Database Users

Some Help... Phone blank screening to a degree

Thanks for reading.
I'm currently using WM6.1 on the phone, and loving everything about it.
Since day 1, I've used a phone lock code, along with PIN1 code.
When unlocking the phone for after say an hours inactivity, the keypad will show, then the screen will go blank only showing the top bar of the phone.
Any press of buttons and screen will just make a beeping sound, and so far nothing I've done will restore the keypad to unlock the phone.
Is there anything wrong with the ROM i have, and is there anyone who can suggest how to correct this?
Please remember, the top bar still shows, and a reset allows the phone to work as normal (once logging back into it of course).
Thank you,

Hi guys,
Sorry to bring this back up, but this problem is still going on.
Not sure how to resolve it, so hoping someone would know how to solve this.
Thanks,

Posted twice for some reason.

Maybe is a sw failure,(50%) try to reflash with this fw: RUU_Hermes_CINGULAR_WWE_3625023_6275_1540700_108_UOOS_SVN05_Ship.exe
if your hermes its from att/cingular. after flash open and close the tap of hermes, if the blank screen continues or return this, the failure is hw (the flex component broken,bus, pcb) in this case you need to buy the spare part or send to sat.
good luck

other possible solution
http://forum.xda-developers.com/showthread.php?t=321163

Hi there,
Its not white screening, or anything else, I think the next time it does this, I'm going to have to take a picture, to make sure it can be understood clearly.
Basically, when bringing the phone out of standby (from pressing off/on button) and attempting to enter my pin into the phone the phone will allow me usually to press at least one number of my pin, and then it'll black screen, where the start bar still displays, but no response.
The handset isn't problematic when being opened for use, or anything else, its just annoying to have to reset to load the phone back up again.
I hope this helps?

Further to the above, here is what i've been talking about...
Happened last night, typically as I was bored, and had to wait till morning to take the photo...

Still no movement on this post...
Would it be suggestable to upgrade the install of WM?
If it is, how easy (will read guides beforehand) is it to do (reasonably, hard etc).
Just this is now my only phone, so don't fancy my chances bricking it.
Thanks!

Sorry to be posting yet again, but this has now happened 3 times a in row since last night. I wouldn't mind knowing if a rom fix would sort this, and if so whats the best rom to go for...
Just keen to get this sorted now...
Thanks.
If it helps, I've nothing running when this happens. The exception of last night, where I was using Audio Manager when walking home, and had to soft reset once in the door.

Hi
I am almost certain you have a software fault here and need to reload a new ROM - take your pick - my preference is schnaps - it isnt that hard to do and should solve your problem
Just go to the Windows upgrading section on here and follow the process - you will be happy
John

[Q] Help! Wildfire crashed, tried hard reset and it won't restore!

Hi all,
I had a terrible catastrophic failure today with my 1-month old HTC Wildfire. I bought my device new, unlocked, in Singapore.
Here's what happened:
Today I received an ordinary SMS (like I have hundreds of times before in the past few weeks) and when I picked up the phone off of the desk, flipped on the screen, and slid my finger to unlock it, I saw a brief error message in a dialog on top of the Messages app. It was something like "com.something .... ", I didn't get a good look at the error but it didn't really mean anything to me at the time. The SMS that I received was then lost (I knew who it was from, but the message was not showing up). A few minutes later, I heard another SMS notification. No error message this time, but again the message did not show up in my Messages app.
So, I pressed the power button to power cycle the phone. After I shut it down, I turned it back on, saw the white screen with HTC logo, then black. It was dead. No amount of pressing buttons did anything.
After a few minutes, I removed the battery and it turned on again. Again, white splash screen and then darkness. Repeated this several times and same result.
Finally, I googled how to do a hard reset. I followed the instructions, held the volume down button while pressing power, cleared the memory, after it restarted it went right back to the white bootloader screen, flashed some error messages, and now I'm stuck in the bootloader. When I select the RECOVERY option, I get a quick screen with something like:
SD Checking ...
Loading [SOMEFILE.zip] ...
No Image!
Loading [SOMEFILE.zip] ...
No Image!
....
....
No Image or Wrong Image!
Can anybody help??! I don't know what to do now. I've searched for this "No Image or Wrong Image" message on these forums, but all the results are about rooting and loading different ROMs. I've never rooted or anything out of the ordinary, I just want the stock OS back and operational.
Btw ... I'm an Android noob, but an experienced Linux/Mac user and 10-year software developer.
Any help is greatly appreciated.
Thanks,
Nate

