Related
My phone currently updating to version 7008 - needs update to Zune too which is downloading first.
Was on 7004.
Will let you know what happens!
I can't see any changes...
Also no saving of the changes you make in Camera or so on...
Is this the update before March Update!?
Yeah, this is just an update to pave the way for future updates. You'll find nothing new here.
skycamefalling said:
Yeah, this is just an update to pave the way for future updates. You'll find nothing new here.
Click to expand...
Click to collapse
Is the Camera any better...? could be into the realms of imagination here but took a photo and it seemed clearer than previous efforts on standard settings. Phone also 'seems' a little zippier.
Not totally sure so guess things aren't that different.
Backup worked nicely though.
Mine is in the process of updating. The backup process takes a while.
I wonder if we can use someone elses backup to restore a phone? I only ask because I flashed my UK T-Mobile device with the unbranded Samsung one because it was said that it fixed Bluetooth problems. However, it has had no effect, and now I can't take my phone back to T-Mo because it's not running the original firmware. If I can get it back to UK spec, then I can take it back to a shop and swap it for a (hopefully) working one...
Done. It is only a preparatory update for the actual update containing copy and paste, improvements to Windows Phone Marketplace et.al. Ergo, it doesn't contain any new functionality and won't remove or hinder any installed jailbreak functionality.
Yup, more playing, definitely no changes I can find...camera taking a better photo just happened to be a picture in better light.
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. The phone evenually rebooted and Zune reported the following:
RESTORATION ERROR
An error prevented the restoration of your phone to its previous version. Your phone cant be used in its present condition and there are no restore points for it on this computer. Thephone might restart and return to normal if you disconnect it. For further assistance, contact your mobile operator.
ERROR CODE C101002E
Thanks Microsoft, that's a really helpful message. NOT.
I have manually updated to the latest Zune, rebooted my PC, rebooted my phone, and I get the same thing every time.
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Loconinja said:
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. The phone evenually rebooted and Zune reported the following:
RESTORATION ERROR
An error prevented the restoration of your phone to its previous version. Your phone cant be used in its present condition and there are no restore points for it on this computer. Thephone might restart and return to normal if you disconnect it. For further assistance, contact your mobile operator.
ERROR CODE C101002E
Sorry for that. I was afraid of this happening to me when the update stalled at the 7th step
Thanks Microsoft, that's a really helpful message. NOT.
I have manually updated to the latest Zune, rebooted my PC, rebooted my phone, and I get the same thing every time.
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Click to expand...
Click to collapse
Sorry about that. I was afraid of this happening to me, after the update stalled for an hour at the 7th step, so I disconnected. Luckily nothing happened to my device. But apparently several Omnia 7 are experiencing this.
Sort it out, MS.
First things first. I was updated Zune to the recent version, because I was curious it will resolve a problem with login user on one of my computers. One (Windows Vista) works fine, but another one, Windows 7 (both 32-bits versions) works fine with Zune + Market.
Silent Shark said:
I wonder if we can use someone elses backup to restore a phone? I only ask because I flashed my UK T-Mobile device with the unbranded Samsung one because it was said that it fixed Bluetooth problems. However, it has had no effect, and now I can't take my phone back to T-Mo because it's not running the original firmware. If I can get it back to UK spec, then I can take it back to a shop and swap it for a (hopefully) working one...
Click to expand...
Click to collapse
I've done the same. I have (branded) T-Mobile UK phone and decided update to unbranded one. I choose version I8700XENJK1 (but I tried another one before) - for me, one difference is language Dutch / Belgium if I remember correctly.
I've read this thread and I was wondering if my phone will find update... I had no information about this.
I return home, connect Omnia to computer and update process start immediately. I had no problem with update at all. Phone during update reboots twice (or more) and it looks stable. I haven't noticed any changes or improvements... maybe it's working a little bit faster, but maybe it's a auto-suggestion.
Loconinja said:
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. (...)
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Click to expand...
Click to collapse
Sorry for that mate. I really had not problem with update.
Loconinja said:
This update has bricked my Omnia 7.
When I connected my Omnia 7 to Zune today, I was notified of an update. Zune updated itself and quit. I restarted Zune and it informed me there was an update for my phone. I clicked update now and it got to step 6/10 rebooting phone. The phone evenually rebooted and Zune reported the following:
RESTORATION ERROR
An error prevented the restoration of your phone to its previous version. Your phone cant be used in its present condition and there are no restore points for it on this computer. Thephone might restart and return to normal if you disconnect it. For further assistance, contact your mobile operator.
