XDA show me,that the SD card isn´t formated and if i wish to formate it...I can´t boot the instalation (flashing)
What do you want to do with the Soft reset? You have to enter the bootlaoder. You have to press the power button and stick in the littel hole at the left side at the same time.....
Stefan
Thanks a lot...I`ll try it...

Stuck at first screen

After unsuccesfully trying to change my rom my prophet is stuck at the booting screen. Soft reset, hard reset.. Noting works :S
can someone please, please help
Have you made USPL? (Case yes) Was it Ok?
Might you check out this thread here:
xda-developers > Artemis > Artemis upgrading etc.>Orbit Stuck On Booloader
http://forum.xda-developers.com/showthread.php?t=344733
I tried to update to ProphetTouchVIII. First step, using the RUU worked. but after the second step, upgrading the rom to ProphetTouchVIII and hard reboot I got a short message (less than 1 sec) "format FAT partition
Format is completed!!" and now it returned to bootings screen and got stuck there.
I will read the recommended thread but so far I havent found anything helpfull there. The big problem is that my computer wont find the m600 anymore so I cant flash the rom back to a working one, i guess..?
further suggestions are welcome..

Htc p3400 hanged at start up page onyl

Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
hard reset
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
do hard reset
i had done hard reset also
Try to bootup without the SD card (and may be SIM), I had this problem with my Vox, the SD Card was corrupted. After formatting the SD Card, everythig became normal.
Best of Luck
Same problem
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says Setup complete, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos (from Portugal)
matosmatos said:
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says congratulations, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos
Click to expand...
Click to collapse
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
for ur info @matosmatos
hi
as per the numbers quoted by u urs is a old gene so falsh roms for old gene only this is just for ur info
goodluck
matosmatos said:
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
Click to expand...
Click to collapse
@smb_do
hi
assuming ur phone is just dead ie just blank screen do this
1.power off the phone remove batter and press the power button 3 secs
2.put batter back in to the phone
3.Press camera button and then power on at the same time u will get tricolor
used usb and Flash new ROM
or press camera button and do soft reset using stylus this will also give u the tricolor use USB and flash new ROM
goodluck
smb_do said:
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
Click to expand...
Click to collapse
thasnffffffffff
Im so so saaaad
I try avery thing hard reset , now roms every time it accept the now rom and whine it restsrts again tha same problem it stop at
ONPL 1.07.0000
SPL 1.07.oref
GSM 02.79.90
OS 1.9.1.1
please help me send me at
ahmedrefaat82/hotmaill.com
gene hanges at start up page onyl (after rom Upgade)
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
satishgosavi said:
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
Click to expand...
Click to collapse
Not likely, try a hard reset and see if your issue is solved
Addicted2xda said:
Not likely, try a hard reset and see if your issue is solved
Click to expand...
Click to collapse
I had tried that also but not able to recover I had to burn the ROM again .
I am scared now to soft reset my gene. Never know when it will get hanged again. (pls note that it does not hang on every soft reset).
I liked the new ROM (6.1 pro Sumeet) so much. It is fast and have left enough room to add/execute other applications. I have read so many good comments about the ROM. I do not want to change it to any other version.
Please.. please try to get some solution.
Thanks in advance.
regards
Satish
It Worked
Thanxxxxxxxx

imate jasjam error flashing pls help

hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken

Categories

Resources