Related
Have been attempting to extract Jawbreaker from XDAII ROM version 1.72.00WWE using dumprom without success due to the fact every time I run it on my laptop, XP Home edition tells me dumprom has encountered a problem and needs to be closed! Is there some fundamental basic I'm missing here (other than intelligence) with regard to extracting files from ROM?
I have used ROMdump to dump 64MB of ROM to my SD card, just need to be able to extract the files from this using dumprom or so my limited understanding of the procedure tells me. Am I even close?
BTW, have searched for Jawbreaker on this site, found a post by Sheran_G with links to download jawbreaker from an ftp site but the links no longer work. Anyone got Jawbreaker available to download, or better still, instructions on how to extract it myself? Reason I'm asking is my bro recently bought my XDA I off me and I've been putting games onto it for him but he's addicted to Jawbreaker on my XDAII, gotta get it for him so he stops hogging my phone!
windows games are small
my bet is that it's just 1 exe file
and if you just copy that exe file to your computer
and copy it to the device it will run
kieranbass said:
... XP Home edition tells me dumprom has encountered a problem and needs to be closed
Click to expand...
Click to collapse
You are using dumprom tool incorrectly. Here is how it should be run:
dumprom.exe -4 -d C:\Dumped C:\full_path_to_rom_image.nba
You should create "C:\Dumped" directory, files would be extracted there.
Thanks for the replies guys. I tried copying the Jawbreaker exe to my laptop but I get an error mesage saying exe files in ROM cannot be copied. As for using dumprom, I'm afraid I need a little more help! I'm unsure where the program should be run from, XP, the command prompt or from DOS? Thick as two short planks me.
I've attached file.
Hi,
jawbreaker also needs one .dll to run...
So here you have .cab package, which you can install...
Then go to: Start -> Programs -> Games -> Jawbreaker
buzz
buzz_lightyear. Your copy of Jawbreaker would not work on XDA1. It is for WM2003SE. My EXE file should work on WM2003 devices. It is an old version taken form Imate PPC 1.72 ROM that does not require additional DLLs.
mamaich said:
buzz_lightyear. Your copy of Jawbreaker would not work on XDA1. It is for WM2003SE. My EXE file should work on WM2003 devices. It is an old version taken form Imate PPC 1.72 ROM that does not require additional DLLs.
Click to expand...
Click to collapse
I see... well... )
did you get a new xda for you yet? or is yours still broken??
buzz
buzz_lightyear said:
did you get a new xda for you yet? or is yours still broken??
Click to expand...
Click to collapse
I've got Imate PDA2K and now I'm playing with it.
Sorry, it's a bit OffTopic... )
mamaich said:
I've got Imate PDA2K and now I'm playing with it.
Click to expand...
Click to collapse
Cool, can you buy them in Russia? For how much??
buzz
Re: Sorry, it's a bit OffTopic... )
buzz_lightyear said:
Cool, can you buy them in Russia? For how much??
Click to expand...
Click to collapse
I'm using this shop - http://www.webpanel.ru/products.aspx?Product=270
Price was about 850$ including wired headset from XDA1 (headset buttons are incompatible with PDA2K) and lots of useless stuff like russian localization and outlook 2002. Now I have 2 copies of English outlook 2002 and don't know what to do with them, I use 2003
Re: Sorry, it's a bit OffTopic... )
mamaich said:
buzz_lightyear said:
Cool, can you buy them in Russia? For how much??
Click to expand...
Click to collapse
I'm using this shop - http://www.webpanel.ru/products.aspx?Product=270
Price was about 850$ including wired headset from XDA1 (headset buttons are incompatible with PDA2K) and lots of useless stuff like russian localization and outlook 2002. Now I have 2 copies of English outlook 2002 and don't know what to do with them, I use 2003
Click to expand...
Click to collapse
hehe, you can always trash those two CDs )))
or use them as a frisbie for your dog.. ))))))
buzz
buzz_lightyear said:
Hi,
jawbreaker also needs one .dll to run...
So here you have .cab package, which you can install...
Then go to: Start -> Programs -> Games -> Jawbreaker
buzz
Click to expand...
Click to collapse
is there a way to provide version that operates in real VGA resolution as this one does not work on wm60
Would like info on two issues here:
1) How would I execute AT Commands against the modem? Would I have to build a C app? Or is there somthing knocking around that would do that already?
2) How can BTS scripts be executed outside of a BlueTooth action? Ideally at the commandline.
Cheers!
ionsphere said:
2) How can BTS scripts be executed outside of a BlueTooth action? Ideally at the commandline.
Click to expand...
Click to collapse
What scripts do you actually have in mind and
on what hardware ?
BTS Scripts
Those mentioned in this thread - I have attached some to this post too.
I'm looking at ways to get the Audio Gateway going on the PDA2k.
Cheers,
Alistair
Re: BTS Scripts
ionsphere said:
I'm looking at ways to get the Audio Gateway going on the PDA2k.
