[Q] LCD and digitizer - HD2 General

I still have my broken lcd and digitizer, it worked fine while i didnt replace it, the touch screen works, and no problems with the lcd, it is only cracked. The question is, can I do something useful with it?

Related

Difference between the lcd and digitizer????

I have sadly broke my screen but it looks fine, it's just the touch not working. Im new at this and I have no clue what the difference is between the lcd and the digitizer. I need to know what to replace on this. please help.
screen and digitizer
the screen is the actual lcd display while the digitizer "touch" part of tthe screen. now i havent replaced the screen on my wing yet but most units the screen and digitzar are one complete unit sometimes the digitizer can be seperated with a razor blade (not recomended) personaly i would replace the entire unit (lcd and digitizer)

Broken LCD

Hello all,
My Touch HD slipped from my hands and ended-up flat on the screen... the screen does not have a scratch, the digitizer still works perfect, but the LCD underneath is broken, so I get a black screen. I can still access the Touch HD via my PC thanks to MyMobilier, though (so why do I complain, huh?!!)!
I ordered a replacement LCD in Hong-Kong (thanks ebay!), got the HTC Service Guide, managed to remove the antenna cover (tough!) and dismantle the whole thing. But NOW I AM STUCK with the 'bezel', i.e. the cover, screen, digitizer, LCD, and metal plate with bolts all apparently glued together.
Anyone faced the same problem? Anyone knows how to separate the LCD from the screen and digitizer?
Cheers,
FroggyZ
Up
Anyone can help with this???

[Q] I think I broke my Digitizer

Hi
Yesterday I Replaced my Speaker, when I opend my HD2 I accedently lifted up the Glas from the LCD. I think the Glas is the Digitizer too. So now when I use the Touchscreen it clicks Randomly or slides randomly. What could cause the Problem and can I repair it?
thx for your help
if im not mistaken the digitizer is attached to the lcd glass facing down. might need to replace
you can replace the digitizer without the lcd panel, but it isn't easy to replace it because you need to seperate the digitizer from the lcd and the lcd can breake. it is easier to replace the digitizer with the lcd panel in one peace.
unfortunately it is more expensive than only the digitizer.
if you replace the digitizer you have to stick it to the lcd panel and it must be in the right position(as before)
After a few tests I found out that not the Digitizer is broken. Its a little tape like thing on the side of the screen(digitizer). Is this possible?
Sent from my HTC HD2 using XDA App

Touch don't work after Screen replacing

Hey there!
I have problem with my old N7 :<
After replacing LCD screen with digitizer (previous was cracked) touch does't work.
I try to move the tape from digitizer but no effect.
I have additional digitizer and second nexus 7, but i don't know that if i only connect the digitizer it will work, or i need to do something eles.

Broken digitizer

Hi everyone,
Yesterday I checked that gorilla glass 3 is a big ****. Now I have my op2 working but with some scratches in the external screen. Touch is OK and the LCD is also OK, but I want to change it because I suppose that with a little pressure over the screen it will broke definitely. I'm looking for a digitizer replacement but I only find people changing both: LCD + Digitizer.
I've found that http://vifocal.com/lcd-digitizer-display-touch-screen-assembly-replacement-for-oneplus-2-two-smartphone.html and it is ridiculously cheap for a LCD + digitizer, so I want to be sure that for the op2 the way to change that part is completely changing the lcd and the external screen. It's that true?
Thanks.
Yes the easiest and best way fix screen issues is to change the entire combo.However if you search you will also find only front glass replacements without the LCD for a much cheaper price($3-4).....
parts4repair.com/front-glass-for-oneplus-two
....but again that requires professional tools for replacement and you need to play with loca glue while reinstalling and the process is relatively difficult and not everyone can do that.

Categories

Resources