At first, I tried installing ROM Manager. However, that didn't work at all, so I just uninstalled it. Then I tried Droid X Bootstrap. That booted up, but it was a black screen. I read online that it didn't work with GB, so I installed Droid 2 Bootstrap. This time, it showed the main menu, but upon selecting a menu entry, I got a black screen. Then, thinking that the DX bootstrapper may not have been completely removed, I followed a guide on deleting the DX bootstrapper files. Tried it again, didn't work. I turned off USB Debugging, and it still didn't work. However, I then reinstalled the DX bootstrapper (I read that DX bootstrapper worked when USB debugging was turned off), and I got the same result: black screen when selecting any option.
What problem could this be? =/
Thanks in advance!
If I understand you correctly, it sounds like you might just be pressing the incorrect button in the menu. Use the camera button to make your selection, not the power button as this will just turn the screen off and on.
programmer8922 said:
If I understand you correctly, it sounds like you might just be pressing the incorrect button in the menu. Use the camera button to make your selection, not the power button as this will just turn the screen off and on.
Click to expand...
Click to collapse
I don't have the DX with me right now, but I am pretty sure that'll be it! I'm quite used to the bionic and GN controls.
Thanks!
Related
so i installed the black out theme for the droid x and it installed, but after i installed it the home button doesnt work.. and when i hold the home button the only thing that shows up is "power off" and my lockscreen doesnt work also, i press the lock button and it brings me straight to my homescreen. i never had this problem untill i installed that theme. I tried everything already, did a batter pull, restored a nandroid backup, sbfd it and it won't work, the camera button isn't working either
If you sbfed properly and pulled battery for a few minutes, then I think its time for replacement
i just got a new one tho, its too expensive lol. its like part of the system is missing, everytime i reboot, it deletes some of my apps.
freshk3v1n said:
i just got a new one tho, its too expensive lol. its like part of the system is missing, everytime i reboot, it deletes some of my apps.
Click to expand...
Click to collapse
are you sure you're doing the right sbf file? what's the file name and size. what steps are you doing to install it?
also, just in case your mem card is bad, take it out and leave it out.
im using this one..."VRZ_MB810_2.3.15_1FF_01.sbf" and im using rsd lite v 4.7.. i've tried it like 3 times already and the phone is still the same
I have a droid 2 rooted running 2.3.20.a955 07 kernel and fission 2.1 I think the rom version is about 2 months old. My screen is broke and I have to send it in to verizon its going through there warranty as a defect there sending me a replacement by tue/wed. I have to send in my defective phone within 6 days or something.
1. How if possible can I do factory reset/wipe my phone Sbf?
2. My phone even though the screen is broke it works the screen does not work I can hit the power button and the keys light up or go dim, I have kept it on the charger and my phone is set to usb debugging enabled.
3. Where can I find the correct sbf file/instructions for my version(if possible).
Thanks in advance
First and foremost, is the screen physically damages? It would be tough to SBF without a display at all.
Sent from my DROID2 using XDA App
My screen doesn't function at all, I didn't drop it, one of my keys when opening my phone slide back into the phone and then after a few slides the screen went blank.
I think it's possible to sbf but there would be no way of checking if it worked or if you are in the bootloader where you need to be to flash the sbf.
Maybe you could check if you connected it to a computer afterward and if your phone is set to make a noise when connected via USB you might see a change but other than that there wouldn't be a way to check to see if it worked.
Sent from my DROID2 using XDA App
Turn the phone off, plug it in to your computer, and turn it on. I've always found when my phone is plugged in to my computer and I turn it on, it automatically goes into the bootloader. Flash the SBF, obviously if it gets some sort of error, then it wasn't in the bootloader. If it successfully finishes, I think it would be safe to say that it worked. At this point, it's worth a shot.''
SBF Instructions:
http://forum.xda-developers.com/showthread.php?t=770224
SBF Download:
hxxp://www.droidforums.net/forum/droid-2-hacks/98972-need-2-3-20-sbf-file-where-download.html (replace xx with tt)
Alright sounds like I have some hope, I know that if I pull my battery in and out twice it kicks me to boot recovery.
orki's suggestions sound pretty good.
1) Perform an SBF, you can do this without seeing the screen. Just boot the phone in bootstrap (i forget what to hold but i think it is up key + power). Launch rsdLite and it will detect your phone, then perform an SBF. Wait until rsdlite says the phone is booted and complete.
(We are gonna do this without a screen so just do what I say...)
2) Pull the battery and then replace it.
