[Q] HTC Touch 3g is dead - Touch 3G General

Hi, I am Gurmit and I am new to this. I have Touch 3G which is not responding to any button and neither the LED glows when I connect it with charger.
It was working fine until one day when it got stuck (Hang) when I received call. Then I tried to restart it but unfortunately I was unable to do it. Till now it is still not responding and I would like to get it repaired. I dont trust the Local guys for this.
Please can some one help me knowing what the problem is and how can this be fixed.
Thanks and Regards,
Gurmit Chadda

Hi can you put im on spl mode the screen with many colours if i remember is
power + volume down , get vol. down and then power.
ps: get the cards out sd and sim

Related

Unable to wake with power button

hey guys,
it started a few weeks ago and has starting happening more and more.
Every now and again when i go to wake my phone by pressing the power button nothing happens and I have to restart teh device. Somethimes after restarting the phone will go back to sleep and it happens again!!
Has anyone else got this problem??
Anyone got any ideas how i can fix it??
I've tried 3 different ROM's and always hard re-set after installing but I'm still getting this problem.
Please help!!!
Thanks in advance
My power button broke about four months ago, so now I have to resort to pulling the stylus out to turn the screen on. Might work as a quick fix for you until you figure it out.
Does anyone know if the on button is a known problem with the HD? Mines caput COMPLETELY now, I can get another one on insurance but this will be the second (headphone socket first time,) HD I've had in 12 months. OR... Anyone know if I can blag Orange into giving me a HD 2 or something more compatible with a mac? (Just inquiring, bought a mac after the HD ya see )
Same problem here, defect power button. I Switch on my device by pulling the stylus and switch it of by pressig the power button very hard (which still works most of the times). I will send it for warranty repair and report what happens.
hit007

HTC MAGIC BRICK...help me plz!

hi guys, some days ago i tried to change rom on my htc magic...it wasn't my first time so when i was to upadate new ratio my mobile stopped to live :/ right now it's turn off and when i try to turn on it doesn't work.
only light i see it's when i recharge my mobile but if i try to push on power key the red light(recharging) stopping to works.
any idea? it's something i can do on it?
plz anyone can help me?
I have the same problem,the only thing you can do is to send it back to HTC so that they can repaire it. I´ve flashed a wrong SPL.
If you can´t go into recovery(press Home and On Button same time),or into fastboot(press Volume down and On Button same time),i think your phone is bricked.
tnx for your answer...it's very strange to see red light goes off when i push home+ power or volume down + power.
well i think i have to send it back to htc :/
Thats the same problem that i have. I send it back and sayed thats happening while i charging the phone. I have guarantie and after three weeks i got it back.