ERROR CODE C101002E
Thanks Microsoft, that's a really helpful message. NOT.
I have manually updated to the latest Zune, rebooted my PC, rebooted my phone, and I get the same thing every time.
THIS IS NOT GOOD ENOUGH MICROSOFT. My Omnia 7 is now a brick.
Click to expand...
Click to collapse
have you tried taking back battery and then reboot again?
http://twitter.com/#!/WinPhoneSupport
hard-reset Focus, should be similar to omnia 7
http://www.technipages.com/samsung-focus-hard-reset-using-hardware-keys.html
Update error
801012DD Error code - we couldnt create a backup of your phone
Help !!!!!
Have you got samsung tools installed?
I have tried twice to install the update. Both times I got stuck at 7 or of 100 with 100%.
The only thing I have done my phone is to unlock it with chevron.
Altough I did have it in flight mode at the time to prevent relocking.
Do you think that would have affected anything?
Still nothing showing up for me yet. Those who got the mini update does your 3 button combo into download mode now work if you had a phone that didnt let it happen before?
Lordao
lordao said:
Still nothing showing up for me yet. Those who got the mini update does your 3 button combo into download mode now work if you had a phone that didnt let it happen before?
Lordao
Click to expand...
Click to collapse
Three button combo now gives me the rather scary option to Format or Cancel. I thought Cancel would be the way to go....
Successful Updaters: Please post your Firmware revisions
For those who have managed to get the update installed without error, can you please post here your firmware revisions. We may be able to work out which models are affected by the issue.
There are rumours that this update only affects firmware versions JI9 and JJ4 while the JK1 firmware is unaffected.
http://www.zdnet.com/blog/hardware/windows-phone-7-update-bricking-some-samsung-omnia-handsets/11501
gc48067 said:
Three button combo now gives me the rather scary option to Format or Cancel. I thought Cancel would be the way to go....
Click to expand...
Click to collapse
Are you saying the Download Mode is no longer accessible after updating?
scoob101 said:
For those who have managed to get the update installed without error, can you please post here your firmware revisions. We may be able to work out which models are affected by the issue.
There are rumours that this update only affects firmware versions JI9 and JJ4 while the JK1 firmware is unaffected.
http://www.zdnet.com/blog/hardware/windows-phone-7-update-bricking-some-samsung-omnia-handsets/11501
Click to expand...
Click to collapse
How can I check which firmware revision I am using?
Curious that I see no reports of install problems with Mango on the Dell....yet, especially with those coming from any of the Beta's. Has anyone seen any reports anywhere?
I'm here to report 1.
I was on Mango release build. I flashed back to 7004, and followed the update path to 7008, then 7403 then the release build.
When completed, the VP is in a reboot cycle triggered by any touch. I've done this several times.
The reboot cycle appears as follows:
The update completes with no error and the final reboot starts. On reboot, if no sim is in place, the sim error screen appears. This is normal. Touch the screen to close, forces a reboot, regardless of the update complete message.
Repeat process, this time with a sim in place, Update is installed, success messages appear in zune and on the phone. Disconnect phone, touch the screen, reboot occurs.
Repeat process. let the phone reboot until it reaches the desktop. connect via cable to zune. The device is recognized, but NO sync occurs. Go to settings/update and the current build is recognized. Restore is available, and will work.
if the screen goes dark, slide up or touch power will bring up the Lockscreen. Wifi does show, so does 3g and battery, but NO lockscreen release options are available. Again, any touch forces reboot.
I've reported to Microsoft, but was not considered serious since it cannot be reproduced.
Did the update with my HD7 so Zune, the downloads, etc are in place and working.
Getting back to 7392 is an option, so I am not dead in the water. But wanted to make sure reports of problems with the update were reported.
Since I flashed back to 7004, I lost the firmware updates. I noticed that the subsequent updates do NOT flash any firmware. According to MS EULA, all updates are cumulative...contain all previous updates. I have flashed from 7004, to 7008, to 7392 to 7304. During none of these flashes has the firmware been updated. the 105 firmware is maintained. I thought I read that the 7420 update included the 219 firmware....
anyone else having this problem?
http://forum.xda-developers.com/showthread.php?t=1280097
Please read my problem I have encountered and how I have solved, hope this helps.
