Database Users

HELP :(

Guys HELP, my Proximity sensor ain't working .. I tried switching to different ROM and still no luck

Give more details, like which rom, how is it happening, when did it happen(after doing what) etc.
Sent from my GT-I9003 using xda premium

I have problems with the sensitivity of my proximity sensor as well. I assume you are in call when you want to use the keypad?
Try cleaning around your proximity sensor. You can also check it by using a flashlight to see if it is working properly.

did u ever drop it ?

Well, the screen doesn't turn off when im on call. I noticed it after i got my phone by from servicing (The digitizer got broken and i replaced it with a new one). And when i asked those guys from service center they had NO IDEA, and just for the sake of saying it they said, the problem has to be with the board.
I have switched with the most popular ROMs and yet no luck.
GUYS HELP

Aced443 said:
Well, the screen doesn't turn off when im on call. I noticed it after i got my phone by from servicing (The digitizer got broken and i replaced it with a new one). And when i asked those guys from service center they had NO IDEA, and just for the sake of saying it they said, the problem has to be with the board.
I have switched with the most popular ROMs and yet no luck.
GUYS HELP
Click to expand...
Click to collapse
odd... go to cyanogen alpha 6 and then go to alpha 7 after wiping data in alpha 6 and using it for several minutes, make call if you can. then after flashing alpha 7 maybe its fixed...

I had the problem like yours, proximity sensor didnt work, i flashed my cm7 rom again and had no positive result, wiped cach/dalvik/data. until i fixed permisions in cwm. Now it works, i cant tell wich step helped.

Test using some application in market called Sensor Tester............it might help to see what is the problem.........

Install cm7 the rasna rom is the best one of this list and check than again
http://forum.xda-developers.com/showthread.php?t=1234591

cofirm first
Aced443 said:
Guys HELP, my Proximity sensor ain't working .. I tried switching to different ROM and still no luck
Click to expand...
Click to collapse
hey first confirm is your senser working or not with *#*#0588#*#* this code.
IF I HELPED YOU PLEASE PRESS THANKS

Aced443 said:
Guys HELP, my Proximity sensor ain't working .. I tried switching to different ROM and still no luck
Click to expand...
Click to collapse
Use Andro Sensor to check whether your sensor hardware is working or not.

I dont know why this works but it works... format your sd card, reflash your rom, it should work now, if it doesnt its a hardware issue. also make sure its a rom with proximity sensor used. (kyorarom, kyrillos, dutchmods ive tested and it works)

Dead spots on screen...

Really weird.. Out of nowhere , the bottom right corner of my screen has become almost totally unresponsive to touch. The L and the backspace button on my keyboard are nearly unusable.. Anyone have any idea as to how I may be able to fix this? Its like there is a 2 inch by 1cm gap on my touch screen that doesn't respond to touch.. Thanks guys
Sent from my Nexus 4 using Tapatalk 2

Warranty exchange..

Wish I could... Bought the phone through tmobile and I'm getting the run around.
Sent from my Nexus 4 using Tapatalk 2

I have the same problem, but its a band across upper 1/3 of the screen causing weird typing and such, but only in portrait.
Sent from my Nexus 4 using xda app-developers app

Nexus 4 touch screen defect (dead zone, phantom touch)
I have the same problem, I have a permanent ~1cm tall dead zone spanning the width of my Nexus 4, right about the location of the SIM card tray.
On occasion it is not a dead zone, but rather a "very haunted zone" where there are MANY phantom clicks/drags on different areas of the dead zone in VERY QUICK SUCCESSION. When this happens I have found that constantly resetting the phone (maybe 5-6 times) until it returns to normal (see: dead zone) is the only way to fix it.
That whole situation can take up to an hour to sort out, especially since during the orgy of phantom clicks/drags on the dead zone, the touchscreen is essentially a write off and turning it off is next to impossible, meaning that my phone is bricked for a portion of the day. This happens arbitrarily about once every 5 days.
I purchased my phone from Australia one month ago. Was not aware of any problem until I had returned to where I am currently living in China. I'm absolutely gutted that my first android experience has soured, especially after shirking apple because of (living through years of) their own hardware/software issues.
Why can't I just have a quality, working piece of tech?
So far the warranty options available:
1) Store I bought it from says: Send it to LG Australia (1 non-international warranty)
2) Google says: No google store purchase number, no return
3) LG China? - Can't find any information about LG warranty claims in China.
If I send it back to Australia for repair I will be waiting without phone for weeks, AND I'll get taxed at least $100 by greedy China customs when the phone comes back in. (not to mention the postage there and back)
The problem has become worse and worse as have used the phone. Can any of ye android bros possibly offer any sort of advice or even better, a fix, for solving this problem?

tobiakazmer said:
I have the same problem, but its a band across upper 1/3 of the screen causing weird typing and such, but only in portrait.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have this right now. It's about a third of an inch located near the middle of the screen. It spans the entire width of the screen.
I sure hope it's just a software and not a hardware issue. I bought this in the US and I am now halfway around the world.

