Would like info on two issues here:
1) How would I execute AT Commands against the modem? Would I have to build a C app? Or is there somthing knocking around that would do that already?
2) How can BTS scripts be executed outside of a BlueTooth action? Ideally at the commandline.
Cheers!
ionsphere said:
2) How can BTS scripts be executed outside of a BlueTooth action? Ideally at the commandline.
Click to expand...
Click to collapse
What scripts do you actually have in mind and
on what hardware ?
BTS Scripts
Those mentioned in this thread - I have attached some to this post too.
I'm looking at ways to get the Audio Gateway going on the PDA2k.
Cheers,
Alistair
Re: BTS Scripts
ionsphere said:
I'm looking at ways to get the Audio Gateway going on the PDA2k.
Click to expand...
Click to collapse
The code in this patch deals with TI bts on ipaq hx4700. It is the same TI chipset as on Blueangel
(BRF65xx):
http://userpage.fu-berlin.de/~zabel/hx4700/20050915/patches/bluez-utils-dbus-2.20-ti-bts.patch
Re: BTS File
Thanks. I am unsure why you pointed me at that code. Does it deal with the Audio Gateway?
How would I execute that code on the device?
Re: BTS Scripts
cr2 said:
ionsphere said:
I'm looking at ways to get the Audio Gateway going on the PDA2k.
Click to expand...
Click to collapse
The code in this patch deals with TI bts on ipaq hx4700. It is the same TI chipset as on Blueangel
(BRF65xx):
http://userpage.fu-berlin.de/~zabel/hx4700/20050915/patches/bluez-utils-dbus-2.20-ti-bts.patch
Click to expand...
Click to collapse
hx4700 has BRF6150 and BlueAngel has BRF6100. They are incompatible in scripts and in lots of other things.
Re: BTS Scripts
mamaich said:
hx4700 has BRF6150 and BlueAngel has BRF6100. They are incompatible in scripts and in lots of other things.
Click to expand...
Click to collapse
At least it can save some time with the tibinaryparser.dll
Can you suggest a better source of information about
BRF61xx ? I'm also interested in the audio data path
to make it work on Linux.
Re: BTS Scripts
I was unable to find any useful technical information on BRF61xx chips
Related
Have been attempting to extract Jawbreaker from XDAII ROM version 1.72.00WWE using dumprom without success due to the fact every time I run it on my laptop, XP Home edition tells me dumprom has encountered a problem and needs to be closed! Is there some fundamental basic I'm missing here (other than intelligence) with regard to extracting files from ROM?
I have used ROMdump to dump 64MB of ROM to my SD card, just need to be able to extract the files from this using dumprom or so my limited understanding of the procedure tells me. Am I even close?
BTW, have searched for Jawbreaker on this site, found a post by Sheran_G with links to download jawbreaker from an ftp site but the links no longer work. Anyone got Jawbreaker available to download, or better still, instructions on how to extract it myself? Reason I'm asking is my bro recently bought my XDA I off me and I've been putting games onto it for him but he's addicted to Jawbreaker on my XDAII, gotta get it for him so he stops hogging my phone!
windows games are small
my bet is that it's just 1 exe file
and if you just copy that exe file to your computer
and copy it to the device it will run
kieranbass said:
... XP Home edition tells me dumprom has encountered a problem and needs to be closed
Click to expand...
Click to collapse
You are using dumprom tool incorrectly. Here is how it should be run:
dumprom.exe -4 -d C:\Dumped C:\full_path_to_rom_image.nba
You should create "C:\Dumped" directory, files would be extracted there.
Thanks for the replies guys. I tried copying the Jawbreaker exe to my laptop but I get an error mesage saying exe files in ROM cannot be copied. As for using dumprom, I'm afraid I need a little more help! I'm unsure where the program should be run from, XP, the command prompt or from DOS? Thick as two short planks me.
I've attached file.
Hi,
jawbreaker also needs one .dll to run...
So here you have .cab package, which you can install...