After step 6 while trying to install Mango I recieve error code 801812c1.
I faced a problem while updating to Mango via Zune software.
My phone kept restarting while installing 7.10.7720.68 update. Stuck in step 8/9 for about 30 mins.
I did the following to recover, nothing worked.
1. I guess my phone got bricked, stuck in an infinite restart loop. I cancelled my update and removed the data cable. Removed battery and put it in again, tried restarting, still in infinite loop. Thanks DELL & Microsoft!
2. I read in Dell forum that I have to turn off my phone, then hold down Power Button + Volume Down + Camera button to enter PC download mode, so that I can restore it from Zune software. Trying it now.
3. Restore from Zune doesn't work, even its stuck at 0% for about 30mins.
4. After a few tries, removing battery, removing the SIM and doing some random stupid stuff, tried again the restoration seemed to work, I mean it started to restore.
5. Finally, I guessed its time for me to give up. Restoration failed with Error Code 8018009B. So its bricked for now.
6. I was greeted with this nice message from Windows Phone support tool
"Communicating with device. Please wait for Recover button to be enabled.
Support Tool version 4.8.2345.0
The tool cannot recover this phone. Please contact technical support."
I didn't even force the update, it was regular update which I was able to start from Zune without forcing it. NOW ITS BRICKED!
7. I took my phone to Dell Service Center, those guys couldn't figure out the problem, they said its a new phone here in India and don't have any technician to fix it.
I posted the same in Engadget, I got no response from anyone, so am posting here hoping to get a solution. I at least want my phone working, I'm happy without mango.
theonlyremedy said:
I faced a problem while updating to Mango via Zune software.
My phone kept restarting while installing 7.10.7720.68 update. Stuck in step 8/9 for about 30 mins.
I did the following to recover, nothing worked.
1. I guess my phone got bricked, stuck in an infinite restart loop. I cancelled my update and removed the data cable. Removed battery and put it in again, tried restarting, still in infinite loop. Thanks DELL & Microsoft!
2. I read in Dell forum that I have to turn off my phone, then hold down Power Button + Volume Down + Camera button to enter PC download mode, so that I can restore it from Zune software. Trying it now.
3. Restore from Zune doesn't work, even its stuck at 0% for about 30mins.
4. After a few tries, removing battery, removing the SIM and doing some random stupid stuff, tried again the restoration seemed to work, I mean it started to restore.
5. Finally, I guessed its time for me to give up. Restoration failed with Error Code 8018009B. So its bricked for now.
6. I was greeted with this nice message from Windows Phone support tool
"Communicating with device. Please wait for Recover button to be enabled.
Support Tool version 4.8.2345.0
The tool cannot recover this phone. Please contact technical support."
I didn't even force the update, it was regular update which I was able to start from Zune without forcing it. NOW ITS BRICKED!
7. I took my phone to Dell Service Center, those guys couldn't figure out the problem, they said its a new phone here in India and don't have any technician to fix it.
I posted the same in Engadget, I got no response from anyone, so am posting here hoping to get a solution. I at least want my phone working, I'm happy without mango.
Click to expand...
Click to collapse
Sorry to hear this....but, I think you'll be happier with Mango...About your phone...
If this was NOT a forced update, Dell may be able to help you. Microsoft has made updating 'almost' brick free. If you log into Zune, a backup is made, you're using the cable that came with dell, not using a USB hub, have a solid internet connection,and are NOT forcing the update, the blame for the problem could fall onto the update itself.
As part of a test team, I used to try and brick Windows Phones. The easiest test was to remove the cable during different phases of update. I was never able to brick the phone. Sudden power loss on the PC also was tested. Never was able to brick a phone. Apparently the download and transfer process is done in parts, meaning the update is downloaded, completed, then transferred to the phone, then installed. If the update is interrupted during download, no worries, or even transfer, no worries, reboot the phone, try again.
The process of install is done 100% on the phone so no bad cables, or shut down of internet can impact it. Even if connection between PC and phone are lost during the install portion, the message still tells you to check the phone. The install will continue.
that leaves only the relationship between the installation and the files itself. If the update package is corrupt or damaged, then it may not be able to successfully complete. If this is the case, you have an issue with Dell and Microsoft. Since Microsoft can only help you with software, I argue that you would have relief, as in possible phone replacement, from Dell.
