Database Users

SOMEONE HELP PLEASE!! stuck in bootloader

alright, im brand new at this and i was trying to unlock my htc 6800 and was using olipro 2.40 then when it ended my phone stayed stuck in bootloader mode.. :/ it says TITA100
SPL-2.47Nochem Titan SPL EVI
CPLD-9
and at the bottom either USB or serial.
can someone pleeease please help me out here.
its a new phone!! :

noob18 said:
alright, im brand new at this and i was trying to unlock my htc 6800 and was using olipro 2.40 then when it ended my phone stayed stuck in bootloader mode.. :/ it says TITA100
SPL-2.47Nochem Titan SPL EVI
CPLD-9
and at the bottom either USB or serial.
can someone pleeease please help me out here.
its a new phone!! :
Click to expand...
Click to collapse
Yea no problem, first start from a freshly rebooted PC. Now just put the phone in bootloader again while phone is unplugged. Now disable USB connections in Active Sync (icon on computers taskbar). Plug it into the computer on a main usb port and now and give it a couple seconds. Look in your C: drive for a folder Named Oli pro, or titan something of that nature. Open it and run ExitBL.exe it will issue the commands to the phone exiting bootloader. If you still cant find it, then just use WinRAR or 7zip to extract the contents of the Olipro240.exe into its own folder then look for ExitBL.exe
What you missed that the olipro prompt doesnt tell you is right before the very last step you are supposed to disable USB connections. I think when it tells you to unplug and plug back it you let it do its thing until its done flashing, then before it says press enter or a key (last step) you disable usb connections and then press a key to end. That will run ExitBL like its supposed to. Hope I have helped.

Help! HTC Surround Failed to restore!

Ok, Well I Unlocked my HTC Surround so I could update. I did the whole process and then I was on NoDo update! I was very happy, But then I wanted to Restore it so I could Sideload once again. So I started the restore and the percentage Hung at 0, and Then I got error code 801812E0! so I was like ok I will just not sideload for a while..
Then I boot up my phone and a Picture of a phone Pops up with a usb saying connect to your PC (It didnt really say it.. you know what I mean) So. I plugged it in to my PC again and it said to restore it... So I said ok and I got the same Error 801812E0 Now I cannot use my phone Please will someone help me.
Also I am only 15. My Parents will be very pissed if they found out what happened.. but I need to get this working ASAP.. I cannot call ATT Ive tried everything.. Please someone respond

I think you should reflash your phone in order to get it work.
Go here: http://forum.xda-developers.com/showthread.php?t=943714 and download your compatible rom, then reboot it into bootloader (Power + Volume Down), connect to PC, and reflash ^^
Hope it help

Thank you for your concern, but How am I supposed to figure out what type of ROM I need if I have no access to my phone to see? Haha

funnydude35 said:
How am I supposed to figure out what type of ROM I need if I have no access to my phone to see? Haha
Click to expand...
Click to collapse
Use the Cingular ROM. I flashed my Surround from AT&T and it went OK, the ROM reverted to 7004. After that you can unlock your phone using ChevronWP7, use the fix to prevent it from re-locking again and then update to NoDo.
The rapidshare link from Ansar's post is down. I uploaded the Cingluar ROM to multiupload so you can fix your phone. Download it.
The instructions to flash your phone are as follow:
1. Unzip your downloaded *.zip file in a separate folder
2. Press and hold power-on/off button to power-off the phone
3. Press and hold volume-down button and then press power-on/off button to enter bootloader mode
4. When your phone enters the tricolor screen bootloader mode, release volume-down button
5. Connect your phone to your windows 7/vista/xp pc/laptop with a usb cable
6. Verify that your phone will be identified and relevant drivers will be installed by windows os of your pc/laptop
7. After completion of (6.) above, check the usb message connection on your phone screen
8. To flash the new ROM go to your pc/laptop folder of (1.) above
9. Double click on the ROMUpdateUtility.exe file and strictly follow the instructions on your pc/laptop screen
Click to expand...
Click to collapse
Please remember not to interrupt the flashing process! Do not disconnect the phone or play with it while it's being flashed. Try avoid using your computer at all and close all other applications before starting.