I had the same problem. For me it was right where the middle row of keys on the keyboard are or where the ring is on the lock screen.
5mm thick bar across the screen. I sent it back to be fixed and it's been fine ever since touch wood.
They replaced the entire screen on mine. This is definitely a hardware issue. I did a factory reset before I sent it back and the problem was still there.
Digitiser is too close to surface I think causing problems.
Sent from my Nexus 4 using xda app-developers app

Guys i have the same problem since this morning.
I tried everything change roms 4.3 / 4,4 and finally returned to stock.
Nothing worked although i had never the same problem before.
So i tried my last chance. Changed radio image with the help of a Toolkit of our forum ( thanks N-Cry Toolkit )
It seems to be fixed for now , i just rebooted.
Hope it will be ok and you could fix yours too

Hey!
denpeirazei said:
Guys i have the same problem since this morning.
I tried everything change roms 4.3 / 4,4 and finally returned to stock.
Nothing worked although i had never the same problem before.
So i tried my last chance. Changed radio image with the help of a Toolkit of our forum ( thanks N-Cry Toolkit )
It seems to be fixed for now , i just rebooted.
Hope it will be ok and you could fix yours too
Click to expand...
Click to collapse
This really worked for you?

em.faris said:
This really worked for you?
Click to expand...
Click to collapse
Well it worked. I cant understand the reason yet but it keeps showing after some time. I m trying changing roms / baseband / bootloader and return to stock trying to identify when it doesnt work and why. It's really annoying and i m tired of it.

denpeirazei said:
Well it worked. I cant understand the reason yet but it keeps showing after some time. I m trying changing roms / baseband / bootloader and return to stock trying to identify when it doesnt work and why. It's really annoying and i m tired of it.
Click to expand...
Click to collapse
well for me its a hardware issue, but since you said it worked fine when you changed the baseband it really surprised me up
actually happy, cuz there are many users who has this problem.
do keep us updated when you find your fix for this. will be of much help may be in future if something goes wrong on my N4

em.faris said:
well for me its a hardware issue, but since you said it worked fine when you changed the baseband it really surprised me up
actually happy, cuz there are many users who has this problem.
do keep us updated when you find your fix for this. will be of much help may be in future if something goes wrong on my N4
Click to expand...
Click to collapse
Had the same touch screen issue for months; had a dead spot in the middle of the screen that would interfere with browsing and games.
Updated OTA to stock KitKat just last week and the problem went away. Hope you guys get lucky as well. :cyclops:

Possible Deadzone fix!
capcanuck said:
Really weird.. Out of nowhere , the bottom right corner of my screen has become almost totally unresponsive to touch. The L and the backspace button on my keyboard are nearly unusable.. Anyone have any idea as to how I may be able to fix this? Its like there is a 2 inch by 1cm gap on my touch screen that doesn't respond to touch.. Thanks guys
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Ok... i created an account here because ive had this same problem for the past month at least, but I think i found a fix. It may take a few people to try it as well to see if its definitive.
I have the same 1cm high deadzone spanning the width of my device just lower than halfway from the top.
My troubleshooting led me to this: If its hardware, its only because the software is telling it something it shouldnt be. I'm sure nothing is broken (i.e., from being dropped, etc.) Something is wrong, for sure, but not broken per se.
I took screen shots of temperature and voltage (using CPU-Z app) trying to figure it out. I paid attention to when it happened and when it did not. I boiled it down to two possibilities: temperature and/or voltage (i can explain how i came to this conclusion if you want... would take a bit more explanation).
I charge my phone with the charger plugged into the wall typically. I live in asia so the voltage is a lot higher (but within the appropriate range of the phone). Yet, lately when i go to sleep, I plug my phone into my laptop to charge, rather than the wall... when i wake up the problem isnt there. About 2 hours later or so the problem comes back.
I tried this for a week (charging my phone with my laptop) and the problem is dissipating. As quickly as it escalated (getting gradually worse) it is now getting gradually better.
Try it and see if it works for you. At night when your phone is nearly dead, charge your phone with your USB port attached to your laptop. Try this for a few days. Maybe it will help. Im still troubleshooting specifics to see if it is definitive.
UPDATE: today, the day of writing this, i haven't had the problem at all and it's been nearly 7 hours and the 3rd consecutive night of charging with USB on my laptop.
Nexus 4 - 4.4.2