3) Reboot the phone holding X+power (this will take you to the stock recovery)
4) Press volume down 3 times
5) Press camera
6) Press the menu button repeatedly for about 2-3 minutes (the stock recovery can hang when you are resetting to factory so thats why the repeated presses). You can also try sliding the phone closed and waiting 2-3 minutes (sometimes if it is closed it won't hang), but it is probably safer to just tap the ok key (menu). You can always repeat this step if you are worried or feel it might not have worked.
7) After a few minutes you should be able to press the camera button and the phone will reboot. It is now completely and totally stock. You can also just pull the battery and reboot at this point also and no harm will be done.
I know I have Few or no posts at all... but I am quite experienced with Android OS... I wish i could have contributed more to this forum before asking for help on such an INTRICATE problem.. Anyways
The rundown is this, in the sequence in which the things occured... Today i set my phone down, (Droid X, Rooted, Running Apex 1.4.1) and it was working perfectly fine. I then pick it up, absolutely nothing had been done to it between me setting it down and picking it up, and the hard buttons (Menu, Home, Back, Search, Volume Rockers, Camera Button) all not working, only the lock button on top. So, I think like I always do, Battery pull time. I preform a pull, and turn the phone back on, then it's stuck on "M", just stays there. I pull again, stuck again, nothing, one more time and it goes to stock recovery mode just the Android and Exclamation triangle, (I have clockworkmod installed) but of course, no hardbuttons are working so it's false hope. I press buttons over and over out of frustration and I bring up the menu, but that's all i can do, and i have to hold the Volume rocker down, and search to even do that, but besides that i can do nothing more. So I'm stuck at what I see as a dead end, can't move through recovery because buttons aren't working for whatever reason, so i can't flash SBF, or stock reset... So I'm asking for help, please.
wunsung said:
I know I have Few or no posts at all... but I am quite experienced with Android OS... I wish i could have contributed more to this forum before asking for help on such an INTRICATE problem.. Anyways
The rundown is this, in the sequence in which the things occured... Today i set my phone down, (Droid X, Rooted, Running Apex 1.4.1) and it was working perfectly fine. I then pick it up, absolutely nothing had been done to it between me setting it down and picking it up, and the hard buttons (Menu, Home, Back, Search, Volume Rockers, Camera Button) all not working, only the lock button on top. So, I think like I always do, Battery pull time. I preform a pull, and turn the phone back on, then it's stuck on "M", just stays there. I pull again, stuck again, nothing, one more time and it goes to stock recovery mode just the Android and Exclamation triangle, (I have clockworkmod installed) but of course, no hardbuttons are working so it's false hope. I press buttons over and over out of frustration and I bring up the menu, but that's all i can do, and i have to hold the Volume rocker down, and search to even do that, but besides that i can do nothing more. So I'm stuck at what I see as a dead end, can't move through recovery because buttons aren't working for whatever reason, so i can't flash SBF, or stock reset... So I'm asking for help, please.
Click to expand...
Click to collapse
have you tried getting it into bootloader mode?
hold vol - + camera + search while powering the device on
if you can get into bootloader mode than you can flash an sbf file
If you tried everything you can think of and still can't get it to do anything take it back to verizon. If you can't get it to work I doubt most of the employees at verizon would be able to get it to work either
Did you try a long battery pull. 30 seconds or more?
Sent from my Droid
Pull the battery and then.plug the phone into.the wall charger. Then put the battery back in, and when the phone boots up it should boot to clockwork
Sent from my DROIDX using XDA App
Did this work?
As suggested, starting a new thread.
Hello,
Straight to the point, Rooted UK Atrix, running 2.3.4. no other MOD OR rom or anything, i like motoblur.
Stupidly Used Bloatfreezer to freeze 'home' without having another launcher to return to. Can't use the phone now. Trying to reset (hard or soft i do not know the difference) and the phone reads ''fastboot'' then i toggle down using volume - to android recovery and the phone is coming up with starting rsd protocol x2 and nothing else (using the power + & - methods).
If i leave my phone to just boot it resides on a white screen teasing me with noises of logging in but i cannot see anything.
I'm really lost to be honest, i have no idea what to do and i am not good with terminology either (adw, flashboots, cm7 i have no idea what they are).
I know there are sooo many threads with different answer's so that is why i am starting a new thread.
To factory reset using recovery...
1.Power off the phone, press and hold volume down button, press power button.
2.Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", press Vol up key
3.Wait for the "triangle ! / Android" screen then release the volume down button
*4.Tap on bottom right corner of the screen (may take a few times). a menu will come up
5.Tap on "wipe data/factory reset", and press OK. Another Confirmation screen will come. Press Yes and OK
6.After userdata is cleared, the "reboot system now" option will be highlighted by Default. Press OK.
7.Phone will reboot to initial setup MOTOBLUR screen.
NOTE/If on Android 2.3.4 then replace step #4 with pressing both Volume buttons at the same time. Also, use the Power button to activate the highlighted option instead of looking for the OK.
