Related
Any reasons why not? Im on Windows XP yet it comes up a warning saying that it will only work on computers with XP!
This is very frustrating...
Is there any other way to link my phone up to my computer? I would really like to transfer some music onto it
Have you got SP2 installed?
I cant, I dont have a genuine Windows.
Do you NEED SP2? Surely there is a way around this...
I can download activesync 3.8 but I think I need the drivers for the phone?
Any help... PLEASE!?!
I've had the same problem with my XP version
impossible also to install an update from windows site
I had to install an update on my windows 2000, that worked
and then activesync 4.1 finally worked 100%
other way to work around that was to download things on XP
put them on my old SPV E200 with activesync 3.7 wich works
and then send the things on my SPV M3000 by bluetooth...
Johnloner said:
I've had the same problem with my XP version
impossible also to install an update from windows site
I had to install an update on my windows 2000, that worked
and then activesync 4.1 finally worked 100%
other way to work around that was to download things on XP
put them on my old SPV E200 with activesync 3.7 wich works
and then send the things on my SPV M3000 by bluetooth...
Click to expand...
Click to collapse
Or get a Legit copy of Windows XP!!!
You run a pirate operating system then compalin when software doesn't work with it properly.
Come back when you have a license. Is your Wizard stolen as well?
hmmm dude...
the post isnt if its right or wrong to steal windows! Its to do with how we can cheat them more!
I think the only way round this is to download a crack to get xp2.
If I could find the drivers for the phone would it work on activesync 3.8?
PS. No my phone is not stolen, Im sure you have a copied CD in your collection somewhere too.
There's a vast number of copied XP versions with SP2 pre-installed available out there. Should be all you need.
I can get a legal copy of windows xp from somewhere...
But to install it would I loose all of my documents?
chrisredmayne: it would be in your interest to backup your docs (and whole system) before installing SP2, even if your windows is legit. It's a big install!
You could make your own SP2 install disk, by "slipstreaming" SP2 into a windows install disk. Also, there are cracks for SP2, and there are also cracks for trial versions of windows.
I imagine the ActiveSync install could probably be cracked to skip the SP2 check, but it's not a long term solution.
I don't recommend any of this. When you start using SP2 and Windows in the future, you'll have to have a legitimate copy to download certain updates from Microsoft, so you might as well get hold of a legit windows, one way or the other. OEM copies are stupidly cheap, and you can even buy an OEM Media Center install for a small amount of money.
V
chrisredmayne said:
Any reasons why not? Im on Windows XP yet it comes up a warning saying that it will only work on computers with XP!
This is very frustrating...
Is there any other way to link my phone up to my computer? I would really like to transfer some music onto it
Click to expand...
Click to collapse
there is a piece of software at
http://www.softick.com/pocket-pc/cardexport2 called "card export II"
allows you to make the wizard look like a mass storage device, so activesync is not needed to transfer to the storage card.
ps (takes a few goes to install)
I dont get how to install it, only looked at it for a minute though. I unpacked all of the files, and it asks to open a prc file? and press hotsync on the cradle... (Guess that means phone).... Stumped
if i remember correctly .prc files are for palm user's not pocket pc.
i think you have downloaded the wrong version!
Use cardreader to download into mSD, anything you want:
Music, apps, but you need cab files to install it from mSD card.
aliendad said:
chrisredmayne said:
Any reasons why not? Im on Windows XP yet it comes up a warning saying that it will only work on computers with XP!
This is very frustrating...
Is there any other way to link my phone up to my computer? I would really like to transfer some music onto it
Click to expand...
Click to collapse
there is a piece of software at
http://www.softick.com/pocket-pc/cardexport2 called "card export II"
allows you to make the wizard look like a mass storage device, so activesync is not needed to transfer to the storage card.
ps (takes a few goes to install)
Click to expand...
Click to collapse
aliendad, can you confirm you actually have Softick Card Export II for Pocket PC working on a wizard device? I have tried this on my k-jam and it didnt work at all. Even when i contacted Softick support they have said they are still working on a WM5 / Wizard compatible version.
EDIT: i just went and downloaded v2.10 of CE2PPC (which funnily enough isnt even mentioned on the website). In the setup i downloaded, i found there is a WM5 ARM install cab however this still fails to install on my Wizard / K-JAM as with all the previous versions.
Thanks
Chris
You need a minimum of SP1. You do not need SP2. For ActiveSync 4.1. If you cannot pass the genuine validation tool you need to enable automatic updates and to install them automatically. You cannot use the Windows Update site. If you set to install Critical Updates automatically it should bring down SP2 (as it is considered a Critical Update)
Also you can just download SP2 (the full install) and you should be able to install it. It should not require validation as you can install it if not connected to the network.