Then go to: Start -> Programs -> Games -> Jawbreaker
buzz
buzz_lightyear. Your copy of Jawbreaker would not work on XDA1. It is for WM2003SE. My EXE file should work on WM2003 devices. It is an old version taken form Imate PPC 1.72 ROM that does not require additional DLLs.
mamaich said:
buzz_lightyear. Your copy of Jawbreaker would not work on XDA1. It is for WM2003SE. My EXE file should work on WM2003 devices. It is an old version taken form Imate PPC 1.72 ROM that does not require additional DLLs.
Click to expand...
Click to collapse
I see... well... )
did you get a new xda for you yet? or is yours still broken??
buzz
buzz_lightyear said:
did you get a new xda for you yet? or is yours still broken??
Click to expand...
Click to collapse
I've got Imate PDA2K and now I'm playing with it.
Sorry, it's a bit OffTopic... )
mamaich said:
I've got Imate PDA2K and now I'm playing with it.
Click to expand...
Click to collapse
Cool, can you buy them in Russia? For how much??
buzz
Re: Sorry, it's a bit OffTopic... )
buzz_lightyear said:
Cool, can you buy them in Russia? For how much??
Click to expand...
Click to collapse
I'm using this shop - http://www.webpanel.ru/products.aspx?Product=270
Price was about 850$ including wired headset from XDA1 (headset buttons are incompatible with PDA2K) and lots of useless stuff like russian localization and outlook 2002. Now I have 2 copies of English outlook 2002 and don't know what to do with them, I use 2003
Re: Sorry, it's a bit OffTopic... )
mamaich said:
buzz_lightyear said:
Cool, can you buy them in Russia? For how much??
Click to expand...
Click to collapse
I'm using this shop - http://www.webpanel.ru/products.aspx?Product=270
Price was about 850$ including wired headset from XDA1 (headset buttons are incompatible with PDA2K) and lots of useless stuff like russian localization and outlook 2002. Now I have 2 copies of English outlook 2002 and don't know what to do with them, I use 2003
Click to expand...
Click to collapse
hehe, you can always trash those two CDs )))
or use them as a frisbie for your dog.. ))))))
buzz
buzz_lightyear said:
Hi,
jawbreaker also needs one .dll to run...
So here you have .cab package, which you can install...
Then go to: Start -> Programs -> Games -> Jawbreaker
buzz
Click to expand...
Click to collapse
is there a way to provide version that operates in real VGA resolution as this one does not work on wm60
Just found this and tried it - working fine!
Features:
Enable GPS Settings
Enable and show the Wireless plugin in Today screen
Disable the OEM/Carrier Phone Skin
Remove Battery and Wireless Manager from Tray Icon
Disable SMS Sent Notification
Show Cap/Shift State
Enable and Mount Extended ROM
Improve Bluetooth Stereo A2DP Sound Quality
Enable/Disable HSDPA
http://www.theunwired.net/?itemid=3256
Download:
http://www.fit4cat.de/thread.php?threadid=56 you need an account to download
Hi,
Can you post link to the program?
Gilbert
I think it will be fair, that we download the programm from the site of the developer.
So you can visit his site and register in the forum. I think he will do many updates of this small goodie, so he need some of our support. If everyone can download the proggie from anywhere else, its possible that he will not put more development power on it.
Think about it :wink:
Use this user/pass for download:
user: foobar
pass: barfoo
So, the author can keep track of downloads and you don't have to register...
pof said:
Use this user/pass for download:
user: foobar
pass: barfoo
So, the author can keep track of downloads and you don't have to register...
Click to expand...
Click to collapse
i think this is not correct, but without xda-developers i have no information for build this Application.
For alll users who can unterstand german, please register, thanks.
All other can use this account for next time.
Have all fun with my tool !
and thanks to xda-developers forum for all this informations !
the user/pass is not working
Thanks,
Gilbert
Gilbert said:
the user/pass is not working
Thanks,
Gilbert
Click to expand...
Click to collapse
is it working !
thanks bongo user, I think you programmed a great tool. helped a lot to me even though I can't check whether hsdpa is really working because there is no specific sign (h instead of u for example) on the hermes to see whether I am in hsdpa or in normal umts.
i have downloaded the software, but have no idea as to what to do with what i have downloaded.
I unpacked the file, amd it is just a bunch of cab files... Unfortunately, I am not sure as to how to proceed from there in order to get the program to work on my Tytn...
