hello guys,
How do I insert a PAUSE in the dialing process, since i'm using a calling card and I need to insert that
thank you so much and Merry Xmas to all of you
Nico
Just insert a "p" to the desired place.You can use multiple "p"s for a longer pause.
?? exemple I want to dial :
0800 pause 123456
I create a contact with number 0800 p 123456
or 0800 "p" 123456
doI need the "" in between ? do I need space between P and number ?
thanks man
Without quotes:
0800p123456
Using spaces is up to you,they don't affect dialing.
thanks man
Most welcome!
Besides "p", you can also use "w", which presumably stands for "wait".
The difference is that while "p" pauses for about 0.5 seconds, "w" will pause indefinitely until you hit the green phone button. I use "w" for some of my dialing cards if I find it difficult to time the voice prompts exactly.
I am using the international phone # format in Outlook so when I syncronize, my contacts on wizard (K-Jam) also gets the same format like,
+90 (532) xxx xx xx, I really like this but it causes a problem.
I press contacts and scroll to a name with this format phone number, when I press yes it changes to dial screen and gets back to contacts immediately without dialing. And it won't dial that number anyway after this.
If when I first open contacts I open the details of a contact using ok button, and then dial a formatted number there again with ok button it works without any problems.
Does anybody have the same problem or know a solution to this ?
unfortunately the only thing I know that works is to change the + to 00
Better Way
I realised that putting a gap between the + and the country code solves the problem but still not an effective solution for outlook doesnt let you put that gap there. You have to edit your contacts on the phone manually.
Or is there a better way ?
Has anyone found a utility or a way to automatically dial numbers using a calling card? This is a rather convenient feature in my previous (non-WM5) cell phone that allowed me to import my corporate phone numbers and then use automatic calling card to dial them without editing hundreds of entries in the phone book.
I have noticed the "Callingcard" code sample at MSDN, however, there does not seem to be a compiled binary available anywhere and I do not have the development environment available.
Any help or tips appreciated.
Ihave been using this one
It is one of the importat things for me
so I use Program called "Long Distance Dialer (Pocket PC Phone) 1.3"
it works on WM2003, WM2003SE and I am runing it right now on WM2005
http://www.pocketgear.com/software_detail.asp?id=12595
good luck
DNO
Thanks! I did not realize it even runs on WM5. However, it does not see to go past dialing the access number - goes to reorder / busy tone right after. Is there a trick / fix to it?
I am using it on HTC Wizard
I never had that kind of problem
I don't know how to help you
This is my settings
Name: My card name
Acces#: my number (only numeric )
Dial Seq : PIN/Destination
Wait: 1Sec Pin : My pin
Wait 1 Sec Destination
then I go to Contacts I right click on the name I want to dial , it gives me optioon >> Dial using : then Name of my calling card .
When I click on that it gives me list of the phone numbers unther that name .
Since I call from USA I do need to select option << Add 011 before number >> but I do not do it because I added 011 to all phone numbers that I call with the card , in the Contacts
I hope this will help.
Good luck
DNO
I installed Long Distance Dialer 1.5 on my PPC. I like it so much that I want to register ($4.99). However 1.5 cannot be purchased anywhere anymore. Did anyone manage to purchase a registration key for 1.5? Or alternatively are 1.3 registration keys inter-changeable with 1.5?
This seems like a great piece of software, but it won't seem to accept pins less than 4 numbers. I have all my number listed with the country code first, so I need to add 00 to call them. In the past, I've configured my calling card feature to use 00 as the pin, which works great, but I can't get this to do it and I don't want to manually add 00 to all my numbers!
Many thanks for any help,
Paul
The link is to version 1.3. What you need is version 1.5. A quick Google will give you two or three sources.
1.5 has no limitations, but has an annoying trial notice pop-up each time you use it. Where can I purchase a registration key?
Thanks for the reply. I've downloaded v1.5, but it still won't let me enter a pin of less than 4 digits. Any thoughts?
Many thanks,
Paul
Solved the problem. In v1.5 you can put spaces as well, so, even though it needs at least 4 characters, I can put two spaces and then the two zeros.
Best,
P
Interesting - I was trying to solve my problem with the software dialing only the calling card access number. I defined an address book entry with the whole number with pauses - and still only the access number gets dialed. The card I use follows the "Number followed by PIN" model with a second dial tone after you dial the access number and a third one after the called number. Any ideas what could be causing the issue? Could it be that the Wizard does not recognize that the call has been completed after it dials the access number?
free and the best calling card dialing software
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
My email to the author (VSOFTCODE) of LDD bounced. Looks like I will have to remove it after the trial expires.
Edit: I just managed to purchase a licence through Handango after all.
----->chaniana
Thanks works fine!!
chaniana - BIG thanks - it works flowlessly.
Now - if I could only get it to dial the number before the PIN!
reg key
Well I know this is not a warez site but
would it be wrong if I give out the reg code ??
