Has anybody experience if HP Mobile Printing works on the O2 XDA II ?
OK found some answers but it seems that it works on HP Ipaqs only...?
Thanks,
Gear
it does work on the xda2, u have to do a manule install by copying the cab and instaling from the xda2,
as for the program it works fine i use it with a number of lan attached hp printers
Thanks Henny. Will try the manual install and inform back on the situation.
The Activesync install though did not work.
Gear
I did the ActiveSync install and it works perfectly for me. I print via IR to my HP LJ 2100 quite often.
RE
Hi guys!
I need help in getting O22 to print using HP Mobile Printing v2.0. My ROM ver is 1.60.00WWE
I've tried doing a manual installation as mentioned but it still couldn't work. There's some kind of error message saying could not find print centre.
The following files were extracted:-
a) hpMobilePrinting.PPC_ARM
b) hpMobilePrinting.PPC_ARM4
c) mPrint.arm
Questions
1) Whats the difference between a) and b)? Which to install?
2) Do I need to install mPrint.arm?
3) Is there any order for the manual installation?
4) Did successful printing uses IR or BT?
Any help would be greatly appreciated. Thanks
Related
Hey guys,
Newbie here
I have a himalya(XDAII)
Rom Vers. 1.66.00 WWE
Radio 1.10.00
I want 2 know whether i should upgrade to WM5 or not
I mean is it really worth it or not
Can any one help and guide me step by step
[/b]
...
Well the upgrade to WM 5.0 is not so easy and clear (for newbie) as the upgrade for WM2003SE. I mean the additional installations of postinstallfixes,DOCtools,RAMdisk,MMS,etc(all things must be installed separately,while 2003se's ROM is completely prepared). Anyway try the web server made by our King of Himalaya (BL) http://buzzdev.net
it is described there a lot about,or try the discussion board for WM5 especially.
I want to notice you for few recommended steps:
1. what size of RAMdisk do you want to use? (My recommendation is 64/64).
2. flash ROM image patched with current RAMdisk size (Use HimaUpgradeUt_noID)
3. install DOCtools to raise up your Storage space
4. do a hard-reset(for DOCtools)
5. after start-up install PostInstallFixes(shipped in zip with ROM image)
6. install RAMdisk with your preffered size
7. Install MMS
8. beware of installation of old software(some software is not able to run under WM5)
If you will have any question,I can maybe help.
Thanx
wat i really want 2 know is whether upgrading 2 WM5 would be worth the trouble or not.....i mean is the OS really that gr8??
i'm a new user of O2 and dont want 2 fiddle 2 much with my fone coz i might wreck it!!
i'll only do an upgrade if WM5 provides me with some additional utilities otherwise i'm quite happy with WM2003...
...
Well there are 3 major problems with WM5:
-I am still unable to establish ActiveSync connection via USB(you need at least ASv4.0)(I am using BT for connection)
-The camera software is really crap and portation from 2003se is not yet done
-Sometimes there's a problem with phone(call answer,establish,end etc.)
Anything else is really good and better than before. The system is running rock-solid without crashes. The biggest + is that this PPC system is also possible to install(and run)Smartphone applications. Don't be afraid of upgrading. Just beware of bootloader upgrade and you can't wreck it. When the flashing procedure will be unsuccessful,just start the upgrade again and it must working. But read all things carefully about upgrade,what is DOCtools,what is RAMdisk etc. that you can purely understand it.
I've tried it twice and went back to WM2003se twice.
I found it annoying that my camera and record buttons stopped working.
Other than that WM2005 was a nice OS to use.
Pity there isn't a final release for the XDA II.
...
It can't be official for Himalaya,coz the hardware isn't designed for WM5. Especially the memory system(128RAM,32Flash). This new OS has a different memory organisation,that uses Flash for all things including installed software while RAM is used only for running system and apps. Therefore you will need this combination at least:128Flash,64RAM. Himalaya basically offer 128RAM for running(too much)and 32MB as a storage(too low).
...
chazam said:
I've tried it twice and went back to WM2003se twice.
I found it annoying that my camera and record buttons stopped working.
Other than that WM2005 was a nice OS to use.
Pity there isn't a final release for the XDA II.
Click to expand...
Click to collapse
I didn't notice any problem with buttons. It is also working the AEBPlus utility problemless. The flashback know I also. Once tried Magneto,flashed back to 2003se. And again and again and again...coz a lot of problems I've had with the system. Then I've studying buzzdev.net and step-by-step solved problems. Now I have it totally and it's running great.
