[Q] HD2 bricked - wont stop vibrating - HD2 General

Hey,
I was updating my HD2 (Tmobile, R 2.10.50.26), via the official tmobile update software when it got stuck at 48%, I restarted and got stuck at 8% again, after several attempts my phone just wont turn on, when I hit the power button it starts vibrating like crazy (nothing on screen) and it wont stop until I remove the battery,
I cant do a hard reset (volume up+volume down+power button), because as soon as I press the power button it stars vibrating,
Also, as soon as I plug it to the wall charger or PC it also starts vibrating,
Any suggestions?
Thanks!

Do this when you press the power button to power on also hold the volume down button down and see if the multicolor bootloader screen comes up. If it does connect your HD2 via USB cable and wait for Serial in the white bar of bootloader to change to USB and ghen run the update again. You can also try it via SD card if you like and if you can get the bootloader to come up. You will have to rename the .exe to .zip to gain access to the .nbh file. here iz a link to the thread on flashing via SD card.
http://forum.xda-developers.com/showthread.php?t=681317

T-Macgnolia said:
Do this when you press the power button to power on also hold the volume down button down and see if the multicolor bootloader screen comes up. If it does connect your HD2 via USB cable and wait for Serial in the white bar of bootloader to change to USB and ghen run the update again. You can also try it via SD card if you like and if you can get the bootloader to come up. You will have to rename the .exe to .zip to gain access to the .nbh file. here iz a link to the thread on flashing via SD card.
http://forum.xda-developers.com/showthread.php?t=681317
Click to expand...
Click to collapse
No luck cuz as soon as I press the power button it starts vibrating,
I cant get the multicolor bootloader screen to come up
.. now as soon as I attach the battery (no buttons pressed) it starts vibrating, my PC wont recognize it and it will not charge..
everything was working fine before this

bizkdigy said:
No luck cuz as soon as I press the power button it starts vibrating,
I cant get the multicolor bootloader screen to come up
.. now as soon as I attach the battery (no buttons pressed) it starts vibrating, my PC wont recognize it and it will not charge..
everything was working fine before this
Click to expand...
Click to collapse
Seeing as you were flashing the official update from the T-Mobile site I assume you have a T-Mobile Leo with 1024MB ram just like mine and that you are a T-Mobile customer. If you are still under warranty with T-Mobile you should not have any troubles out of T-Mobile sending you another replacement HD2. Just contact T-Mobile customer service. I honestly have no idea what happen unless the ROM got stuck flashing for some reason and you should have just waited the flash out instead of pulling the battery cause my friend you now have a bricked HD2. But you are one of the few people that really is not at fault for your HD2 being bricked cause you were using official software meant for your HD2. Unless like I said you do not have a T-Mobile Leo but a EU or another model. Does your HD2 have T-Mobile in silver at the top of the front and is your send button green and end button red?

T-Macgnolia said:
Seeing as you were flashing the official update from the T-Mobile site I assume you have a T-Mobile Leo with 1024MB ram just like mine and that you are a T-Mobile customer. If you are still under warranty with T-Mobile you should not have any troubles out of T-Mobile sending you another replacement HD2. Just contact T-Mobile customer service. I honestly have no idea what happen unless the ROM got stuck flashing for some reason and you should have just waited the flash out instead of pulling the battery cause my friend you now have a bricked HD2. But you are one of the few people that really is not at fault for your HD2 being bricked cause you were using official software meant for your HD2. Unless like I said you do not have a T-Mobile Leo but a EU or another model. Does your HD2 have T-Mobile in silver at the top of the front and is your send button green and end button red?
Click to expand...
Click to collapse
Yes, my HD2 is the T-Mobile US 1024MB, 100% sure about that. Im not a tmobile customer since im not in the US,
Well, I think I might sell it for parts..
many thanks for you time!

bizkdigy said:
Yes, my HD2 is the T-Mobile US 1024MB, 100% sure about that. Im not a tmobile customer since im not in the US,
Well, I think I might sell it for parts..
many thanks for you time!
Click to expand...
Click to collapse
You can still fix your HD2 but it will require the use of a JTAG and a RIFFBOX or the replacement of the intior main board. PM me if you want more info in it as I am not at home with my computer right now and it is alittle harder to post links with my HD2.