ertz, Noob here. I updated with the chevron updater and it seems that may be problematic. I'm using an at& branded surround will flashing the cingular rom allow me to recieve updates through zune?

gentry33 said:
ertz, Noob here. I updated with the chevron updater and it seems that may be problematic. I'm using an at& branded surround will flashing the cingular rom allow me to recieve updates through zune?
Click to expand...
Click to collapse
I'm pretty much a noob too, I just learnt a thing or two in the past few weeks
You will have no problems at all with your carrier if you flash your AT&T phone using the Cingular ROM. The SIM-lock will stay the same as it is (either locked or unlocked,) the phone will return to its factory settings.
Being restored to its factory settings will mean that you'll get the updates through Zune when AT&T decides it's time for you to get them. You can, however, unbrand your phone to receive the updates almost as soon as they're released. Remember that you'll need to "developer unlock" your phone before you can unbrand it.
I have my SIM-unlocked Surround on Movistar (Argentina carrier) and I can get the updates through Zune after unbranding it. No Chevron Updater or other hacks to get the updates.

Thank you guys for your help <3 I Actually just went and traded it in for another one If this happens again I will use this method Thank you much!

[q] help::arc boot loop and force close.

my new arc dosn't start up and loop.that means it starts until sonyericsson logo on screen and shutting of again and again.
And if it looks like it starts up than com.android.phone must be force closed.anybody knows how to repair the system.I tried seus but no results.
thanks in advance

i have the same problem ...
u used the global root and u had 2 bad blocks right
help me tooo

Hard Reset Your Xperia Arc
- back + menu (as left and right) then power
- Home + Volume Down then power
OR...
Unlock Bootloader and Flash New Rom
- Unlock BootLoader
- Use x10flashtool.exe > Flash Original Firmware
- if u forget to tick usb debugging mode Click "fastboot.exe"
Before Flash Fimware to skip that require

can u explain little more detials ... becuz im new ^_^
can u help me more heheh
i use lt15i
i want the link for the original fimware
i miss my arc

hard reset doesnt work.i will try Unlock Bootloader and Flash New Rom.i hope it works

flash the firmware and u will fix it
thx to ppl not for me ^_^

magicli said:
hard reset doesnt work.i will try Unlock Bootloader and Flash New Rom.i hope it works
Click to expand...
Click to collapse
FYI,
you don't need to unlock bootloader to flash stock rom.

i try flash stock FW but i get this error
"22/035/2011 23:35:18 - INFO - Then go to application settings
22/035/2011 23:35:18 - INFO - turn on Unknown Sources and Debugging"
I cant enter the application settings because phone doesnt turn on.please help me what can i do.

[Q] Flashing rom for htc touch HD

hey guys..hope to be in a good health
this is my first theard ever here.. and honstly i found xda more useful,more likly to me rather than any websits else..so i'd like to thank guys here "u rocks guys "
now i'd like to ask about flashing anew rom for my HTC touch HD t8282
running win-mo 6.1 with arabic supported language..touch flow 3d..etc
but now i'm bored with original rom and i was looking for some roms around here and i found what i excatly wanted
but..(i'm sorry for that question :$) i dun know how to flash a new rom to my blackstone..i used search fuction and dummies guide also but..rofl i didn't get what they were takin about
so i was asking if someone could provide me with smplified way to install a new rom using HSPL
Thanks in advance and sorry for z long topic ​