Hi
I'm running WM2005 at the minute, but want to go back to WM2003SE, as I'm having problems syncing with hardware at work.
Only problem is, since I changed laptops, I can't get my XDA2 to connect with my PC at all! I've tried installing latest ActiveSync 4 from Microsoft site on my home PC (thinking there are fewer things to stop it syncing on the home PC), so that I can go back to WM2003SE.
However, 2 problems:
- 1) still can't make a connection with the PC - don't even have the Code 28 problem anymore (http://support.microsoft.com/kb/264693/en-us) as the system installs a Network Adaptor device driver called "Windows Mobile-based Device"
- 2) once I do connect, unsure of how to go back to WM2003SE - thinking I could simply run the Xda_II_172181_Final.exe ROM file that I downloaded from O2 UK.
If anyone can shed any light, would be greatly appreciated. I'm new to this, so go easy on me!
Would like to be able to continue running with my Vodafone SIM once this is sorted.
Thanks.
...
As I wrote:
>1. I am still unable to connect via USB. I am using Bluetooth. Maybe I need SP2 for WinXP. Don't know. AS4 is using the connection with WM5 little bit differently as 2003se. This connection goes via network connection,not directly. Try this link:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
>2. For flashing another ROM image:Just use HimaUpgradeUt_noID.exe with current OS image file nk.nbf to flash. These files you can download at the FTP of this server. The nk.nbf filename is the same for all ROM images,therefore be sure of version. Copy these 2 files to same directory,put your Himalaya to bootloader mode and start the exefile.
Re: ...
TomasNM said:
chazam said:
I've tried it twice and went back to WM2003se twice.
I found it annoying that my camera and record buttons stopped working.
Other than that WM2005 was a nice OS to use.
Pity there isn't a final release for the XDA II.
Click to expand...
Click to collapse
I didn't notice any problem with buttons. It is also working the AEBPlus utility problemless. The flashback know I also. Once tried Magneto,flashed back to 2003se. And again and again and again...coz a lot of problems I've had with the system. Then I've studying buzzdev.net and step-by-step solved problems. Now I have it totally and it's running great.
Click to expand...
Click to collapse
Hmm...
Perhaps i should have a good read of the buzzdev forums and try again.
Other than that I'm going to be due an Upgrade in fecuary so i might just stick with 2003se and get a WM5 sevice when my upgrade comes. 8)
I'm glad i got the XDA II. I was using a P900 but having a pocket PC phoner seems better for me.
...
Well the WM5 system for XDA II will never have an official release. When I was buying my MDA II,I've had two choises(MDA II vs.P900). Some + was for MDA,some for SE. In total that was two equable devices. I bought my Himalaya due the price was a little bit lower. Now the SE-P900 costs in a second hand 200Euro and MDA II 400Euro. MDA II is much better than P900. The hardware and as well the software. Now I know,that it was my good choice to take MDA II instead of P900. Now when it is possible to use UNofficial Magneto is the Himalaya back on the top.
Hi,
Apologies if this is in the wrong forum.
I brought the o2 Xda Mini S yesterday, and have just got round to installing it. I have come up against a problem as I plug in to my pc, as I plug in the usb it does the usual "Found new Hardware" but I cannot locate the driver "Generic RDNIS" does anybody know where I can download this driver????
Thanks in advance,
Ross
do you have activesync installed? normaly activesync installs this driver when a pocketpc with wm5 is connected.
lutzs said:
do you have activesync installed? normaly activesync installs this driver when a pocketpc with wm5 is connected.
Click to expand...
Click to collapse
Yeah I do ( 3.8 ), cannot use 4.1 as I need to update my pc to install that, and windows updates ruins some of my applications.
cheers
Hi - I think you we struggle to connect a WM05 PPC if you do not install the latest activsync (4.1). My Mini S would not even connect reliably with the software that came with the device (O2 XDA - the disc has ActivSync 4.0!!!) as soon as I upgraded to 4.1 it's much more relible, not perfect! and certainly not as good a my back up device - HP2210 running WM2003 this device never failed to connect with 3.8.
Sorry but I think you will need to update your PC somehow.
Unless anyone knows a trick to get around this problem. :?
Regards,
Chris.
It won't work with 3.x, you need 4.1 installed.