My dead zone appeared post-Lollipop update
I created an account for the purpose of also reporting this "dead zone" issue.
I elected, on the Tuesday before Thanksgiving, to opt into the OTA Lollipop update. During the process of updating, I noticed my battery drained all the way to 0, while I thought nothing of it.
When the update was complete, I started to notice a dead zone in the middle of my screen when in portrait mode.
Actually, my dead zone spans an inch of my screen.
I have performed several hard resets, soft resets, learned about the ADK & adb, and downgraded all the way to 4.2.
I took the phone, this morning, to a cell repair shop and the technician said that it's not a hardware issue (although I'm not sure he's right).
So, that's my story. If I find a solution, I'll post it.

these dead spots IMO , are because of bad battery or bad charging ...
have any of you facing these issues have used any wall charger other than the default nexus 4 LG charger ?? maybe ur battery was not charged the way its suppose to be .. or maybe ur battery is getting bad.. can sm1 with the problem replace the battery and see if the problem get solved ???and u can try charging it from the original lg charger for 12hrs straight .. it may(temporary) fix the problem /...

Any new ideas for this post? Or is it dead.

Shubhamqweasd said:
these dead spots IMO , are because of bad battery or bad charging ...
have any of you facing these issues have used any wall charger other than the default nexus 4 LG charger ?? maybe ur battery was not charged the way its suppose to be .. or maybe ur battery is getting bad.. can sm1 with the problem replace the battery and see if the problem get solved ???and u can try charging it from the original lg charger for 12hrs straight .. it may(temporary) fix the problem /...
Click to expand...
Click to collapse
i could try the battery replacement on my nexus, when i get the time, ill get back to you if it works....

ok got the dreaded dead spot where the sim card is, i can't unlock my phone. i dont have usb debug enabled, i can push/pull files in recovery but not much more.
ive tried to change the dpi to move the pattern away from the dead zone by editing build.prop manually and pushing it to the phone but cm13 doesn't seem to take the change to build.prop so the dpi is stuck at 320.
now, im trying to set up usb otg and unlock my phone using a wired mouse and y-cable. but quanta doesn't have otg for marshmallow enabled out of the box and i dont have root access to enable it in an app.
is there a file that i can edit and push to the phone to enable otg_hack?

techparkour12 said:
i could try the battery replacement on my nexus, when i get the time, ill get back to you if it works....
Click to expand...
Click to collapse
Did you ever try this?

buffering.... said:
Did you ever try this?
Click to expand...
Click to collapse
i did it, battery has nothing to do with the screen, its better to just replace it.