Related

Helppppp HD2 Well not boot up anymore

Hey,
I had my HD 2 for 2 days now.
It just crash on me for the first time soft rest the unit now it well not boot up anymore stuck in the HTC with white background screen and the rom version at the left bottom side.
Tried removing battery nothing still stuck.
I tried to hard rest the pda but cannot get it to hard rest.
Can someone explain how to hard rest what do you have to do hold the volume key up or down and switch the unit on tried it but nothing.
Please any help.
Thanks
Gigino
Have a look here (point 15) on howto do the reset(s)
http://forum.xda-developers.com/showthread.php?t=583638
Good luck..
Same as Gigino, my HD2 is only giving me white HTC screen. I haven't even had it long enough to connect it to my pc. No messing around. It locked up about 5 times in the 5 days I have had it. Each lock up was only resolved with the battery removal. Curiously no lockups until I set an alarm.
The difference between my issue and Gigino is that I do not have the rom version showing up at reboot, just the white screen. Hardware issue, or software?
Followed the Hard Reset procedure as outlined by HTC and your link above. The reset commands are recognized, but after reload, back to white HTC screen.
Bricked?
If you cant get functionality back by taking the battery out or by soft or hard resetting then theres not much more you can do. You could try taking the battery out and giving it a full charge with the mains charger provided but I dont think that will do much good.
As long as you havent flashed a new rom with the goldcard then call your service provider. If you got a sim free phone then call the place where you bought it as its covered by warantee. You should be able to get it replaced if theres a fault.
the same thing happened to me after 2 weeks with phone, I'd had no problems with the phone then one morning while using opera it froze. I had to remove the battery to try and reboot the phone but it wouldn't boot past the htc screen. eventually after removing the battery several times the phone wouldn't even turn on, also the phone got very hot with the battery in. I called htc and told them and they picked up it for repair. it looks like they couldn't fix it cos they sent me a replacement phone. they returned the phone to me within a week.
HTC White Screen of Death
Thanks, guess I feel a bit better knowing it wasn't anything I did..and that I am not alone in this world of WSOD
I have contacted the seller and haven't heard back yet. I don't imagine it will be a problem. Perhaps above and beyond the alarm clock/freezing thread a WSOD thread is in order until it is determined if they are related.
Thanks all.
GR8
Update;
I pulled battery and replaced so device is off. Charged over night and the orange power charging light didn't go off or go green by morning. device was hot.
Get this though, when I pull the phone off the charger the orange light doesn't go out!. Now the phone won't turn on either. Had to pull battery again to make orange light go out and when it powered back up, back to HTC whit screen.
gigino said:
Hey,
I had my HD 2 for 2 days now.
It just crash on me for the first time soft rest the unit now it well not boot up anymore stuck in the HTC with white background screen and the rom version at the left bottom side.
Tried removing battery nothing still stuck.
I tried to hard rest the pda but cannot get it to hard rest.
Can someone explain how to hard rest what do you have to do hold the volume key up or down and switch the unit on tried it but nothing.
Please any help.
Thanks
Gigino
Click to expand...
Click to collapse
I don't know what is the cause.
But it is really pissing me off.
The only solution out is to do a "hard" reset by holding volume up and down TOGETHER while doing that .... press the power on button for about 1 second ... then ONLY let go the "power on" button which still hold volume up and down.
You should see the screen to restore to factory default .... and proceed to do so.
I have encounter quite a number of times but after trying various "solution" ... it still happens.
By the way, I am using cooked ROM (which I don't think is the problem).
palmerj100 said:
