[Q] Phone won't boot after failed restore - myTouch 4G Q&A, Help & Troubleshooting

Greetings
My phone is failing to boot after a failed restore. The phone is rooted and has S-OFF. After flashing a custom ROM I wiped and tried to restore a backup of the stock rooted ROM. That failed while writing the partition cache with an error like this: E:Can't mount /sdcard. During the restore I connected the USB cable right before that error appeared and I suspect that was the cause. I rebooted the phone from recovery, the boot screen came up, sat there for a while and then it entered a boot loop. I pulled the battery at that point. Afterward the phone wouldn't boot into fastboot or recovery. The LED doesn't come on when I plug in USB but the PC detects QHSUSB_DLOAD as new hardware. Is there anything I can try to fix this?
Thanks,
Boz

So you can't boot into the bootloader or recovery at all?
Sent from my HTC Glacier using XDA App

Nope, I can't boot into the bootloader or into recovery. The phone is pretty much unresponsive except for the QHSUSB_DLOAD device detected by the PC.

Wow. Sounds toasted to me. Sorry. Just play around with it using different ways of powering it up.....like without the SD card, hold the buttons then put it the battery, and other ways like that. If it still won't do anything, it seems like your bricked.
Sent from my HTC Glacier using XDA App

Yeah, that's kinda what I figured. I'll play with it some more but I ain't holding my breath. Can tmobile/htc fix this? If so, how much would it cost? I've had the phone for about 10 months but I don't have warranty on it.

You could take it to a T-Mobile store and ask them. They might give you a replacement if your lucky....or maybe a discount for a new phone. Don't mention that it was rooted or that you tried to fix it though. Just tell them it stopped working.
Sent from my HTC Glacier using XDA App

That's what I'll be trying after work today. Hopefully they won't give me too much crap.

Read my "if you think you're bricked" guide...
Its a sticky in the general section.
Sent from my HTC Glacier Sense 3.5 using xda premium

ask and answer these two questions to yourself:
1) can you enter bootloader?
2) can you enter recovery?
Note: if you can't enter either one of those, and your device doesn't show any signs of life, then don't bother reading on, you are truly bricked.
Click to expand...
Click to collapse
I started reading your guide but unfortunately for me the answer to both of those questions is "no"

EvilBoz said:
I started reading your guide but unfortunately for me the answer to both of those questions is "no"
Click to expand...
Click to collapse
Ah I see... sorry about your luck friend...
Sent from my Streak7 Honeycomb using xda premium

Related

[Q] Not rooted bootloop?

Ok so this is on my wife's phone that I have not touched, I have a vibrant that is rooted and I flash different things all the time, and recovered from several bootloops, so I'm not totally new to this. As soon as you turn the phone on it goes to the my touch 4g screen, vibrates, and then reboots. I can get into hboot screen but if I try to go to recovery or do a factory reset it just bootloops again. I did some searching but saw nothing about an unrooted phone bootlooping. Any help is greatly apreciated.
Try this... pull the battery. Let it sit for 20 minutes. Then try booting it. Sounds like a dell tech support answer... but it has actually worked for more than a few people.
Sent from my HTC Glacier using XDA App
Ok so I found PD15img.zip and tried loading it and installed fine but same problem, so I'm not trying to install factory recovery through adb and fastboot and I've got all the files but fastboot will not recognize the device (yes drivers are installed). Any suggestions before I call HTC/tmobile in the morning?
bfranklin1986 said:
Ok so I found PD15img.zip and tried loading it and installed fine but same problem, so I'm not trying to install factory recovery through adb and fastboot and I've got all the files but fastboot will not recognize the device (yes drivers are installed). Any suggestions before I call HTC/tmobile in the morning?
Click to expand...
Click to collapse
Well, you could try the suggestion from the poster above..and if you did leave feedback.
Sent from my HTC Glacier using XDA Premium App
If the pd15img.zip isn't working sounds like an internal storage issue. If that's the case there is nothing u can do. Call T-Mobile not HTC.
Sent from my HTC Glacier using XDA Premium App
Thanks for everyone's help. Left the battery out all night and same thing this morning. Called t-mobile and they're shipping a new one for free, which surprised me since we bought the phone off eBay. Thanks again.
Sent from my SGH-T959 using XDA App

Can't open /cache/recovery/log errors. need help!!