Recovery mode is something else.
To do a hardreset try the following:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using the buttons on the phone.
1. With the phone turned off, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
Note: If you are not sure whether your phone's power is turned off, remove and then reinsert the battery.
2. Wait for the screen with the three Android images to appear, and then release the VOLUME DOWN button.
3. Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
4. Press VOLUME UP to start the factory reset.
Click to expand...
Click to collapse
Source : http://www.htc.com/www/howto.aspx?id=3567&type=1&p_id=316

Call HTC support. I had a problem with my previous HTC phone, and they took me through diagnositcs over the phone, and when they diagnosed a hardware fault, sent a courier to pick it up from me the next day. This was when the phone was 18 months old. No receipt was necessary, they used the serial number/manufacture date.
Downside: the phone was gone a week, and came back still broken. It was sent away again, and came back fixed. So painfully without it for two weeks, but not a bad experience.
(edit: it was a similar problem: I upgraded to windows 6.1, and my phone wouldn't get past the initial hardware/boot screen)

I tried the hard reset procedure several times. Every time it's the same thing. After it clears the memory, it says "Reboot in 5 seconds..." and then when it reboots, it goes back to the bootloader screens.
I've contacted HTC support via email, and I'm bringing it in to their support center in Singapore tomorrow. I really hope it doesn't take a week ... I'll keep you updated.

Fixed.
I just got my Wildfire back today after a full week in the repair center. Apparently they replaced the main system board. No other explanation for the problem was given.
The repair process itself was hassle free, although I was frustrated by not having my phone for a week. Ended up having to buy a cheap basic phone for $55 to get by on SMS and voice.

Please help. My Milestone 2 is DEAD

Hi all,
I have had loads of problems with this phone, so I decided to do a factory reset.
It rebooted as normal until it got to the Motoblur setup page
It asks for the Motoblur details to be entered, but once you have entered them and pressed the 'next' button, it goes back to the previous screen instead of the next step and then gets stuck in a never ending loop.
I've tried skipping the sign in process but instead of skipping it, it just goes back to the first Motoblur account setup screen instead.
Out of desperation, I have tried to make several new Motoblur accounts but every single time, it gets to 80% completion, then stops.
I have even left running all night (plugged in) and it still freezes at 80%
I can't do another factory reset because it won't get past the Motoblur setup screen.
I've tried to do a hard reset by holding x and powering the phone on but this doesn't work. It just brings up the triangle and android robot but it does not go to the next step despite me leaving it for several minutes.
Only had it for 7 weeks and am awaiting a response from Expansys on what to do.
Any help from you guys will be greatly appreciated.

Apply a debrand image of your system and do a full wipe

phorenzik said:
I've tried to do a hard reset by holding x and powering the phone on but this doesn't work. It just brings up the triangle and android robot but it does not go to the next step despite me leaving it for several minutes.
Click to expand...
Click to collapse
Have you pressed the @ key when you get to this step with the robot and the triangle? That should bring up the reset menu, and then you use the volume and camera buttons to choose and select the option you require.
Cheers,
Steve.