Do you have a way of contacting Dell from India?
alodar1 said:
Curious that I see no reports of install problems with Mango on the Dell....yet, especially with those coming from any of the Beta's. Has anyone seen any reports anywhere?
I'm here to report 1.
I was on Mango release build. I flashed back to 7004, and followed the update path to 7008, then 7403 then the release build.
When completed, the VP is in a reboot cycle triggered by any touch. I've done this several times.
The reboot cycle appears as follows:
The update completes with no error and the final reboot starts. On reboot, if no sim is in place, the sim error screen appears. This is normal. Touch the screen to close, forces a reboot, regardless of the update complete message.
Repeat process, this time with a sim in place, Update is installed, success messages appear in zune and on the phone. Disconnect phone, touch the screen, reboot occurs.
Repeat process. let the phone reboot until it reaches the desktop. connect via cable to zune. The device is recognized, but NO sync occurs. Go to settings/update and the current build is recognized. Restore is available, and will work.
if the screen goes dark, slide up or touch power will bring up the Lockscreen. Wifi does show, so does 3g and battery, but NO lockscreen release options are available. Again, any touch forces reboot.
I've reported to Microsoft, but was not considered serious since it cannot be reproduced.
Did the update with my HD7 so Zune, the downloads, etc are in place and working.
Getting back to 7392 is an option, so I am not dead in the water. But wanted to make sure reports of problems with the update were reported.
Click to expand...
Click to collapse
Called Dell Mobility. Even though I could restore back to previous version, they offered to replace the device, which I took.
Kind of sad though, I've never had problems with wifi or anything else on this phone. In fact the only problem ever with a VP was me dropping the thing. I'm hoping the refurb I get will also not be a problem.
alodar1 said:
Sorry to hear this....but, I think you'll be happier with Mango...About your phone...
If this was NOT a forced update, Dell may be able to help you. Microsoft has made updating 'almost' brick free. If you log into Zune, a backup is made, you're using the cable that came with dell, not using a USB hub, have a solid internet connection,and are NOT forcing the update, the blame for the problem could fall onto the update itself.
As part of a test team, I used to try and brick Windows Phones. The easiest test was to remove the cable during different phases of update. I was never able to brick the phone. Sudden power loss on the PC also was tested. Never was able to brick a phone. Apparently the download and transfer process is done in parts, meaning the update is downloaded, completed, then transferred to the phone, then installed. If the update is interrupted during download, no worries, or even transfer, no worries, reboot the phone, try again.
The process of install is done 100% on the phone so no bad cables, or shut down of internet can impact it. Even if connection between PC and phone are lost during the install portion, the message still tells you to check the phone. The install will continue.
that leaves only the relationship between the installation and the files itself. If the update package is corrupt or damaged, then it may not be able to successfully complete. If this is the case, you have an issue with Dell and Microsoft. Since Microsoft can only help you with software, I argue that you would have relief, as in possible phone replacement, from Dell.
Do you have a way of contacting Dell from India?
Click to expand...
Click to collapse
Thanks alodar1..
I asked Dell to do a service and added that I don't need an replacement. The service guy said the phone is new and they are not trained to service this, so they would only do a replacement. I'm not ready to do a replacement, they ask me to go for international warranty, moreover they replace with factory refurbished phones.
BTW, I would like to know if there is anyway to format the memory card without removing or replacing. Right now I have another problem whenever I press the power button to boot my phone it directly goes to Software Download mode, the camera button was never pressed.
While trying to repair using Windows Phone Tool, I received this error "The tool cannot recover this phone, please contact technical support", so being a little curious I fired up .NET Reflector and loaded the tool to find out what was happening, I found that the this error is thrown if the phone is not Samsung made (see attached file). Is there any similar tool for Dell Phones?
*UPDATE 1* Is there anyway to force flash without using Zune, any third party tool, Zune seems to go to restore mode and can't find my phone. I have a feeling that erasing the contents of SD card will solve the problem.
*UPDATE 2* I did the registry trick and was able to see my DVP in Computer window. But instead of one DVP, I see 2 and both have storage of 3.75 GB each. But my DVP is 16GB, both DVP are empty. Previously I was never able to see my DVP even after registry patch. Now I have feeling that corrupt drivers caused the problem, yesterday I completely removed and reinstalled Zune Software, now the registry patch worked.
