Hello I have a problem and I need advice on Sapphire PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP10000)
CPLD-12
Radio-6.35.16.19, I do not know why but I can upload to your phone no recovery, system, boot userdata and recovery are delete.Consequently get only Hboot FastBoot-and perhaps some axle thank you in advance for your help
According your SPL-info, you have normal phone with normal combination hboot/radio. As you have S-OFF, you can use fastboot.exe utility to flash manually custom recovery
Search for AmonRa 1.6.2 patched by cursordroid recovery or get AmonRa HTC Hero recovery
Flash it by command
Code:
fastboot flash recovery recovery.img
(where recovery.img - your file recovery)
Then turn phone off and turn on by pressing Home + Power - your phone should load into recovery
Via recovery you can flash custom ROM with tags [32a][6.35] or [32a][NewRadio]
Download fastboot commander from my signature - magic version.
Use the "Magic 32A" tab.
Flash the "new" combo...
Good luck
Thank you and I will try to know if it helped
Hello helped so now the phone back in its original condition as I bought it, and now I can start from the beginning and re-root your phone right thank you.
Related
I have a rooted unlocked Magic 32b and have flashed many roms on it but it has suudenly stopped booting into recovery.
If i hold power and home it now just hangs on vodafone splash screen.
any ideas?
if you have an engineering SPL installed on the phone, you can use fastboot from the SDK to flash a new recovery image (assuming you can still get into fastboot mode on the phone)
Or you can go to Android Market and download ROM Manager & flash recovery through that application (both ClockWorkMod & Amon_RA supported). If the first flash fails don't worry just reflash the same recovery (2nd flash works every time)
Thanks for the help, I reflashed AMon-Ra recovery via fastboot and all is well.
I'm having exactly the same problem.
Think I flashed the 32a instead of 32b onto the magic uk vodafone device:
sapphire pvt 32A eng s-off h
hboot-1.76.2007 (sapp10000)
cpld-10
radio-6.35.10.18
aug 21 2009,18:19:15
Could you link to the recovery you managed to flash your phone using please? I've tried loads of versions via adb/flashboot and none work sadly.
Hoping I don't have to buy another phone
I have similar issue to original poster, I've flashed many roms over the last year and all have been fine until now
VOLDN+POWER, HOME+POWER, BACK+POWER are all no go.. all stuck on bootloader splash. Can someone confirm I've finally bricked my 32B?
Last SPL i put on was 1.76.2007 i think (cant confirm no fastboot..) radio was 2.22.19.26I
Hi all,
I've been trying to install the amon RA recovery rom on mg gf's magic, but I'm stuck in a loop.
I've got a non perfect SPL loaded which boots into cupcake
Sapphire PVT 32B Ship S-ON H
HBOOT-1.33.0009 (SAPP10000)
CPLD-10
RADIO-3.22.20.17
However when I try to run fastboot boot recovery.img it restarts and gets stuck on the splash screen.
I've re-made the sd card to be a gold card and I've still got the issue.
I've also tried running fastboot flash recovery recovery.img
and I get Infosignature checking... FAILED )remote : signature verify fail).
Can anyone help me sort this?
Many thanks
will
You're using a non-engineering SPL, so all fastboot commands will fail. 1.33.2005 has fastboot enabled and you should be able to flash it from your currect state, however I was on .26i radio when I flashed it so I don't know for certain.
EDIT: Since you're on cupcake you should be able to use flashrec to flash the recovery image, so not engineering SPL required!
Hi Adrian,
thanks so much for replying.
In the meantime I've tried another sappimg and this has taken me to 1.33.2010 which has let me fastboot flash recovery... but when I try to boot into recovery (hold home and restart) all i get is the htc magic spash screen
The other issue is that the rom ive now got is lacking the google tools and therefore market, so i cant get flashrec
Any thoughts?
thx
No problem about missing the market, do "adb install *Drag FlashRec APK here*", that will get it installed.