Need tons of help! I've been searching the forums for almost 24 hours now trying everything and still can't get it fixed. I rooted and got s-off on my wife's MyTouch 4g. I installed ROM Manager and flashed the latest CWMR 5.0.2.0. I did a full Nandroid backup. Then I tried flashing a Gingerbread ROM over the Froyo rom. It went to white MyTouch screen and never left it. I finally gave up and went back to recovery. When I try to restore using Nandroid, I get this:
Error while formatting /system!
E:Can't open /cache/recovery/log
E:Can't open /cache/recover/last_log
I can get into HBOOT, Fastboot and Recovery just fine.
I tried the RUU exe floating around and it always fails trying to reboot bootloader.
I tried letting it autoupdate the stock PD15IMG.zip floating around it always fails.
I've tried flashing different recoveries including older CWMRs and always get error about remote not enabled.
I'm at my wit's end. I'm leaving town tomorrow and need to at least get back to the nandroid backup before I leave. Any advice?
Wrong section dude ! Read the forum rules .
Sent from my HTC Glacier using xda premium
Your bricked. You suffer from a bad chip. Your only Hope is flashing the pcblahblah.zip thru fastboot and Hope it works.
Undeadk9 said:
Your bricked. You suffer from a bad chip. Your only Hope is flashing the pcblahblah.zip thru fastboot and Hope it works.
Click to expand...
Click to collapse
I put PD15IMG.zip on the sdcard. HBOOT checks the file and prompts me to update. When I choose yes, each option shows Fail-PU.
Is there something I'm missing here? Any help is appreciated. Sorry if it's in the wrong section. Can someone move the thread? Thank you.
[QUOTEI =chapaj;18334465]I put PD15IMG.zip on the sdcard. HBOOT checks the file and prompts me to update. When I choose yes, each option shows Fail-PU.
Is there something I'm missing here? Any help is appreciated. Sorry if it's in the wrong section. Can someone move the thread? Thank you.[/QUOTE]
I had the same problem, bad chip, just keep the ROM you are currently running, if you try to flash some thing you will have a semi brick.I couldn't never solve that problem.
Sent from my HTC Glacier using xda premium
chapaj said:
I put PD15IMG.zip on the sdcard. HBOOT checks the file and prompts me to update. When I choose yes, each option shows Fail-PU.
Is there something I'm missing here? Any help is appreciated. Sorry if it's in the wrong section. Can someone move the thread? Thank you.
Click to expand...
Click to collapse
Fail-pu means dead chip. Sorry but your device is done.
Sent from my HTC Glacier using xda premium
coupetastic-droid said:
Fail-pu means dead chip. Sorry but your device is done.
Sent from my HTC Glacier using xda premium
Click to expand...
Click to collapse
not necessarily.. i recovered one of my MT4G's thats had this issue... Engineering bootloader is what saved my ass...OP, Did you flash the Eng bootloader when rooting your device??
That's the problem. I wasn't able to successfully flash a ROM so it's useless.
Sent from my PG86100 using XDA App
I rooted using a 1-click method I found here. I don't have the link in front of me. How can I check which one I have?
Sent from my PG86100 using XDA App
=/ I believe you should've flashed engineering bootloader before wiping your current ROM. Is your phone under warranty?

Help Me please!!! Atrix wont boot!!!!!