Please let me know with problem my DVP could be hardware fault or just the software. If its hardware then I'll go for replacement right away.
Just recieved my replacement VP. Ordered yesterday around noonish. Went downstairs to get the Motorola Xoom box that was delivered...and the VP was there too. Bonus....
Did not come with Mango....but....there's not a scratch on this thing....not a rub, not a bump...nothing. Still has plastic in places I doubt they would put plastic after refurb. I'm wondering if I got one of hte left over new ones....
Doesn't matter....Mango won't install no matter what...so...maybe I'll try ICS.
My Mango is now Ripe..
alodar1 said:
My Mango is now Ripe..
Click to expand...
Click to collapse
Nice to hear that!
alodar1 said:
Since I flashed back to 7004, I lost the firmware updates. I noticed that the subsequent updates do NOT flash any firmware. According to MS EULA, all updates are cumulative...contain all previous updates. I have flashed from 7004, to 7008, to 7392 to 7304. During none of these flashes has the firmware been updated. the 105 firmware is maintained. I thought I read that the 7420 update included the 219 firmware....
anyone else having this problem?
Click to expand...
Click to collapse
How do you flash it back to 7392? I need to flash mine.
theonlyremedy said:
Nice to hear that!
How do you flash it back to 7392? I need to flash mine.
Click to expand...
Click to collapse
not a flash, but a restore. I've always made copies of my backups ...
You an't reflash as the user above me already said, that said, the backups are stored in
=> %userprofile%\AppData\Local\Microsoft\Windows Phone Update
so for backing up your restore poiints you can copy that folder and then keep it.
theonlyremedy said:
Nice to hear that!
How do you flash it back to 7392? I need to flash mine.
Click to expand...
Click to collapse
I was just curious. I wanted to fix my phone. The backup restore didn't work. I was just looking for some way to flash it or at least format the SD Card, so that I reinstall OS and can get my phone working. After four days of trying to fix my phone, I finally gave up and sent it for service to Dell. I even copied a little bit of code from phone support tools and tried them, I was just able to get the phone details without any problem, Mango was installed in the phone, but still it didn't boot. It would be good if we find a way to touch the SD card and format it from PC, probably we'll be able to revive many bricked phones. I would be happy to join the project if some one starts it. I can write C# code.
Mine is an error during backup
Error Code 801812DC during backup
I also add new thread.
If anyone knows, please tell me what I need to do.
1. Install LG PC suite:
http://www.lg.com/uk/support/pc-suite
2. Connect the phone and suite will install update to support it.
3. Choose "Mobile device"->"Mobile device software upgrade"
PC suite will start download, then restart the phone and upgrade it to the last official version.
Then restore the root with Purple drake lite and you are good to go.
PC Suite gave me a lot of problems. It initially worked on my windows machine, but a reformat of that one and I can't install PC Suite on it anymore. Keeps giving me an NSIS error. PC Suite installed fine on my Macbooks but it won't detect the phone. grr
what worked for me was downloading the drivers and the LG Mobile Support Tool (do a search)
this won't let you sync stuff, but it will let you update your phone to the latest available software. For me, it turned out to be version g.
Purple drake root worked after this, and all software and most settings unchanged. Had to turn on xposed again though, and experimental settings with greenify to get everything just like it was before the upgrade.
Tuesday
306sh activated with MVNO, SA300 firmware, rooted, with TWRP recovery,
working fine for past 2 months.
For unknown reasons, it decided last friday (at home, none to low signal) to do a system update
(from SA300 to S7232). Phone - on the desk- just "dinged" and msg came up "updating
system software". I attempted to cancel, but it didn't respond. Less than a minute later, "Update Successful" msg. Didn't reboot, anything, settings showed S7232 firmware. (SA300 before,
i had done my weekly backup earlier that morning).
Since then, phone constantly reboots at the "Aquos" screen; after an average 8 hours of rebooting, it will boot to setup, the talking setup screen. Works perfect for about an hour then rebooting starts again. Let battery die last nite, tried again this am - same thing rebooting.
TWRP backups don't fix problem- weekly backup, i have 6 i've tried, factory reset doesn't fix, if i try to Software Update, it checks, tells me, "up to date".
I turn on wi-fi to use the phone from home, , guessing it did a ? hit & miss ? ota update since the
wi-fi was off when it attempted the update. Home is a very minimal signal area.
Any way to force it to take the S7232 update again?