Sensors and MCU not working

Hi guys,
New owner of a S4 (GT-I9505 international) here with a problem. 2 days ago I noticed the screen wasn't rotating anymore. I used to rotate it portrait/landscape in applications like Camera or Internet (browser). The moment when it started to bother me was when looking at pictures with the phone in portrait and the image was landscape. Trying to rotate the phone didn't help. It was frozen. I called a buddy of mine who has some experience with Samsung devices and told me to verify the "Auto-Rotation" settings. It was all OK and enabled. Then he suggested turning the phone off and pulling out the battery and SIM card for 5 minutes and putting it all back. This didn't help either. Finally we got to the point where he told me to enter *#0*# in the Phone dialing application. As you might already know, this code gives you access to the "testing" hidden utility. There I tested all the options available. Everything was fine except for the Sensors and SensorHub Selftest.
In the Sensors section, all the tests failed, starting with the Accelerometer and ending with the Temperature. I uploaded screenshots taken during the tests. Please remember this started 2 days ago. Before this it was working perfectly. I don't recall making and major changes like updating any OS components or installing/running stress utilities related to sensors or device behavior. After doing some research online and reading about other people's similar problems I got to the point where I started to suspect a problem with the MCU (Micro Controller Unit). This component, according to Samsung, controls all the sensors and reads raw data from them without accessing the AP (Application Processor) this way extending the battery life. I believe the problem is here because it seems odd that none of the sensors are working all of a sudden. Can this component put the sensors into a sleep state and shut them down completely? Might this be the case here?
Below are the solutions I tried in order to revive the MCU and finally the sensors. I was all without success:
1) Turned off the phone and pulled the battery and SIM out. Put the back in after about 5 minutes. Result: sensors not working.
2) Reset to factory-settings from the settings option while the phone was in the working state (turned on). Result: sensors not working.
3) Rooted the phone, installed Clockwork Recovery, made a full system and applications backup and then installed custom ROM (two actually: PACMan, Google Play Edition (4.3)). I did this in order to exclude a problem related to drivers in the stock Samsung ROM, even if it was logical that Samsung being the owner and manufacturer of the device might have the "best" drivers and applications for inquiring the device components/sensors. I am aware this ended the warranty for me, but can I know it can easily be undone. Result: sensors not working.
4) Restored the original stock Samsung ROM. Result: sensors not working.
The utilities used for sensor testing were: Sensor Kinetics and Sensor Tester. Both can be found in the Play Store. On my wives phone, which is an old HTC Desire, both utilities picked up the available sensors and created graphs with the results. On my S4, I only got blank charts/graphics/results. In Sensor Kinetics for the Gyro for example, the message was "Waiting for the Gyroscope sensor...", just that, stuck.
If there are any other guys (or ladies!) out there who encountered this awful experience, please reach out and tell me if you found any practical solution, any other then just taking the device back to warranty. I'm open to any suggestions.
Best regards,
Andrei

Most likely a defective device ... can't you claim warranty and sent it back?

Sounds like hardware failure. This would be an issue for Samsung to solve.
Sent from my GT-I9505

AvelonTs said:
Most likely a defective device ... can't you claim warranty and sent it back?
Click to expand...
Click to collapse
Unfortunately I bought it second-hand and it does not have any warranty. I guess it's one of those moments I wish I had patience and gathered more cash to buy a new one from the store. Anyway, it's my bad luck. I had it working perfectly for weeks after buying it. I will use it like this for the time being..

i´ve got the exact same problem since yesterday...
i think i´ll take it to the shop for warranty

I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...

darklord said:
I've got the exact same issue. All sensors are having the same issue. None are working,
I found out because my camera app was not switching between landscape and portait any more. All pictures are saved as landscape...
Called Samsung Netherlands and they told me to wipe my phone (still latest original stock ROM) and try again.
Making a backup now using Kies... and will hard reset it afterward and check the sensors.again.
Probably not going to work... So I have to send it in...
Click to expand...
Click to collapse
Hi there. I had same problem with sensors and MCU test failed, so i took phone to service. They said its hardware failure and replaced main board. Im picking phone tommorow and we will see...

Hi guys,
I took mine to a local phone service, not the official one, but they are an affiliate. They could not figure out exactly what the problem was so they replaced the logic/main board just for testing. It was all working fine. They called and informed me of the findings. Given the fact I don't have warranty for it, they suggested to send it to our main service in Bucharest where they have a more sophisticated testing equipment. It is possible to get a more precise answer regarding the defective component and maybe a less pricey solution to the problem. At this time, the only viable option is to get a new logic board in place, which is about to set me back 250 USD. I will get an answer from Samsung in Bucharest by tomorrow or the day after tomorrow.
I will get back to you with my final solution... hopefully something not so expensive
@darklord, @eweu: please post back you findings. Maybe in the future when some other unfortunate owner finds his way in here, will have a better understanding of whats on the plate for him.
Thanks,

Hard reset did not work as expected. Going to drop it off at a local official repair center....

S4 Sensors failing
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week

KSal7506 said:
I have the same problem with my S4 GT-I9505 device not auto-rotate, air gestures with gyroscope and accelerometer tests failing. S4 been back for 3 weeks to Samsung for repair came back and failed again after 1 week
Click to expand...
Click to collapse
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!

canaris1780 said:
After installing some other ROM's and playing with different CSC's I have no sound and even no wireless and only Edge speeds on some ROM's. Restoring from backups, wireless came back and HSDPA+ also, but no luck with sound what so ever. Now, I have a tablet more or less. Thanks Samsung, this is great!
Click to expand...
Click to collapse
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.

i'm tired
canaris1780 said:
Flashed I9505XXUDMH8_I9505OXXDMHA_BTU, sound and wlan working again. Previous problem with MCU/sensors still there.
Click to expand...
Click to collapse
really i'm tired to solve this issue.
when i install new stock software the sensors work fine just a few minutes only yhen return to fail again.
i think its software issue and i'll solve it :good::good::good:

Sensors work again
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again

abdali_m2 said:
:laugh: :victory:
Its work right now by itself
:crying:
after uploading the pictures its fail again
Click to expand...
Click to collapse
I have the same thing here
all sensors are broken because of SensorHub BIN FW Version: AT0199999
then i try to update firmware with *#2663# it failed.