Click to expand...
Click to collapse
The code in this patch deals with TI bts on ipaq hx4700. It is the same TI chipset as on Blueangel
(BRF65xx):
http://userpage.fu-berlin.de/~zabel/hx4700/20050915/patches/bluez-utils-dbus-2.20-ti-bts.patch
Re: BTS File
Thanks. I am unsure why you pointed me at that code. Does it deal with the Audio Gateway?
How would I execute that code on the device?
Re: BTS Scripts
cr2 said:
ionsphere said:
I'm looking at ways to get the Audio Gateway going on the PDA2k.
Click to expand...
Click to collapse
The code in this patch deals with TI bts on ipaq hx4700. It is the same TI chipset as on Blueangel
(BRF65xx):
http://userpage.fu-berlin.de/~zabel/hx4700/20050915/patches/bluez-utils-dbus-2.20-ti-bts.patch
Click to expand...
Click to collapse
hx4700 has BRF6150 and BlueAngel has BRF6100. They are incompatible in scripts and in lots of other things.
Re: BTS Scripts
mamaich said:
hx4700 has BRF6150 and BlueAngel has BRF6100. They are incompatible in scripts and in lots of other things.
Click to expand...
Click to collapse
At least it can save some time with the tibinaryparser.dll
Can you suggest a better source of information about
BRF61xx ? I'm also interested in the audio data path
to make it work on Linux.
Re: BTS Scripts
I was unable to find any useful technical information on BRF61xx chips
Hello everybody!
Yesterday I found this thread (http://forum.xda-developers.com/showpost.php?p=1059865&postcount=1 , Change all 3 splash screens (new tut and scripts included) )
Because of the steps to take I decided to create a small tool to make this a little bit easier.It's a wizard (for a wizard ) which enables you to change 1,2 or all 3 the splashscreens.
I haven't tested it yet on my wizard. This because I don't have the tools and cables here to connect my wizard. (yet)
Attached are some screenshots and the application itself. Just extract and run the 'SplashScreen.exe'.
Systemrequirements:
.NET 2.0 Framework
MSVC 8.0 runtimes ( http://www.microsoft.com/downloads/d...displaylang=enhttp://www.microsoft.com/downloads/d...displaylang=en )
Additional screenshots
Some additional screenshots
it's good for the art P3300?
compatible with P3300 ARTEMIS htc ? thank for the post..
lepsyfou said:
compatible with P3300 ARTEMIS htc ? thank for the post..
Click to expand...
Click to collapse
I don't have an Artemis so I can't tell you this for sure. The tutorial doesn't say anything about other devices either.
someone try using this program? it isn't working on my PC
bzinko1 said:
someone try using this program? it isn't working on my PC
Click to expand...
Click to collapse
You need the .NET 2.0 framework. (sorry forgot to mention)
And further you need: (http://forum.xda-developers.com/showpost.php?p=1059865&postcount=1)
In order for this to work you need the MSVC 8.0 runtimes:
[URL="http://www.microsoft.com/downloads/d...displaylang=en"]http://www.microsoft.com/downloads/d...displaylang=en[/URL]
Click to expand...
Click to collapse
Looks promising.
It has potential, keep up the good work
Rhapsody said:
You need the .NET 2.0 framework. (sorry forgot to mention)
And further you need: (http://forum.xda-developers.com/showpost.php?p=1059865&postcount=1)
Click to expand...
Click to collapse
I have it.
This message to pop out
bzinko1 said:
I have it.
This message to pop out
Click to expand...
Click to collapse
i think its the MSVC 8.0 runtimes
Just noticed there was a new NBH put up today at DZO's Site.
Does anyone know if this has GPS5.0 and the Bluetooth stuff built in?
Electroz said:
Just noticed there was a new NBH put up today at DZO's Site.
Does anyone know if this has GPS5.0 and the Bluetooth stuff built in?
Click to expand...
Click to collapse
yes and yes
which file would i use with no rootfs to work with the new installer?
the ones that do not include the word rootfs in the file name; these have the new installer. choose the resolution you want.
nm - answered
PaceyWhitter said:
I would assume that the vogueimg-rootfs files are meant for vilords new no rootfs boot, correct?
Click to expand...
Click to collapse
incorrect. the ones that have rootfs in the name are meant to be used with the old rootfs. this was mentioned by dzo when he posted the second set of files. a quick way to find these things out is to find all post listed by a specific person - i.e. click on dzo's name and click find all posts; you'll know what he's been up to if he has documented it on the forum.
Nice seems to be working great far.
Electroz said:
Just noticed there was a new NBH put up today at DZO's Site.
Does anyone know if this has GPS5.0 and the Bluetooth stuff built in?
Click to expand...
Click to collapse
tatnai said:
yes and yes
Click to expand...