the same thing happened to me after 2 weeks with phone, I'd had no problems with the phone then one morning while using opera it froze. I had to remove the battery to try and reboot the phone but it wouldn't boot past the htc screen. eventually after removing the battery several times the phone wouldn't even turn on, also the phone got very hot with the battery in. I called htc and told them and they picked up it for repair. it looks like they couldn't fix it cos they sent me a replacement phone. they returned the phone to me within a week.
Click to expand...
Click to collapse
I encounter similar situation .... was installing the new taskbar .... then it took very long ..... so while the installation in progress thingy is still in the middle .... I did a soft reset ... then it start up till the white screen and stock there and showing the ROM version etc at the bottom left.
So have to do a Restore to Factory Default to get it up and running again.
Seems there is something really wrong with this model.
I have it for two months now and lots of issues.
Now it is with HTC for repair as I also have the white screen with green HTC issue.
Nothing helped Hard Reset nor flashing rom.
I can't wait to get it back ;-)
Tons of issues with this phone, but my love for it is just a bit bigger than the hate.
hello all gettin frustrated here too bout a week ago my brick started and stopped on std rom reflashed duttys 1.3 and new radio.was fine for a few days then it seemed to crash and hard reset by itself.now i have a crash every day which inccurs a hard reset very annoying........gets stuck at boot screen as does every ones.now if you if your like me and have HSPL,cooked rom and upgraded radio.....sorry htc....and are sending it back for repair,you should still be able to activate bootloader mode and reflash std rom/radio.if its like mine after flashin it might behave as normal again untill next crash.so.........
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear
3.connect it to your pc it should install drivers.the screen should now say "USB"
4.reflash with std rom/radio (should be located here http://forum.xda-developers.com/showthread.php?t=577717 and http://forum.xda-developers.com/showthread.php?t=611787 and bingo HTC are none the wiser and it may restart again if it does dont trust it!!!!!!!!
i think i read somwhere that a shipped rom will remove HSPL but you might want to clarify that with a senior member here.
camo.b said:
hello all gettin frustrated here too bout a week ago my brick started and stopped on std rom reflashed duttys 1.3 and new radio.was fine for a few days then it seemed to crash and hard reset by itself.now i have a crash every day which inccurs a hard reset very annoying........gets stuck at boot screen as does every ones.now if you if your like me and have HSPL,cooked rom and upgraded radio.....sorry htc....and are sending it back for repair,you should still be able to activate bootloader mode and reflash std rom/radio.if its like mine after flashin it might behave as normal again untill next crash.so.........
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear
3.connect it to your pc it should install drivers.the screen should now say "USB"
4.reflash with std rom/radio (should be located here http://forum.xda-developers.com/showthread.php?t=577717 and http://forum.xda-developers.com/showthread.php?t=611787 and bingo HTC are none the wiser and it may restart again if it does dont trust it!!!!!!!!
i think i read somwhere that a shipped rom will remove HSPL but you might want to clarify that with a senior member here.
Click to expand...
Click to collapse
If you flash a shipped rom via activesync as you described then the HardSPL will be left intact and HTC will be the wiser and will invalidate your warranty.
The only way to remove the HardSPL is to flash a shipped rom via microSD Card which will flash the shipped rom, radio and spl back and will leave you with a stock device.
White screen with HTC logo is a hardware defect
I also have the issue with not booting HD2 after less than a month of use . It shows white screen and green HTC logo but without the red digits in the bottom part of the screen. And one more strange behavior to mention - when phone is switched off and I connect it to the charger it starts itself after 30sec approximately.
