Service Manual
http://mir.cr/RTDRSELY
Related
Hi
Downlaod This PDF File :
http://rapidshare.com/files/65864824/Wizard_Service_Manual.pdf
regards,
Found these instructions on internet but didn't test by myself. Anyone brave enough?
Disclaimer: use at your own risk!
Samsung Focus Tethering Codes (AT&T Only)
Start Samsung "Diagnosis" software
Type the code *#7284#
Select "Modem, Tethered Call"
The phone will restart
Conect handset to PC via USB cable. Drivers should be installed
You will see the phone modem and you can configure the data connection
number: *99***1#
user name: [email protected]
password: CINGULAR1
Please don't post device specific things in the WP7 Dev forums.
~~Tito~~
[B]Samsung Focus Tethering Codes (AT&T Only)[/B]
I followed the instructions but the modem did not launch after setting to Tethered Call, rebooting and plugging in the USB cable. Anyone else gotten this to work?
sensboston said:
Found these instructions on internet but didn't test by myself. Anyone brave enough?
Disclaimer: use at your own risk!
Samsung Focus Tethering Codes (AT&T Only)
Start Samsung "Diagnosis" software
Type the code *#7284#
Select "Modem, Tethered Call"
The phone will restart
Conect handset to PC via USB cable. Drivers should be installed
You will see the phone modem and you can configure the data connection
number: *99***1#
user name: [email protected]
password: CINGULAR1
Click to expand...
Click to collapse
Hello all,
as title today flashed my phone to get new 7.8 dynamic rom
flash goes well
but after hard reset the phone shows invalid sim card
and imei shows 000000000 (code *#06#)
any idea?
i found a guide here to use QPST but is for samsung SIII
and the 8700 have different engineering menu code...
Please save me ((
***SOLVED***
the solution is app diagnosis
enter in diagnosis dialling the code ##634##
then *#7284#
and select
Modem, Usb Diag
restart the phone and follow the guide here
thanks to Hero for the guide
This may be little bit nooby but discussing on flashing imei's is not a bit illegal-ish? It's not like jailbreaking or any kind of alteration don't you think?
i think so,
in fact i posted a link and not the entire guide
... in any case, it's not so easy to change the imei on your phone and make it functionally.
you need an imei code there is not in use in your country by another phone
and an imei phone a phone like yours according with product type.
there is a function called:
"auto provisioning"
you see you receive, with some carriers, automatic mms and internet configuration at first access?
gsm cell identify and decrpt your imei and give this info to carrier.
hope this can helps
Hi All
I have an i9500 Mobile internatiol
i changed imei to be able to use Turkish Sim card and network /
i use this firmware: I9500XXUAMDE_I9500OJVAMDC_I9500XXUAMDE_HOME.tar.md5
in this only method to be able to use turkish network:
in this modem :Service Mode available. and network can register.
whenever phone boots.the network icon Disabled.
So i have to :
1- Diversity RX read value.
2- change service domain.
then network works normally . But sending SMS not possible.
So:
1- is there any method to save or automate this procedure?
and.. where is the setting of Service mode being stored?
2- this procedure only works on :4.2.2 , reason?
3- a modem how can be patched > while there is no known method to unpack modem.bin ?
i will highly appreciate your replays and tries to help.
it is important for us here/
Thanks.
Product Overview
Applicable Scope and Precautions
Exploded View
PCBA Components
Software Upgrade
Maintenance Tools
Disassembly Procedure
Assembly Procedure
Principles and Failure Analysis