Sent from Rob's Atrix
atrixuk said:
As suggested, starting a new thread.
Hello,
Straight to the point, Rooted UK Atrix, running 2.3.4. no other MOD OR rom or anything, i like motoblur.
Stupidly Used Bloatfreezer to freeze 'home' without having another launcher to return to. Can't use the phone now. Trying to reset (hard or soft i do not know the difference) and the phone reads ''fastboot'' then i toggle down using volume - to android recovery and the phone is coming up with starting rsd protocol x2 and nothing else (using the power + & - methods).
If i leave my phone to just boot it resides on a white screen teasing me with noises of logging in but i cannot see anything.
I'm really lost to be honest, i have no idea what to do and i am not good with terminology either (adw, flashboots, cm7 i have no idea what they are).
I know there are sooo many threads with different answer's so that is why i am starting a new thread.
Click to expand...
Click to collapse
Can you get to android market via your computer? If so go to it, log in, find a launcher and install to your phone. Once rebooted to the phone, it *should* give you a choice or just automatically choose the new launcher. What does double tapping your home button bring you too? I was able to find my alternative launcher by moving around via that.
sounds like ya have frozen system files
prolly be easyest to unlock bootloader and push a custom rom to it (they work better than stock anyway
Yes i did freeze the home app.
I really mean thanks to those replied. Unfortunately i have tried the first suggestion but it doesn't let me get to step 3 with the triangle, fast boot - android recovery - can't fast boot 2 etc can't get passed that.
i have just plugged it in the Laptop, taking sim out, and it has started! i thought it was broken!! but unfortunately not 'home' yet...
SO it is at the motoblur login screen, should i log in? press factory reset? Any suggestions?
I'm not sure how to push an app straight to phone so i can install a launcher...
we're nearly there guys!
In addition to what Robkort said a few posts up ^^^ to get into the recovery on 2.3.4 you may have to scroll down once you see fastboot, until you see "Android Recovery" and press vol up - when the android dude comes up, if tapping the bottom right corner doesnt get you into recovery, press BOTH volume buttons at the same time.
It is now up and working with me just simply plugging it in, running moto sync, logging in to market from laptop and sending the launcher app..
Wifi was enabled luckily before i froze home, so when i pressed log in it went 'error' then launcher pro just popped up so now i think i just unfreeze home, turn it off, put my sim in and fingers crossed..
wish me luck!
Yahooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!
It's worrying how much happier i am now that i am back on top with my phone working. Pretty dependant we become!
All my widgets, and motoblur have gone, and some writing is in a different language :/ universal inbox is not there either.
Still Thanks for all the suggestions!
I suggest this thread should be 'FROZEN' or just stay open if anyone ever freezes 'home' without having another launcher installed.
I'm glad i didn't need to flash anything, put other ROMS on, hard reset losing everything, solved pretty simple luckily.
Hello, first off I will say I am a total novice when it comes to messing with my phone as my upgrade is in a month so I took the plunge and all was well at first. I used SuperOneClick to root my Flipside which runs Froyo 2.2.2. I deleted the bloatware as that was my main goal. This all took place about 2 weeks ago, and no problems existed.
Yesterday when I was reading a simple text message my flipside automatically reset itself and became lodged at the Motorola M logo. I've had this issue in the past before rooting so I just removed the battery in hopes all would work well as before, sadly that wasn't the case. My phone then booted up and only the backlight appeared on the screen causing it to become stuck in the infinite bootloop. I've tried all the different hard resets with the x button and power button, the volume down button, etc. None of them work as only the backlight comes up on my screen so I can't see anything. Is there any way to unroot it or flash it back to stock?
If any of my terminology seems out of place then sorry, I honestly have not a slightest idea what to do nor what is occurring other than the bootloop.
Any help is appreciated and can you please dumb down the answer for me if possible. Thanks!
Kippyyy said:
Hello, first off I will say I am a total novice when it comes to messing with my phone as my upgrade is in a month so I took the plunge and all was well at first. I used SuperOneClick to root my Flipside which runs Froyo 2.2.2. I deleted the bloatware as that was my main goal. This all took place about 2 weeks ago, and no problems existed.
Yesterday when I was reading a simple text message my flipside automatically reset itself and became lodged at the Motorola M logo. I've had this issue in the past before rooting so I just removed the battery in hopes all would work well as before, sadly that wasn't the case. My phone then booted up and only the backlight appeared on the screen causing it to become stuck in the infinite bootloop. I've tried all the different hard resets with the x button and power button, the volume down button, etc. None of them work as only the backlight comes up on my screen so I can't see anything. Is there any way to unroot it or flash it back to stock?
