Guys, I am having a weird issue with my Focus. In the system disgnostic, the Z axis is stuck at -512 and the phone fails to calibrate. The system also fails to auto rotates.
Please help if u can. Thanks.
My friend's Focus also has this issue
its 90 degrees flipped and Z axis is stuck on -512 preaty much the same
He told me that it was working normaly until he messd it up in diagnose app
@Tbilisi - Did he manage to fix that? If yes, then please tell me how. Thanks.
Solved: A Simple battery pull did the job ... how trivial can it get
iamrahul said:
Solved: A Simple battery pull did the job ... how trivial can it get
Click to expand...
Click to collapse
so you just pulled battery out an then put it back and it was set? or you then calibrated it?
Z Axis Problem
I have taken the battery out of my phone to try to fix the problem, and still hasn't fixed the problem. Do you or anyone here have any other suggestions as to how to fix this "Z" problem?
Related
Ever since I had this HTC Tattoo, I couldn't manage to calibrate the G-sensor and therefore the display doesn't turn when I rotate the phone.
I always get the message "Calibration aborted".
Do you guys have this problem? Did you find a solution for this?
Please help!
Reset phone
Already did it. Still not working.
Did you fix the problem yet, you could try a different rom or even reflashing the one on the phone already.
same problem here.....
I did try a different ROM, still nothing.
Then it could be a hardware issue. If I were you, I would've looked for a replacement.
have you tried holding the phone at a tilt and then calibrating?
lobotomy said:
have you tried holding the phone at a tilt and then calibrating?
Click to expand...
Click to collapse
Yep, I did try that. Still nothing. I think it's just a hardware problem.
I saw this in the Hero forum and I think it might help. There are 2 ways of checking a hardware fault with the G-sensor:
- either the Bubbles game which does not depend on the OS for sensor data
- or the Sensor Debug app.
If anyone of these apps gives you a good response from the sensor, then it is a software fault and you should harass HTC for a software patch. That's what the Hero guys did and it seems to have worked for them (in that case it seemed to be some kind of permission problem with the calibration log file).
Hi, this is my first post here I didn't have time (and will) to read the rules and everything, so I just hope that this is the right forum for this kind of request.
Since you guys have showed up to be people with nice expertises, I request your help to avoid going to any support center and spend money for something that by lucky means, may be fixed at home
The problem is that when doing some operations, the device freezes and no action can be done, whatever button I press or wherever I click with the stylo.
The only thing that can be done to restore for a while the correct functionality of the device is to remove and reinsert the battery.
I don't know exactly when this problem started to show up, because the device isn't mine, so I don't even know what can be the possible causes.
I have also to say that this problem occurred few times at the beginning, but now it happens more and more often making it impossible the use of the phone. Sometimes I even can't turn it on.
I've tried to substitute the battery, but with all of them, the problem remains.
After that I've tried the software reset, didn't solve anything.
The hardware reset didn't solve anything either.
I thought then that maybe the operating system was going nuts, so I tried to flash the device putting WM6.1 Stratos FE+ on it (of course, following the guide and without doing anything wrong), but nothing changed.
I don't know what else it could be, so before throwing this piece of garbage in the bin I ask here for the last sentence, if you can help me.
I have some pictures attached of the phone freezing and the screen tearing up (looks almost like The Matrix movie).
Thanks in advance.
Hello,
From my experience, i think your problem is due to CPU overheating.
There are similar threads on this forum, regarding your problem.
I advice you to check those threads.
have anyone fix that problem? i have the same problem, but 3months before i put a rubber between the cpu and the metal cover and it worked, but now again and the rubber dont help anymore
I didn't do anything still on my phone, I am waiting that somebody gives us an answer
The only thing I did was to reduce the backlight brightness, according to the problem this guy has on this other thread -> hxxp://forum.xda-developers.com/showthread.php?t=596927
But the only thing I've got after this is that the phone lasts a bit longer before crashing
trinity
also here.
somethimes I must leave it without battery an hour or so to power up again.
nothing help. reinstal everything twice. even in stand by it freeze...
it's a wtf problem .....
also I'm very curios for some remedy. I incline to believe it's a hardware problem .....
please if anyone know how to fix that problem then say it here please
I have same model and same problem, When i press and hold central navigation key and power key it power on,and it work,few minutes....
On Monday I will overheat cpu and you hear the results ... hopefully positive
yes, please let us know. And what you mean overheat the cpu? How?
I want to fix mine too...
Thanks !!
Dear friends, problem solved ... overheating of components on PCB...
for all the info: [email protected]
really? hey what did you do ? please tell us.....
THANK YOU!!!
I have exactly the same problem with my htc can any buddy help or any sujjestion in this regard.
I have the same problem however
First, I flash back to ship ROM WM5
Second, I try to increase CPU speed up to 420 Mhz by using Pocket Hack Master
http://www.wizcode.com/articles/comments/pocket-hack-master-speed-configuration-guide/
Everything is testing, if you have your experience pls share
File as attached:
1. Install *.CAB
2. Copy patch file into folder
I join with the same problem.
Nobody has an idea how to fix that error?