Can anyone please help me out? I am new to pocketpc devices in general and don't know my way around yet...
jigga009 said:
i have downloaded the software, but have no idea as to what to do with what i have downloaded.
I unpacked the file, amd it is just a bunch of cab files... Unfortunately, I am not sure as to how to proceed from there in order to get the program to work on my Tytn...
Can anyone please help me out? I am new to pocketpc devices in general and don't know my way around yet...
Click to expand...
Click to collapse
Copy this cab file to your device.
run this cab file like an "EXE File.
Then it installed my App.
thankyou for the quick response... I am going to try this out and then report back
That's a nice tool.
However, I chose to remove the communications manager from the system tray, but now the battery icon is gone too, even though I have not checked that box. And I actually like the battery indicator.
Checking and unchecking the battery indicator checkbox yields no results. Do you have any suggestions?
BongoUser said:
pof said:
Use this user/pass for download:
user: foobar
pass: barfoo
So, the author can keep track of downloads and you don't have to register...
Click to expand...
Click to collapse
i think this is not correct, but without xda-developers i have no information for build this Application.
Click to expand...
Click to collapse
Sorry BongoUser, I just wanted to make it easy for non german speakers... you can delete the account if you want.
I also updated the wiki information with fit4cat Hermes Tweaker:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Will you be updating it when we add more registry tweaks to this page like the registryWizard guy does?
hmm... no luck...
I copied it via activesync to my documents folder on the tytn.....
When i open the file i see a bunch of little files that cannot be opened since they are not associated with any programs...
Can you please give me a step by step instruction as to getting this program working? Thanks again!
EDIT: got it! i was unzipping the file before sending it to the ppc, when i should just have sent the file over as it came
pof said:
Sorry BongoUser, I just wanted to make it easy for non german speakers... you can delete the account if you want.
I also updated the wiki information with fit4cat Hermes Tweaker:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Will you be updating it when we add more registry tweaks to this page like the registryWizard guy does?
Click to expand...
Click to collapse
No problem. as long as i don't have a english register page and other english templates for my board it is ok.
Thanks for updating wiki
Yes i plan a new release next week with new features from wiki site.
jigga009 said:
hmm... no luck...
I copied it via activesync to my documents folder on the tytn.....
When i open the file i see a bunch of little files that cannot be opened since they are not associated with any programs...
Can you please give me a step by step instruction as to getting this program working? Thanks again!
EDIT: got it! i was unzipping the file before sending it to the ppc, when i should just have sent the file over as it came
Click to expand...
Click to collapse
How you open this file ??
Double Click in File Explorer will install it.
don't unpack it with winzip....
Next release i make a setup.exe for windows pc's.
BongoUser said:
Yes i plan a new release next week with new features from wiki site.
Click to expand...
Click to collapse
Great!
You can also have a look at Universal and Wizard registry tweaks, most of them are generic WM5 tweaks, not device specific.
Some links:
http://forum.xda-developers.com/viewtopic.php?t=39725
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Hi Bongouser..
All i had to do was to copy the file over to my documents folder in the pocket pc WITHOUT unzipping it.
I then clicked on the file in the pocketpc and it installed...
I think my problem was that i was looking for an exe file somewhere to click on to install the program..
It works great though!
I do have a question about the sound quality adjustment for the bluetooth headphones...
what is the default setting from the factory for this on the Tytn?? I am just trying to compare the different levels to the standard so that i can decide which I like best.
Thanks!
jigga009 said:
I do have a question about the sound quality adjustment for the bluetooth headphones...
what is the default setting from the factory for this on the Tytn?? I am just trying to compare the different levels to the standard so that i can decide which I like best.
Thanks!
Click to expand...
Click to collapse
Uncheck the Checkbox, then default will be set.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Read the this part: Improve BT A2DP sound quality
Then you can the the default settings too.
pof said:
BongoUser said:
Yes i plan a new release next week with new features from wiki site.
Click to expand...
Click to collapse
Great!
You can also have a look at Universal and Wizard registry tweaks, most of them are generic WM5 tweaks, not device specific.
Some links:
http://forum.xda-developers.com/viewtopic.php?t=39725
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
i know i know
i test all tweaks before i include it in my application.