If any of my terminology seems out of place then sorry, I honestly have not a slightest idea what to do nor what is occurring other than the bootloop.
Any help is appreciated and can you please dumb down the answer for me if possible. Thanks!
Click to expand...
Click to collapse
Yup just rsd the sbf back. You will lose everything however so hopefully you've got a backup somehow. Here's the sbf
http://db.tt/H2RuCD8h
Okay so I've downloaded RSD Lite, and I have the file. The problem is I cannot get my phone into bootloader mode or recovery mode so that it will stop the infinite bootloop to stay connected to my computer. Advice?
Kippyyy said:
Okay so I've downloaded RSD Lite, and I have the file. The problem is I cannot get my phone into bootloader mode or recovery mode so that it will stop the infinite bootloop to stay connected to my computer. Advice?
Click to expand...
Click to collapse
I've had a similar problem as you with my flipside. Are you sure you're using the right key combination to get into rsd mode? If you can at the very least get it into bootloader mode by holding down the volume + key while holding the power button, I'm sure you can get it into rsd mode.
Kippyyy said:
Okay so I've downloaded RSD Lite, and I have the file. The problem is I cannot get my phone into bootloader mode or recovery mode so that it will stop the infinite bootloop to stay connected to my computer. Advice?
Click to expand...
Click to collapse
Theres a post here somewhere that has the combo of keys needed to get into bootloader mode. Sorry dont have it saved. Just do a search for it
Okay well I believe I found the thread you were talking about. It mentioned holding the up arrow on the keyboard combined with the power button for 4 seconds. Still nothing. I've tried the x button and power button, the volume up and power button. The thing is my screen won't work period. Nothing shows up but the backlight. So maybe I can or did get it to rsd or bootloader mode, but I can't really tell. I feel like something isn't right here. So I still can't connect it to my pc to use rsd lite.
Kippyyy said:
Okay well I believe I found the thread you were talking about. It mentioned holding the up arrow on the keyboard combined with the power button for 4 seconds. Still nothing. I've tried the x button and power button, the volume up and power button. The thing is my screen won't work period. Nothing shows up but the backlight. So maybe I can or did get it to rsd or bootloader mode, but I can't really tell. I feel like something isn't right here. So I still can't connect it to my pc to use rsd lite.
Click to expand...
Click to collapse
Did you by any chance have the stock launcher app frozen and using a different launcher? Just seems if you are seeing the backlight that possibly it is on the home screen but the launcher is corrupt? Not sure.
I'm not entirely sure. I assume it's stuck in the bootloop because when I power it on the backlight changes shades and then vibrates to signal the screen past the motorola M. Then I can touch the screen and feel a vibration to simulate to slide to unlock and if my usb cable is attached my computer makes the noise to signal it sees my device, but moments later my computer dings to signal device disconnected and my phone goes through the above process again.
I feel as if I can get to the factory reset screen and such because if I time it right I can stop it from doing anything mentioned above and it just hangs as if in a menu of some sort. The downfall is I see nothing and the backlight only appears.
I may just have to scrap it and say well done phone. I can't seem to find a similar issue anywhere on the internet. All the other issues can make the bootloader screen appear and that appears to be my number on problem.
I guess I was just being a complete idiot and thought I had removed my SD card when I didn't. Well now it can connect to my pc so I can flash it. I hope all goes well. I flash it then it should be back to factory settings right?
Kippyyy said:
I guess I was just being a complete idiot and thought I had removed my SD card when I didn't. Well now it can connect to my pc so I can flash it. I hope all goes well. I flash it then it should be back to factory settings right?
Click to expand...
Click to collapse
Yes like straight out the box. The backlight issue just seems to me like a launcher problem but that wouldn't explain why you can't get into bootloader mode. Hmmm strange. Here is another way I just thought of. If it connects to the computer (you said you hear the beep) reflash it via Motorola's site. All the instructions should be there (if they still support it)
Well I was able to flash it using RSD Lite. I could hear the start up tone and such (progress), but unfortunately my screen still won't show anything. I'm assuming the worst and maybe say hardware failure as to why the screen won't boot up? It randomly disappeared when it first went into bootloop and has never come back so that is why I assumed no working screen was a software issue.
Kippyyy said:
Well I was able to flash it using RSD Lite. I could hear the start up tone and such (progress), but unfortunately my screen still won't show anything. I'm assuming the worst and maybe say hardware failure as to why the screen won't boot up? It randomly disappeared when it first went into bootloop and has never come back so that is why I assumed no working screen was a software issue.
Click to expand...
Click to collapse
Yup that sounds like hardware failure. Haven't ever heard of the screen going out on the flipside but the atrix forums are full of them. Maybe you can get your upgrade early. Good luck