Click to collapse
i have to take this back. bluetooth works fine for me, however some GPS functions do not seem to work properly with the new files from dzo (navigation does not seem to get accuracy or direction anymore)
I wrote a simple app to configure Fiddler2 to change your device's brand to Nokia, here it is:
Edit: Application has been deleted.
EDIT:
Due to the new Here Drive+ which costs money without this "hack", I will delete this application from the internet on the 20th of Juli.
Use it while you can.
xdevilium said:
I wrote a simple app to configure Fiddler2 to change your device's brand to Nokia, here it is:
http://www.mediafire.com/download/2aiyq729x5rbsyu/Nokia_Portal.zip
No other tools needed except for Net. Framework 4.5
Enjoy.
Click to expand...
Click to collapse
how do we install this? sorry for the noob question im new to wp
nope
xdevilium said:
I wrote a simple app to configure Fiddler2 to change your device's brand to Nokia, here it is:
http://www.mediafire.com/download/2aiyq729x5rbsyu/Nokia_Portal.zip
No other tools needed except for Net. Framework 4.5
Enjoy.
Click to expand...
Click to collapse
Hi,
I tried it, however after setting up the proxy to my local IP (tried all types of IP addresses, none worked) in the WP8 Wifi settings, I simply couldn't load any page anymore with the phone - the internet was dead to it. Not even the certificate could be accessed.
I was using a computer attached to my home wireless router through cable, also tried accessing a computer that is directly connected to the internet, didn't work.
Did you check your program's functionality in other configurations as well?
~TheGoldrocker
Sorry
There is a bug in my software, I'm working on a fix today
Version 0.2 changelog
-Fixed major bugs
-Added video walkthrough
-Easier walkthrough
xdevilium said:
Version 0.2 changelog
-Fixed major bugs
-Added video walkthrough
-Easier walkthrough
Click to expand...
Click to collapse
Thanks! Works GREAT
But how do i install software from the SAMSUNG devices of HUAWEI devices on MY HTC device ?
I can only download for NOKIA devices
an you please explain how i can download from the huawei of samsung store ???
Megasounds
megasounds said:
Thanks! Works GREAT
But how do i install software from the SAMSUNG devices of HUAWEI devices on MY HTC device ?
I can only download for NOKIA devices
an you please explain how i can download from the huawei of samsung store ???
Megasounds
Click to expand...
Click to collapse
Working on it tonight
@xdevilium: Nice work! I am hoping to write an on-phone solution for this, but it turns out that implementing a proxy server using the APIs avaialble for WP8 apps is a pain. Well done on simplifying the use of an existing app like Fiddler.
GoodDayToDie said:
@xdevilium: Nice work! I am hoping to write an on-phone solution for this, but it turns out that implementing a proxy server using the APIs avaialble for WP8 apps is a pain. Well done on simplifying the use of an existing app like Fiddler.
Click to expand...
Click to collapse
Thanks!
I'm working on a WPF version of this app, more user friendly
BTW is it even possible to configure proxy from an app on WP?
I would like to see other marketplaces, kind of like a Marketplace Changer like we had with Windows Phone 7.8
For example, I am on Verizon with a Nokia 928, I would like to access AT&T apps and HTC apps...I even want a app from LG's marketplace...
it works!
But most Nokia apps will not install on my Ativ S , I was able to install the at&t locker app , lets get some HTC apps!
Good job
Version 0.3 changelog
Changelog
Option to install apps from HTC, Nokia and LG
New UI
Added captions for video
Bugs
LG apps won't show for me
Screenshots overlap
Can't run it
My PC is Windows 8.1 Preview + VS2012 SP2.
When I try to run the Nokia Portal WPF.application, I get an error.
The original information is in Chinese due to my system language.
It's about Microsoft.VisualStudio.ExtensibilityHosting 12.0.0.0 should be installed in GAC first.
twilightgod said:
My PC is Windows 8.1 Preview + VS2012 SP2.
When I try to run the Nokia Portal WPF.application, I get an error.
The original information is in Chinese due to my system language.
It's about Microsoft.VisualStudio.ExtensibilityHosting 12.0.0.0 should be installed in GAC first.
Click to expand...
Click to collapse
can you screenshot it?
xdevilium said:
can you screenshot it?
Click to expand...
Click to collapse
Attached.
I download the source code, and build it in VS, it's OK.
twilightgod said:
Attached.
I download the source code, and build it in VS, it's OK.
Click to expand...
Click to collapse
wierd, anybody else getting this?
One suggestion:
Can you make QR code for Step 6?
One question:
I have to do Step 6~11 every time when I want to install a new Nokia app? (I cannot download more than 1 app continuously?)
Yeb i have the same issue
xdevilium said:
wierd, anybody else getting this?
Click to expand...
Click to collapse
i have the same issue
i am running windows 8.0
megasounds
xdevilium said:
wierd, anybody else getting this?
Click to expand...
Click to collapse
Ok i got this error: