HALLO ALL,
i install hspl2 on t mobile htc hd 2 then i try to flash my phone with 1.66.405 rom.after that my mobile is not booting did i brick my phone or it can be recoverd........sorry for my poor english..help me friends
Is it a t-mo USA device? If so.. yes it's bricked.
When you say it wont boot do you mean you can power it on but it wont get past the splash screen? Or it just streight up wont power on?
Same as he said.. Does it power on? Power = good. Somtimes units will only power on when plugged into usb / charger. If this is the case, when it boots up go into boot rom by pressing vol down and reset in the back. When the tri color screen loads and says USB. Flash to a official rom such as the tmobile one.
man if you instaled 1.66 he is bricked i did the same with mine a big f mistake , but i fix it with cost , but is very hard to find service that will fix it , it just need a resurection ... if you still have the phone contact me. maybe i can help
Hey, the same happened for me..
When I put in my battery, it turns on automatically, shows the HTC screen, but never boots. Anyways, before it turns on automatically, I managed to do a light and a hard reset too, non of them is working.
Please, if somebody knows the way to fix it, contact me here or on my mail, [email protected]
I'll be waiting for you messages!
rvida said:
Hey, the same happened for me..
When I put in my battery, it turns on automatically, shows the HTC screen, but never boots. Anyways, before it turns on automatically, I managed to do a light and a hard reset too, non of them is working.
Please, if somebody knows the way to fix it, contact me here or on my mail, [email protected]
I'll be waiting for you messages!
Click to expand...
Click to collapse
Yours is totally different problem, and you should try flashing stock rom from sd.
Could you help me with that?
'Cause I don't even know where to start basically...
rvida said:
Could you help me with that?
'Cause I don't even know where to start basically...
Click to expand...
Click to collapse
Take a image from the original ROM Say Vodafone, T-Mobile (your operator)
Extract the file, for me it is : "RUU_Leo_Vodafone_NL_1.72.172.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship"
Use Winrar to extract this file : RUU_signed.nbh maybe called different but look for the biggest file extracted.
I hope you have a MicroSD
Rename
RUU_signed.nbh to leoimg.nbh put it on the MicroSD card
Put the MicroSD in the Phone,
Press down the Volume (left side) like you want less sound out of your phone
Press same time the Power On button hold it down until you see a bootloader
Now your ready to reflash original rom from the MicroSD
use HSPL 2.08 to load the not branded roms to the divice
Hope it works,
When you have Power in the phone then it wil work for sure
Ariebombarie
PLEASE HELP
TWO DAYS AGO I RESTORE MY BACK UP ROM 2.3.3
CM7-J005 VIA XRECOVERY
BUT NOW I CANT ENTERING TO X-RECOVERY, EVEN I HAMMER BACK BUTTON AND TRY FOR SEVERAL TIMES
AS I REMEMBER I DONT UPDATE MY BUSYBOX
I NEED TO CHANGE MY ROM,... PLASE HELP
SORRY FOR MY BAD ENGLISH
THANKS
If you really need to change the ROM just run SEUS and root again.
SEUS? What for? If the ROM is booting and working then all that must be done is to reinstall xRecovery manually and try to get into it again
if you install b box installer and xrec you will get it back as i had the same problem hope that help
thanks for the advise, now i found how to go to x recovery by push power button twice when se logo came out .....
cause i usually use back button
thanks guys
Hello all good people. My screen suddenly stoped working.. hardware buttons works fine but thats not enough on this phone.
I still have guaranty fortunately But with hardspl, CWM and a android nandrom installed i dont dear to send it in.. is there a way to remove everything? I mean so it will pass the most strickted serviceguy..
Hope anybody can help me and yes.. i've searched a lot for this solution with no luck :/
J.R.E said:
Hello all good people. My screen suddenly stoped working.. hardware buttons works fine but thats not enough on this phone.
I still have guaranty fortunately But with hardspl, CWM and a android nandrom installed i dont dear to send it in.. is there a way to remove everything? I mean so it will pass the most strickted serviceguy..
Hope anybody can help me and yes.. i've searched a lot for this solution with no luck :/
Click to expand...
Click to collapse
Download the stock Windows Mobile ROM for your particular device (TMOUS, Telestra, etc.) and rename the ruu_signed.nbh to LEO_IMG.nbh and put it on an sd card of 4gb or less. Put the sd card in your HD2 and power it on while holding the volume down (vol -) button the entire time it's starting until you enter into bootloader (tri-color screen). The leo_img.nbh should be detected shortly and then you will be prompted to press a certain button to flash the new ROM. Once it's done, you will have stock WM 6.5 and the stock bootloader back on your phone, ready to ship off for repairs.
Just make sure and find the correct stock ROM for your device, or you will be sorry. If you flash a EU ROM to a TMOUS HD2 for example, it will brick the device. Look in the HD2 Windows Mobile 6.5 stickies and you will surely find a link to stock ROMs to download.
Thank you Mr. huggs u made my night
No problem, glad I could help
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
So if somebody can help me i would be very pleased
Ps. And sorry my bad english, i just a finnish.
Edit: I try reinstall, i post is changes comes.
E: No changes, still not working.
EDIT!!!!
SO if someone can help me, place do it
E.
And this just happend, phone just stop working whit black screen.was have to took battery off, and then it took about 10-30min to boot to win again.
THIS IS PRIMARY PROPLEM.
AAAAND now it wont even start. stuck in "smart mobility"...
Please read post's for more information.
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Could I solve this proplem if i unlock and install custom rom? just wondering if that would help?!
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
chan.sk said:
Hi,
"Smart Mobility" screen
I had that problem too, and did a hard-reset.
Hold Volume Up + Volume Down buttons (hold hard) and press Power switch until you see the warning sign to confirm a hard reset.
The system will do a re-flash of the original Windows Mobile ROM.
Start Android by running HaRET from Windows Mobile
Yes, you have to run HaRET.
You can make it simpler by making a short-cut in Windows Mobile Start Menu.
Tap and hold on HaRET until you see the Dialog Box to Cut, Copy, etc.
Tap Copy.
Go to Device-Windows-StartMenu, paste as a shortcut
These steps are in the Touch HD Manual. If you do not have one, download it from the HTC website.
Click to expand...
Click to collapse
I have tried hard reset, but that didn't work, and tried to put original rom too, and nothing happened. I have 2 original roms
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
but those didint work. i will try today againe. and then if it going to work i will put that haret to start menu.
I'll try that 1.14 first...
flashed that 1.4 rom and waited about an hour and nothing happend... i jsut did hard reset and wait againe if it gonna boot now...
i was thinking that should i put custom rom, coz if something went wrong whit the official?
I mean if there is something wrong in phones hard drive? like something wrong whit registery or something?
something that wont let win start. if there is, how i can fix that?
masentava said:
Hello!
I am new here as you can see. this is not primary proplem anymore.
I installed XDAndroid GBX0C 2.3.7Build to my HTC balckstone and everything works well, but camera tells me "camera error; Cannot connect to camera."
is there any fix for that?`
and the other thing, when i boot phone it goes to win6.1 and i have to go settings etc. and boot it from haret.exe.
so am i done something wrong or something? Solved
Click to expand...
Click to collapse
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
chan.sk said:
GBX0C2.3.7 Build is on SD card.
You will need to boot from Windows Mobile first, then run HaRET to reboot to XDAndroid.
If XDAndroid hangs, you need to remove battery, put back battery and power on. Then you see Windows Mobile and do above step again.
Always, from XDAndroid to go back to Windows, you need to Power Off, and then Power On again.
Click to expand...
Click to collapse
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
masentava said:
I undestood that... but thats not the proplem anymore coz windows wont start, its stuck in "smart mobility"
i tryed to flash original rom's bot that didint work....
so prolem is how do i get windows back to work?
now i have tried flashing original rom from CPU and Storege card... both install it correctly and says everyting is ok, but still its stuck at "smart mobility" screen.
it wont even shot in the right corner that red text of versions etc.
so what's the solution to this proplem? i would be very pleased if some one could tell me how to fix my proplem. i know there is someone who know what i should do.
Click to expand...