(I could update over wi-fi if i had wanted, only i didn't want the update anyhow).
thanks, rik
I can give you a link for a backup with latest firmware, you will have to wipe data tho
https://mega.nz/#!fkommKgJ!fkiaT_p8ZFOBzyJpUdNAqOZlTWpt-5hNuQ-2vvA5tSQ
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Stick firmware updates are not compatible with custom recoveries
sent from rooted 306sh
Just home, thanks
Hi,
Thanks for the help, just home from work (rough), so i will plug the
Aquos in tonite and hopefully be able to try the file tomorrow,
(that 8 hour boot thing), just downloaded your file, i'm ready.
This is my take-to-work personal phone, sprint zone, and i missed it today.
Your help is really appreciated.
rik
Final note
thought i'd just post to let you know the phone obviously had big problems
-- it failed to start today -- just buzz on buzz off -- even after 4 hours charging,
all i could get was the battery dead screen, wouldn't come on at all.
Guess the real problem was with hardware, i laid it away in the junk phone box
in the attic, end of Aquos Crystal.
rik
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
can you help me?
badbadri said:
I downloaded this backup and yesterday to restore the firmware, works great, huge thank you , you saved me. :хорошо:
Click to expand...
Click to collapse
can you help me dude? :crying:
im already download this firmware and confuse how to restore it
im looking for how to root my phone but always confuse
and finally i installed supersu on playstore and reboot
im waiting for 5 minutes and not booting, and im plug my phone to pc and the computer request for formating all my storage
and my phone can enter the recovery mode and i go to wipe data & factory reset, and still not work
can you send to my email?
my email is [email protected]
thx ..
Question: My 306SH would not update (still at S8216). Could use your back up to update my firmaware?
After 306SH ph was acting weird, did a hard reset & saw system Software updtd to S7232, & unk file in Misc (.eCtcQjbu1dgnvtFnvnr6yepTp1M=) I then installed Malwarebytes & scan detects this S7232 software update as malicious malware Android/PUP.RiskyTool.Agent.ay (dm.redbend) "/system/priv-app/fotaClient.apk". When going to System to do an manual update, Malwarebytes popups w/same msg every scan "Software App", even aft reboot 2days ago 7/12/2017. And phone wont let me create new google acct. An error that "google account mgr not working" popup & I see that same unk file reappears. Ph not rooted -XDA says "there's no root for 306SH that works">see XDA blog 'Root for Aquos Crystal 306SH ONLY'.
Go to the Sharp USA website for the 306SH firmware, and see what firmware you are on.
Download the firmware from the versions higher than yours, and if there is a repeat, notably "kernel.img", download the most latest version of it.
Then, plug your device into your computer, make sure you have the proper drivers installed for the Sharp Aquos Crystal installed on your computer. Boot your device into bootloader. Go to a terminal, cd to the directory where you downloaded your .img's from the website, and do
fastboot flash kernel kernel.img
Ex.
fastboot flash foo foo.img
And you can flash all the latest updates. When done, exit the terminal, make sure the device is unmounted, unplug from computer, and reboot your Crystal.
Hooray, it should be updated!
turkbot said:
I can give you a link for a backup with latest firmware, you will have to wipe data tho
(Mega-nz link expired)
This is a full backup from newest firmware but you need to wipe data before boot
sent from rooted 306sh
Click to expand...
Click to collapse
Turkbot, I hate to beg on my first XDA post, but is there any chance that you still have that ROM and is there any chhance that it's not TextNow loaded? I've got TWRP, Busybox, SuperSU, Xposed, and I've tried every which way to edit the prop, tweak it with modules, unlock etc (it even works with my Sprint MSL, but crashes when I try to manually set my MDN and MSID) It just says no SIM/no service and refused to give me any signal except for GPS and WIFI without one. Countless 'techs' over the phone and 3 different Sprint repair stores claim they don't have the stock firmware and Sharp actually claims that the reason they can't help me with the firmware is their contract with Sprint forbids it.. If you still have the file or a TWRP / Titanium etc backup you would be my savior.
Just got my Axon 7, shipped from DE to UK, thought I'd try manual software update.
Current version listed as ZTE A2017GV1.0.0B06
It times out with Network Unavailable despite the fact it is connected to WiFi and Chrome works fine as well as everything else needing internet connections.
