I know I have Few or no posts at all... but I am quite experienced with Android OS... I wish i could have contributed more to this forum before asking for help on such an INTRICATE problem.. Anyways
The rundown is this, in the sequence in which the things occured... Today i set my phone down, (Droid X, Rooted, Running Apex 1.4.1) and it was working perfectly fine. I then pick it up, absolutely nothing had been done to it between me setting it down and picking it up, and the hard buttons (Menu, Home, Back, Search, Volume Rockers, Camera Button) all not working, only the lock button on top. So, I think like I always do, Battery pull time. I preform a pull, and turn the phone back on, then it's stuck on "M", just stays there. I pull again, stuck again, nothing, one more time and it goes to stock recovery mode just the Android and Exclamation triangle, (I have clockworkmod installed) but of course, no hardbuttons are working so it's false hope. I press buttons over and over out of frustration and I bring up the menu, but that's all i can do, and i have to hold the Volume rocker down, and search to even do that, but besides that i can do nothing more. So I'm stuck at what I see as a dead end, can't move through recovery because buttons aren't working for whatever reason, so i can't flash SBF, or stock reset... So I'm asking for help, please.
wunsung said:
I know I have Few or no posts at all... but I am quite experienced with Android OS... I wish i could have contributed more to this forum before asking for help on such an INTRICATE problem.. Anyways
The rundown is this, in the sequence in which the things occured... Today i set my phone down, (Droid X, Rooted, Running Apex 1.4.1) and it was working perfectly fine. I then pick it up, absolutely nothing had been done to it between me setting it down and picking it up, and the hard buttons (Menu, Home, Back, Search, Volume Rockers, Camera Button) all not working, only the lock button on top. So, I think like I always do, Battery pull time. I preform a pull, and turn the phone back on, then it's stuck on "M", just stays there. I pull again, stuck again, nothing, one more time and it goes to stock recovery mode just the Android and Exclamation triangle, (I have clockworkmod installed) but of course, no hardbuttons are working so it's false hope. I press buttons over and over out of frustration and I bring up the menu, but that's all i can do, and i have to hold the Volume rocker down, and search to even do that, but besides that i can do nothing more. So I'm stuck at what I see as a dead end, can't move through recovery because buttons aren't working for whatever reason, so i can't flash SBF, or stock reset... So I'm asking for help, please.
Click to expand...
Click to collapse
have you tried getting it into bootloader mode?
hold vol - + camera + search while powering the device on
if you can get into bootloader mode than you can flash an sbf file
If you tried everything you can think of and still can't get it to do anything take it back to verizon. If you can't get it to work I doubt most of the employees at verizon would be able to get it to work either
Did you try a long battery pull. 30 seconds or more?
Sent from my Droid
Pull the battery and then.plug the phone into.the wall charger. Then put the battery back in, and when the phone boots up it should boot to clockwork
Sent from my DROIDX using XDA App
Did this work?
Related
help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.
Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.
i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons
I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!
did it work?
Hi. I have similar problem. Can anybody give instruction what can I do?
I have this problem too. Please help somebody
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me
i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will
No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse
AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...
on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?
I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..
did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)
I am having all sort of trouble with my newly flashed G1, the main issue being the keyboard only has 4 keys that work after a HBOOT flash back to stock..
It boots up to the google log in screen ok but in the bottom left corner it says 'safe mode'. I can find nothing in the G1 forums about it but one of the other forums (myTouch) mention it is where it loads a minimum amount of apps or something if booted while holding the menu button down.
Anyways, is there anyone who knows how to get out of safe mode? And why it might be in there in the first place?
figured it out. ( I searched xda using google )
hold the red and green buttons down together.
Some people say the menu button sticking causes this 'safe mode' to occur.
unfortunately my keyboard still only has 4 keys that work even without the safe mode issue.
edit: And upon rebooting its back in 'safe mode'. I would assume that means my menu button is stuck down? I wonder if that is why my keyboard is having issues too. I will have to tear it apart now.
hmmm yes good idea.. clean it all out than tell me what happens i will help you out from there
I think this safe mode isnt save at all...
One of the rep's told me to turn off the phone. Take out the battery for 20 sec. then reinstall and turn on. Should be out of safe mode.
As suggested, starting a new thread.
Hello,
Straight to the point, Rooted UK Atrix, running 2.3.4. no other MOD OR rom or anything, i like motoblur.