Click to collapse
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
(800) stedntf
chan.sk said:
You say you are flashing the original ROM. You mean the original HTC Windows Mobile 6.1 ROM? I understand you can only get this done only from HTC authorized centers.
Click to expand...
Click to collapse
I have
This
RUU_BlackStone_HTC_FIN_1.14.414.2_Radio_52.49a.25.26_1.09.25.14_Ship
And this.
RUU_BlackStone_HTC_FIN_1.56.414.0_Radio_52.62.25.34_1.13.25.24_Ship
Blackstone/HD Links | Guides | Stickies | Roms | Read before posting
http://forum.xda-developers.com/showthread.php?t=999925
U have to install HTC USB Sync Drivers drivers
Put the phone into bootloader by pressing volume down + power button
plug the usb cable to the computer/laptop
and then run the shipped rom executable file... when the tricolor screen displays USB at the bottom.
else extract the RUU_signed.nbh or any file with .nbh extension from the shipped file with zip viewers like 7-zip
rename the file to BLACIMG.nbh
Put into the root of memory card
put the phone into bootloader and follow the screen instructions..
And the most important thing... search the forum.. before posting..
Hope this works for you
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Hi all,
You can try a NAND ROM like the new release of Fagyi. There is an easy step by step manual to installation. You will lose winmo, but you will have a real android.
It looks pretty and he has solved many of the issues of previous versions.
Regards
CristianCRS said:
Hi there! I think that you can't reflash even a Original ROM without unlock the phone with new Hard-SPL from Olinex ,considering that you have tried a Hard Reset and nothing happened ,your last option is to unlock the phone and reflash the ship ROM ,or to flash a custom ROM ( is not a good solution if you still have warranty,but still you cand revert your stock SPL:good so ,you have nothing else to lose , all is left for you is to try what i said before . If you don't know how to do it,let me know and i will post the exact links to instructions.
Click to expand...
Click to collapse
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Do a Search and read the posts
masentava said:
well, maybe i will try to unlock, i looked some instruction, aaand didint understood
So if there is quide to dummiest dummies, so i think that would help me!
But thx to all answers!
Click to expand...
Click to collapse
You need to understand what you are going to do or you may end up with a phone that does not work anymore.
Do a search of the forum and read the posts. There are so many.
http://forum.xda-developers.com/sitesearch.php?q=unlock blackstone
hi guys i have unziped the rom i want on to the memory card in my phone now all i need is some instructions to install the rom from here.
i hold down vol down menu and power buttons and all it does is re install the current rom.
i must be missing something can some one help?
thanks in advance.
regards,
yartzy
yartzy said:
hi guys i have unziped the rom i want on to the memory card in my phone now all i need is some instructions to install the rom from here.
i hold down vol down menu and power buttons and all it does is re install the current rom.
i must be missing something can some one help?
thanks in advance.
regards,
yartzy
Click to expand...
Click to collapse
First thing you need to root your phone (THIS WILL VOID YOUR WARRENTY AND I'M NOT RESPONSIBLE) : http://d-h.st/9QW (dont forger to activage USB Debug in your phone and rageagainst the cage in SuperOneClick 1.7)
Then install ClockWorkMod : http://theunlockr.com/2012/12/31/how-to-install-clockworkmod-recovery-on-the-lg-optimus-l3-e400/
Good Luck Bro
yartzy said:
hi guys i have unziped the rom i want on to the memory card in my phone now all i need is some instructions to install the rom from here.
i hold down vol down menu and power buttons and all it does is re install the current rom.
i must be missing something can some one help?
thanks in advance.
regards,
yartzy
Click to expand...
Click to collapse
follow step by step
1. u need ROOT ur phone first, u can try supper one click (easy way) and copy rom in zip type (do NOT unzip it) just put it in card.
2. install "rom manager"
3. right after intall rom manager open it and chose first option -> chose lg l3 then chose flash phone (need internet connection) and w8 it complete, it will ask supper user for permision, chose alow.
4. if u doing correct then chose 2nd option (reboot into recover). the way u doing is manual going into recover mode but u didnt flash successful that why u cant go farther.
5. clear some thing then install rom ( sorry i cant remember right now... just seach google >"<)