Attached: IBM J9 Java (weme-wm50-arm-midp20_6.1.0.20060727-102926)
Packed as CAB (no need to copy files manually), with *.jad and *.jar associations.
Files:
install.pdf from IBM - how to install (not needed), how to use.
J9_full 6.1.0.20060727-102926.CAB - full installation - Java Virtual Machine, Midlet manager, Midlet runner, libraries. Size after install - 3.4Mb
J9_tiny 6.1.0.20060727-102926.CAB - simplified installation. Without Java Virtual Machine (probably you don't need), without debugging support (probably you don't need), without eastern languages support (sorry, they are too big for me). Only Midlet manager, Midlet runner, libraries. Installs automatically into main storage. Size after install - 2.3Mb
thanks for this. I had the WM2003 version and was annoying not being able to use the soft buttons in the Midlet Manager
ibm-weme-wm50-sp-arm-midp20-6.1.0
Is there any chance someone could also post the smartphone installer?
thanks man... that help me.
Just an FYI. I still can not see JPEG sattelite imagery in google maps. the wm2003 version let me but not this version or the built in intent java.
is there a chance that this version support internet over proxy settings. lixe vor o2 wap flat. i can´t find find reg settings like for the built in midletmanager on my hermes.
trojan9x said:
Just an FYI. I still can not see JPEG sattelite imagery in google maps. the wm2003 version let me but not this version or the built in intent java.
Click to expand...
Click to collapse
Did you install the full version?
I tried the tiny version first, then the full version and it didn't make a difference
Can you redo the cab so when we install it, we have choice to where we want to install it? I want ot install it into my storage card. Thanks!
Also, anyone having problems getting the shortcut parameters "-xjam:run=1" to work? I had it working w/ the older version of the Java. This automatically runs the first program in the menu, which makes it more convenient than having to manually choose it.
Thank-you
Yes thank-you that helped me too.
Hi
Sorry for my supid question but : what is the difference with this one and the midlet manager already installed on HTC devices ? Is it a version for developpers ?
Cheers.
Sorry. I was off line.
trojan9x said:
thanks for this. I had the WM2003 version and was annoying not being able to use the soft buttons in the Midlet Manager
Click to expand...
Click to collapse
As I can see - this version doesn't support soft buttons too.
karlossus said:
Is there any chance someone could also post the smartphone installer?
Click to expand...
Click to collapse
Sorry. I don't know how to do it
trojan9x said:
Just an FYI. I still can not see JPEG sattelite imagery in google maps. the wm2003 version let me but not this version or the built in intent java.
Click to expand...
Click to collapse
Yes
jambaj0e said:
Can you redo the cab so when we install it, we have choice to where we want to install it? I want ot install it into my storage card. Thanks!
Click to expand...
Click to collapse
Use full version.
Imer said:
Hi
Sorry for my supid question but : what is the difference with this one and the midlet manager already installed on HTC devices ? Is it a version for developpers?
Click to expand...
Click to collapse
Probably - you will not see any differences. Me too
In my opinion: IBM Java for Linux is the best of the best. I believe that IBM knows everything about Java. I believe, that J9 is the best of the best too
But probably midlets are not too complicated to see any differences between Java Virtual Machines
baniaczek said:
trojan9x said:
Just an FYI. I still can not see JPEG sattelite imagery in google maps. the wm2003 version let me but not this version or the built in intent java.
Click to expand...
Click to collapse
Yes
Click to expand...
Click to collapse
Can you still use the traffic feature in google maps.
Imer said:
Hi
Sorry for my supid question but : what is the difference with this one and the midlet manager already installed on HTC devices ? Is it a version for developpers ?
Cheers.
Click to expand...
Click to collapse
J9 gave me nothing compared with Intent.
In fact, I find it panifully slow compared to the former one. For example, it takes almost 25 seconds for MGMaps to load a screen with J9, 8 to 10 seconds for Intent...
How about 3D?
How about the new version 6.1.1 ??
Strik3r said:
How about 3D?
Click to expand...
Click to collapse
No 3D support at all. And, for that matter, no for example Nokia support either.
goodghost said:
How about the new version 6.1.1 ??
