Database Users

Help with MyTouch 1.2

ok i was flashing my mytouch 3g 32a 1.2 yesterday and something went wrong i know cant flash any roms from recovery because the phone wont read my sd card i have RA-sapphire-v1.6.2g recovery
adb dosent work and fastboot tells me remote not allowed
info:
Sapphire PVT 32A Ship S-ON G
Hboot-1.33.0013 (sapp31000)
cplid-13
Radio-2.22.23.02
PLZ!!!!!!

Re: HELP!!!!!!
Pretty sure its bricked. Sorry man
-------------------------------------
Sent via the XDA Tapatalk App

Re: HELP!!!!!!
Have you tried restarting the root process?
-------------------------------------
Sent via the XDA Tapatalk App

tried everything new sd cards and such still nothing i dont knoe wut to do cant find any answers on the forums either

ghost4991 said:
ok i was flashing my mytouch 3g 32a 1.2 yesterday and something went wrong i know cant flash any roms from recovery because the phone wont read my sd card i have RA-sapphire-v1.6.2g recovery
adb dosent work and fastboot tells me remote not allowed
info:
Sapphire PVT 32A Ship S-ON G
Hboot-1.33.0013 (sapp31000)
cplid-13
Radio-2.22.23.02
PLZ!!!!!!
Click to expand...
Click to collapse
Well you need to use a goldcard to get an engineering bootloader on your phone.
But if your phone won't read the sdcard I suppose you're screwed. Try to make the goldcard again, if that fails try a different sdcard and make a goldcard of that one. You will just need to pull the battery out of the phone, hold the back button, put the battery back in the phone while holding the back button. From there I think it should start reading the goldcard (hit the back button again if not) and it should eventually ask you if you want to start the update. Hit the trackball to start. Of course all of this is assuming that you have a working goldcard. Afterwards you can just follow the rest of the instructions. You can also use the link in my signature for reference. Good luck.

[Q] [HELP] HTC Magic 32A bricked i think...

hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,

NOT DEVELOPMENT RELATED
iondarie said:
hello everyone,
Last night i tryed to update my phone with a ruu file the program started erasing flashing etc... untill i was left with a white screen where i have the following:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0009 (SAPP10000)
CPLD-12
RADIO-6.35.08.29
Dec 8 2009, 17:38:48
RUU USB
And the image of a chip...
Can anything be done please help,
Click to expand...
Click to collapse
NOT Development related​
Moving to General.
Please be mindful of where you post your inquiries. The Development sub-forum is reserved for developers with contributions ONLY!
Thank you.

Make goldcard and flash again.

Hi
my device screen shown hexagonal on chips,like your device ,stuck on RUU USB,
last time i ask anybody here what i can do..i didn't found ..
nothing we can do as long as we have a root,
if you have a root you can
fastboot oem rebootRUU.
or tell us your
fastboot oem -h ,screen..
Now i can fix my phone by myself. i got JTAG ,and built my own ,
just only JTAG can works,God save my phone..

Man you dont need jtag!!!Dont pay for this situation!Just find an original Signed RUU and flash like nothing happens.Or create goldcard from another android phone.!

yes if
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..

awebagar said:
if your SD card can read by device,yes you can use RUU update.
if you SD card can't read no nothing you can do.
if your oem boot stuck on strange boot, you must pray a lot to God..
Click to expand...
Click to collapse
His phone is not MT3G v1.2 or Fender, his phone is common HTC Magic 32A, so he need create goldcard and flash RUU again
His first attempt was wrong cause every official ROM checks CID on phone. If phone's CID is not equal with ROM CID then update will fail. RUU updated hboot and radio and failed at CID-step and locked in RUU-mode.

Is this HTC Magic bricked?

Hello,
I recently tried to update the spl/radio to use a new rom on my HTC Magic 32A and after updating the spl the phone just hangs on the "HTC Magic" screen. Fastboot or Recovery wont start if I hold the buttons. Was just wondering if it is bricked or if it is possible to fix via cmd or so? I read alittle on jtag but I think if it came down to that Ill just buy a new phone cause this phone is not worth that much trouble.
I rooted the phone a year or so ago. First I had cyanogen but they dropped support so I switched too gingeryoshi but the wifi stopped working. It still connected to tmobile hotspot but I couldnt tether or connect to my wifi. So I thought of putting on Froyodragon. I updated too HBOOT-1.76.2007 but then it just hanged on reboot.
Thanks for any input.

