Database Users

Black Screen Vibrant

Okay, I know there is many post about this, but none seem to answer my question or help me. I have a Vibrant and I've been searching this site along with google to help fix my phone.
I brought it off a friend so warranty won't happen since T-Mobile is being asses. My phone is suck on the black screen after it passes the big S logo. It stays black, and I get 4 lights bright on the buttons. I've reflashed my phone with Odin and it has not worked. I think it correctly as well. Com3 was on, ran the stock Vibrant with Pitt and Tar with PDA one. That had only got my phone off the complete brick that my phone had gone through, when It wouldn't even turn on.
I got the brick off and now I'm stuck with this program. I did have a one click root fix and I was trying to mess around with clock work. To help answer some questions. No, I can not boot into recovery mode. Yes I have cleaned and wipe out cache. Yes I can go into Download mode, but its pointless since odin doesn't do much for me. No I can not go into the phone since the black screen is there and no I can not flash a update file for some reason.
Saying that, I would be grateful for some help and before hand I thank anyone who comes across this even if they don't help, just for taking time to read this and maybe referring someone else to help me or even pointing me in the right direction. Thanks and once again PLZZZZZZZ HELPPPPPPPPPPPPPPPP.

No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?

zephiK said:
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
Click to expand...
Click to collapse
Okay. One thing I notice when I try to put my phone into the Android system recovery it says this "
-- Movi_check start .. !!
checksum confirmation need _checksum [1301305579]
MBR _Chksum in header :4.1
MBR checksum : EC0063A432AFDBA2B104C3F0DF52FE3D
MBR Checksum Error
Movinand Checksun Confirmaton Fail
-- movi_checking done!...
# MANUAL MODE #
-- Appling Muti - CSC ...
Installing Muti - CSC "
Another thing, I hit reinstall packages and It says "
-- install from sdcard...
finding update package ...
opening update package ...
E: cant open /sdcard/update.zip
(no such file or directory)
installation aborted.
the drivers I use are the samsung Vibrant drivers for windows 7 64. I know it works because the phone before didn't come up when I didn't use the driver. It always failed and when I install it, than it read my phone. When I connect the phone to the computer, the phone does read it and on odin, it says com 3 in yellow. I than Install pitt and install tar.
The tread you sent me too, I actually went through there before. Both of those drivers didn't work but I found one for windows 7 and it started working for my computer. I could tell it works because the computer actually reads the phone and so does odin. Like I use odin right because it goes through the phone and than says pass at the end. so like WTF lol. I'm pretty sure I'm doing it right tho
Another thing. I used odin a few seconds ago, got the phone to run and it went through the green bar and a blue screen now saying reset came up. My phone than went into androids recovery mode but it started to wipe out data. When doing so, the data said wipe fail. It booted up and now back to the start. Black screen, 4 panels on the bottom lit up and nothing to do.
I'm starting to think it has to do with clockwork I did a partition in it and every since than my phone has been doing this blackscreen with 4 lights.

ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work

same thing here, know idea, odin says everything passed but still the black screen and four buttons. i also noticed that the sound and tmo splash screen are not in sync. no idea ???? help would be great!!!!!!!!!!! same errors though. also from the partion feature in clockworkmod.

i assume your on windows i don't keep up if there is a working version for mac. Anyway, make sure your update.zip is just named update DO NOT add .zip yourself or the phone for what ever reason sees .zip.zip. I would also go ahead re download your odiin files just to make sure non of them are corrupted for what ever reason.

files all check out good, i can't gain access to the phones sd, i have flashed this thing with every checked build i could find, all with the same result. the master boot record is not adding up.? still have know idea.

have you tried using this.. http://forum.xda-developers.com/showthread.php?t=740558
this work for me and was able to flash to stock..

somebody please help I'm experiencing the same problem as the OP? can somebody point me in the right direction I've been looking for hours

Instead of making us read the entire thread perhaps you could summarize your specific problem.
My initial impression goes like this.
1. Get into download
2. ODIN back to STOCK 2.1
Run odin in admin mode
Use rage against the cage
After getting back to stock Recovery 2e go ahead reroot and flash away
Sent from my SGH-T959 using XDA App

Don't know if this is still an issue, but here's how I fixed it.
http://forum.androidspin.com/showth...yo-That-does-not-Brick!-Downgrading-Is-Fine-)
Downloaded this file knowing it wouldn't work, Had ODIN flash it and got into this weird recovery screen. Just pulled the battery and then flashed back to stock using ODIN.
Helped me out.