I think not ,because the software no longer supported by the developer.
what you think ???
One more thing !!
I have Version 1.3 which I bought from www.pockeatgear.com
where did you find v1.5 ???
Let me know
DNO
this is cool....
chaniana , i have been looking for something like this for a while... i have 2003 not 2005 to be able to complie or change this...
I am just migrating form treo 650 and am missing a program TakePhone. what it did it let me create rule
e.g. any number starting with a string it will use a calling card so i could set +44 use a calling card x
that way when i disl a number it will intercept the call an see the first few digits, if +44 it will dialthe calling card and wait for me to hit a button to enter a pin then eait for another button to dial the number, all in a few strokes i was dialing international and never had to change my contacts. when i was there in UK all i do is disabke the rule and voila i am in business...
see if u can do this
i did something similar in VS2003 creating from scratch an app that would list the contacts and i enter a ph and pin in 2 seperate textboxes and hit dial, got it to make a call to the 1800# but could not figure out how to dial the rest automatically so i am stuck
Long Distance Dialer 1.5 at handango.com.
Just pay the 5 bucks, it may inspire others to create affordable useful software!
This software doesn't work with PocketInformant. Any solution ?
I installed Long Distance Dialer 1.5 (Trial), entered Calling card (access#, PIN)
I can see new menu item when I right click "contact", but when I select "Dial CCard" NOTHING happe! No call started.
I'm using Wizard.
Hi
I am not able to see any context menu once I tried using by stylus
I am on WM6.1
Is it still usable
cheers
chaniana said:
this is reply to betstu2004 request i.e compiled binary from msdn betstu2004 mentioned about
its in cab format and is attached for downloading.
here is the procedure for installing and using it:
1)copy the cab file in ppc and install it
2)then using any registry editor we have to edit the values of number to be dialled and the pin number of the calling card,to do that
open registry editor
go to:
hkey_current_user
then software
then microsoft
then calling card
in this option you have to edit two entries
1st is Number which is your calling card number
2nd is Pin which is your pin number
save the changes
then to use the software
go to contacts
then
with stylus touch and hold the contact(international) you want to dial
you will see an option
call mobile using calling card
click it
and ppc will start dialling using calling card software with stored calling card number and pin
once the card is finished you can input the values of number if different from previous one and pin again
in some cases the new number and pin will only be saved in the registry after soft reseting the phone
you can even adjust the pause time which is 2 sec by default
this software is working perfectly on my xda exec and i hope you all will love it
cheers
Click to expand...
Click to collapse
For all of you that have smart dialing on there device you can now add support to more then English
as you know the smart dialing is looking for a name in English or sequence of digits (phone number)
a friend of mine developed an app to enable the support of Hebrew for the smart dial without using a 3part app on your device or look for a unique dialer
due to the fact that the smart dial also looks for sequence of digits he developed a program for the home pc that converts fonts to numbers (lets call it "codes"),this codes will be saved in the contacts radio field and in the home-2 field (so if you search by first name or by family name will find the contact you look for)
on the IPAQ 600 you can have a sticker that will carry the fonts for every digit ,for phones that don’t have hardware keyboard you can crate a dialer skin that will carry both eng and your language fonts or just memorize the location of your division for fonts per digit
the application was done using XML file so other non English users can use it and edit the XML to there fonts
please read the attached instruction before you start using it
to gave you a sense of the app and what it dose I will give an example
if you have a name that looks like this
first name :" ΩΨΨ"
family name "ΡΠβН"
let say that digit 1 on the dialer =(ΩΡΠ) and digit 2 on your dialer = (βΨН)
the code that will be crated for this names are *122 in radio field of this contact and *1122 in home 2 field of this contact
to separate between codes and real phone numbers he add " * " at the beginning of any code, but you don't need to add * before any search because the smart dialing is smart enough to look directly for the code
to cut things short
backup your contacts ,download the app, read instruction for installation and then edit the XML file to your fonts
(you will see in the XML file that 3 = א ב ג and it also stands for D E F now replace the אבג with you fonts for every digit )
then convert all the names to codes using this app and sync your device
p.s. – when you locate the name it will show the name and "code " name ,tap on the name then tap on the real phone number (that you will not call the code)
the conversion can be done more then one time if you add more contacts
to use this on any phone (strong or weak ) you must have smart dial and your home language fonts at windows/fonts dir on your device
hope it helps
enjoy smart dial for eng and your language for free
http://rapidshare.com/files/127408314/OutlookHebConv_v16.zip.html
Hi !
Sometimes ( but everyday) I need to hide my number sent.
But I noticed that in the history call, #31# appears not. (#31#+number = hide phone number)
To redial this is not practical. I need redial complet number or edit number before call :- /
Can you help me to find a TIPS or Rom or App can remember #31#. (What's wrong?)
Nexus 4 / JB 4.3 - Stock
Sorry for my bad English
Telmo
Try it, and say me if it's ok for you !
Thanks
Hmm... I am alone ... !?