Turn phone off (if you have bootloop then remove battery and place it back after 10-20 sec)
Turn on by pressing Back + Power - it's fastboot-mode
Write first 5 rows of info (all symbols are important)
If you do not have Android Sdk Tools configured - do it
Additionaly search for fastboot.exe - this utility can be absent from sdk tools
Connect phone to pc when it in fastboot-mode
Run
Code:
fastboot getvar cid
fastboot getvar cidnum
fastboot getvar version-main
Sent from my A7-040 using Tapatalk

hello,
I tired back+power, power+vol down, and power+home, they all just sit at the "HTC Magic" screen.

Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?

same problem
Sir im also facing the same problem like this person is facing:
I guess that I've bricked my HTC magic phone. actually it was working fine but after when i flash Hboot file named (ISO-8859-1__STOCK-HBOOT) on it.
my device stop functioning not any key is working phone its not coming up in hboot loader screen by pressing vol down key+power key, not even in recovery mode. by pressing home key+ power key.
but if i press vol down+power key its not showing any hboot loader screen but if i use command prompt after that and use fastboot devices command its shows the device like in machine language
just like this:
D:\adb\tools>fastboot devices
?╞ñ?¿╥§?4:¶♫ fastboot
here are the details of my mobile. is there any way to fix this issue?
HT03VPB03044
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013
CPLD-13
RADIO-2.22.28.25
OCT 21 2009, 22:33:27
android 2.2.1
baseband version
62.50sj.20.17u_2.22.28.25
kernal version
2.6.32.9-g94b855e
[email protected] #1
buid number
3.56.531.1 CL300801 realase-keys
Sir i've also created gold card on my htc magic phone when it was working properly i've the image of gold card and the same card 512MB micro SD card which i used to create the gold card before but i dont know how it will work on the phone as it is not going into bool loader or in recovery mode.
please help me. i heard that if i got correct RUU file for this device i can troubleshoot the problem but in stock rom no any RUU file is working on it.
I've already tried there RUU ROM on this device:
RUU_Sapphire_T-Mobile_US_2.10.531.3_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_2.10.531.4_release_signed_NoDriver
RUU_Sapphire_T-Mobile_US_3.12.531.1_FRG83D_release_signed
RUU_Sapphire_TMUS_1.94.531.1_DMD6_release_signed_N oDriver
i request all the XDA member to help and troubleshoot this problem.
regards
Sandeep Deol

5[Strogino] said:
Did you remove battery before try and placed it back? If yes and any combination did not help -> 'brick'. Only JTAG can help.
What ROM did you have before?
And what ROM did you update?
There are no bricked phones when 32A phone updating with 32A official ROM. I don'y understand how you bricked your device.
Even if hboot updated but radio did not - there are some chances to restore...
Tell us how it happened?
Click to expand...
Click to collapse
Yes I removed the battery (only way i could turn it off). I stated most of this info in the first post but Ill try and state specifically what versions I had. When I first rooted I used Cyanogen Rom. It worked fine but they dropped support so I switched too Gingeryoshi. I dont remember what version. I tried to update it too 1.5 first but it didnt work but fastboot and recovery still worked so I decided to switch to a new rom instead and tried Froyodragon but it needed radio 6.35.16.19 and HBOOT-1.76.2007. So I wiped it then I did the HBOOT-1.76.2007 and after installing and rebooting is when it stopped working.

Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.

jmdsdf said:
Crap, I just did this too... got a yellow arrow coming from a box onto an Android. I flashed a mismatched 6.35 radio (I guess?).
Can't boot to fastboot--can only boot to blue light mode (trackball+power) and phone will charge if connected by USB--but is never recognized by ADB or fastboot.
Click to expand...
Click to collapse
Wait 5-10 minutes, "yellow arrow coming from box" equals unpack and flash. Phone should finish this process.
Try to load into hboot-mode: turn phone off (remove battery and place it back if bootlooping), then turn on by pressing Volumedown + power
In this mode you can flash full official rom in sappimg.zip format (or sappimg.nbh if you have 32b magic)
If phone doesn't load into any mode (except trackball + power) - then you have brick and only jtag can help.
Sent from my A7-040 using Tapatalk

But, it goes to a black screen about ten seconds after that.. sadly I think it needs to be jtagged and i will just give it away for parts.
I also tried the sapphire image trick, no luck.

those all sound like bricks..

problem with 32b - looping after rom.
Believe me, I tried a lot here and on google before posting here.
I tried to install a ROM on my htc magic 32b and certainly was not what I should.
Information from my device:
SAPPHIRE PVT 32B SHIP S-ON G
Hboot-1.33.0013 (SAPP30000)
CPLD-10
RADIO-2.22.28.25
OCT 21 2009,22:33:27
I've read very, very much. I read that I have to change the SHIP for ENG.
Also read about ruu, but I found a will for my device, nor know how to run.
First of all, my phone is only on LOOP. I can normally access the fastboot USB.
But does not accept commands, I believe it because of S-ON.
I do not know how to install an img it to get S-OFF.
Could someone help me get back my life device?
Thank you and with the help of google translator.

huahua!!!!
No one post about my problem...