Use 512 .pit and True Stock 2.1 from this post
http://forum.xda-developers.com/showthread.php?t=747335
And quit messing with your phone! lol

This is how i fixed mine too, my phone would go through a seemingly normal start up, but the UI would never load and it would stay on a blank screen.
Flash Eugenes373s froyo that doesnt brick. once it brings you to the recovery screen, pull the battery and once again use odin to flash back to stock. the phone should boot up now.

mnm0071980 said:
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
Click to expand...
Click to collapse
Hey i just encountered the same exact problem four days ago except i flash with odin it says pass but im still stuck on a black screen after the s logo my problemwas encountered by tryig flash a kernal. Please tell me that u found a solution

[Q] problems with cyanogen azure

Hi
Ive just installed my first rom which is azure from cyanogen.
My problem is that i cant install appz. My browser displays something like it cant read page. Ive tried different programs and the barcode scanner.
I can only install by connecting to computer and install a apk using sdk developer.
Have somebody else experienced this problem or know what to do?
By the way, it writes you dont have permission to view this site and the it shows the url

you have to flash Gapps too, wich you can find on his webpage : )

*twitch, twitch*

great! Ive found it... thx a lot

HELP again
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?

thegenni said:
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
Click to expand...
Click to collapse
What if you tryed and search a bit on the forum, everything you've asked so far is alleredy answered in several threads in here. "Questions are placed in general.."

thegenni said:
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
Click to expand...
Click to collapse
If you flashed Azure, you have also on your phone ROM Manager. You can open ROM Manager and install the gapps from there (select "Install ROM From sdcard").
Or, if you're at the screen with the phone and the red triangle, you can keep pressed Vol UP + Power till a blue menu appears. Choose "flash update.zip" from that menu and you'll end up in the green recovery menu from which you can also select the gapps zip to flash.

HpX said:
What if you tryed and search a bit on the forum, everything you've asked so far is alleredy answered in several threads in here. "Questions are placed in general.."
Click to expand...
Click to collapse
I hadnt written a post here unless I was having a hard time finding it. Notice the time between the posts...... Thats the time ive spend searching for a solution.
Dont post in a thread just to make an angry outburst...... Atleast give me something helpful:-(

thegenni said:
arggghhhh I cant get in recovery mode...
It just shows a phone with a red triangle....
Can anybody help me, so i can flash the zip-file(gapps) to my phone?
Click to expand...
Click to collapse
How old are you? 12? Geez.. Where did you search for it? Wikipedia? Read Rapier's post, the answer is there.

[Q] sprint galaxy s tablet

hello everyone.... fairly new too here but i have post before back in my mugal days..
Ok im having a big problem with my tablet, after a factory wipe (reset), and after boot up i get the introductory screen but the keyboard wont pop up. I then i figure let me just skip this part.
Get to what supposed to be the home screen but i get nothing just a black screen, but i am able too see notification bar with time and battery status but below is just black. I try and wipe again (holding volume down and power button) thinking maybe something didnt install correctly, and sure enought still the same problem. vibrate once followed by two consecutive vibrates (error setup wizard failed start force close)
called sprint they couldn't help me. Now my question is do anyone have the stock sprint firmware in the form of a update.zip so i can put on sdcard and flash to see if that fixes problem or do i just have a brick?