So here is what happened. I made a backup of a stock atrix firmware and copied the backup to my atrix on deodexed 2.3.4. I tried to install the backup but it stops somewhere along the line and says error formatting data.
now the phone wont connect to the computer. when i opened rsdlite however it shows that the device is connected.the phone bootloops and I cant copy anything to the phone cause i cant connect to the phone except through rsd sorry if i posted in the wrong section cause this is the only one i can post in. and i searched for solutions but no one has this same problem. PLEASE HELP
then if you CAN use rsd lite place phone in rds lite mode then use "stock sdk from motorola and flash it back i went all the way ro 1.26 then over rhe air updated to 1.83
but i also continued on to unlocked bootloader and flashed gigerbread build (alien ) after installing cwm
im also on usa at&t fyi
ltdanno360 said:
then if you CAN use rsd lite place phone in rds lite mode then use "stock sdk from motorola and flash it back i went all the way ro 1.26 then over rhe air updated to 1.83
but i also continued on to unlocked bootloader and flashed gigerbread build (alien ) after installing cwm
im also on usa at&t fyi
Click to expand...
Click to collapse
I tried to flash the official 2.3.4 found here http://forum.xda-developers.com/showthread.php?t=1181932 but now i just have a locked bl. and it still bootloops. Can you give me little more detailed instructions on what you did. I'm not too experienced.
Morpheaous said:
I tried to flash the official 2.3.4 found here http://forum.xda-developers.com/showthread.php?t=1181932 but now i just have a locked bl. and it still bootloops. Can you give me little more detailed instructions on what you did. I'm not too experienced.
Click to expand...
Click to collapse
Did u do factory reset after the flash
Sent from my MB860 using xda premium
My atrix wont even boot to the RSD etc selection screen
So i had my phone rooted and wanted to unlock the bootloader so i followed the steps from pudding but it did not work. everyone has a NS version of the phone in RSD Lite but mine was SE not sure why. So i tried a few times to flash the new image and clear everything out to no avail. now i don't even get to the menu that gives me 5 seconds to select what method i want to use to fix it.
all i get is a flash of this on the screen before it goes black again
SVF:105:1:2
Failed to boot 0x1000
(stays for a second)
Entering NWFlash Recovery Mode
(Flashes under the other text but really fast before the screen goes blank)
windows wont even recognize that its plugged in. but what else is odd is that while plugged in it seems to be charging as the green notification light stays on.
any help would be great. thank you
voidlogik said:
Failed to boot 0x1000
Click to expand...
Click to collapse
isnt that a hard brick? it's over.
sanriver12 said:
isnt that a hard brick? it's over.
Click to expand...
Click to collapse
really?? no way to unbrick it?
Morpheaous said:
I tried to flash the official 2.3.4 found here http://forum.xda-developers.com/showthread.php?t=1181932 but now i just have a locked bl. and it still bootloops. Can you give me little more detailed instructions on what you did. I'm not too experienced.
Click to expand...
Click to collapse
Bootloops means soft bricks which is not really a problem. When your phone Boots up, press the down key along worth the power button. Then keep pressing down button until you see Android Recovery. Do a factory reset or flash another room once in there.
Sent from my MB860 using XDA App
voidlogik said:
really?? no way to unbrick it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1165154
voidlogik said:
really?? no way to unbrick it?
Click to expand...
Click to collapse
Sounds like a hard brick indeed. At this moment in time hard bricks are incurable but some people said that taking their battery out and putting it back into their phones solved their problem. You might want to give it a shot.
A guy also claimed thay its possible to unhardbrick your phone using the jtag technique. You might want to read up on it.
Sent from my MB860 using XDA App
aIf it says failed to boot x1 its real bad but i got a failed to boot x2 and got it fixed but x1 tragic
Sent from my MB860 using xda premium
ltdanno360 said:
aIf it says failed to boot x1 its real bad but i got a failed to boot x2 and got it fixed but x1 tragic
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
English plz.
Sent from my MB860 using Tapatalk
me too
There's soo many forums and different avenues to go down! after about 9 hours trying various things to make my atrix (running normal 2.3.4 rooted with no other cm7 or rom or any other mod) i am left with my atrix at the boot screen OR if i leave it to boot it just makes the logging on noises then shows the white screen, then nothing.
I stupidly followed the list to freeze using bloatfreezer. Not the updated list where it reads next to HOME (make sure you have another launcher) so i have frozen 'home' and i am stuck.
i cannot do a recovery because it has that fail message x2 everytime i do the power volume - and + on the android recov.
I am completely lost. i do not understand what hard/soft/adw/ push email/ or other jargon means. If you have any solutions i'd be more than grateful.
I hope i haven't bricked my phone, cos a 2year contract and no new phone is gonna push me near that ledge lol
atrixuk said:
There's soo many forums and different avenues to go down! after about 9 hours trying various things to make my atrix (running normal 2.3.4 rooted with no other cm7 or rom or any other mod) i am left with my atrix at the boot screen OR if i leave it to boot it just makes the logging on noises then shows the white screen, then nothing.
I stupidly followed the list to freeze using bloatfreezer. Not the updated list where it reads next to HOME (make sure you have another launcher) so i have frozen 'home' and i am stuck.
i cannot do a recovery because it has that fail message x2 everytime i do the power volume - and + on the android recov.
I am completely lost. i do not understand what hard/soft/adw/ push email/ or other jargon means. If you have any solutions i'd be more than grateful.
I hope i haven't bricked my phone, cos a 2year contract and no new phone is gonna push me near that ledge lol
Click to expand...
Click to collapse
I'd recommend starting a new thread w/ your issue. It's more likely to be seen and answered by someone who could help.
atrixuk said:
There's soo many forums and different avenues to go down! after about 9 hours trying various things to make my atrix (running normal 2.3.4 rooted with no other cm7 or rom or any other mod) i am left with my atrix at the boot screen OR if i leave it to boot it just makes the logging on noises then shows the white screen, then nothing.
I stupidly followed the list to freeze using bloatfreezer. Not the updated list where it reads next to HOME (make sure you have another launcher) so i have frozen 'home' and i am stuck.
i cannot do a recovery because it has that fail message x2 everytime i do the power volume - and + on the android recov.
I am completely lost. i do not understand what hard/soft/adw/ push email/ or other jargon means. If you have any solutions i'd be more than grateful.
I hope i haven't bricked my phone, cos a 2year contract and no new phone is gonna push me near that ledge lol
Click to expand...
Click to collapse
If you're on AT&T - get RSD lite and find the proper sbf file and flash it. If you were using Gingerbread, make SURE you have a GINGERBREAD sbf file - or else you'll permanently brick your phone. If you're on Bell - you'll need the appropriate file for Bell to flash, same rules apply - If your on gingerbread, make SURE its a gingerbread file you're flashing.
atrixuk said:
There's soo many forums and different avenues to go down! after about 9 hours trying various things to make my atrix (running normal 2.3.4 rooted with no other cm7 or rom or any other mod) i am left with my atrix at the boot screen OR if i leave it to boot it just makes the logging on noises then shows the white screen, then nothing.
I stupidly followed the list to freeze using bloatfreezer. Not the updated list where it reads next to HOME (make sure you have another launcher) so i have frozen 'home' and i am stuck.
i cannot do a recovery because it has that fail message x2 everytime i do the power volume - and + on the android recov.
I am completely lost. i do not understand what hard/soft/adw/ push email/ or other jargon means. If you have any solutions i'd be more than grateful.
I hope i haven't bricked my phone, cos a 2year contract and no new phone is gonna push me near that ledge lol
Click to expand...
Click to collapse
you need to have an unlocked bootloader to flash Any custom rom PM me ill show ya how its not too hard
a pc a atrix and a few files and you will
be up n running in no time at all
Sent from my MB860 using Tapatalk

