Related
Hi all!
I have an Anextek SP230 Pocket PC 2003 Phone Edition device. I don't have any MMS software included or a software to view the SIM Menu (vodafone services like news, etc.)
Is it possible to extract this softwares from an XDA II rom and install it on my device?
Thanks
Luk4S
hi
yes you can
I have an Anextek SP230 too, i use softwares XDA II
now i can send MMS
and now look 4 midi.cab album . cab camera .cab
Re: hi
The french extended rom can be downloaded from FTP mentioned here: http://forum.xda-developers.com/viewtopic.php?t=8403
I can also provide the following CABs (extracted them from some other ROM):
Broadcast_WWE.sa.CAB
CallerIDB31_Hima2_WWE.CAB
CameraB70_Hima2_WWE.CAB
CameraB70_Streaming_reg.CAB
ClearVueV2.4.380WWE.sa.CAB
Customization_TMO_PreRC_UK.sa.CAB
KSE_2.08WWE.CAB
MIDI561.sa.CAB
MMS16012_WWE.sa.CAB
OEM_AKU2a_WWE_04010401.sa.CAB
"t-mobile_shortcuts_only(UK).PPC2002_ARM.CAB"
TMCOMREG.sa.CAB
TMD_UK.sa.CAB
TMDUKCustomize.sa.CAB
Version_AKU2a.sa.CAB
VideoMMS.sa.CAB
ZipB11_Hima2_WWE.CAB
I have Rover S1 which is the same as Anextek SP230
Do you know any software that would make SP230 behave like a modem over IR or cable? wmodem program is not working.
hello
thanks but FTP The page cannot be displayed
waiting for helpe :roll:
ftp.nderal.serveftp.com
user: XDA (minuscule)
pass: XDA (minuscule)
the ftp works just fine
(
Gateway Timeout
The following error occurred:
Code:
A gateway timeout occurred. The server is unreachable. Retry the request.
--------------------------------------------------------------------------------
Please contact the administrator
when you press the url if the browser window it launch have http at first then it's because the forum's auto url linker mess up
copy paste and make sure that ftp is the first part of the url being displayed in the address bar
or you could use a real ftp client
like cuteftp
or total commander
or something
and if your firewall or your isp's firewall block active ftp
you can set your ftp client to use pasive ftp
icant
really thanx for help
but i try ftp.nderal.serveftp.com and http:ftp.nderal.serveftp.com/
and www.ftp.nderal.serveftp.com/ ((((((((
what i can do ....
can you send me just MIDI.CAB BY email [email protected]
thanks againe :roll:
Re: icant
http://mamaich.kasone.com/ppc/MIDI561.sa.CAB
What is this file doing? I think that playing mid-files is built-in into SP230
THANKS mamaich and all friend here
the SP230 cant playing all mid-files and after i but thes file its working very good THANXXXXXXXXX
MMS help
Hi, I have a Audiovox PPC4100 that it is the same thing that a Anextek sp230. A don't have the MMS function, someone can help me?
It is possible to have a CAB file that adds this function?
Thanks
Has anybody experience if HP Mobile Printing works on the O2 XDA II ?
OK found some answers but it seems that it works on HP Ipaqs only...?
Thanks,
Gear
it does work on the xda2, u have to do a manule install by copying the cab and instaling from the xda2,
as for the program it works fine i use it with a number of lan attached hp printers
Thanks Henny. Will try the manual install and inform back on the situation.
The Activesync install though did not work.
Gear
I did the ActiveSync install and it works perfectly for me. I print via IR to my HP LJ 2100 quite often.
RE
Hi guys!
I need help in getting O22 to print using HP Mobile Printing v2.0. My ROM ver is 1.60.00WWE
I've tried doing a manual installation as mentioned but it still couldn't work. There's some kind of error message saying could not find print centre.
The following files were extracted:-
a) hpMobilePrinting.PPC_ARM
b) hpMobilePrinting.PPC_ARM4
c) mPrint.arm
Questions
1) Whats the difference between a) and b)? Which to install?
2) Do I need to install mPrint.arm?
3) Is there any order for the manual installation?
4) Did successful printing uses IR or BT?
Any help would be greatly appreciated. Thanks
Hi all,..
I would like to know if it is possible to use the WM6 internet sharing on a official T-Mobile NL WM5 ROM.
Is there a (working) CAB file or something?
Regards
A.
Just copy the files to the Windows folder and create a shortcut under Start Menu>Programs>whatever folder you want.
Try this. Let us know if it works.
---
Well,..
same error. I've recently tried the CAB file from an earlier post (maybe the same one as this one),...and get the error:
INTShRUI.exe is not a Valid PocketPC application.
please advice...
regards
A.
Cheers, been looking for this
Thanks for that, have been looking for this app. for awhile now.
Softbank X01HT (Hermes) ROM contains those files, but reports "IntShrUI.exe is not a valid Pocket PC Application" when executed. The files on the X01HT ROM were: IntShrUI.exe 184 bytes, intshare.dll 208bytes.
The files posted above execute properly and detect my net connections. Now I just need to find out what to do about this message: "Cannot connect for an unknown reason. To change your connections settings tap Settings."
Will post if I find the answer.
INTShRUI.exe is not a Valid PocketPC application.
not work on my Eten M600+
but thanks anyway
Works great for me on my WM5 XDA Flame, by cable and BT !
Thank you very much !
Im gonna try it on my Treo 700wx and tell !
Hope it works!!
Have you voted guys?
Nope. Not working. Donno how to make it work.
Not workin for me too..
Hi
Download This PDF File :
http://rapidshare.com/files/65886637/Instructions_to_fix_earphone_connector.pdf
regards,
Hi,
i'm looking for the cab file of the "Connection Setup" Tool. It's for configure your pda for your provider. I hope someone can help me .)
Don't you mean "HTC Network Wizard" ?
Search on the forum with this nam you should find it
it is the same for me:
in my htc cruise / rom 0.96 light swtos I do not have Network Wizard 1.0xxx but Connection Setup 1.5
I am missing the autorun/autodetect functionality (no reg keys, menu option in the wizard not activated)
can anybody help?