1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem

acolwill said:
1) Wrong forum
2) Download Roto JME v4 (It's on this forum)
3) Flash using Odin.
Sent from my BBC B using a V.21bis modem
Click to expand...
Click to collapse
Sorry if i posted this in the wrong spot. ANY MODS CAN YOU MOVE THIS TO CORRECT FORUM.
Even tho i did read up on Roto JME v4 it say if for GSM version. I have sprint (CDMA) version.

where can i get the drivers when you put tab in download mode?

Review #1 above, search for it. Don't get others to do your work.

rangercaptain said:
Review #1 above, search for it. Don't get others to do your work.
Click to expand...
Click to collapse
I didn't ask anyone to do anything for me, even thought i found it my self anyways thanks for those who helped.

Unbrick U8800 with Odin?

Hi there!
I have bricked my phone and it is in "download" mode.
Is there a way to "bring it back" with Odin?
Thanks!
M.

Did they repaired your phone for the second time? If not, what did they said? What did you do in the first place that you bricked it?
Sent from my Ideos X5

Still waitin'
Nobody called me, don't know what's happening with my phone.
Get back here when new info available.

No, Odin is for Samsung
Better try to flash stock rom
http://forum.xda-developers.com/showthread.php?t=1205307

darkfiremark said:
No, Odin is for Samsung
Better try to flash stock rom
http://forum.xda-developers.com/showthread.php?t=1205307
Click to expand...
Click to collapse
People still doesn't read. I said that it is bricked! Cannot install anything on.
Brgds

What do you mean by download mode? if you turn it on with vol up and down and power held, what happens?
Try put stock rom (2.3 or 2.2 depending on what was on phone before) in dload folder on sd card and it might flash firmware off that.

If you're on download mode then you can upload a recovery an boot image. Do it and use that to flash any rom you want.

I appreciate people trying to help. But sometimes it is good to stay quiet. So please, don't reply with funny suggestions.
Thanks.

Hello;
What, exactly, is "download mode"?

For someone how's in need of help, you should take it easy on the atitude and provide more info for those sparing a moment of their lives to try to help you out, no?

bonowax said:
Hello;
What, exactly, is "download mode"?
Click to expand...
Click to collapse
http://androidforums.com/vibrant-tips-tricks/177526-how-enter-download-mode-what-worked-me.html

VuDuCuRSe said:
For someone how's in need of help, you should take it easy on the atitude and provide more info for those sparing a moment of their lives to try to help you out, no?
Click to expand...
Click to collapse
I am just trying to say that sometimes it is better to no reply at all.
If i said that the telephone is bricked and only in download mode you should know what does it mean before you reply. That's all. No hard feelings.

Try using a FAT32 formatted sdcard, with nothing in it but the dload folder with a stock ROM.
Couple days ago, I deleted all files from my U8800's FAT32 and EXT4 partitons - yes, even the 'image' folder, connected to my Linux box.
Because I wanted to revert to stock Froyo, i dumped back partition 5, from a backup I did some months ago - but this part is not relevant.
Formatted the card, dumped the dload folder into it, with a card reader; removed the battery and followed the procedure described in your link.
First try, it displayed some error message - can't remember - second try it showed up the pink screen, followed by the blue screen and initiated the ROM flashing. My phone is now fine and dandy... Oh, it rebooted three times after installing stock Froyo, so don't be alarmed when you get there.
Cheers
Good luck

bonowax said:
Try using a FAT32 formatted sdcard, with nothing in it but the dload folder with a stock ROM.
Couple days ago, I deleted all files from my U8800's FAT32 and EXT4 partitons - yes, even the 'image' folder, connected to my Linux box.
Because I wanted to revert to stock Froyo, i dumped back partition 5, from a backup I did some months ago - but this part is not relevant.
Formatted the card, dumped the dload folder into it, with a card reader; removed the battery and followed the procedure described in your link.
First try, it displayed some error message - can't remember - second try it showed up the pink screen, followed by the blue screen and initiated the ROM flashing. My phone is now fine and dandy... Oh, it rebooted three times after installing stock Froyo, so don't be alarmed when you get there.
Cheers
Good luck
Click to expand...
Click to collapse
I tried all you mentioned 30 X and more then that But no success
Btw: if you dumped back your partition from backup you had access to internal memory ... i don't have that connection neither on Ubuntu or Windows. I got pink screen but it is in "Download mode" only.
Thanks.