Although the above may not work if you truly have a messed up version of XP. I am assuming you have either a cracked version of a legit copy or an invalid product code.
I have read about people cracking XP Media Center 2005 and all worked well until the Genuine Validation tool. Then somebody came out with a crack for that. :lol:
Good Luck
I just got a disk with XP so I think its a fake validation code that I have.
I downloaded the SP2 from the windows update site, and from a random site somewhere that I searched on google for.
The problem was that when I tried to install it stopped after a few minutes and said that it wasnt a genuine windows. So Im guessing any version that I download will have the same check on it.
But I shall try and turn my updates on later and see if it works, or give that other program a go!
Puckster said:
aliendad, can you confirm you actually have Softick Card Export II for Pocket PC working on a wizard device? I have tried this on my k-jam and it didnt work at all. Even when i contacted Softick support they have said they are still working on a WM5 / Wizard compatible version.
EDIT: i just went and downloaded v2.10 of CE2PPC (which funnily enough isnt even mentioned on the website). In the setup i downloaded, i found there is a WM5 ARM install cab however this still fails to install on my Wizard / K-JAM as with all the previous versions.
Thanks
Chris
Click to expand...
Click to collapse
yes, is does work, had to do a lot of soft reseting but now have a quick access icon at the bottom of the screen to select card export or active sync.
a few days ago did a hard reset, and installed card export as one of the first installs and it installed much more smoothly that the earlier install.
ps great prog makes things much easier, can't install activesync at work.
I am trying my first sync with Vista but when I connect it to PC it starts to look for some drivers. Vista doen't find theme and I can'T sync. What drivers is looking for? Ho can I sync my x7500 with Vista?
Help!
asci said:
I am trying my first sync with Vista but when I connect it to PC it starts to look for some drivers. Vista doen't find theme and I can'T sync. What drivers is looking for? Ho can I sync my x7500 with Vista?
Help!
Click to expand...
Click to collapse
are you using the beta Vista? you need to download the software call windows mobile device center.
Hi, I'm useing Vista Ultimate, no beta, and I still have MDC, but when I connect PPC Vista try to search and download some drivers without success and it doesn't allow me to sync. Previously I was using MDC with HTC P3600 with no problem...
Help
asci said:
Hi, I'm useing Vista Ultimate, no beta, and I still have MDC, but when I connect PPC Vista try to search and download some drivers without success and it doesn't allow me to sync. Previously I was using MDC with HTC P3600 with no problem...
Help
Click to expand...
Click to collapse
have you try connect your p3600 and see whether it sync?
I can't test P3600 because I gave it away. Here it is what I get when I try to sync:
I don't read your language, but based on what you've said, try checking windows update, while your athena is connected. Perhaps, there are files for you to download after you connect. I have Vista Ultimate as well, and the drivers did install when I first synced, so you should be able to have them too.
Really I dont' know what could it be. However the message window say that:
it's necessary to install GENERIC RNDIS DRIVER
What the hell!!!!
Now I'm trying under XP and I have no problem...what could it be? Any suggestion?
asci said:
Really I dont' know what could it be. However the message window say that:
it's necessary to install GENERIC RNDIS DRIVER
What the hell!!!!
Now I'm trying under XP and I have no problem...what could it be? Any suggestion?
Click to expand...
Click to collapse
I'm using Vista Business with Dopod U1000 and it runs flawlessly.
But I was getting Hell with Dopod 900 WM6 and Vista synchronization. So much problems, bugs, and inconsistencies.
Ohhh, thats what it says. Microsoft supply's in most cases generic remote NDIS drivers for at least USB, so vendors won't have to create their own specific drivers (or so I've read, anyway ). Do you run Vista 64? I've heard of 'RNDIS driver missing' issues with Vista 64. You may also want to check your startup disk you received with your Athena. I realize you use WMDC, but there may the RNDIS drivers bundled with Activesync, that you may be able to pull out. Just a thought, and other than that, I'm not sure what else to say, except look on the net. Good luck, I can only imagine how frustrating this must be for you.
Just to let you know i also run Vista Ultimate 64, and uses WMDC, the first time i connect my DOPOD U1000, it install the driver straight away without any problem, then i can start sync with no problem.
mysticbluebmw said:
Ohhh, thats what it says. Microsoft supply's in most cases generic remote NDIS drivers for at least USB, so vendors won't have to create their own specific drivers (or so I've read, anyway ). Do you run Vista 64? I've heard of 'RNDIS driver missing' issues with Vista 64. You may also want to check your startup disk you received with your Athena. I realize you use WMDC, but there may the RNDIS drivers bundled with Activesync, that you may be able to pull out. Just a thought, and other than that, I'm not sure what else to say, except look on the net. Good luck, I can only imagine how frustrating this must be for you.