I have the same problem with my S4 GT-I9505.
Suddenly the device do not auto-rotate, and no air gestures with gyroscope and accelerometer are working.
The SensorHubTest end with FAIL.
Mid december I got one OTA firmware update and I didn't notice any problems first.
A few days after newyear I notice that my auto-brightness adjustment did not work properly.
Can't remember if auto-rotate didn't work when I notice the auto-brightness problem.
But finally I am here because I searched for sensors problems.
I did the SensorsHub Test with *#0*# and it ends with FAIL.
It seems that there is a problem with the 4.3x firmware.
With 4.2x all was fine.
Can anybody confirm my thoughts - that the firmware is broken and not the MCU itself?
What can we try? Downgrade? I read that one was lucky with "factory reset" but it didn't helped to revive the MCU of my device.
Thanks for reading
and answering
___
DK

Hi, i am a owner of a sch-i545 phone, and i have the same problem with the phone: no response of any sensor and a fail on test (or upgrade firmware) of the sensorhub.
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Yesterday i give the phone to a technician (a close friend of another best friend), he will test the phone on this weekend to determine what is the problem to try to fix it.
When He fix this phone, i will post any news!
Regards.

remy1004 said:
At this time i was tried a lot of solutions: i was flashed stock firmware, custom firmware, and of course a factory reset (by the way, the first time with this problem was when i did it a single factory reset), its still broken the communication with the sensors.
I get back to life the phone when i upgrade the phone from 4.2 to 4.3 (sadly) and get lost when i update the binaries in super su (previously rooted with vroot).
Regards.
Click to expand...
Click to collapse
Thanks for your answer. I have hope that the next firmware will fix it.
What is strange that none of any reseller/privers know this problem. It seems that also Samsung has no knowledge about this special error.
Well if the next firmware didn't fix the problem, I can replace my model with a working one, that is what the guy at the phone shop offers to me.
___
DK

Same Problem Here
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves. I have thought about this and looked around and to me it seems like there are only 3 possibilities for the problem:
1) The SensorHub BIN FW Version is out of date and needs to be updated manually (not through *#2663 as it doesn't work)
2) There is a connection issue e.g. the cable from the sensorhub to the motherboard is loose or broken
3) The sensorhub is broken (not the sensors)
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan

shadowsoulxp said:
Hi guys, I'm new to this forum so be nice :angel:
I am having the same problem in that none of the sensors are working which indicates that it is a connection issue or the actual hub not working or the firmware and not the individual sensors themselves.
[...]
I will try to find the firmware files and see if I can do a manual update. If that fails I will open up the phone and see if the cable is connected/broken. If I still cannot solve the issue, I will have to take it to the shop and hope I can fix it off warranty (I bought it second hand)
Dan
Click to expand...
Click to collapse
Thanks Dan for your reply.
I assume that your S4 shows the same behaviour as my one and the phone is still working fine.
The sensorhubtest failed and your light sensor for automatic adjusting and the sensor for turning the display are not working.
What is really strange that I went to a vodafone shop in Hamburg and ask them if there is any other one having problems with the S4.
You know the answer? They where wondering and telling me that this is wierd and they heard the first time of such an issue from me.
I showed them the device and showed them how I test the sensors. *#0*# funny they didn't know this combo
I hope that you succeed and share your knowledge,
with best regards.
___
DK

Charging touchscreen issue

Hi,
I had received my Moto X Play on 21st November. Right from the first day i started having an issue. Whenever i put my phone on charge and use it the touchscreen goes wonky. It registers some touches and misses the others and typing is a pain. Swiping and sliding also results in accidental touches and something i dont want to open, opens up.
Now, initially i though it was an issue with the plug point in my room. But i tried it everywhere in my house and office and had the same problem. (Note: I was using the charger provided in the retail box). I even connected it to my Xiaomi power bank and had the same issue. I used a Samsung charger and had the same issue again. The phone is working perfectly otherwise.
Could this be a charger issue or an issue with the phone itself? HELP GUYS!