Can you explain me how did you get your Huawei u8800 enter in Download mode if it's a feature of some samsung smartphones to work with odin ?
You're being a little rude for those who're tryin' to help you, you should be more polite ma friend...
You didn't even say what rom were you using... so I guess you don't even deserve any help from anybody.
Peace

I've had download mode on my previous Android device - LG GT540. All it needed to enter such mode was to remove the battery, SIM and sdcard , and plug the USB cable. It would enter download mode and allow a stock ROM to be flashed with the standard LG update tool.
Actually, I dumped partition 5 back to the phone prior to erasing every file system in it, and indeed had pink screen mode access in order to do it...
Sorry it didn't work out for you.

Loureiro said:
Can you explain me how did you get your Huawei u8800 enter in Download mode if it's a feature of some samsung smartphones to work with odin ?
You're being a little rude for those who're tryin' to help you, you should be more polite ma friend...
You didn't even say what rom were you using... so I guess you don't even deserve any help from anybody.
Peace
Click to expand...
Click to collapse
I've installed some custom ROM and after reboot it stopped to boot in HUAWEI logo. And that was it. I have tried to install official ROM's all of them with standard methods (dload folder) but every time ends in step 2/2 (installation failed or something like that). I opened up new thread with that few weeks ago:
http://forum.xda-developers.com/showthread.php?t=1466953
This thread was supposed to answer my question at the top. And some guys did. I don't know how can thread be closed by the author. I've try to find it but with no success.
I appreciate people like to help. But if people don't know what i am asking why answering and asking questions that are answered in many threads before.
You see .. this thread should be as small as possible but ends with looong explanations which doesn't help at all
Peace.

Moved To Q&A​
We now have a Q&A section. Please post all questions there​

Samsung Tab Help

ok so just a little background, i have rooted droid incredibles, droid x, droid x2, hp touchpad, a few iphones and ipod touches, and some other odds and ends, so i am not a super noob or anything...
but here goes I recently acquired a samsung galaxy tab I800 (wifi only)
when i received it it was stuck in a boot loop and just kept rebooting the Verzin logo over and over again
i can get it into recovery, and the downloading thing while connected to pc
so i have tried heimdall way of restoring or what not..
i know nothing about this SGT, pretty sure its not rooted, but i wouldnt know, and i have no idea what happend to get it into the boot loop,
i have read MANY posts and did alot of searching over the last week and a half before i decided to post..but i must be missing something,
and i really need some assistance...
so if someone can help guide me through this i would be greatly appreciated
Thanks

a bit misleading
SCH-I800 is not wifi only. It is a CDMA device.
P1010 is wifi only.
Look for post on CDMA (sprint/verizon the same).
I can't help much since I don't know about CDMA device.
Good luck.

thanks for the info that i was getting mixed up...its is defiantely a sch I800 which is what it says on the back.and likei said i dont know alot about this tab, just what i was told, which was that it was wifi only..but that was definately wrong info according to what i am told now.
either way i am still stuck on the verizon screen. i also tried the heimdall again see maybe if it would take this time, but still no luck, i feel like i am using the right firmware but i am going to start from scratch now and see if i can get it going..too much misinformation in my head..lol
but if anyone can shoot me in the right direction i will be checking back here alot to see whats up..
thanks again
and thanks to priyana hopefully i can get this thing working..
here is a link to my most recent try
http://forum.xda-developers.com/showthread.php?t=967175&page=13
its in the post by justin buser post #130