Click to expand...
Click to collapse
I'm running Vista 32. About startup disk it could only install Activesync and really I can't fiugure out how to extract drivers needed. About net solution, Vista couldn't find drivers on line...
off topic question to mystic blue..
can you post your avatar as a large image?
thanks..it looks interesting your UI..
Here are a few screenshots. Using Wisbar Advance 2, Wisbar Advanced Desktop, Weather Panel, and Pocketbreeze.
UHm very very OT...please some advice about my problem related to this post will be welcome...
It seems that it cant recognize device...
I Found solution!!!
It's a WMDC bug that start to find RNDIS drivers in wrong folder. So all I had to do was to force it finding drivers in correct folder: C:/windows
Now I can sync!!!
Here it is reference...in italian
http://blog.michelecerreto.com/inde...lema-con-linstallazione-di-un-pda-asus-a636n/
Link here
Got mine working with 64bit windows vista. just deleted that file.
YOU ROCK!!!
YOU ARE THE MAN!!!! You don't have an Idea of how many hours I spend searching a solution for get my htc wizard recognized, your last comment on force the driver search on c:\windows solve my problem too...
But not also with my phone even with a lot of hardware that I can't make get recognized...
Vista seems to be a real pain in.... anyways I don't know how many research I have left but, I have two vista x32 home premiun edition computers one made by gateway and the other by samsung.
And I notice that the samsung one doesn't have any problem recognizing hardware, so I entered to the device manager to see the drivers and I notices must of them run under the 6.0.6000.16389 vista_rtm .....) version and I found that this Driver Kit it's availiable on windows connect for beta testers, so I decide to download them, lets see if this driver kit solve many issues with my gateway.
New Version WMDC 6.1 is available!
New version is available in Microsoft website,you can download freely and install!
It should solve most of the problems!
I'm using Dopod U1000 with Vista Ultimate and WMDC 6.1 without any problem!
My only concern is I'm unable to 'reflow' pdf documents using Vista!(It was very easy with Active Sync4.5 & XP)
Any idea to overcome this problem?
plz share!
dopod 595
i have dopod 595, and now i using vista ultimate 32, i cannot sync my outlook. please advice
thanks
Hello,
Just upgraded my 8525 to the latest and greatest ROM. Well ... greatest should really be within quotes!!!
I'm having 2 problems ...
#1) I cannot use my phone thru DUN. I select Internet Sharing. Disable ActiveSync on my PC. Select PC Connection as USB and Network Connection as My ISP GPRS. When I connect the USB cable, I immediately get a message box that New Hardware has been found (Generic RNDIS). Windows (XP-SP2) then prompts me to install the drivers. I click Next but it does not find them and throws an error that Drivers could not be found. I've searched the internet and HTC sites in vain, but cannot find anything that helps.
#2) When I connect my device using ActiveSync (4.5), I cannot get the device to use ActiveSync as a pass-thru for the internet. This results in any calls made to the internet to fail.
Any help would be appreciated. I'm back on the road on Tuesday and need to get this resolved.
Thanks
-- Val
http://www.microsoft.com/whdc/device/network/NDIS/rndis.mspx
also ensure:
Start> Settings > Connections > USB to PC (should be unticked)
mikechannon said:
http://www.microsoft.com/whdc/device/network/NDIS/rndis.mspx
Click to expand...
Click to collapse
Mike,
I had tried that earlier today but it did not work. I unzipped the file and pointed the "Find New Hardware" wizard to that directory location. When I click Next it searches and finally returns with "The hardware was not installed because the wizard cannot find the necessary software".
I'm confused. Aren't the Remote NDIS drivers part of the ActiveSync install? What am I missing here?
-- Val
I have exactly the same problem, and I still didn't find any solution
I have exactly the same problem, and I still didn't find any solution
I also have the same Problem but a different situation
I would like to tether with my phone which I can do with no problem on most computers. However I have a corporate laptop that I cannot install activesynch on...So i just need the driver to install when I connect my phone via USB.
So i get the same error as the guys above me...so any fix to this problem that does not involve installing activesync would be greatly appreciated.
thanks in advance
-brandon
Hi everybody,
Yesterday I had the same problem, but I resolved it.
First, install Activesync 4.5.
Second, when you plug your device and it ask you for the driver generic RNDIS driver, you can choose the place of this driver (don't choose automatic).
So point the "Find New Hardware" wizard to that directory location :
C:\Program Files\Microsoft ActiveSync\Drivers
Then Ok (or next I don't remember)! After windows'd install alone the good driver.
