I upgraded to SFR some months ago but now I'd like to revert to a previous state (it was NODO when I bought it).
Unfortunately my PC "lost" the backup since it's not asking me anymore to revert to a backup. I remember it used to ask for it but now it stopped.
I checked "windows phone update" backup folder and it's empty
What can I do ?
Download any of the ROMs available in the ROM thread, should work just fine.I recommend the UK unbranded one.
Hello
I manage to build up a GT-I9505.
All the parts that I used are from defective devices purchased from Ebay (main board ; display etc)
At the first start the phone had a strange firmware installed and was in a factory mode.
I did a research on google and I manage to exit from the factory mode and also to flash a new firmware (I9505XXUBMF8).
The new firmware contained PDA/CSC/Modem/BOOTLOADER.
I use the phone since 2 or 3 weeks with no problemes.
But last days I found out that there is a newer firmware (I9505XXUBMGA) so I tried to update via OTA.
Unfortunately each time when I trie to update via OTA i get "network or server error please try later".
Also via Kies I got :
"your device's curent firmware is not supported to update firmware via Kies
current firmware version : PDA:MF8 / PHONE:MF8 / CSC:MF8 (XXX)
What can I do in this case?
The PDA/Modem/CSC seems to match.
From what I read on variuous forums this is all that matters on samsung phones to get updates via OTA & Kies.
Or also the IMEI needs to mach with the PDA/Modem/CSC?
In my case the IMEI is 0 but still the phone works on all the carriers from my country.
Any advice on how to get update work via Kies & OTA will be apreciated.
Thank you
d0ct0ru said:
Hello
I manage to build up a GT-I9505.
All the parts that I used are from defective devices purchased from Ebay (main board ; display etc)
At the first start the phone had a strange firmware installed and was in a factory mode.
I did a research on google and I manage to exit from the factory mode and also to flash a new firmware (I9505XXUBMF8).
The new firmware contained PDA/CSC/Modem/BOOTLOADER.
I use the phone since 2 or 3 weeks with no problemes.
But last days I found out that there is a newer firmware (I9505XXUBMGA) so I tried to update via OTA.
Unfortunately each time when I trie to update via OTA i get "network or server error please try later".
Also via Kies I got :
"your device's curent firmware is not supported to update firmware via Kies
current firmware version : PDA:MF8 / PHONE:MF8 / CSC:MF8 (XXX)
What can I do in this case?
The PDA/Modem/CSC seems to match.
From what I read on variuous forums this is all that matters on samsung phones to get updates via OTA & Kies.
Or also the IMEI needs to mach with the PDA/Modem/CSC?
In my case the IMEI is 0 but still the phone works on all the carriers from my country.
Any advice on how to get update work via Kies & OTA will be apreciated.
Thank you
Click to expand...
Click to collapse
Had the same problem when switching roms (Vodafone Dutch to DBT German) and fixed it.
1. Turn phone off
2. Do the 3 button combo (home button, volume up + power on)
3. CSC will be correctly installed.
4. Reboot phone and your pc
5. Check again
If that didn't work download the full rom and flash it with odin. That will fix it too
Tuesday
306sh activated with MVNO, SA300 firmware, rooted, with TWRP recovery,
working fine for past 2 months.
For unknown reasons, it decided last friday (at home, none to low signal) to do a system update
(from SA300 to S7232). Phone - on the desk- just "dinged" and msg came up "updating
system software". I attempted to cancel, but it didn't respond. Less than a minute later, "Update Successful" msg. Didn't reboot, anything, settings showed S7232 firmware. (SA300 before,
i had done my weekly backup earlier that morning).
Since then, phone constantly reboots at the "Aquos" screen; after an average 8 hours of rebooting, it will boot to setup, the talking setup screen. Works perfect for about an hour then rebooting starts again. Let battery die last nite, tried again this am - same thing rebooting.
TWRP backups don't fix problem- weekly backup, i have 6 i've tried, factory reset doesn't fix, if i try to Software Update, it checks, tells me, "up to date".
I turn on wi-fi to use the phone from home, , guessing it did a ? hit & miss ? ota update since the
wi-fi was off when it attempted the update. Home is a very minimal signal area.
Any way to force it to take the S7232 update again?
(I could update over wi-fi if i had wanted, only i didn't want the update anyhow).
thanks, rik
I can give you a link for a backup with latest firmware, you will have to wipe data tho
https://mega.nz/#!fkommKgJ!fkiaT_p8ZFOBzyJpUdNAqOZlTWpt-5hNuQ-2vvA5tSQ
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Stick firmware updates are not compatible with custom recoveries
sent from rooted 306sh
Just home, thanks
Hi,
Thanks for the help, just home from work (rough), so i will plug the
Aquos in tonite and hopefully be able to try the file tomorrow,
(that 8 hour boot thing), just downloaded your file, i'm ready.
This is my take-to-work personal phone, sprint zone, and i missed it today.