Click to expand...
Click to collapse
Read my review at http://forum.xda-developers.com/showthread.php?t=288119 (and make sure you follow the General forum / use the forum search engine if you need to look for reviews )
i have a question about the full version:
can i install it onto my storage card?
How to install .net cf2 on ppc2002 device?
fantom2007 said:
How to install .net cf2 on ppc2002 device?
Click to expand...
Click to collapse
Here ya' go. Install to the device, not the storage card.
Next time please search for your needs before posting.
ThankU.
I'm having file upload problems at the moment. Anywhere you see my name (in blue) click on it, then click on find all posts made by me. You should find the cab file where I posted in previous threads.
hotdog53 said:
Here ya' go. Install to the device, not the storage card.
Next time please search for your needs before posting.
ThankU.
I'm having file upload problems at the moment. Anywhere you see my name (in blue) click on it, then click on find all posts made by me. You should find the cab file where I posted in previous threads.
Click to expand...
Click to collapse
Download the file from here:
www.ppcfreewarez.com
bottom of page.
hotdog53 said:
Download the file from here:
www.ppcfreewarez.com
bottom of page.
Click to expand...
Click to collapse
Well, actually, it's the WM5-only CAB file of the very first version (after that, two Service Packs have been released; the latest can be found at http://www.winmobiletech.com/sekalaiset/CF2SP2/ for both WM5+ and WM2003(SE)). Completely useless on a PPC2k2 device.
CF2, in general, isn't compatible with PPC2k2 at all. There MIGHT be hacks that made it work on WinCE 3.0-based devices but I don't know of any of them.
Thank for all.
For reason, I created 1st "Hello world" in vs2005 and debug & deploy it in to ppc2002 device but vs2005 show alert "Can't not deploy to your device, It not supported"
.....
Sorry my English so bad.
fantom2007 said:
Thank for all.
For reason, I created 1st "Hello world" in vs2005 and debug & deploy it in to ppc2002 device but vs2005 show alert "Can't not deploy to your device, It not supported"
.....
Sorry my English so bad.
Click to expand...
Click to collapse
Try compiling it for CF1.
I know this sounds very rude and I apologize in advance but I just can't stop my self from saying it:
Try using a real programing language
Seriously though, VS 2005 is not a good tool if you want to develop for devices as old as those based on PPC 2002.
It doesn't even recognize the SDK for that platform.
That among other things means you will have to deploy manually and will not be able to use any of the remote tools including the debugger.
Plus, having to install CF 1 is not too pleasant for the users of these devices because it takes up quite a lot of precious RAM memory.
Personally I would recommend using eMbedded Visual C 3 (not 4!) for that particular platform.
If you do not know C/C++ you could try eMbedded VB (comes in same package as EVC 3).
Just noticed there was a new NBH put up today at DZO's Site.
Does anyone know if this has GPS5.0 and the Bluetooth stuff built in?
Electroz said:
Just noticed there was a new NBH put up today at DZO's Site.
Does anyone know if this has GPS5.0 and the Bluetooth stuff built in?
Click to expand...
Click to collapse
yes and yes
which file would i use with no rootfs to work with the new installer?
the ones that do not include the word rootfs in the file name; these have the new installer. choose the resolution you want.
nm - answered
PaceyWhitter said:
I would assume that the vogueimg-rootfs files are meant for vilords new no rootfs boot, correct?
Click to expand...
Click to collapse
incorrect. the ones that have rootfs in the name are meant to be used with the old rootfs. this was mentioned by dzo when he posted the second set of files. a quick way to find these things out is to find all post listed by a specific person - i.e. click on dzo's name and click find all posts; you'll know what he's been up to if he has documented it on the forum.
Nice seems to be working great far.
Electroz said:
Just noticed there was a new NBH put up today at DZO's Site.
Does anyone know if this has GPS5.0 and the Bluetooth stuff built in?
Click to expand...
Click to collapse
tatnai said:
yes and yes
Click to expand...
Click to collapse
i have to take this back. bluetooth works fine for me, however some GPS functions do not seem to work properly with the new files from dzo (navigation does not seem to get accuracy or direction anymore)