basically, flashing a winmo phone is an easy process:
1. bootloader mode (power on with VOL- button pressed)
2. flashing
3. hard reset
however, there are a few preparations if your device was never flashed before, you need to install hspl on your phone and make sure you have the correct driver installed on your pc. the driver for the device in bootloader mode might vary from the driver used to sync the device, when switched on.
1. the driver:
if you have windows xp, connect the phone in bootloader mode and look, whether it changes from serial to usb on the bootloader screen, you should be fine by then.
on windows vista/7 you connect the device in bootloader mode, and might actually take some time for it to download another driver from windows update. if it changes from serial to usb, first try to connect using mtty, before attempting to flash, because the connection might not yet be stable and you might want to have a look at the thread (ref updating the usb drivers).
2. hspl
to quote the dummies' guide thread:
(HSPL2a) Place your phone into its bootloader.
(HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
(HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting).
pretty easy, in other words, just connect the device in bootloader mode and run the package on the pc, it will unlock the spl and flash hspl.
if all went well, you are ready to flash, download any rom you like from the rom development section, and flash it using the .exe file that comes with them, might be updater.exe, blackstone RUU.exe or something else. if your rom download only consists of an .nbh file, like ruu_signed.nbh or BLACIMG.nbh, download advanced RUU and use it to flash.
alternatively, if this is to complicated for you as a beginner, you can rename the rom file to BLACIMG.nbh (if it is not already named like that) and put it in the root of the sd card, by then entering bootloader mode, it should find the rom and give you detailed instructions on how to install it.
last step, hard reset, as described in the original manual, switch on, while pressing VOL- and VOL+ and follow the instructions onscreen.

Chef_Tony said:
basically, flashing a winmo phone is an easy process:
1. bootloader mode (power on with VOL- button pressed)
2. flashing
3. hard reset
however, there are a few preparations if your device was never flashed before, you need to install hspl on your phone and make sure you have the correct driver installed on your pc. the driver for the device in bootloader mode might vary from the driver used to sync the device, when switched on.
1. the driver:
if you have windows xp, connect the phone in bootloader mode and look, whether it changes from serial to usb on the bootloader screen, you should be fine by then.
on windows vista/7 you connect the device in bootloader mode, and might actually take some time for it to download another driver from windows update. if it changes from serial to usb, first try to connect using mtty, before attempting to flash, because the connection might not yet be stable and you might want to have a look at the thread (ref updating the usb drivers).
2. hspl
to quote the dummies' guide thread:
(HSPL2a) Place your phone into its bootloader.
(HSPL2b) Run HSPLWrapper_Blackstone_156OliNex.exe from the download in step (HSPL1a) and follow it as normal.
(HSPL2c) If successful, go to step HSPL3. If the flashing process sits at 0% and you get Error [260] connection after some time, go to step (Troubleshooting).
pretty easy, in other words, just connect the device in bootloader mode and run the package on the pc, it will unlock the spl and flash hspl.
if all went well, you are ready to flash, download any rom you like from the rom development section, and flash it using the .exe file that comes with them, might be updater.exe, blackstone RUU.exe or something else. if your rom download only consists of an .nbh file, like ruu_signed.nbh or BLACIMG.nbh, download advanced RUU and use it to flash.
alternatively, if this is to complicated for you as a beginner, you can rename the rom file to BLACIMG.nbh (if it is not already named like that) and put it in the root of the sd card, by then entering bootloader mode, it should find the rom and give you detailed instructions on how to install it.
last step, hard reset, as described in the original manual, switch on, while pressing VOL- and VOL+ and follow the instructions onscreen.
Click to expand...
Click to collapse
thnx 4 help really usefull and easy,i apperciate it
thnx again

@ blackspyker
did you successfully flash the hspl and a new rom?
(just seeing if this thread is solved or not)
Rn

just like me dear, please help us. but mine is English version
just like me dear, please help us. but mine is English version
blackspyker said:
hey guys..hope to be in a good health
this is my first theard ever here.. and honstly i found xda more useful,more likly to me rather than any websits else..so i'd like to thank guys here "u rocks guys "
now i'd like to ask about flashing anew rom for my HTC touch HD t8282
running win-mo 6.1 with arabic supported language..touch flow 3d..etc
but now i'm bored with original rom and i was looking for some roms around here and i found what i excatly wanted
but..(i'm sorry for that question :$) i dun know how to flash a new rom to my blackstone..i used search fuction and dummies guide also but..rofl i didn't get what they were takin about
so i was asking if someone could provide me with smplified way to install a new rom using HSPL
Thanks in advance and sorry for z long topic ​
Click to expand...
Click to collapse

download this, extract all the files, take micro SD out of device, connect device to active sync and then run HardSPLWrapper_Blackstone.exe on your pc, it will now start to flash a new SPL, when complete confirm you got it installed, go into bootloader mode (tricolour screen! {hold volume down and press the reset button under the back cover}) now verify the screen shows 1.56.OliNex, which is the new Hard-SPL version.
when complete you will be able to flash any rom to your touch hd/blackstone
note: if you do not flash a new rom you will have graphical issues with the current rom, however this gets fixed as soon as you flash a new rom
if you have any trouble, click me and go to the first post
good luck