My Acer NeoTouch s200 is dead

Hi im from Germany,
i tried to flash my Acer S200 but it stopped by 50% and i have pluged the cable out. I cant turn it on, it gives no signal, i cant bring it to the download mode. Nothing is working no hardreset with buttons.Nothing is working and when i plug it to usb the LED isnt blinking
Sorry for my bad english ..
my phone is new, it has garanty, should i contact the acer support or can anyone help me ?
Hold volume up/vol down button + reset until you see "clean boot"
i tried it the phone gives no signal .. no clean boot is coming .. the rom flashing was at 50% i think it is breaked
but thank you
did you try removing then replacing the battery. then try bootloader mode again?
yes i tried but nothing is working i cant enter the bootloader nothing is working it is just off no vibration nothin is working
sorry, but I have to ask, are pressing then holding vol down +power +camera buttons
at the same time until blinking red light starts?
you have to get into bootloader mode then flash a custom rom
brainmaster has a few including a "clean" rom.
I had this happen awhile ago and tried so many things for 2 days that now I don't
remember what actually worked! But I don't think that your S200 is bricked.
Also, make sure that you keep the power cable pluuged in (not usb)
you need a good charge even if you don't see the green light.
just keep trying and if I can remember I let you know.
or someone here will help you to find a solution!
thank you for your help but there is no light blinking. Also when i plug it to charge no light is going on. it doesnt charge the battery. i hope you can remember
i already know how to flash a rom but the phone doesnt give any sign
sorry I can't remember but you should ask brainmaster and maybe he can really help.
And he speaks german= )
thank you i will send him my problem
Any solution
Hi. I kind of found myself in the same situation. My acer s200 is unresponsive, no blinking lights no matter key/reset combinations. Had been in the middle of flashing on a new ROM when it got accidentally disconnected.
Any possible solution? Already checked the battery out in a different phone and it's fine and charged.
Hey,
i don't want to looks like a vultur, but if some of you can't find a solution to resolve the problem you have, I'm interested by the device because I need some piece. Of course I hope you can resolve your problem but if there are no led blinking, the last possibility is to send it to acer, and if you don't want to wait/pay/or whatever to with the acer support, I'm interested by your device.
Arto
Vulture indeed!! I'm need of help man.
you still need help?????
Hey GarcoG. Yes, still in need of help. My S200 is currently a desktop paperweight at home. It's a beautiful paperweight but it was made for so much more. Would really like to get it up and running again.
A new thing I noticed. I'm able to charge my phone's battery to full on my friend's s200. Of course when I put it back into my phone, it's still completely unresposive. However, I noticed that whenever I put it back into my friend's phone, the charge on it has reduced. I'm pretty sure it's not a battery issue I have since my phone is still unresponsive with my friend's battery in it and the same happens with that battery as well.
Would really appreciate any ideas on fixing this.
Hi, count me in. I just jumped on your wagon.. will try to disassemble this beauty soon before I officially demote it to a shiny paperweight.. well it's not that shiny, i put on a matte screen protector on it
Really funny about that matte screen protector. Cannot wait for the results. In my case, phone got accidentally connected just as it had reached the stage of flashing on the new ROM. Was thinking it was probably unresponsive because the ROM instructions that enable it respond to key combinations are absent hence cant get it into Bootloader mode.
@ incognito_tkd: Any luck with the disassembly? Would like to know your findings.
I have same problem... same situation
But... when I connect my USB charger, it shows red LED on... as if the charging is ON. But no reaction
Any one help please
there is no possibility to repair the phone... you have to send it to acer !!
i got my phone 1month after i´ve send it

[Q] HD2 bricked - wont stop vibrating

Hey,
I was updating my HD2 (Tmobile, R 2.10.50.26), via the official tmobile update software when it got stuck at 48%, I restarted and got stuck at 8% again, after several attempts my phone just wont turn on, when I hit the power button it starts vibrating like crazy (nothing on screen) and it wont stop until I remove the battery,
I cant do a hard reset (volume up+volume down+power button), because as soon as I press the power button it stars vibrating,
Also, as soon as I plug it to the wall charger or PC it also starts vibrating,
Any suggestions?
Thanks!
Do this when you press the power button to power on also hold the volume down button down and see if the multicolor bootloader screen comes up. If it does connect your HD2 via USB cable and wait for Serial in the white bar of bootloader to change to USB and ghen run the update again. You can also try it via SD card if you like and if you can get the bootloader to come up. You will have to rename the .exe to .zip to gain access to the .nbh file. here iz a link to the thread on flashing via SD card.
http://forum.xda-developers.com/showthread.php?t=681317
T-Macgnolia said:
Do this when you press the power button to power on also hold the volume down button down and see if the multicolor bootloader screen comes up. If it does connect your HD2 via USB cable and wait for Serial in the white bar of bootloader to change to USB and ghen run the update again. You can also try it via SD card if you like and if you can get the bootloader to come up. You will have to rename the .exe to .zip to gain access to the .nbh file. here iz a link to the thread on flashing via SD card.
http://forum.xda-developers.com/showthread.php?t=681317
Click to expand...
Click to collapse
No luck cuz as soon as I press the power button it starts vibrating,
I cant get the multicolor bootloader screen to come up
.. now as soon as I attach the battery (no buttons pressed) it starts vibrating, my PC wont recognize it and it will not charge..
everything was working fine before this
bizkdigy said:
No luck cuz as soon as I press the power button it starts vibrating,
I cant get the multicolor bootloader screen to come up
.. now as soon as I attach the battery (no buttons pressed) it starts vibrating, my PC wont recognize it and it will not charge..
everything was working fine before this
Click to expand...
Click to collapse
Seeing as you were flashing the official update from the T-Mobile site I assume you have a T-Mobile Leo with 1024MB ram just like mine and that you are a T-Mobile customer. If you are still under warranty with T-Mobile you should not have any troubles out of T-Mobile sending you another replacement HD2. Just contact T-Mobile customer service. I honestly have no idea what happen unless the ROM got stuck flashing for some reason and you should have just waited the flash out instead of pulling the battery cause my friend you now have a bricked HD2. But you are one of the few people that really is not at fault for your HD2 being bricked cause you were using official software meant for your HD2. Unless like I said you do not have a T-Mobile Leo but a EU or another model. Does your HD2 have T-Mobile in silver at the top of the front and is your send button green and end button red?
T-Macgnolia said:
Seeing as you were flashing the official update from the T-Mobile site I assume you have a T-Mobile Leo with 1024MB ram just like mine and that you are a T-Mobile customer. If you are still under warranty with T-Mobile you should not have any troubles out of T-Mobile sending you another replacement HD2. Just contact T-Mobile customer service. I honestly have no idea what happen unless the ROM got stuck flashing for some reason and you should have just waited the flash out instead of pulling the battery cause my friend you now have a bricked HD2. But you are one of the few people that really is not at fault for your HD2 being bricked cause you were using official software meant for your HD2. Unless like I said you do not have a T-Mobile Leo but a EU or another model. Does your HD2 have T-Mobile in silver at the top of the front and is your send button green and end button red?
Click to expand...
Click to collapse
Yes, my HD2 is the T-Mobile US 1024MB, 100% sure about that. Im not a tmobile customer since im not in the US,
Well, I think I might sell it for parts..
many thanks for you time!
bizkdigy said:
Yes, my HD2 is the T-Mobile US 1024MB, 100% sure about that. Im not a tmobile customer since im not in the US,
Well, I think I might sell it for parts..
many thanks for you time!
Click to expand...
Click to collapse
You can still fix your HD2 but it will require the use of a JTAG and a RIFFBOX or the replacement of the intior main board. PM me if you want more info in it as I am not at home with my computer right now and it is alittle harder to post links with my HD2.