I am on Three UK, haven't tried updating without a SIM ... is that worth trying? I did see at initial setup I was prompted to accept some sort of 3UK profile though I assumed this is just APN/MMS stuff.
Anyone else having similar problem trying to update?
I see talk of updating to B08 etc, from 2017G --- is 2017G same as 2017GV1... wouldn't want to assume anything this early on in my game
TIA for any tips/advice.
Am really liking this phone though, might be nice to get latest update for security mainly, not sure if many features are added?
Same issue here as it happens, though I'm currently trying to update WITHOUT a sim (didn't appreciate it was nano so new one on order!).
I was thinking it maybe needed one to be present to update, but clearly that's not the case.
nstirton said:
Same issue here as it happens, though I'm currently trying to update WITHOUT a sim (didn't appreciate it was nano so new one on order!).
I was thinking it maybe needed one to be present to update, but clearly that's not the case.
Click to expand...
Click to collapse
Can't speak to the EU version, but I was surprised when my A2017U would not complete initial setup (& update) without the SIM, although wifi was strong. All completed quickly as soon as I popped in the SIM.
Hi,
I have the same issue here.
I've just bought A2017G from Italy (Amazon) and I live in France. Can't have the upade to B08. There is always this message "No network" after a minute of searching. I tried with 4G and Wifi and there is the same issue!
Also can't connect
Same issue here. I am already on B.08 and have wifi/Sim in place.
Mysterious problem
I have tried many solutions but I wasn't able to update :
- used three different sim cards from 3 operators
- removed sim card and worked only on wifi
- used VPN
- tried to update via SD card form the update page and from recovery
... Unsuccessful !
Anyone have idea?
I'm also having the same problem. I live in Sweden and I just got the phone today. Would be nice if I could update sometime soon.
A2017g b06
Greenland here, I also have problems with the connectivity
Maybe ZTE is updating its servers so that the updates can finally deploy at the same time, the same version, for everyone.
Or, maybe... they are silently getting rid of Adups and moving to another kind of upload process, before **** hits the proverbial fan.
Also, Global Axon 7 here, brought via Amazon.es, sent from Germany and now used across Portugal/Spain. Running 0B08.
deoki said:
Maybe ZTE is updating its servers so that the updates can finally deploy at the same time, the same version, for everyone.
Or, maybe... they are silently getting rid of Adups and moving to another kind of upload process, before **** hits the proverbial fan.
Also, Global Axon 7 here, brought via Amazon.es, sent from Germany and now used across Portugal/Spain. Running 0B08.
Click to expand...
Click to collapse
I can understand that, but even if we put the B08 update file downloaded from ZTE support in SD card, the update can't be processed.
Hello, I had the same problem, I reinitialized the Axon 7, and I copied the file update.zip B09 on the phone, it recognized and installed the file (I was on the b08 before)
Hallo, i have the same problem with update, I have B06, somebody can give me a link to download the latest firmware and how to install it.
Yansin said:
I can understand that, but even if we put the B08 update file downloaded from ZTE support in SD card, the update can't be processed.
Click to expand...
Click to collapse
hmm I put a b09 in the sd card and it updated no problem
Solution found!
I’ve already found the solution for the manual upadate from SD card and it’s easy to do.
Theses instructions are not mine and I’m not responsible of what you do with your phone. I found them inside the update file that I Downloaded then I unzipped.
You will find a PDF document called “ZTE A2017G Upgrade Guide (through an SD Card).pdf”. You can use it to do the upgrade step by step.
Till now, all was OKEY: backup is very quickly with Zte app. The update take about 5 minutes, than the phone restarts automatically.
If you cannot find the B08 update file, try to download it from here: http://www.ztedevice.com/support/detail?id=98CEB24F9FFD433EA99EC424163149A6
Here are the steps (exactly as mentioned in ZTE Upgrade Guide)
ZTE V7 Upgrade Guide (Through an SD Card)
1. Backing Up the Data
1) Download the upgrade package.
Open http://www.ztedevice.com.cn/support and download the upgrade package (update.zip) that matches your phone model. If the downloaded package is not update.zip, unzip the package to obtain update.zip.
Ensure that your micro SD card is at least 3GB.
2) Remove the SIM card before the upgrade. Back up the data and APPs in your phone by using the built-in Backup function. To enable the built-in Backup function of your phone (an SD card must be inserted), select
Backup and Restore from the main menu。
3) Perform data backup.