HELP! I think I bricked my nexus 7. [SOLVED]

After i tryed flashing kaos droid i think ive managed to brick my nexus 7. It just boots into cwm v6.0.1.0. Ive tryed a number of times holding down the power and the volume buttons together and i CANT get into the bootloader ): . No matter what i do it just boots into the recovery even if i flash another rom it goes back to cwm. I dont know what to do please help? I cant even shut the screen off its been in cwm for over 3 hours now \:
And i was rooted and unlocked before this. Tab was working fine till i flashed kaos droid
Sent from my myTouch 4G Slide using Tapatalk 2
Just use recovery to restore your backup.
Sent from my Nexus 7 using xda premium
This is about the 15th post I've seen this week about someone screwing up their n7. If there already isn't one there needs to be a step by step video for the correct way to unlock, root, and flash Roms. I suggest others read heavily before doing any flashing. Its bad enough the boot loader is already screwy.
The toolkit does everything for you. All in one method and you're done.
I'm sure its his .img
Sent from my Nexus 7 using xda premium
I had this problem happen with my Xoom.
Boot into the bootloader from recovery. There should be an option to do so.
In the bootloader flash a different recovery.
Then reinstall your ROM. It should boot.
If that doesn't work I would suggest flashing the stock images in fastboot and starting over.
Sent from my Nexus 7 using xda premium
El Daddy said:
I had this problem happen with my Xoom.
Boot into the bootloader from recovery. There should be an option to do so.
In the bootloader flash a different recovery.
Then reinstall your ROM. It should boot.
If that doesn't work I would suggest flashing the stock images in fastboot and starting over.
I will try using the toolbox but i dont think i have access to fastboot from the recovery? I mean im telling you guys my screen has been on for over 4 hours because it just reboots and wont turn off.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
I can not boot into the bootloader my nexus 7 boots directly into cwm. I tryed wiping caches, wiping system, formating everything, restoring a nandroid, flashing another rom..... Nothing is working
When i get home. To my computeer im going to try using the toolkit hopefully it works
Sent from my myTouch 4G Slide using Tapatalk 2
nemesis93 said:
I can not boot into the bootloader my nexus 7 boots directly into cwm. I tryed wiping caches, wiping system, formating everything, restoring a nandroid, flashing another rom..... Nothing is working
Sent from my myTouch 4G Slide using Tapatalk 2
Click to expand...
Click to collapse
I had a similar problem on my og evo. Try seeing if you can flash the recovery from a computer while booted into cwm. Then it'll reboot into new recovery, you flash rom, and you stop sharding your pants
nemesis93 said:
I can not boot into the bootloader my nexus 7 boots directly into cwm. I tryed wiping caches, wiping system, formating everything, restoring a nandroid, flashing another rom..... Nothing is working
Sent from my myTouch 4G Slide using Tapatalk 2
Click to expand...
Click to collapse
Even choosing "reboot bootloader" in recovery?
If that doesn't work, connect to you your computer and using adb type the command
Code:
adb reboot bootloader
kieso said:
This is about the 15th post I've seen this week about someone screwing up their n7. If there already isn't one there needs to be a step by step video for the correct way to unlock, root, and flash Roms. I suggest others read heavily before doing any flashing. Its bad enough the boot loader is already screwy.
Click to expand...
Click to collapse
And to you sir I have read and watched other videos/tutorials whatever you may call them. I post on here as a last resort when "i dont know what to do". I cant understand people who post but dont really have nothing helpful to say about the topic. All im asking for is some help please and thank you
Sent from my myTouch 4G Slide using Tapatalk 2
El Daddy said:
Even choosing "reboot bootloader" in recovery?
If that doesn't work, connect to you your computer and using adb type the command
Code:
adb reboot bootloader
Click to expand...
Click to collapse
I dont have a reboot bootloader option but when i go to reboot system it goes straight into cwm like i said.
Also fastboot/adb is not working. When i run a command it says "waiting for device" on my computer
Sent from my myTouch 4G Slide using Tapatalk 2
On a side note, i had tryed everything i formated the sd in cwm and now it appears on cwm as if theres "No files found" but on my computer everything i had previously is still there.