What is inside:
Original SPL with an original ROM but for different region than the one which originally was inside. I flashed it by SSPL (without using HSPL).Only ROM was flashed without radio as radio was the same.
What checks were done:
1)Soft reset
2)Removing of battery
3)Hard reset several times
4)Flashing back with the original ROM through ActiveSinc and cable from computer. As the original SPL is intact this should return it to the factory condition. After flashing I did 2 hard resets. But no change - still showing white screen on boot up.
Finally I gave it to the repair workshop. They confirmed that this is a hardware problem and sent it for repair in authorized HTC service.
Suggest that this is a problem with a bad soldered chip (integrated circuit) during manufacturing of the PCB. In this case the power controller chip is suspected. The contact pad of the chip and solder are touching each other and phone works. With the time passing the contact surface oxidate and contact is lost. So initially the phone will work but reset itself occasionally while the contact is instable and will stop fully to operate when the contact is completely lost. Only replacement of defective PCB can rectify this problem. Trials to re-solder the chip are usually not successful. This is purely manufacturing defect. However sometimes it may happen if you drop down your phone.
i had same problem, it was stuck on first white screen with some version numbers in red in bottom left.
I did a hard reset and it got fixed.
i had not installed anything or flashed anything. it just got stuch at that screen 1 fine day for no reason
mskip said:
If you flash a shipped rom via activesync as you described then the HardSPL will be left intact and HTC will be the wiser and will invalidate your warranty.
The only way to remove the HardSPL is to flash a shipped rom via microSD Card which will flash the shipped rom, radio and spl back and will leave you with a stock device.
Click to expand...
Click to collapse
I have the same problem my htc hd2 freezes at the white screen.
I have tried to do a hard reset but i have not the time to put the usb cable in at the red green white screen.
Is it possible to resolve this problem or must I send my phone to HTC.
Thanks.
Hermanb
WSOD FIX
To all the people having WSOD issues, check your microSD cards. I had this issue while ago with the white HTC screen and NO RED TEXT and I norrowed the problem down to my microSD card. When taking it out of the HD2, it would boot up fine. So I plugged my card into a USB adapter on my PC, formatted it and then put it back into the HTC. Everything worked fine.
EDIT: My HD2 is a T8585 and is unbranded bought from UK. I have always been using the stock 1.66 WWE ROM
I have exactly the same prob as camo.b, and right now I`m formatting my SD card, hoping that I'll be able to at least restore the SPL so that the warranty will still be available. I'm bringing it in tomorrow, if everything turns out to be fine with my SPL...
AinsCrowbar said:
To all the people having WSOD issues, check your microSD cards. I had this issue while ago with the white HTC screen and NO RED TEXT and I norrowed the problem down to my microSD card. When taking it out of the HD2, it would boot up fine. So I plugged my card into a USB adapter on my PC, formatted it and then put it back into the HTC. Everything worked fine.
Click to expand...
Click to collapse
Stil have the same problem even with the Sd card out,
hermanb2004 said:
Stil have the same problem even with the Sd card out,
Click to expand...
Click to collapse
My HD2 will not let me flash anything, even though I can get into the bootloader screen. Right now it's semi-bricked, and I have tried flashing a stock ROM via both usb and sd card, I have tried using task29, I have even tried uninstalling HSPL, but nothing works. Everything fails, either at the beginning, at the middle or at the end of the operation.
I flashed it with a shipped rom and he works,
I was unable to do a hard reset with any card still in the device. be sure both sim and sd card are removed, then reinstall battery and follow vol up/down etc. procedures. good luck.