Fastboot FAILED... (remote: not allowed) problem!!

Hello everyone!
I need help with my phone ASAP. I recently tried to get Ginger Yoshi 1.5 on my phone but I needed to change my Spl and radio to 1.33.2010 and 3.22.20.17. I managed to change them both but that's when everything started going bad. When I changed them my phone went from 32A to 32B, at that moment I thought something had went wrong so I flashed back my Spl to what I think it was the stock Spl 1.33.0013. After that it went back to 32A but the radio remained 3.22.20.17. I havent changed it back or anything because now my phone is kinda bricked. I only have access to fastboot\hboot screen, but when I try to flash something it wont let me saying "FAILED (remote: not allowed)". If I try to update Hboot mode it says "Model ID incorrect! Update Fail!".
I have been searching for a solution but I haven't seen anybody else with my spl and radio combination. I'm starting to give up hope on my phone . I don't know what to do anymore. I need some help.
Yes, I'm a newbie at this. I think this is my third time changing a ROM.
Thanks in advanced for any help and/or advice!
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
OCT 21, 2009, 22:33:27

Do you have access at android?If yes try rooting and flash custom recovery.Then flash from recovery new unlocked Hboot.

nikosdd said:
Do you have access at android?If yes try rooting and flash custom recovery.Then flash from recovery new unlocked Hboot.
Click to expand...
Click to collapse
Hi there! If by that you mean if I can actually boot a ROM then I can't, it stays in the HTC Magic screen. Or if you mean if I can get adb connection with cmd I can't also because it does not recognizes my phone. All I get access to is fastboot and hboot, though it doesn't work either.. I try to flash a new radio, spl or recovery image but it does not works. Maybe I need a new goldcard? Since it says model ID incorrect.
Thanks for your help!

Your phone is MyTouch 3G v1.2 with audiojack 3.5" and it is NOT common 32A. Don't use manuals for Magic 32A.
You flashed wrong combo and it is main problem. May be this manual will help, but i have no guarantee
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
p.s. Megaupload links are dead cause US District Court shutdowned this site)
http://www.4shared.com/zip/hW3I1tfT/MyTouch35RootingFiles.html
http://www.4shared.com/zip/ALht1xbT/unlockr_Sappimg_mt3gv12.html
p.p.s. And you need goldcard. Must have goldcard to flash special sappimg.zip
Tech reasons of solution:
- you have perfected HBoot and can't flash anything by 'fastboot flash' command
- you have wrong radio (combo, cause hboot and radio must be together)
- if you will flash special sappimg.zip you will have 1.33.2010 s-off eng hboot. With this hboot you can flash your stock combo back (and don't forget about custom recovery for mt3g v1.2)

Yes my phone is the Fender LE. I found out that even though they say 32A they're actually 32B as well. What a way to get confused. And as you said, some links are broken because of megaupload no longer existing . I couldn't find the files that I needed. My phone is now fixed running Cyanogenmod 6.1.0 (I gave up trying to flash ginger yoshi, I don't lke the idea of having to change spl and radio).
After I found out what I had to do to fix it I thought that it wasn't so big of a deal, just flash a sappimg file with a diferent Spl and that is it, S-off and an Eng spl.
Though when it said "Model ID incorrect" I had no idea why that happened. I had to open the Hex editor again an re-edit my Sd card's code with the goldcard I had created before. After that everything went back to normal, I flashed CM6 and now my phone is up and running like a charm!
I've seen some other users with the same problem I had, maybe if someine would explain them what they need to do to fix it would be a good idea.
Thanks for explaining! And for the links.
This is what I now have:
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.xx.xx (I forgot the last 4 numbers )
Running CM6.1.0

Now can not download the Stock rom with root for MT3G 32A 1.2 because all the link are dead. Could you please give a helping hand?
Thank

See if you find the rom in this link.
http://shipped-roms.com/index.php?category=android

Thank you,
but still can't

[Q] HTC Magic bricked ? blocked on RUU USB screen ; S-ON ; Changed 32B to 32A

Hey guys !
I tried to repair my HTC Magic 32B (Vodaphone) and put the CyanogenMod 6.1. After some stupid tests I think I brocked my phone. By the way I installed a 32A version...
The RUU screen is the only one availible. This is what I can see :
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-10
RADIO-6.35.10.18
Jan 14 2010, 00:14:58
I can use some fastboot commands.
I can't access to the recovery screen. I can't flash any image.
I can't use ADB, so I can't change the S-ON to S-OFF.
If I launch the RUU updater there's a freeze at 81% on a step (famouse problem because of a wrong SPL or Radio version I don't really remember).
I created a goldcard with another androphone, if it can be helpfull...
I hope somebody can help me I'm really disarmed...
Regards.​PS : Sorry if there are some mistakes in my sentences I don't speak english very well and I do my best.