Softick released Card Export 2.15 today and recommended I try it. Sure enough, it works, even on my Mac! There is a catch however, you must enable the following option in Preferences -> Hardware:
- Use Dumb Endpoint
(Alt Init Order may also help if you're having issues, but on my Mac it made no difference either way)
I have attached the .cab since it seems only an exe is available on the website, this should be useful for other Mac users without VirtualPC.
Enjoy!
Nope, doesnt work with my T-Mobile MDA Vario with latest Qtek ROM.
Same problem as v2.12, it hangs when you get the balloon with 'Found new USB device'. I used an Acer Travelmate laptop with Windows XP Pro with latest patches.
Thanks mate...
Works like a dream, solved part of my mac/WM5 problems, now sync to entourage is the only one left...
Do not suppose you got a wondersolution to that Sprezzatura
I mean MissingSync and PocketMac does not yet.
Thanks again for the tip off...
Tubbie
molski said:
Nope, doesnt work with my T-Mobile MDA Vario with latest Qtek ROM.
Same problem as v2.12, it hangs when you get the balloon with 'Found new USB device'. I used an Acer Travelmate laptop with Windows XP Pro with latest patches.
Click to expand...
Click to collapse
I had the same issue until i read a post on the Softick forum. Softick support and another user suggested enabling a combination of "Alt init order" and "Use dumb endpoint" in Card Export Preferences (Hardware tab) as with what sprezzatura posted above.
Now i can use the software perfectly and can swap to / from ActiveSync & Card Export with no problems and no soft resets are required (except for the mandatory reset immediately after installing Card Export)
Goto: http://softick-forum.com/index.php to read what others have said.
Thanks sprezzatura for the heads up that they released the new version.
Cheers,
Chris
p.s. I have tested this and it works for me on every Dell, Toshiba & Clone PC / Laptop i have.
Wicked **** !!
v2.15 works perfect with those 2 settings. Great stuff !!
Hello there from Italy.
I posted this because of a problem that is driving me mad since some weeks. first my data.
pc:
win xp sp3
outlook 2003
active sync 4.5
qtek 9000:
win 5
sbsh phoneweaver
sbsh iLauncher
memmaid
sprite backup
The problem is that when I connect my qtek to the pc via the usb cable the pc tells me that it had a problem installing the new hardware. After that no active sync is coming out and thus no syncronization.
It is definitely a pc bug since I can syncronize my qtek in other pc.
Following some italian forum I uninstalled all usb controllers and things but had no success.
I'm desperate. Can you please help me?
My bests
Michael
Guys...................no one really can help me out?
C'mon, this is a giant leap for me but a small step for you...............
Michael
Did you uninstall/re-install ActiveSync? If not, try that.
If you have and that didn't fix it, try going to Start > Settings > Connections > USB to PC and untick "Enable advanced network functionality" then try again.
Thanks Nanoruler for your quick response.
Yes, I did try to reinstall AS 4.5 plus I have no icon for USB to PC connection in my qtek 9000.................what's going on here?
Thanks............
Michael
Try running the attached CAB
Nanoruler,
thanks a 1000 for your help. Not being a nasa computer expert, can you tell me what is the cab attached and how to use it?
Thanks in advance
Michael
Nanoruler, are you there, my friend?
I'm relying on your help for this..............
hope to read from you soon.............
Michael
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Hi Batvanio,
can you please tell me how to install it? I'm a bit beginner here............
bests
Michael
batvanio said:
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Click to expand...
Click to collapse
It's working with vista?
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
michaelmellner said:
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
Click to expand...
Click to collapse
Depend if you´re using Vista or XP
Vista: Windows Mobile device Center
XP: Active Sync 4.5
Just google it, download and install
Good luck,
ok. I gave it a try, but nothing new happened. I want to think it is not the usb switch fault but my lack of knowledge. Since I don't know how to install it, I clicked on the xml file. An IE page opened wanrning me of the threat running activex commands. I accepted it and clocked on run. After that I tried to hook my qtek but, as mentioned, nothing happened.
Did I install it the proper way?
please let me know about it.
all the bests
Michael
Michael, just copy usbswitch.cab to an SD card, and then find it on your Uni using File Explorer and click on it. It will then install.