There are several things that make ur device stuck on verizon bootloop.
It can be bad partition system(the wrong pit)-happens when ppl try incorrectly upgrading from froyo to gb/ics, or gb to ics, vice versa.
It can also be incomplete rom - flash interruptions, missing system folders etc.
Go to recovery and check if you get error msgs when you do factory reset wipe and data cache wipe.
Your best bet is to flash a cdma rom with repartition option and tlinclude the correct pit file. You can do it via heimdell or odin.

yappoe said:
There are several things that make ur device stuck on verizon bootloop.
It can be bad partition system(the wrong pit)-happens when ppl try incorrectly upgrading from froyo to gb/ics, or gb to ics, vice versa.
It can also be incomplete rom - flash interruptions, missing system folders etc.
Go to recovery and check if you get error msgs when you do factory reset wipe and data cache wipe.
Your best bet is to flash a cdma rom with repartition option and tlinclude the correct pit file. You can do it via heimdell or odin.
Click to expand...
Click to collapse
yes i do get error messages when i try to do a factory restore and data cache wipe i could post a screenshot if that would help, i know it says something like cant mount some files located on E:
one example is
E: install_application_for_customer:cant mount data
then some more files that are unable to mount
and sorry to sound dumb but could you point me to cdma roms? and not sure what you mean about the repartition option..also where or how can i obtain the correct pit file? and as i said in first post not sure what android OS is on this thing nor do i know if it was rooted, and i have no idea how it got into this state
thanks for the help as well..i been a member on this site for a bit, but always just read and get it done, this is the first issue that i have had to post about that i am completely lost on, so your help is greatly appreciated

Can you me more details about your device like model no etc..
Here's the link to stock firmware , check if your model is listed here
http://www.samfirmware.com/
Are able to go into download mode
Volume down+power button

ronak.super said:
Can you me more details about your device like model no etc..
Here's the link to stock firmware , check if your model is listed here
i cant post links yet lol but its the samfiemware website that was here
Are able to go into download mode
Volume down+power button
Click to expand...
Click to collapse
only stuff i know about the device is what is on the back
which is galaxy tab sch-I800
i know its a 7 inch tab and is thru verizon.
do you want the sku number and stuff as well?
everything else i found out about it is in my previous posts
and yes i can go into download mode and recovery
when i try to do a factory wipe/ cache delete option it says in yellow text "your storage not prepard yet, please use UI menu for format and reboot actions" if that means anything
and a bunch of red text stating stuff about not being able to mount or open certain files on E:
i checked that site with the firmwares, but i dont see any that even say anything about I800
my galaxy tab is

Use this pit file when you flash later.
http://forum.xda-developers.com/showthread.php?p=28759501
I'll get back to you on firmware/ROM.

yappoe said:
Use this pit file when you flash later.
http://forum.xda-developers.com/showthread.php?p=28759501
I'll get back to you on firmware/ROM.
Click to expand...
Click to collapse
are you refering to the pit file that i posted ? lol

http://www.jamesriter.com/blog/tag/how-to-restore-verizon-galaxy-tab-back-to-stock/
This is the solution to your problem hope it helps
Hit thanks!!

ronak.super said:
http://www.jamesriter.com/blog/tag/how-to-restore-verizon-galaxy-tab-back-to-stock/
This is the solution to your problem hope it helps
Hit thanks!!
Click to expand...
Click to collapse
I did try that route before and it seems like it goes ok, but then when it finishes and i have to reboot (because of the verizon bootloop) and i got to wipe data and cache it has all the red text saying stuff about no being able to mount E: drive files/folders..
i will give it another try just for the sake of trying again
thanks

Hahaha.. didnt realize that. Then just use that pit file to repartition with the choice of rom.
Sent from my GT-P1000 using xda premium

Download latest heimdall you get an option for reparition check it , It'll wipe your memory!
And hit the thanks button below

I am on the same boat. My tab is ok except the kernel. I want to flash it to cm9 but heimdall is not seeing my tab.
Sent from my DROID RAZR using xda premium