@ivanish: can u please share your solution!!
how u solved that freezing problem ? plz can u share ?
thinh30 its overheating problem of cpu as i experiance this freezing problem when media player is in use for long time or during usb connection with pc
i think cpu speed should be lowered to avoid overheating and not increased
it's not that , the screen connector is destroyed , i have the same problem , it's not CPU , use search , there were solved this problem few years ago
i tried 3 different roms same here.
when i got sms touch screen is not responding. when i reset it no problem. but i cant unlock i cant answer calls.
any people have same error ?
or
any offers to solve this problem ?
there is a thread about this somewhere around. it seems to have to do with a defect of the touchscreen panel especially if you place it in your pocket facing your leg. place it facing outside you should have no problem. also screen calibration via bootmenu is supposed to solve the problem (partly?). happened to me once, calibrated the screen, never happened again
Recalibrate the screen that fixed the issue for me
Sent from my Dell Streak using XDA App
i made re-calibration lets wait for one day or two. bec here time is 11 pm so no body calls me after now lol lets wait for tomarrow
yeah now i have no more problems
re-calibration fixed every problem thanks all.
hello everyone
my sg s4 work fine until for some unknown reason in stock rom
first:
light sensor and after that
temp and humid sensor stop working
does anyone else faced with some kind of problem ?
it all shows in service menu just "zero" and in app like androsensor is" waiting for event ...."
could it be a hardware problem because there is nothing happen before it take place like overheating or shock or ......
also shealth app comfort level doesn't work too ....
furomsoai said:
hello everyone
my sg s4 work fine until for some unknown reason in stock rom
first:
light sensor and after that
temp and humid sensor stop working
does anyone else faced with some kind of problem ?
it all shows in service menu just "zero" and in app like androsensor is" waiting for event ...."
could it be a hardware problem because there is nothing happen before it take place like overheating or shock or ......
also shealth app comfort level doesn't work too ....
Click to expand...
Click to collapse
boot in recovery and wipe cache partition and see if your problem gets solved
aditya rathee said:
boot in recovery and wipe cache partition and see if your problem gets solved
Click to expand...
Click to collapse
i do wipe cache and reset factory
still the same ......
i do a search and it seem that other have problem with all sensor include gyro and compass and .....
i think samsung make a huge mistake in putting a ic driver that wont work stable
or maybe the problem is about the new exynos 5410 chip that couldn't handle it properly
seem to be that guys change motherboard to finally fix that issu ......
here is some detail :
ambient light sensor : seem to be cm3321 or cm32181
and temp and humid : SHTC1
boot are fine product and its not reasonable to hardware sensor stop working one by one .......
still confused.........!!!!!
furomsoai said:
i do wipe cache and reset factory
still the same ......
i do a search and it seem that other have problem with all sensor include gyro and compass and .....
i think samsung make a huge mistake in putting a ic driver that wont work stable
or maybe the problem is about the new exynos 5410 chip that couldn't handle it properly
seem to be that guys change motherboard to finally fix that issu ......
here is some detail :
ambient light sensor : seem to be cm3321 or cm32181
and temp and humid : SHTC1
boot are fine product and its not reasonable to hardware sensor stop working one by one .......
still confused.........!!!!!
Click to expand...
Click to collapse
maybe you should take phone to customer care center i guess
my oneplus 5 was working fine before 4.5.13 ota update after that my phone doesnt rotate to left and gets inverted.I tried flashing other roms and hard reset but no luck.There are more users having problem after this update,any solution?
Pass the stock rom by adb sideload
Set the device to fastboot mode and connect the USB cable. Then type:
adb sideload rom.zip
For more information go to oneplus website.
Dewang p3100 said:
my oneplus 5 was working fine before 4.5.13 ota update after that my phone doesnt rotate to left and gets inverted.I tried flashing other roms and hard reset but no luck.There are more users having problem after this update,any solution?
Click to expand...
Click to collapse
You're correct dewang bro..
I've seen your video https://youtu.be/-wa-cO2e0EQ
Even I'm facing the same issue with my OnePlus 5, rotating sensor doesn't work for one side
GAMIT PRUTHVI said:
You're correct dewang bro..
I've seen your video https://youtu.be/-wa-cO2e0EQ
Even I'm facing the same issue with my OnePlus 5, rotating sensor doesn't work for one side
Click to expand...
Click to collapse
its wierd that 4.5.13 is causing this issue as permanent damage
Dewang p3100 said:
its wierd that 4.5.13 is causing this issue as permanent damage
Click to expand...
Click to collapse
Yesterday I went to OnePlus service center, they're asking me to pay 2900 INR for the sensor.
I've denied to pay and they rejected my devise by mentioning it as a physical damage
I bought my phone a few days back and noticed same funny behavior with compass (if not mistaken works with rotation sensor also). I gripped my phone firmly so my phone can't fly off from my hand, after that I gave it several sharp and sudden turns on both ends of 3 axis of rotation (X,Y,Z) my problem was solved. You can try it at your own peril. If you have positive results, let me know.
I had this too. Now I'll stay on OOS 4.10 after gettig it repaired for free.
Aalikhan said:
I bought my phone a few days back and noticed same funny behavior with compass (if not mistaken works with rotation sensor also). I gripped my phone firmly so my phone can't fly off from my hand, after that I gave it several sharp and sudden turns on both ends of 3 axis of rotation (X,Y,Z) my problem was solved. You can try it at your own peril. If you have positive results, let me know.
Click to expand...
Click to collapse
didnt help bro
Zocker1304 said:
I had this too. Now I'll stay on OOS 4.10 after gettig it repaired for free.
Click to expand...
Click to collapse
how are few models getting affected by update?
Dewang p3100 said:
how are few models getting affected by update?
Click to expand...
Click to collapse
No idea I guess we just had bad luck with the Mainboard. I don't think it had to do with the specific update.