Hi Jon and a milion thanks: finally someone who guided me through. Gosh, after all it didn't take that much, uh? All it took was your words.
really really thank you
Michael
iiiiiiiiiiiiiiiiihaaaaaaaaaaaaaah!!!!!
it works: after a zilion months and tests I finally got my universal to hook with my laptop again.
Thanks a lot for that USB switch: it sure helped me out on this while hundreds in various forums across the world couldn't..............
Incredible........
Michael
xda-developers - the best place for gathered information!
definitely!
michael
cant connect
Hey guys... i just bought a qtek 9000 and i can't sync it with my laptop. Running
WinXP SP3
ActiveSync 4.5
and
WM 6.1 RAN ROM
I tried the usbswich cab and nothing happened. Can you help me?
The PC installed the device but activesync is not even trying to sync the device.
Congrats on your Universal!!
Try to uncheck the advanced functionality under usb to pc
Also have a deep read here:
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helps,
hiiiiii every body
i have i-mate jasjar
and i lost the CD , SO PLZ I NEED JASJAR DRIVER
may any body give me the driver very soon ????
iam waiting friends
thank you
Hi Anas, what do you mean buy 'driver'. Everything, as far as I know, is accomplished by ActiveSync. Please describe your need better (I have original Orange CD).
The only driver on the CD supplied with the i-mate JASJAR is the USB modem driver. I have attached it here as a ZIP archive. In it you'll also find the PDF with instructions on how to use the driver.
Hope this is what you're looking for.
abubasim said:
The only driver on the CD supplied with the i-mate JASJAR is the USB modem driver. I have attached it here as a ZIP archive. In it you'll also find the PDF with instructions on how to use the driver.
Hope this is what you're looking for.
Click to expand...
Click to collapse
____________________________
thank you MR.JONNY
>>>>>>>>>>>>>
thank you MR.ABUBASIM
BUT I DO NOT WANT THAT
i will describe my needs
i tried to upgrade my mobile to wm6.1 ,then i found my mobile in the bootleader screen ,and the upgade is faild ,in this time i was too tired and went to sleep after sleeping i found my young brother already formated the partition c in my computer
and when i tried to connecting my mobile with my computer , my computer cannot make connection with my mobile ( found new hardware ) and i lost my jasjar CD .
NOW HOW CAN I MAKE CONNECTION BETWEEN MY MOBILE AND MY COMPUTER .
WAITING YOUR HELP AND THANK YOU VERY MUCH
abubasim said:
The only driver on the CD supplied with the i-mate JASJAR is the USB modem driver. I have attached it here as a ZIP archive. In it you'll also find the PDF with instructions on how to use the driver.
Hope this is what you're looking for.
Click to expand...
Click to collapse
____________________________
thank you MR.JONNY
>>>>>>>>>>>>>
thank you MR.ABUBASIM
BUT I DO NOT WANT THAT
i will describe my needs
i tried to upgrade my mobile to wm6.1 ,then i found my mobile in the bootleader screen ,and the upgade was faild ,in this time i was too tired and went to sleep after sleeping i found my young brother already formated the partition c in my computer
and when i tried to connecting my mobile with my computer , my computer cannot make connection with my mobile ( found new hardware ) and i lost my jasjar CD .
NOW HOW CAN I MAKE CONNECTION BETWEEN MY MOBILE AND MY COMPUTER .
WAITING YOUR HELP AND THANK YOU VERY MUCH
Then you need Active Sync (Windows 2000/XP) or Mobile Device Center (Vista/7) which are free downloads from Microsoft.
Thank you mr.abubasim
abubasim said:
then you need active sync (windows 2000/xp) or mobile device center (vista/7) which are free downloads from microsoft.
Click to expand...
Click to collapse
________________________________
thank you mr.abubasim for your reply
but i want the cd ( which come with the jasjar mobile )
you can upload it on this site and i will download and install it on my computer then i will upgrade my mobile to wm 6.1 , because you know that i must insert and install the jasjar cd on my computer then install windows mobile center then upgrade my mobile and you know i havenot the cd .
So all what i want is { the cd of jasjar }
plz send it to me soon
thank you again
Sorry, I don't have access to the CD myself right now, but I'm wondering if it would be of any help to you as it only contains the following four things:
1. Active Sync 4.0 (will not run under Windows Vista)
2. Microsoft Outlook 2002 (fully licensed and needs a product key)
3. USB Modem Driver
4. Manuals in PDF format.
Active Sync here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
(Or perhaps there's others if you're non-english)