Another thread of "My G1 won't start"

hello all, i need help again this time.
let's get to the point.
this morning, i tried to charge my G1 because the battery has yellow color.
when i charged the phone, after around 5 minutes, suddenly my G1 restart itself and then after the "G1" logo, the screen go all black, sometimes not all black but there's a little glitch (white-green-purple-all little colors.)
the phone got heated on the bottom part everytime i power-on it, even just on battery (not charged).
i tried "Camera + Power", it's only getting to that red-blue-green-white screen that shows :
"DREA100 PVT 32B
HBOOT - 0.95.0000
CPLD-4
Radio-2.22.23.02
Sep 2 2008
Serial0"
Click to expand...
Click to collapse
and it stops there for AGES . won't do anything.
i tried "Home + Power", i tried to hold down that two buttons for 25 second more, but it keeps normal boot, shows G1 logo, and then black screen again.
i tried "Menu + Power", it just the same as "Home + Power"
my G1 has never been rooted, it's all original, i haven't done any system upgrading-downgrading things.
the charger is the original one, original from htc
the battery is new, i've just changed it one month ago.
that's all the informations that i can give.
so, anyone can help me solving this problem?
if its not rooted or anything than that means its HTC's fault not yours. and since you cant access the recovery menu to flash a new rom or recover a nandroid backup, it sounds like you're up ****s creek with a turd for a paddle.... unless somebody has developed a way of flashing without recovery. in other words; get a new phone or send it in to t-mobile.
Get an SD card reader an put a DREIMG.nbh on your sdcard to downgrade to RC29 (push power+camera, select confirm), then wait for the OTA to push you to DMD64. You will loose all your data but at least your phone will work.
Alternatively, after downgrading to RC29 you can exploit the bluetooth bug to gain root access, and after that install CM5.0.8 and be twice as happy with you chunky old G1.
mejorguille said:
Get an SD card reader an put a DREIMG.nbh on your sdcard to downgrade to RC29 (push power+camera, select confirm), then wait for the OTA to push you to DMD64. You will loose all your data but at least your phone will work.
Alternatively, after downgrading to RC29 you can exploit the bluetooth bug to gain root access, and after that install CM5.0.8 and be twice as happy with you chunky old G1.
Click to expand...
Click to collapse
okay, i think i'll try this one.
just another information, i've tried another combination of buttons, such as hold down together "Call + Menu + Power" and then slide quickly to Home button, but it's giving no effect too
dioadi said:
okay, i think i'll try this one.
just another information, i've tried another combination of buttons, such as hold down together "Call + Menu + Power" and then slide quickly to Home button, but it's giving no effect too
Click to expand...
Click to collapse
Call+Menu+Power is for a reboot while the phone is on lol. Only other way is "blue light mode" which is trackball and power, but I don't feel like explaining it to you=p.
mejorguille said:
Call+Menu+Power is for a reboot while the phone is on lol. Only other way is "blue light mode" which is trackball and power, but I don't feel like explaining it to you=p.
Click to expand...
Click to collapse