StevePritchard said:
Have you pressed the @ key when you get to this step with the robot and the triangle? That should bring up the reset menu, and then you use the volume and camera buttons to choose and select the option you require.
Cheers,
Steve.
Click to expand...
Click to collapse
I didn't know you had to press @
Thanks
I've done a hard reset, but I still have the exact same problem.
If I try to input my proper Motoblur details it instantly says connection failed (it doesn't seem to even try to connect as fails the instant you press 'next)
Creating a new account hangs at 80%
Any more ideas before I throw it against a wall?
I notice there was an option to boot from SD in the recovey mode.
Would this allow me to boot an official motorola rom?
If so, where would I get the rom from?
A walkthorugh on exactly how to do this would be appreciated if this method could fix my issues.
I'm really annoyed because I sold my HD2 for this phone and I'm regretting it.
Thanks

phorenzik said:
I didn't know you had to press @
Thanks
I've done a hard reset, but I still have the exact same problem.
If I try to input my proper Motoblur details it instantly says connection failed (it doesn't seem to even try to connect as fails the instant you press 'next)
Creating a new account hangs at 80%
Any more ideas before I throw it against a wall?
Thanks
Click to expand...
Click to collapse
I think you need internet connection in order to validate your account or create a new one. Check your APN settings first, or do it on wifi.

Hi,
I've tried it whilst connected to my wifi router. I've even tried it via the data connection but nothing happens.
It seems that despite the data/wifi connections being there, it just ignores them.
I think this is the issue. It's not connecting and I don't know why
The phone displays the wifi/3G data symbols in the task bar but it doesn't seem to be using them during the Motoblur setup

Mine is dead too!!!
Hello everybody,
Greetings from sunny, flooded, blown away, Queensland Australia!
Long time lurker, first time poster...
I have a...
Vodafone-Australian-2.2-Milestone2
2 weeks old and its an expensive paper weight. It was rooted and thats about it, had a bunch of root required apps on there, installed the bootstrap, but hadnt installed Xrecovery yet.
I was playing around the other day. changing settings, installing and uninstalling a heap of apps, testing them. Some app suggested I restart or it restarted itself, cant recall, and that was the end. Boots until it gets past the M, and then its just bootloop city.
Won't register on comp in RSD or anything. Will boot to stock recovery and cleared cache and data several times, but that didnt fix anything. Won't even charge the battery. It will run an update but has to be signed. Problem is, we havent had any updates yet on these phones in Australia and there are no custom roms. What update.zip could I get to try to fix it, because I think thats about my only hope.
While recovery was wiping the data and cache it would stop frequently and each time I would touch the ok in the bottom corner of the screen and it would continue, and seemingly despite the 10 or more stops, completes fine. Surely thats not normal.
Out of ideas, I would just send it back with a story but the vodafone boot animation is replaced with disco flashing lights. and thats all it does, non-stop. Do you think they will notice someone has been tinkering?
Ideas? Thoughts?
Oh, and forgot to mention, when I first got it I had the same problem with the Motorola sign in wizard on startup, for quite a while, cant remember how I got around it though. Stop trying to sign in and just get out of that wizard, install ADW Launcher or similar and dont go near any Moto apps. You are only required to do a Gmail sign in, not Moto.

That's the problem though.
I'm stuck at the Motoblur sign in and it will not skip.
Whenever I select skip, it just goes back to the motoblur sign in page instead of going to the home screen.
Basically, in a nutshell, this is what's wrong:
I can't sign in to motoblur (gets stuck in a loop)
I can't create a new motoblur account (crashes at 80% every time)
I can't skip the sign in process (takes me back to the motoblur sign in page instead of loading home screen)
This is my first and last Motorola phone. Not good at all.