Help! Cannot unlock screen, touch function not working.

Has anyone of you guys encountered the same issue with your HTC HD2? Care to share the fix you did? Would this mean bye-bye to my HD2 already?
jutsstuj said:
Has anyone of you guys encountered the same issue with your HTC HD2? Care to share the fix you did? Would this mean bye-bye to my HD2 already?
Click to expand...
Click to collapse
If a clean install (task 29) doesn't help, then I guess you have no other option than sending it for reparation.
It seems like there is a limited life span on the touchscreen. Mine died in October, and I had to buy a replacement because nothing I did fixed the problem.
I had the same issue as you, but in my example touchscreen is slowly dying. For example I can't wake up the phone pressing right (red) button. So I learned that using any other button will not cause freeze of screen. I also discovered that if you gently slap your phone on hand, magically screen starts responding. Weird, but it's ‘working’ like this since 5 months so far.
I just encountered this problem with my HD2 as well. It seems that this is a fairly common issue. Apparently the digitizer for the touchscreen is located directly beneath the red power button and has a tendency to lose its connection.
For me, holding the red power button down with some force for about 5 seconds fixed the issue. Is this temporary? Perhaps, but it has worked just fine for a few days now. Try that out.
Can't Unlock the Phone..
I am having the same problem..I can't unlock the phone..No matter what android Rom I installed.I tried to removed the lock screen and the touch stopped working..But when the phone restarts and you put you pin etc,I can use the phone normally..but when it goes black and trying to turn it on again nothing works on the screen..
Though the hard buttom works..Home screen etc..but can't get the touch to work after the screen goes black!
It's not rom related
I have installed WM6.5 (Stock), Android GB, Android ICS, Android JB But the problem appears to be the same in all
when I press Red button touch doesn't work any more
I would go with digitizer theory
BUT my question is this:
is it gonna get worse? cause for now as long as i avoid Red button everything is OK :good:
and I love my HD2 but if getting worse is possible I have to get rid of it :crying:
Well i had the same problem.now my phone has been to the service centre for reparing
Sent from my LG P350 using xda premium
P.S. my HD2 got a dead touchscreen.so using this this till the HTC guys fix it
Anurag pandey said:
Well i had the same problem.now my phone has been to the service centre for reparing
Sent from my LG P350 using xda premium
P.S. my HD2 got a dead touchscreen.so using this this till the HTC guys fix it
Click to expand...
Click to collapse
Funny (or sad) thing is we don't have an official service center here
so only option is to replace it or sell it as the way it is
Try this:
Lock the screen normally, screen turns off. (Power button)
To turn it on again by pressing any other screen buttons other than the power button. (DONT USE THE POWER BUTTON TO DO THIS)
I found that if I do it this way, the screen runs normal.

Categories

Resources