Note:
You should not remove the SD card during the backup process. To avoid data lost, it is not recommended to cancel the backup process.
4) Verify that the update.zip file in the root directory of the SD card
matches the model of the phone. Do not modify the file name and extension name of the files in the upgrade package.
5) Verify that your phone has enough (at least 30%) power. Charge the phone if required. To avoid data lost or upgrade failure, it is not recommended to upgrade your phone through an SD card when the phone is being charged.
Note:
You should not perform any other operation on the phone during the upgrade process. To avoid upgrade failure, do not forcibly remove the battery.
A normal upgrade should be completed in 2-3 minutes. If the phone does not reboot or show any response in three minutes, you should perform the upgrade process again. If the phone cannot be started, perform a forced upgrade. If the forced upgrade does not work, you should contact an after-sale service agent for support.
2. Upgrade Description
There are two upgrade methods: normal upgrade and forced upgrade.
If the phone cannot be started properly, for example, the phone cannot be started, or the phone does not enter stand-by state, perform a forced upgrade. If the phone can be started properly and the Settings menu can be selected, perform a normal upgrade.
3. Upgrade Steps
A. Normal upgrade (the primary upgrade method)
1) Download the upgrade package that matches the phone model from ZTE official website (http://www.ztedevice.com.cn/support/), extract update.zip from the package, and copy update.zip to the root directory of the SD card (the file name must be update.zip
2) Select System Manager > File Manager> SD Card from the main menu, and verify that the update.zip file in the root directory of the SD card is proper.
3) Tap the main screen is displayed. Tap and select SETTINGS >All setting > Updates>,
4) Click INSTALL, The phone automatically powers off and reboots. the SD
card upgrade screen is displayed,
After the phone is upgraded, it is rebooted again. After the phone starts properly, it is recommended to manually restore the phone to its original factory default settings. The phone is upgraded properly and can be used.
B. Forced upgrade (for the phones that cannot be started or the phones that cannot enter standby state)
1) For a powered-off phone, press and hold both the volume key + and power
key to enter into Recovery mode.
2) Press the volume key - to select apply update from sdcard, and press the power key to confirm it.
3) Press the volume key - to select the update.zip file, and press the power key to confirm it. The phone completes the upgrade process in about three minutes.
4) On the Upgrade Complete screen, select reboot system now and press the power key to confirm it.
4. (Optional) Restoring the Data
If you have backed up data before upgrading your phone, restore the data.
1) Backup and Restore important user information.
2) Perform data restoration.
Note:
Do not remove the SD card during the restoration process. To avoid data lost, it is not recommended to cancel the restoration process.
An interesting thread: http://forum.xda-developers.com/axon-7/how-to/manual-updating-a2017g-t3519104 !
Thanks, but i tryed to install this update but I get an error that it is not for my phone, i have ZTE A2017G_1817 buildnr. ZTE A2017GV1.1.0B06
Have I don anything wrong or do I need an other file
Regards
Same problem on my axon 7 a2017g - updated via updater from b06 to b08 - network unavailable trying to check update to b09
Same white me, then I tryed it with the downloaded updat.zip from B08 and he start the update bute later stopt whit the message this file is not for my phone ??
Where can I download the B09 update.
keesvl55 said:
Same white me, then I tryed it with the downloaded updat.zip from B08 and he start the update bute later stopt whit the message this file is not for my phone ??
Where can I download the B09 update.
Click to expand...
Click to collapse
The file is on ztedevice (link in thread) but i think (as some of other users) that this patch is only for Spain - don't know that for 100% but most ppl that can upadate it with OTA are located in Spain. Also I still get "network unavailable" when I trying to check update (location Poland, phone from UK). But you should can update from B06 to B08 as I can without any doubts via OTA.
MrMD69 said:
The file is on ztedevice (link in thread) but i think (as some of other users) that this patch is only for Spain - don't know that for 100% but most ppl that can upadate it with OTA are located in Spain. Also I still get "network unavailable" when I trying to check update (location Poland, phone from UK). But you should can update from B06 to B08 as I can without any doubts via OTA.
Click to expand...
Click to collapse
Here the problem is solved, this morning the ota update worked en now he is installing B08.
I downloaded B09 en wanted to go install it and than the give me the original B08 update in the screen, let see how it works.
As for 1.01.2017 update check start working for me - no more "network unavailable" just "up to date" at B08 a2017g.