ohh, to be honest, i've tried the Call + TrackBall + Power too, yes the LED light up blue, and then nothing happened while the LED still light blue.
dioadi said:
ohh, to be honest, i've tried the Call + TrackBall + Power too, yes the LED light up blue, and then nothing happened while the LED still light blue.
Click to expand...
Click to collapse
Nothing is supposed to happen unless you have a JTAG afapter. And why the hell post in two different forums?
mejorguille said:
Nothing is supposed to happen unless you have a JTAG afapter. And why the hell post in two different forums?
Click to expand...
Click to collapse
wow, i guess JTAG Adapted would be another long explanation, huh?
yes i made two posts. You know that sometimes, some people prefer to go to just specific thread/subforum, ignoring the other thread/subforum.
but who know if that people can help me?
hey, i'm back.
after days to days downloading DREAIMG.nbh again and again, finally i got the right DREAIMG.nbh, not corrupted one.
and yes, i successfully update, all stuff are signed "OK" , and then i press the action (trackball) button, restart the phone, and guess what? it turns back to the beginning problem, still. "G1" logo, and then turn to whole black screen.
so, now what?
am i bricked?
or is it hardware problem? (remember i said that everytime i turn on the phone, the down part, near sim card, is always getting heated)
the only screen that can be accessed is that rainbow screen and the update screen (Camera + Power).
dioadi said:
hey, i'm back.
after days to days downloading DREAIMG.nbh again and again, finally i got the right DREAIMG.nbh, not corrupted one.
and yes, i successfully update, all stuff are signed "OK" , and then i press the action (trackball) button, restart the phone, and guess what? it turns back to the beginning problem, still. "G1" logo, and then turn to whole black screen.
so, now what?
am i bricked?
or is it hardware problem? (remember i said that everytime i turn on the phone, the down part, near sim card, is always getting heated)
the only screen that can be accessed is that rainbow screen and the update screen (Camera + Power).
Click to expand...
Click to collapse
im pretty sure the heat issue comes from the processor, not the sim card. mine does that too. its nothing to worry about as long as you havent overclocked your device (mine is overclocked and works great aside from gettin warm during heavy usage.) what happens when you plug the phone into usb? does it show the SD card or can you get into the android sdk? its a long shot as i doubt you can get into debug mode without having a uncorrupted os, but i guess its worth a shot.
BuddhaTeh1337 said:
im pretty sure the heat issue comes from the processor, not the sim card. mine does that too. its nothing to worry about as long as you havent overclocked your device (mine is overclocked and works great aside from gettin warm during heavy usage.) what happens when you plug the phone into usb? does it show the SD card or can you get into the android sdk? its a long shot as i doubt you can get into debug mode without having a uncorrupted os, but i guess its worth a shot.
Click to expand...
Click to collapse
the phone can't get into the home screen, it's always going blank after Tmobile-G1 logo.
so when i plug the phone into usb, it's just charging, no SD card recognizing on my computer.
And how can i get into Android SDK ?
Google is your best friend.
Sent from my HTC Dream using XDA App