Stupidly Used Bloatfreezer to freeze 'home' without having another launcher to return to. Can't use the phone now. Trying to reset (hard or soft i do not know the difference) and the phone reads ''fastboot'' then i toggle down using volume - to android recovery and the phone is coming up with starting rsd protocol x2 and nothing else (using the power + & - methods).
If i leave my phone to just boot it resides on a white screen teasing me with noises of logging in but i cannot see anything.
I'm really lost to be honest, i have no idea what to do and i am not good with terminology either (adw, flashboots, cm7 i have no idea what they are).
I know there are sooo many threads with different answer's so that is why i am starting a new thread.
To factory reset using recovery...
1.Power off the phone, press and hold volume down button, press power button.
2.Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", press Vol up key
3.Wait for the "triangle ! / Android" screen then release the volume down button
*4.Tap on bottom right corner of the screen (may take a few times). a menu will come up
5.Tap on "wipe data/factory reset", and press OK. Another Confirmation screen will come. Press Yes and OK
6.After userdata is cleared, the "reboot system now" option will be highlighted by Default. Press OK.
7.Phone will reboot to initial setup MOTOBLUR screen.
NOTE/If on Android 2.3.4 then replace step #4 with pressing both Volume buttons at the same time. Also, use the Power button to activate the highlighted option instead of looking for the OK.
Sent from Rob's Atrix
atrixuk said:
As suggested, starting a new thread.
Hello,
Straight to the point, Rooted UK Atrix, running 2.3.4. no other MOD OR rom or anything, i like motoblur.
Stupidly Used Bloatfreezer to freeze 'home' without having another launcher to return to. Can't use the phone now. Trying to reset (hard or soft i do not know the difference) and the phone reads ''fastboot'' then i toggle down using volume - to android recovery and the phone is coming up with starting rsd protocol x2 and nothing else (using the power + & - methods).
If i leave my phone to just boot it resides on a white screen teasing me with noises of logging in but i cannot see anything.
I'm really lost to be honest, i have no idea what to do and i am not good with terminology either (adw, flashboots, cm7 i have no idea what they are).
I know there are sooo many threads with different answer's so that is why i am starting a new thread.
Click to expand...
Click to collapse
Can you get to android market via your computer? If so go to it, log in, find a launcher and install to your phone. Once rebooted to the phone, it *should* give you a choice or just automatically choose the new launcher. What does double tapping your home button bring you too? I was able to find my alternative launcher by moving around via that.
sounds like ya have frozen system files
prolly be easyest to unlock bootloader and push a custom rom to it (they work better than stock anyway
Yes i did freeze the home app.
I really mean thanks to those replied. Unfortunately i have tried the first suggestion but it doesn't let me get to step 3 with the triangle, fast boot - android recovery - can't fast boot 2 etc can't get passed that.
i have just plugged it in the Laptop, taking sim out, and it has started! i thought it was broken!! but unfortunately not 'home' yet...
SO it is at the motoblur login screen, should i log in? press factory reset? Any suggestions?
I'm not sure how to push an app straight to phone so i can install a launcher...
we're nearly there guys!
In addition to what Robkort said a few posts up ^^^ to get into the recovery on 2.3.4 you may have to scroll down once you see fastboot, until you see "Android Recovery" and press vol up - when the android dude comes up, if tapping the bottom right corner doesnt get you into recovery, press BOTH volume buttons at the same time.
It is now up and working with me just simply plugging it in, running moto sync, logging in to market from laptop and sending the launcher app..
Wifi was enabled luckily before i froze home, so when i pressed log in it went 'error' then launcher pro just popped up so now i think i just unfreeze home, turn it off, put my sim in and fingers crossed..
wish me luck!
Yahooooooooooooooooooooooooooooooooooooooooooooooooooooooooo!
It's worrying how much happier i am now that i am back on top with my phone working. Pretty dependant we become!
All my widgets, and motoblur have gone, and some writing is in a different language :/ universal inbox is not there either.
Still Thanks for all the suggestions!
I suggest this thread should be 'FROZEN' or just stay open if anyone ever freezes 'home' without having another launcher installed.
I'm glad i didn't need to flash anything, put other ROMS on, hard reset losing everything, solved pretty simple luckily.
Hi My boss has a droid x and it stopped booting. He already got his replacement but he did not back his info up to google so he lost everything. The phone is completely stock. He said that first it gave him the black screen with the yellow triangle and the android then it would not boot. I know the software is partially working because when I plugged it in to the charger the battery animation comes up. When I plugged it into the pc I tried different button combos because I do not know how to get into recovery mode. So I think when I hit vol up and power I got a screen that said bootloader and power low and cannot configure software or something like that. Oh the screen was black and the letters were white. I am not familiar with this phone or motorolla in general I have and lg and a Samsung and both have unlocked bootloaders. So is there a way to get his info off this phone? The only thing I can think of is to some how install CWM and then mount the internal sdcard but I don't know how to do that with a locked bootloader. So if anyone knows anything please let me know.