How long did you hold down home+power to get to recovery? The first time I did it after loading up Amon Ra's 1.7.0 it took me holding them for around 1.5-2 minutes before it finally booted in.
Hiya,
I waited about 5 mins or so
I've now got flashrec installed... looking for what to do next?
Here. Start at step 12 assuming you've already got a recovery image.
Hmm, just tried that and it flashes in an instant (too quick tbh!), so im wondering if this is because its already got the recovery on it from when i did it via fastboot
After restarting and holding home im still getting just the splash screen
Is there a way to view what is on the /recovery/ partition, or is there a reason its not wanting to boot into it?
thx
Which recovery image are you using?
billytkid said:
Hmm, just tried that and it flashes in an instant (too quick tbh!), so im wondering if this is because its already got the recovery on it from when i did it via fastboot
After restarting and holding home im still getting just the splash screen
Is there a way to view what is on the /recovery/ partition, or is there a reason its not wanting to boot into it?
thx
Click to expand...
Click to collapse
try
fastboot erase recovery, then reflash recovery
AdrianK said:
try
fastboot erase recovery, then reflash recovery
Click to expand...
Click to collapse
He can't complete any fastboot commands since he doesn't have an engineering SPL.
DonJuan692006 said:
He can't complete any fastboot commands since he doesn't have an engineering SPL.
Click to expand...
Click to collapse
I did tell him how to get one ;-P
Hopefully it won't come to that. I think he's loading the wrong recovery image.
recovery-RA-sapphire-v1.7.0G.img
Try re-downloading the recovery image from here and try flashing again. If it doesn't work I think your going to have to try going Adrian's route.
Better yet, you can get it from step 5 here for a quicker download.
Also, when you were in FlashRec running the "/sdcard/recovery-RA-dream-v1.2.3.img" command did you change recovery-RA-dream-v1.2.3.img to match the filename of your recovery image?
I've just managed to update the recovery, but strangely this is using the 32A recovery.. and not 32B.. but I've got a vodafone Magic
So I can now get into recovery and have followed the steps or dangerSPL, followed by cyanogen mod + gapps, but not i cant get it to fully start up and im stuck on splash screen
V confused now.. just checked in hboot and its still showing sapphire pvt 32b eng s-off H
Hboot 1.76.2007
radio 3.22.20.17
looks like the gf's not having a mobile tomorow.. oh dear im in trouble!
any ideas again much appreciated!
thx
Can you run any fastboot commands?
Yes I can now run fastboot commands and use the recovery tool
thx
Hi all,
hope to get some more help, sorry!!
After looking more into this it seems that one of the previous images i put on the 32b phone was a 32a radio... hence the issue with putting on the recovery image for the 32b not working.
So... i downloaded myTouch-radio-2_22_23_02.zip and using the recovery did an update from zip.. now however the phone boots and all i get is a picture of a box with an arrow pointing to an android robot (see attached!)
At this rate its looking like i need to buy a new phone!
cheers all
I've rooted my Magic, got Cyanogenmod running nicely, etc. I was then trying to flash a new splash screen, and noticed that my security in fastboot shows as begin on (S-ON). Sure enough it wouldn't let me flash the splash screen, it said the signature was not valid.
So, I tried flashing every single engineering SPL possible, and it never changes to off.
Here is my info from the fastboot/hboot screen.
SAPPHIRE PVT 32A ENG S-ON H
HBOOT 1.33.2010 (SAPP5000)
CPLD-12
RADIO-3.22.20.17
June 2 2009, 17:27:03
Thanks!
Find zipped hboot, put it in your sd card and flash it trough recovery...
pera987 said:
Find zipped hboot, put it in your sd card and flash it trough recovery...
Click to expand...
Click to collapse
That's what I've done. I've flashed every single engineering hboot file I can find and each one still shows S-ON during fastboot/hboot, and I"m unable to flash through fastboot.