tanay16 said:
Hi,
I had received my Moto X Play on 21st November. Right from the first day i started having an issue. Whenever i put my phone on charge and use it the touchscreen goes wonky. It registers some touches and misses the others and typing is a pain. Swiping and sliding also results in accidental touches and something i dont want to open, opens up.
Now, initially i though it was an issue with the plug point in my room. But i tried it everywhere in my house and office and had the same problem. (Note: I was using the charger provided in the retail box). I even connected it to my Xiaomi power bank and had the same issue. I used a Samsung charger and had the same issue again. The phone is working perfectly otherwise.
Could this be a charger issue or an issue with the phone itself? HELP GUYS!
Click to expand...
Click to collapse
Never had such am issue on mine
Sent from my XT1562 using Tapatalk

tanay16 said:
Hi,
I had received my Moto X Play on 21st November. Right from the first day i started having an issue. Whenever i put my phone on charge and use it the touchscreen goes wonky. It registers some touches and misses the others and typing is a pain. Swiping and sliding also results in accidental touches and something i dont want to open, opens up.
Now, initially i though it was an issue with the plug point in my room. But i tried it everywhere in my house and office and had the same problem. (Note: I was using the charger provided in the retail box). I even connected it to my Xiaomi power bank and had the same issue. I used a Samsung charger and had the same issue again. The phone is working perfectly otherwise.
Could this be a charger issue or an issue with the phone itself? HELP GUYS!
Click to expand...
Click to collapse
Hello have the same problem . I use 3 diferent chargers and on all 3 is the same.

krewett said:
Hello have the same problem . I use 3 diferent chargers and on all 3 is the same.
Click to expand...
Click to collapse
Did you find a solution for it? My phone is getting replaced. But i asked cos i wanna make sure i don't face the same issue on the replacement device.

tanay16 said:
Did you find a solution for it? My phone is getting replaced. But i asked cos i wanna make sure i don't face the same issue on the replacement device.
Click to expand...
Click to collapse
For now no . Problem remain on stock ROM, Cm12.1 and now i use LPH stock rom. Its look like its hardware fault.

krewett said:
For now no . Problem remain on stock ROM, Cm12.1 and now i use LPH stock rom. Its look like its hardware fault.
Click to expand...
Click to collapse
Okay thanks. Im getting mine replaced. Just wondering if it is a problem with the charger provided or my particular phone.

tanay16 said:
Okay thanks. Im getting mine replaced. Just wondering if it is a problem with the charger provided or my particular phone.
Click to expand...
Click to collapse
Must be a particular phone. These type of issues aren't in large anywhere.
Sent from my XT1562 using Tapatalk

Finger print scanner...

Hi, my wife's Lemax 2 finger print scanner works fine (rose gold 4GB/32GB) mine (grey 6GB/64GB) is totally useless! I'm going to try and change it, found this video (sadly in Portuguese) on how to change it, which also has a link to buy them for less than $7!
I ordered one yesterday, they've shipped it today. Need to work on my bravery now
Pete
Link to video...

You may need a new screen too. It looks extremely difficult to remove it without damage. Can you share the link to the video you mentioned?

popoyaya said:
You may need a new screen too. It looks extremely difficult to remove it without damage. Can you share the link to the video you mentioned?
Click to expand...
Click to collapse
Ooops, edited my op

mad_sunday said:
Ooops, edited my op
Click to expand...
Click to collapse
Did you try some of the "fixes" before you go to those lengths? Different firmware, ROM, battery drain.....
Is it completely dead, or just slow?

Supertacomonkeyexplosion said:
Did you try some of the "fixes" before you go to those lengths? Different firmware, ROM, battery drain.....
Is it completely dead, or just slow?
Click to expand...
Click to collapse
Tried them all, it has never worked from taking it out of the box. Even the calibration doesn't detect anything. Running Slim7, still dead, tried the modem flash... DEAD!

Heyyo, eh a screen replacement isn't that hard tbh... Just have to heat up the phone enough for the glue to get soft.
Yeah if the modem firmware doesn't resolve it when flashed via TWRP then it would be a hardware issue.
Last ditch attempt to try and solve it via software would be to try and flash back to stock EUI ROM via fastboot. There's a guide for doing so in the guides section by greenManGaming if you wish to try it

My Lemax2 fingerprint scanner behaves strange.. it gets unlocked with the finger that is/was never saved.. help me...

the LeEco FingerPrint sensor sucks.....otherwise it is a great phone