So there is a connection to the storage part of the device but not adb or fastboot
Sent from my myTouch 4G Slide using Tapatalk 2
nemesis93 said:
I dont have a reboot bootloader option but when i go to reboot system it goes straight into cwm like i said.
Also fastboot/adb is not working. When i run a command it says "waiting for device" on my computer
Sent from my myTouch 4G Slide using Tapatalk 2
Click to expand...
Click to collapse
Hmmm. You should have a working adb while booted into a custom recovery. Are your drivers installed correctly?
Also, the reason why you computer sees the files is because with mtp it caches the files.
Sent from my Nexus 7 using xda premium
El Daddy said:
Even choosing "reboot bootloader" in recovery?
If that doesn't work, connect to you your computer and using adb type the command
Code:
adb reboot bootloader
Click to expand...
Click to collapse
So far i got adb to work finally! Happy im making some progress.
Now im able to boot into the bootloader so i can run fastboot commands. I currently have NO rom whatsoever installed so im waiting to flash the stock rom using the toolkit. Thank you for your help
Also when i booted into twrp it said i had 3% battery left lol so im just hoping it will work now.
Sent from my myTouch 4G Slide using Tapatalk 2
OP will stop making threads like this if people stop recommending toolkits......................
And definition of brick is beyond repair - unable to boot up, e.g. Black screen when power button is pressed, not even the Google screen.
Will the next nexus have a longer screen?
Mach3.2 said:
OP will stop making threads like this if people stop recommending toolkits......................
And definition of brick is beyond repair - unable to boot up, e.g. Black screen when power button is pressed, not even the Google screen.
Will the next nexus have a longer screen?
Click to expand...
Click to collapse
Well it was beyond repair for the moment being if i did NOT have access to adb, fastboot, nor the Bootloader i said that three times already.
But whatever i finally got adb to work and was able to fastboot flash a stock image. Thank you so much el daddy for your help i really appreciate it.
Sent from my myTouch 4G Slide using Tapatalk 2
nemesis93 said:
Well it was beyond repair for the moment being if i did NOT have access to adb, fastboot, nor the Bootloader i said that three times already.
But whatever i finally got adb to work and was able to fastboot flash a stock image. Thank you so much el daddy for your help i really appreciate it.
Sent from my myTouch 4G Slide using Tapatalk 2
Click to expand...
Click to collapse
No problem. I'm glad you got it to work.
And thank you for flashing with fastboot and not a toolkit
Sent from my Nexus 7 using xda premium
El Daddy said:
No problem. I'm glad you got it to work.
And thank you for flashing with fastboot and not a toolkit
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Yeah i tryed at first because i was lazy and it didnt work so i did it through fastboot.
Thanks again
Sent from my myTouch 4G Slide using Tapatalk 2
Glad you got it working
nemesis93 said:
And to you sir I have read and watched other videos/tutorials whatever you may call them. I post on here as a last resort when "i dont know what to do". I cant understand people who post but dont really have nothing helpful to say about the topic. All im asking for is some help please and thank you
Sent from my myTouch 4G Slide using Tapatalk 2
Click to expand...
Click to collapse
Sorry I wasn't trying to bust your stones. I haven't rooted yet because of all of the posts like yours. I've just seen more problems with flashing on this device then any other that I have with my past Droid devices. What we really need is apx (spelling?) Drivers and n7 files for a sure fire recovery from any disaster
Hopefully I don't have to start another thread.
I too think I bricked my Nexus 7.
I was having trouble and I accidentally cleared a file from the System UI app (its a system required app) which caused me to loose the 3 buttons on the bitten of the screen.
So I went to CWM to do a restore which said it failed.
After that it would not boot.
Its just stuck with the Google logo on the screen.
I held down the power up & down volume buttons and I get a screen that gives me that START button on the top right of the screen with the text in small size on the bottom left.
I can use the up and down volume to make the start button change to recovery mode or bootloader but activating them just goes to Google logo.
Can I recover or is it totally lost?
I also don't remember if I left the Nexus 7 in Debug mode which is usually required to perform custom Roms
Thanks
Rob
Sent from my SPH-D710 using Tapatalk 2