HD2 end/power button and volume up key do not work, what should i do ?

So I have this hd2 that I have to send by Monday to my brother. I bought this phone for 160 and I was told the end / power key does not work. There was also a pass lock on the phone. Now I could somewhat survive without the end button but I needed to hard reset or erase all memory from the phone to get rid of the password... but I can't do that because the stuck power button won't let me do that. I managed to get past the password via hspl, but I know also realized the the volume up button doesn't work either. Now when I said the end button doesn't work I meant that it wouldn't wake up when I press it, nor will it shut off... and when I put in the battery it turns on by itself, I don't even need to press anything. So I am guessing the problem is the flex cable is always pushed in... I cannot ship it to HTC because I flashed it and the warranty is gone, and every repair shop doesn't know what I am talking about.... please help me and tell me what to do this is very urgent.
I appreciate all the help,
Danny
i think the flex ribbon is damaged!
there are easy to source, try ebay
volume button, im not sure
Thank you for the help, but its to vague... I also heard its very tough to open the hd2
you can easily flash your stock spl via hspl2..just run it and select your stock spl.
stock rom and radio can also be flashed (you have to perform this before, because you cant flash via sd card).
take it to htc...wheres the problem?
DN41

[solved] bootloader dont load

wanted to install wp7 with a clean start...so tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
How did you fix it? For other users in this position.
Sent from my HTC HD2 using XDA App
SOLVED {bootloader dont loadArrow}
Here is what I did..
B4 that some background -
I used to heavily try different roms/mods and always played with android sd and nand versions…win 6.5X in multiple cooked version….
So my tmo-hd2 has been formatted/hard reseted/flashed many many times
By virtue of this….my screen died….slowly my screen touch responsiveness malfunctioned and eventually died… all hardware keys were working perfectly by the touch was dead….
During the process of screen malfunction to completely dead….made few observations to not things which might help fellow Hd2 owners…one thing is power/end key seems to be the culprit (this is my observation/belief).
Since I don’t live in US spend 100$ in changing the screen since then everything is working well…I still rig my hd2 like I always do…
Well when the wp7 was released, wanted to give a try…did this…hspl pkg 3 spl 2.08 hspl > then task 29 > and my hd2 didn’t get into bootloader at all…..i was doomed as there hd2 (after task29) didn’t hv os..
Searched for the solution everywhere and eventually nothing worked for me…I was about to give up…suddenly sometime struck my mind…wat if the power/end key is the problem….then things were positive..
I opened up my hd2 (unscrew and removed the back panel) and disconnected the connector flex rigid board (A board) of the hardware keypad from the mainboard….and pushed the battery in and pressed reset (sometime u need to plugin the usb cable to wall charged/pc to wake up the phone) and held volume down key and hopped for some miracle.
Viola saw the tricolor screen after eternity – since the back panel (not backcover) was open I help the battery to the pins and didn’t even move my fingers …run the stock rom installation and held the battery tight in place and waited to get the rom completed…the moment its 100% relaxed my fingers and reconnected the flexboard connector, re-assembled my phone and everything was back to normal…
ONE THING I LEARND FROM THIS…..HD2 IS A ROCKING PHONE AND U CAN RESURRECT IT WHATEVER HAPPENS TO IT (if at all some1 screws it with wrong radio…its officially bricked, but still it can be revived using RIFF JTAG method and rewrite boot data).
One final request pls DON’T GIVEUP ON YOUR DEVISE
Now I have wp7 running successfully and waiting for my activation code for live services
_____________________________________________________________
Thank me if this was useful
I can confirm this does work. I myself was going to give up until I found this and well thank you!
fcpelayo said:
I can confirm this does work. I myself was going to give up until I found this and well thank you!
Click to expand...
Click to collapse
happy it worked for you....promote this solution....others might benefit.
also hit thanks if u think its worth it
May I link to or rewrite and credit you with this in my guide?
interesting, two confirmations in this thread, and there's another thread where 2/3 people successfully used this method.
That whole lower right area is the Achilles Heel of this phone, keypad, screen connector and most pressed key all right in one little place.
Bring me the chief designers head on a plate!
Yes. The only downfall of the hd2. I wish it had the soft screen keys at the bottom.
Sent from my HD2 using xda premium
kylew1212 said:
May I link to or rewrite and credit you with this in my guide?
Click to expand...
Click to collapse
Would like to divert folks to this thread and share experiences here so every one will hit the same link to get benefit, If thats oki with you. let me know
samsamuel said:
interesting, two confirmations in this thread, and there's another thread where 2/3 people successfully used this method.
That whole lower right area is the Achilles Heel of this phone, keypad, screen connector and most pressed key all right in one little place.
Bring me the chief designers head on a plate!
Click to expand...
Click to collapse
yup...and the interesting thing is, i befriended an HTC engineer and got hold of multiple 'a-boards' at that time to test this out.the flex-board that reacts when we push the button.
there were multiple models/molds for HD2...may be different production lines..everything did the same job including the one which was shipped with the device..'a-board' wasnt the culprit here..the very design of having power + end call + device unlock in the same key/button is the issue.