Thank you,
Charlie
The black screen with the yellow triangle just means your in recovery mode. If it still goes to that when you turn it on just press both volume buttons and it will give you options. There's an option to reboot and you can factory reset. But I don't know if you can get the data.
Also to get into recovery just press home and power and when you see the m for Motorola release power and keep home held.
Sent from my DROIDX using Tapatalk 2
I woke up this morning and my phone will not boot. It automatically boots into the bootloader (hboot) and the up/down (volume keys) wont move the cursor to allow me to get to the recovery option. Also if I try to boot into recovery using the hard button combo it vibrates 3 times and the led turns to green, then it just sits/never gets to recovery. Since hboot is looking for the PDimg file I figure I could use this file to revert to stock but I was hoping someone here might have a better answer.
If not can someone let me know how to go about flashing with a PD15img file and where I can find a copy?
Thanks guys
Sounds like your volume button is stuck
Sent from my HTC Glacier using xda premium
Nope because it knows when I'm using them to try to go straight to recovery also the power button cannot be used to select either but it works to turn the phone one. They just stop working in hboot.
A constantly pressed button will of course also react when you're trying to boot directly to recovery. The phone doesn't "know" anything.
Another option is a stuck trackpad.
If all else fails you might try to reflash recovery and or Hboot, it never hurts to try from a clean install.
Nic
Jack_R1 said:
A constantly pressed button will of course also react when you're trying to boot directly to recovery. The phone doesn't "know" anything.
Another option is a stuck trackpad.
Click to expand...
Click to collapse
I think you guys are misunderstanding the point. This has nothing to do with the buttons. My issue is when I turn my phone on (by hitting the power button once) the phone will only boot into hboot. Once in hboot none of the keys (power or volume) work. If I try to boot directly into recovery by holding vol up/down + power; the phone will viberate 3 times and the LED lights up green. It then just sits on a blacklit black screen and does nothing else.
I am looking for eirther; Anyone that has ever had this issue and may be able to shed some light onto why it happened. Which by the way was completly random, I shut the phone off before going to sleep and woke up too it viberating like crazy then when I tried to turn it back on; this is what happened.
Or the answer to this question; How do I install a rom from hboot? Can I just install any rom as a "update" by using the method of naming it PD15IMG? Since it does search for this file when I have a sd card in at boot. But if my memory serves me correct it will ask; "Would you like to install this update?" and if my hard buttons do not work and I cannot click yes than what else can I do?
Thanks for all the help guys!!!!
- M
And I think you can't read. You've been told in 3 posts that the phone boots directly to HBOOT because EITHER A VOLUME DOWN BUTTON OR A TRACKPAD BUTTON IS STUCK, ON ELECTRICAL LEVEL - THE CONTACTS ARE ALWAYS CLOSED. And THERE'S NOTHING YOU CAN DO ABOUT IT ON SOFTWARE/FLASHING LEVEL. You need to fix what's broken, and you've been told what's broken. Patience isn't one of my skills. Good luck from here.
Jack_R1 said:
And I think you can't read. You've been told in 3 posts that the phone boots directly to HBOOT because EITHER A VOLUME DOWN BUTTON OR A TRACKPAD BUTTON IS STUCK, ON ELECTRICAL LEVEL - THE CONTACTS ARE ALWAYS CLOSED. And THERE'S NOTHING YOU CAN DO ABOUT IT ON SOFTWARE/FLASHING LEVEL. You need to fix what's broken, and you've been told what's broken. Patience isn't one of my skills. Good luck from here.
Click to expand...
Click to collapse
I do thank you for your help but you may want to aquire some patience if you plan to continue helping people... since people in need of help are most likely confused.
Thanks though :highfive:
Im my experience Jack_R1's answers are always right and are the answer to your question. If you think otherwise one of two things is happening.
1) You did not explain your problem thoroughly.
2) You need to examine his post(s) more closely.
He has zero tolerance for stupidity or ignorance due to laziness (i.e. not searching). I'm not trying to speak for him or defend him or anything else. He's grown and quite capable of handling all that. The man just knows the answer and gets to the damn point.
I wish we had more people around here like him.