Follow these steps (you should find it in this Mytouch Room)
1. Create your goldcard.
2. Comeback to 1.5 version by flashing rom 1.5 from goldcard.
3. Install Recovery Flasher (RF).
4. Run RF, chose Flash Cyanogen 1.4 img
5. Copy new E-SPL to root of Sdcard, Boot to Recovery mode, flash this file SPL
6. You can flash new recovery img (like 1.7.0G) by fastboot mode through your PC.
Check your new SPL now and S-ON becomes S-OFF.
I've successed on Magic 32B with perfect SPL 1.33.0006 and S-ON.
vinamilk said:
Follow these steps (you should find it in this Mytouch Room)
1. Create your goldcard.
2. Comeback to 1.5 version by flashing rom 1.5 from goldcard.
3. Install Recovery Flasher (RF).
4. Run RF, chose Flash Cyanogen 1.4 img
5. Copy new E-SPL to root of Sdcard, Boot to Recovery mode, flash this file SPL
6. You can flash new recovery img (like 1.7.0G) by fastboot mode through your PC.
Check your new SPL now and S-ON becomes S-OFF.
I've successed on Magic 32B with perfect SPL 1.33.0006 and S-ON.
Click to expand...
Click to collapse
Thanks. I'll give this a shot when I get home this afternoon.
PaulieORF said:
That's what I've done. I've flashed every single engineering hboot file I can find and each one still shows S-ON during fastboot/hboot, and I"m unable to flash through fastboot.
Click to expand...
Click to collapse
If this currently a 1.33.20** spl with s=off and a custom recovery can you please do the following
Run 'adb shell dump_image misc /tmp/misc_dat.img'
Then
'adb pull /tmp/misc_dat.img misc_dat.img'
Then send me the resulting image somehow (pm me a rapid share link or ask for my email.. there ought not be any identifiably info in misc but just in case)
This may or may not clear up why there is an issue.. and let a better process to fix it be created.. untill then try unrooting (or installing a stock spl) and re-rooting as was mentioned, just onto forget radio versions may change in the process requiring caution not to skip ahead of yourself and brick.
UPDATE:
So I got the file, misc was nearly all blank without the usual data (boot mode, CID and some other data) this is easily fixed by re-flashing misc from recovery.. I think this can even be made into an update.zip.. (since all magic/dream misc partitions are essentially the same besides the CID, and the CID is still being passed to the recoveries command line when stuck in this state.
Hello.
I have a Htc Vodafone Magic, de version.
A few days ago i rooted and install cyanogen 5.0.7 and the i've upgraded to 5.0.8.
I used titanium backup, made a backup, and then i need it to restore. After that i couldn't use the phone.
Then i inserted the goldcard made it earlyer, where i had the rom, and update it.
It was a rom 5.0.7 with no app and no android market, and no root.
Now started in fast boot (vol down + power) and i have :
sapphire pvt 32b eng s-off H
Hboot-1.33.2010 (SAPP10000)
cpld-10
radio3.22.20.17
jun 2 2009, 17:27:03.
When i try to instal a rom it said that he cannot find any rom.
I used the link [How-To] Root and un-root the T-Mobile myTouch 3G
to revert to 32b since i so that i have 32b eng s-off H and i thought that is the problem.
i used this commands
fastboot flash radio radio.img
fastboot erase system -w
fastboot erase boot
fastboot erase recovery
It did not work.
No the phone starts and locks on the image with HTC MAGIC.
Thank you for your help.
fastboot flash recovery recovery-RAv1.2.0G.img
No the phone starts and locks on the image with HTC MAGIC.
when the phone stats with usb in it appears fastboot on a red background.
And i cannot use adb commands.
It is bricked?
the fastboot option works. i send recovery-RA-sapphire-v1.7.0G thru fastboot and the message was okay.
I think you can download radio 2.22.23.02 as zip file, put it on root of memory card, boot to recovery mode, apply this zip. Everything will be OK.
I flashed it 2 days ago for udating for my Magic radio version from 2.22.19.26I.