Unlock bootloader Easy tutorial

NOW THREAD IS UPDATED AS PER MY SENIOR SUGGESTION:trlAltDelIrl,sgt. meow,fotak-x,IAmNice
Hi Newbies,
I think all newbies are confused about Boot loader. The following instruction will help u and easy to do unlock.
First check ur software version 11w026 or below version.if its below 11w026 do the following instruction.
Requirement:
1.S1 tool http://www.mediafire.com/?iwnjno9hirpgcm1
2.Mmz toolhttp://forum.xda-developers.com/attachment.php?attachmentid=715058&d=1315609618
Steps:
Disable Antivirus first.
Install Gorden drivers first, then only flash tool will detect ur phone...!
Step1:
Switch off ur phone.Open S1 tool and click do job. Hold back button and connected to use port,
Now the s1 tool will do the job.
Check ur boot loader unlocked or not:
you will see something like RUNNING S1_EROM VER "R8A029"
small r which means your bootloader is unlocked.
Step2:
Open Mmz file and extract that.
Switch on ur phone. and Run mmsc_semc.cmd..It will start to Unlcok the bootloader.
Wait till finish. Now ur phone will be unlocked successfully.
You r the only responsible if ur Awesome xperia bricked..:silly:
Like Do not Run MMSC-SEMC2.CMD. It will lock ur sim certificate..
If ur have problem in Sim Like"No SERVICE" after unlock the boot loader, Re lock the boot loader and do it again..
Be Careful..Its your own risk,,You are the only responsible,If ur lovely xperia Bricked..!
Relock the boot loader Tools:
St tool:http://www.mediafire.com/?jeo3c1xt988f822
Relocking bootloader steps:
Launch the s1tool.exe(Link Given Below)
Click restore button on s1tool
Turn off the phone
Connect your phone in flash mode (press back button while plugging your usb untill green led blink)
Wait till it finished relocking your bootloader.
The phone will restart
Check Bootloader Relocked:
Repeat the step above but on no 2 step you choose identify not restore if the previous relocking process successful you will see something like RUNNING S1_EROM VER "R8A029" notice the CAPITAL R.
Unsuccessful - you will see it with small r which means your bootloader still unlocked.
Next:
Flash tool:http://androxyde.github.com/
Flash stock kernal and stock rom
Stock rom:http://www.multiupload.com/VKNI6Q6ET5
THANX SPYDEX
And also Spl thnx to CtrlAltDelIrl,sgt. meow,fotak-x,IAmNice(Giving a nice idea to update this thread..)

Gracias por el tutorial ^^ :good:

Unless you are giving complete instructions and informing people of the risks you should not be giving tutorials like this.
On top of that you don't even check your spelling! The drivers are wrong! They are Gordons Gate not garden!
You fail to mention that if people have a simlock on their phone it will be dead using this method.
Please update or remove your post!

CtrlAltDelIrl said:
Unless you are giving complete instructions and informing people of the risks you should not be giving tutorials like this.
On top of that you don't even check your spelling! The drivers are wrong! They are Gordons Gate not garden!
You fail to mention that if people have a simlock on their phone it will be dead using this method.
Please update or remove your post!
Click to expand...
Click to collapse
he has also failed to provide the link to the tools.

garden drivers hahahaahhaah
install it to make your shovel work right :good: :good:

Totally agree with you all.
@fotak-x
LOL.

IAmNice said:
Also there are 3 threads about bootloader which are even better then this one.
Sent from my XPERIA X8 using xda app-developers app
Click to expand...
Click to collapse
sgt. meow said:
Totally agree with you all.
@fotak-x
LOL.
Click to expand...
Click to collapse
Thread updated as per all suggestions..

Thread locked as there is already a guide for it.
Sent from my GT-I9300 using xda premium