Enjoy your synchronization!
Bye bye
Upgrade ActiveSync
jafangie said:
Hi everybody,
Yesterday I had the same problem, but I resolved it.
First, install Activesync 4.5.
Second, when you plug your device and it ask you for the driver generic RNDIS driver, you can choose the place of this driver (don't choose automatic).
So point the "Find New Hardware" wizard to that directory location :
C:\Program Files\Microsoft ActiveSync\Drivers
Then Ok (or next I don't remember)! After windows'd install alone the good driver.
Enjoy your synchronization!
Bye bye
Click to expand...
Click to collapse
When I used ActiveSync 3.7, this version can not recognize Generic RNDIS. I’d upgrade this version into ActiveSync 4.5, its work.
cheers
[email protected]
Generic RNDIS Error for Windows 2003
Hi Guys,
I am also facing the same problem but I am using windows 2003 server.
I am using HTC Touch phone. Please help me out with some solutions.
Thanks
Murali €N
I had this same problem with my HTC Touch Cruise. Here's what solved it:
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Something worth trying...
If you look at the driver settings for "Windows Mobile Device" under WinXP it shows a file called:
C:\WINDOWS\system32\drivers\rndismpx.sys
I'm wondering if the rndismpx.sys file is all one needs to use to install the driver so that WinXP will see the WM phone as a viable device and therefore allow you to use it's Internet Connection Sharing function to give the PC a data connection to the net?
superswade said:
If you look at the driver settings for "Windows Mobile Device" under WinXP it shows a file called:
C:\WINDOWS\system32\drivers\rndismpx.sys
I'm wondering if the rndismpx.sys file is all one needs to use to install the driver so that WinXP will see the WM phone as a viable device and therefore allow you to use it's Internet Connection Sharing function to give the PC a data connection to the net?
Click to expand...
Click to collapse
Ok I too had this problem, and refuse to use active sync as it always muck up my special clock settings. This is what fixed it for me.
As i DO have active sync installed on my desktop system, and taking the advice of the persom who posted above, i just copied the "DRIVERS" folder onto a disk (From \Programme files\Microsoft Activesync), took that to the laptop i needed to install on, and installed the driver manually, pointing to the DRIVERS folder on th CD i just made. All installed, and "Pinging" nicely!
rbrychckn said:
I had this same problem with my HTC Touch Cruise. Here's what solved it:
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Click to expand...
Click to collapse
I done what you say and that works strait away thank you
pls hlp me
i have kais100 lock to at&t
R 1.27.14.09
G 22.45.88.07H
D 1.62.00.00
PLS HLP ME ............
rbrychckn way is work for me.
the messege "generic rndis himalaya" not appears again ...
the driver seems smooth installed on my windows millenium.
..... but i still CAN NOT make syncronise ....
I use XDA II Himalaya WM5 ..
on my Old Windows Milenium,
MS Active Synck 3.8 (latest version that support by windows milenium)
any idea ? thnks indeed
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Click to expand...
Click to collapse
Yep, that did the trick for me. And this was after spending two hours on live chat with AT&T which was useless.
Thanks. Who knows how long I would have been dinking along looking for a clue.
Judy
rbrychckn said:
I had this same problem with my HTC Touch Cruise. Here's what solved it:
Go to Settings > Connections > USB to PC
Uncheck Enable advanced network functionality
Then the computer sees your mobile and sync begins (at least for me).
Click to expand...
Click to collapse
I have AT&T HTC Fuze and had problem in "generic RNDIS" installation, but when I Unckheced "Enable advanced network functionality" I am able to connect my HTC Fuze to my computer through Active Sync
If you're having problems syncing with Windows 7 RC1, try the steps in this article.
jafangie said:
Hi everybody,
Yesterday I had the same problem, but I resolved it.
First, install Activesync 4.5.
Second, when you plug your device and it ask you for the driver generic RNDIS driver, you can choose the place of this driver (don't choose automatic).
So point the "Find New Hardware" wizard to that directory location :
C:\Program Files\Microsoft ActiveSync\Drivers
Then Ok (or next I don't remember)! After windows'd install alone the good driver.
Enjoy your synchronization!
Bye bye
Click to expand...
Click to collapse
This worked perfectly! (Sprint tp2 w/ XP SP3)
Aielman said:
If you're having problems syncing with Windows 7 RC1, try the steps in this article.
Click to expand...
Click to collapse
This wasn't even the least bit helpful.
The article just tells you to install ActiveSync or WMDC.
I'm having sam problem with windows 7 64bit, and couldn't find solition, can t upgrade my rom...
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael
when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.