You can find the file on this room or I will attach it later.
thank.
i used Revert to 32B Radio and ROM procedure and made it.
Hey guys,
Firstly...
PVT 32B
HBOOT-1.33.0013
CPLD-10
Radio-2.22.23.02
I'm pretty new to this game but I just installed Rushness' Frosense 0.9 on my Magic and it has been a MASSIVE improvement over CM 6.1 which came pre-installed on my phone that I ebay'd from Hong Kong. 6.1 was so slow it was unuseable.
Anyway, I would like to update my Radio/SPL to the latest version. I've done a lot of searching but have run into a few problems, mostly understanding lingo.
I have Radio: 2.22.27.08 & SPL: 1.33.0013d downloaded (I assume these are the ones I want) and I have backed up my SD card to PC. I figured the process would be the same as flashing the Frosense ROM, enter clockwork mod, hit clockwork recovery, hit "flash alternative recovery", power off, home + power, nand backup, wipe, flash radio, flash SPL, flash Frosense again. However after I "flash alternative recovery" and power off, pressing Home + Power just takes me to the MyTouch screen where it freezes. If I pull battery and power on as usual phone works ok. I decided to try and partition my SD through CWM (wasn't sure if this was necessary) but I'm not sure if the partition worked, phone started to reboot then froze on MyTouch screen again.
I'm assuming I'm doing something incorrectly. Sorry if I seem as "fresh" as I am, but I'm keen to learn and would be appreciative of some easy to understand steps if someone wouldn't mind.
Thanks,
See my guide found in my signature.
Just skip the rooting part if you already rooted.
Flash the recovery and continue with the eng spl.
Once you have the eng spl, you should do the following:
1)Download fastboot commander from my signature and reboot into fastboot
2)Flash the new radio
4)If it goes well, flash the new spl
5)If it goes well, restart into recovery and flash your rom. Remember it must have a compatible kernel.
If any step fails, STOP and post here.
For ref, see this thread: http://forum.xda-developers.com/showthread.php?t=831139
Here is some insight from my recent experience. I am new at this.
Started with:
Sapphire Pvt32 Dev s-on g
Hboot-1.33.3004 (sapp30000)
CPLD-10
Radio-2.22.19.26I
Version 1.5
Stepped to:
Hboot-1.33.3005 Eng
Then installed Amon Ra Recovery
Then BIG Step to:
Sapphire Pvt32 Dev s-on g
Hboot-1.33.3013d
CPLD-10
Radio-2.22.27.08
Version 2.3.5
Keys to success:
1. Get used to searching for what you need then READ as much as you can on Recovery, Radio and SPL(hboot) prior to starting any of the changes.
Especially helpful:
(Newbie resources: http://forum.xda-developers.com/showthread.php?t=794445)
http://forum.xda-developers.com/wiki/HTC_Sapphire_Hacking
(Magic SPL) http://forum.xda-developers.com/showthread.php?t=529019
(2708 Radio) http://forum.xda-developers.com/showthread.php?t=831139
2. When comfortable with how to set up Android SDK, root, installing custom recovery, fastboot and adb, you are ready to start:
3. Find an Eng S-off SPL(I used 1.33.2005) so you can fastboot flash:
fastboot flash boot [c:/boot.img]
(Magic SPL) http://forum.xda-developers.com/showthread.php?t=529019
4. Then flash amon ra recovery once then test (press/hold home + power....)
Search in XDA for this thread. fastboot flash recovery [c:/recovery.img]
5. fastboot flash new radio! (I tried using Amon Ra recovery radio.zip to install new radio but it stuck on unbox screen) After 40 min. I freaked out, pulled battery and luckily no damage/brick.
6. adb push your ROM of choice to /sdcard/
I just followed these steps by jeff72k. Note that these instructions are on the G1 forum but G1 is same as HTC Magic/Sapphire 32B. This worked very well especially for step-by-step through the partition setup for Ginger Yoshi which is working GREAT!
http://forum.xda-developers.com/showthread.php?t=1178665