Check SPL problems

Awesome guides! No doubt about that. I'm not a complete noob but I am new to the HD2 and I feel stupid bc I can't get past the first step I am frustrated cuz I have been looking all over for ways to check SPL my trio screen that everyone talks about is not coming up. Idk what to do. I've done the volume down with power button and also tried pressing the reset button in the back just to see if it works. I boot into Windows to make sure the volume down works and it does.
I have the tmobile version Leo 1024. Any suggestions.
Sent from my HTC Amaze 4G using xda premium
fcpelayo said:
Awesome guides! No doubt about that. I'm not a complete noob but I am new to the HD2 and I feel stupid bc I can't get past the first step I am frustrated cuz I have been looking all over for ways to check SPL my trio screen that everyone talks about is not coming up. Idk what to do. I've done the volume down with power button and also tried pressing the reset button in the back just to see if it works. I boot into Windows to make sure the volume down works and it does.
I have the tmobile version Leo 1024. Any suggestions.
Sent from my HTC Amaze 4G using xda premium
Click to expand...
Click to collapse
Pull battery, press volume down and hold, push power and hold both. Tri color screen should be there.
Sent from my HD2 using xda premium
Like everyone says. Volume down + end key.
Hold the volume down until the tri-color screen shows up.
I know you've said that.. just make sure you continue to hold volume down
Maybe that will help.
thank you guys but idk why it is not working but i finally managed to get it to bootloader by trying to install hspl3 it automatically sent me to the bootloader screen. After it said "we hacked it" i rebooted and tried to see if it would work with the typical hardware button
voldwn + power button and then let go and it still does not work.? :/
ps . i let go of power button but kept holding the voldwn and still did not work.
fcpelayo said:
thank you guys but idk why it is not working but i finally managed to get it to bootloader by trying to install hspl3 it automatically sent me to the bootloader screen. After it said "we hacked it" i rebooted and tried to see if it would work with the typical hardware button
voldwn + power button and then let go and it still does not work.? :/
ps . i let go of power button but kept holding the voldwn and still did not work.
Click to expand...
Click to collapse
You are completely turning off your phone and then doing this to power it up right?
Sent from my HD2 using xda premium
Yes and so I started following your guide to install clk since I know that I at least now have hspl3 installed and in the part where you task29 I followed instructions successfully flashed. Everything is going well until you say to reboot into boot loader mode by removing battery and voldwn + power. I try it hoping it would finally work and it doesn't.
Make story short my phone is stuck at the "stick together" screen. I tried getting into boot loader mode by running the hspl install program but bc is stuck on the screen comp is not able to recognize phone. Am I bricked?
Btw I pm you Kylew
Sent from my HTC Amaze 4G using xda premium
Nice, real slick move,, you can't get into bootloader, yet you still decide to go ahead and wipe the OS, so now you have a non booting phone and no access to bootloader.
That's a handsome if totally useless lump of glass and plastic you have there!
JTAG, or sell for spares. (Well, after trying everything you can think of, but all I can think of is freezer trick, but its a loooooong shot. )
samsamuel said:
Nice, real slick move,, you can't get into bootloader, yet you still decide to go ahead and wipe the OS, so now you have a non booting phone and no access to bootloader.
That's a handsome if totally useless lump of glass and plastic you have there!
JTAG, or sell for spares. (Well, after trying everything you can think of, but all I can think of is freezer trick, but its a loooooong shot. )
Click to expand...
Click to collapse
what is jtag and whats the freezer trick? is there any other way to get into bootloader mode maybe with sd?
Im willing to open the phone and remove or unplug a strip to completely erase any stored data and hope that it boots into bootloader?
SOLVED!! hope this helps someone else
i got it to work. My god there are soo many ppl with this phone soo many threads and post not sure if thats a good or bad thing lol anyways out of all the searching I found this guy to have had the same as me and he solved it. It was impossible for me to ever i mean EVER boot in to the trio color screen or bootloader what ever its called using the hardware buttons even tho the hardware buttons do work. I was able to get into bootloader when comp and phone sync and I used the hspl3 program to boot the phone when it was fully on the win mo stock.
Anyways I just followed this :
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
I opened up my hd2 (unscrew and removed the back panel) and disconnected the connector flex rigid board (A board) of the hardware keypad from the mainboard….and pushed the battery in and pressed reset (sometime u need to plugin the usb cable to wall charged/pc to wake up the phone) and held volume down key and hopped for some miracle.
Viola saw the tricolor screen after eternity – since the back panel (not backcover) was open I help the battery to the pins and didn’t even move my fingers …run the stock rom installation and held the battery tight in place and waited to get the rom completed…the moment its 100% relaxed my fingers and reconnected the flexboard connector, re-assembled my phone and everything was back to normal.
I also used these pages for reference on parts:
http://www.ifixit.com/pdf/ifixit/guide_5919_en.pdf
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
ps. no need to take the whole phone apart. I believe you are disconecting the AP FPC from main board which is connected to your hardware buttons if I am correct.
Edit: I want to give credit to kylew1212 for walking me through the rest of the installation of my android.
Interesting, good job.
i have a lot of sympathy for his viewson peace

Categories

Resources