Help, please.

I bought my 13 year old sister a mytouch 4g off craigslist (she loses her phones a lot) and it was working fine at first. Set up her gmail and all that. Then I put in her old sim card, installed the facebook app and the phone froze. Went into bootloader and did a factory reset. Worked fine for a bit then it froze again. Now when I turn it on it gets stuck on the logo screen and when I try to reset via bootloader it freezes too. I'm trying to root it but usb debugging is not enabled and I can't get into the settings to enable it. I've been at it for hours, my brain is fried, can't think of anything solution. Someone please help me.
Makes me wonder if the eMMC chip hasn't gone bad. If so, you're SOL. You could try putting one of the PD15IMG.zip files on the sdcard and reinstall everything fresh -- certainly wouldn't hurt to try. If the PD15IMG file fails to install then that confirms you've got a borked eMMC.
beanboi said:
I bought my 13 year old sister a mytouch 4g off craigslist (she loses her phones a lot) and it was working fine at first. Set up her gmail and all that. Then I put in her old sim card, installed the facebook app and the phone froze. Went into bootloader and did a factory reset. Worked fine for a bit then it froze again. Now when I turn it on it gets stuck on the logo screen and when I try to reset via bootloader it freezes too. I'm trying to root it but usb debugging is not enabled and I can't get into the settings to enable it. I've been at it for hours, my brain is fried, can't think of anything solution. Someone please help me.
Click to expand...
Click to collapse
Well what the person above me said is possibly the only way you could get it to work. Do you want me to find a link for you?
Sent from my HTC Glacier using xda app-developers app
blacra said:
Makes me wonder if the eMMC chip hasn't gone bad. If so, you're SOL. You could try putting one of the PD15IMG.zip files on the sdcard and reinstall everything fresh -- certainly wouldn't hurt to try. If the PD15IMG file fails to install then that confirms you've got a borked eMMC.
Click to expand...
Click to collapse
Actually, it confirms your bootloader is corrupted. Either way, the phone is toast.
estallings15 said:
Actually, it confirms your bootloader is corrupted. Either way, the phone is toast.
Click to expand...
Click to collapse
The phone is so great except for this one issue
Sent from my myTouch 4G using xda app-developers app
N_otori0us_ said:
Well what the person above me said is possibly the only way you could get it to work. Do you want me to find a link for you?
Sent from my HTC Glacier using xda app-developers app
Click to expand...
Click to collapse
If you wouldn't mind. Most of the links I've found are dead except one, the one on cm's site. However when I do it, it says "Main version is older! Update Fail!"
beanboi said:
If you wouldn't mind. Most of the links I've found are dead except one, the one on cm's site. However when I do it, it says "Main version is older! Update Fail!"
Click to expand...
Click to collapse
I don't know man, without debugging your type of screwed.
Try to make a gold card, then put the pd15 on it, and then update it.
Sent from my myTouch 4G using xda app-developers app

Categories

Resources