Your help is really appreciated.
rik
Final note
thought i'd just post to let you know the phone obviously had big problems
-- it failed to start today -- just buzz on buzz off -- even after 4 hours charging,
all i could get was the battery dead screen, wouldn't come on at all.
Guess the real problem was with hardware, i laid it away in the junk phone box
in the attic, end of Aquos Crystal.
rik
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
can you help me?
badbadri said:
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
Click to expand...
Click to collapse
can you help me dude? :crying:
im already download this firmware and confuse how to restore it
im looking for how to root my phone but always confuse
and finally i installed supersu on playstore and reboot
im waiting for 5 minutes and not booting, and im plug my phone to pc and the computer request for formating all my storage
and my phone can enter the recovery mode and i go to wipe data & factory reset, and still not work
can you send to my email?
my email is [email protected]
thx ..
Question: My 306SH would not update (still at S8216). Could use your back up to update my firmaware?
After 306SH ph was acting weird, did a hard reset & saw system Software updtd to S7232, & unk file in Misc (.eCtcQjbu1dgnvtFnvnr6yepTp1M=) I then installed Malwarebytes & scan detects this S7232 software update as malicious malware Android/PUP.RiskyTool.Agent.ay (dm.redbend) "/system/priv-app/fotaClient.apk". When going to System to do an manual update, Malwarebytes popups w/same msg every scan "Software App", even aft reboot 2days ago 7/12/2017. And phone wont let me create new google acct. An error that "google account mgr not working" popup & I see that same unk file reappears. Ph not rooted -XDA says "there's no root for 306SH that works">see XDA blog 'Root for Aquos Crystal 306SH ONLY'.
Go to the Sharp USA website for the 306SH firmware, and see what firmware you are on.
Download the firmware from the versions higher than yours, and if there is a repeat, notably "kernel.img", download the most latest version of it.
Then, plug your device into your computer, make sure you have the proper drivers installed for the Sharp Aquos Crystal installed on your computer. Boot your device into bootloader. Go to a terminal, cd to the directory where you downloaded your .img's from the website, and do
fastboot flash kernel kernel.img
Ex.
fastboot flash foo foo.img
And you can flash all the latest updates. When done, exit the terminal, make sure the device is unmounted, unplug from computer, and reboot your Crystal.
Hooray, it should be updated!
turkbot said:
I can give you a link for a backup with latest firmware, you will have to wipe data tho
(Mega-nz link expired)
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Click to expand...
Click to collapse
Turkbot, I hate to beg on my first XDA post, but is there any chance that you still have that ROM and is there any chhance that it's not TextNow loaded? I've got TWRP, Busybox, SuperSU, Xposed, and I've tried every which way to edit the prop, tweak it with modules, unlock etc (it even works with my Sprint MSL, but crashes when I try to manually set my MDN and MSID) It just says no SIM/no service and refused to give me any signal except for GPS and WIFI without one. Countless 'techs' over the phone and 3 different Sprint repair stores claim they don't have the stock firmware and Sharp actually claims that the reason they can't help me with the firmware is their contract with Sprint forbids it.. If you still have the file or a TWRP / Titanium etc backup you would be my savior.
I have a Lumia 640 that I de-branded from ATT to T-Mobile in 2016 using instructions on this site and it has mainly worked fine. There are two problems:
1. Even though backup settings and apps is set to on, I intermittently get prompted to backup up because "there has been no backup in a while". When I click to backup, the process goes to 96% and I get " We cannot connect to OneDrive. Update your phone and try again". When I go into OneDrive, it is empty -- no backups.
2. The phone has the latest Win8.1 version. Upgrade Advisor says "Upgrade unavailable for your phone. We are working with your carrier to make it available.
Does the fact that it is re-branded phone cause this? Any fix suggestions?
Thanks.
I thought that the upgrade to windows 10 was independent from the carriers. However you can try reinstall windows phone 8.1 (using the recovery tool) and then use the update advisor once again...
Hi
I'm a long time Ericsson and Sony user, LG G6 is in fact the first LG mobile I'm using.
I'm a bit confused with the LG UP tool and Uppercut (when compared to Sony's Flashtool).
My phone is P4P region, however it was shipped to me with V20c-EUR-XX firmware (3.18.71 kernel, OPR1.170623.032, PHONE_SW_FULL_VERSION LGH870AT-00-V20c-EUR-XX-AUG-17-2018+0).
It doesn't have any Play (P4P) operator branding etc.
Unfortunately OTA upgrade nor LG Bridge are unable to upgrade it to latest firmware. lg-firmwares.com suggested that I should use uppercut and LG UP software to patch it.
Question 1:
Which firmware should I use ? I assume that as long as it already has a generic firmware, any EU open firmware should work. Is my assumption correct ?
Question 2:
When flashing the selected firmware, am I obliged to do a 'wipe' or can I upgrade it without loosing personal data on the phone ? If I can upgrade, which options should be selected in LG UP tool ?
Question 3: How reliable is Backup and Recovery tool when it comes to making a backup before flashing and restoring from this backup after the upgrade ? I'd like to move to at least v20i firmware.
Thanks in advance.