So what happens if you press press home or back repeatedly instead of skip? And if all fails reflash new SBF

benking1972 said:
So what happens if you press press home or back repeatedly instead of skip? And if all fails reflash new SBF
Click to expand...
Click to collapse
It just goes back to the motoblur setup/signin screen no matter how many time I press home, back or skip. It's as if a dll is missing and it's unable to boot to the home screen.
How do I flash a new SBF?
Motorola have agreed to let me return it but if I can do it myself I'd rather do it.
I have found this guide http://forum.xda-developers.com/showthread.php?p=11155476#post11155476
but the link to the UK SBF is dead

Yeah, that's the one, and the link to UK SBF works fine for me. If you can't get it to flash that way, then you are going to have to do it the way I am about to do mine, which is...
http://forum.xda-developers.com/showthread.php?t=804088
Failing that, send it back and be done with it.

since its so new id send it back. you shouldnt be having this problem at all. the milestone 2 is a very solid phone. i had mine running for 90 days straight not even a reboot or crash or anything lol. sounds like you just got a duff one. with any piece of technology theres bound to be a few that slip through the net. even if you find a fix for your problem you dont know what is causing it. and if youve had problems before then somethings obviously wrong. since theyve agreed to let you return it then thats your best option.

Probably i should send mine one back as well.
Bought a new Milestone 2 yesterday (from ebay, Chinese guys but as per retail package phones are for UK market). Put the SIM in just to check before wiping out everything from my old Defy. Made a call, checked the version and the menu and put the SIM back to Defy to backup all I needed. Plugged Milestone to the mains. 3 hours later found promising "Fully charged" on the screen and put the SIM in. That was it... Since I can't power the phone whatever I do. I thought the Power button went off as I tried to perform hard reset (x+Pwr), BRM (Arrow up+Pwr) and nothing happent at all. But then I put the phone on the charger again and the Power button worked fine switching the screen off and back on.
Any other methods to get the phone running?
UPDATE: It's strange and weird, but I've just had an idea to remove SD card and it worked - the phone powered on immediately!! Formatted the card using card reader, put it back - the phone works flawlessly. Fantastic! =))

[Q] Apps wont load, Clicking text message does nothing, pictures don't save.

Hi,
Got my focus 2 days ago. Love it. Today apps dont load. I get a spash screen then dumped back to the home screen or black screen. Take a picture and it doesnt save and camera then shows black. Go to a contact under people... click Text Message So and So and nothing happens. All this worked 12 hours ago. Will not connect to Zune software anymore.
I have no SD card, running straight as the phone came out the box. I have since tried to format the device to which when it comes back everything is there as it was before, still not working. Items I deleted before are back.

Did you buy it from a carrier store or from ebay or something like that?

No. Worked fine for a day then broke. I took it back. Samsungs don't seem to be of a good quality despite the great screens.

Part of screen not working

For the past few weeks I noticed I couldn't respond to posts unless I removed the keyboard and brought the button to the bottom of the screen.
Then I realised that area of the screen just did not respond to anything, like in contacts I couldn't select letters in that area.
I enabled screen touches and they were showing up but there was no response from the OS.
I did a search and one fix was to clear the cache in recovery, which worked for a few hours maybe.
The next step is factory reset which I'll do if it's a permanent fix, but I'd rather not otherwise if I really just need a new phone.
No root so any backup will not be a full one so I'd rather just start again on a new phone if that's what it takes.
Has anyone had this?
Mine is the international version.

Well, today I mentioned this to work mate as it's been rather annoying so I prepared a screen to show them the issue at the store and now it's been working ever since.
Up until at least yesterday it was still happening. Very confusing as I was going to bite the bullet and backup what I could and try a new phone as it doesn't seem like a widespread problem.

Part of Touch Screen not working
I have the same issue with my S7 Edge too. It's really annoying especially when you are typing a message and can't send it because that particular area of the screen is not responding to touch. Now I have to type in a message and close the keyboard just to bring the send button down and tap on it. The issue gets solved when i restart the device but the problem continues after a few hours of normal use. Does anyone have a solution to this , Please?

Ok, my phone did reboot last night so it will probably come back.
You have exactly the same symptoms as me.

My girlfriend has the AT&T version of this phone and she has had the same exact problem the past few weeks. Like someone above said, it's right where the send button is in the SMS app.
I wonder what this issue could be?
Sent from my SM-G935F using XDA-Developers mobile app

Well, you can blow me over with a feather as mine has been fine now for about three days, since I was about to show them in the store and ask for a new one.