LOL :laugh: you are trying to change thing which are never made to change, you definitely need a RUU, flash the Vodafone 32b RUU and read before you proceed don't download wrong file or else your phone will be useless.
RUU link
i use ruu once a month for my device lol best of luck

Yeah I ever tried to install a RUU update 32B voda (In my case 1.91.163.1 Vodafone France DRC92) but there is a bootloader error.
hxxp://lightpics.fr/images/3/mPEWt.png
(juste replace hxxp by http, you know...that antispam security)
But if I try with a 32A version (like xxx.4shared.com/file/ 203189441/59bd18ab/RUU_Sapphire_HTC_Europe_305401.html) there is that freeze at 81% at the "System Update" step.
(replace xxx by www)
Thanks for replying I think this is a kind of tricky problem.

ya it is tricky, the hboot info u have provided looks messed up, so can you tell me your stock hboot detail, then I can help you better.
1: which board it 32A or 32B?
2: which brand it is google (G) or HTC (H)?
3: and radio and hboot?
your radio is of Rogers Canada WWE (RUU), your spl is of three different RUU
---------- Post added at 01:05 AM ---------- Previous post was at 12:38 AM ----------
I found one RUU for your device of which spl and radio is same :cyclops:, as the one you mention but only its board is 32A.
RUU no. :
38) [xda-ftp] [4shared] 3.05.631.7 Rogers Canada WWE
use find(Ctrl+F) feature of your browser to easily locate it
see if it works :fingers-crossed:

Woah..I changed many things, including HBOOT, so yeah I don't really remember the default configuration.
The default configuration is a HTC Magic 32B "with Google", not Roger.
I'm not 100% sure but I think the HBOOT version was something like 1.33.xxxxx
I can't remember anything else.
Edit : You edited your post while I was posting mine. Should I follow your instructions anyway ?
Edit 2 : I don't wanted to wait so I downloaded and launched the RUU you recommanded to me but I still have the same freeze problem at 81% during the system update...damn
Edit 3 : I checked the default CID with a fastboot command and the CID is VODAP203 (seems logic because my phone is from a french operator). After a search on Google the HBOOT version corresponding is 1.49.xxxx

hmm.... I have experienced the problem you are facing and correct RUU is the only option. I am from India and my magic is shipped from U.S., I have to flash the U.S. version RUU and not the Indian one, may be you are also experiencing same problem. I hope your battery is okay and even your usb besides don't any USB hubs or USB spliters make sure there is a direct connetion between your phone and PC (some USB hubs are slow so a conflict might occure) just to be safe.

sorry for replying late, see if this works for your device, you will require a goldcard for this http://forum.xda-developers.com/showthread.php?t=548218
also tell what is your main version

satanic666 said:
sorry for replying late, see if this works for your device, you will require a goldcard for this http://forum.xda-developers.com/showthread.php?t=548218
also tell what is your main version
Click to expand...
Click to collapse
I can't access to the bootloader screen, only the RUU screen so I can't update the sappimg.zip.

for starting the ruu process, turn off your device, manually press back+power key to load fastboot while your phone is connected to PC, then in cmd go to place where you have placed ADB then type
Code:
fastboot devices
you see a device in the list then proceed with the running RUU (currently i m assuming you know about using adb )

The command returned the string : HT93SKF07033
Thank's for replying again.

satanic666 said:
hmm.... I have experienced the problem you are facing and correct RUU is the only option. I am from India and my magic is shipped from U.S., I have to flash the U.S. version RUU and not the Indian one, may be you are also experiencing same problem. I hope your battery is okay and even your usb besides don't any USB hubs or USB spliters make sure there is a direct connetion between your phone and PC (some USB hubs are slow so a conflict might occure) just to be safe.
Click to expand...
Click to collapse
hi i am from india i too have the same problem i receive the message on screen sapphire pvt 32a ship s-0ff
hboot- 1.76.009 (sapp*****)
cpld-10
radio-6.35.08.29
dec 8 2009, 17:38:48 plz help and tell the perfect ruu which will work

rs32323 said:
hi i am from india i too have the same problem i receive the message on screen sapphire pvt 32a ship s-0ff
hboot- 1.76.009 (sapp*****)
cpld-10
radio-6.35.08.29
dec 8 2009, 17:38:48 plz help and tell the perfect ruu which will work
Click to expand...
Click to collapse
what is your uid when you check it under adb??
Sent from my Dream/Sapphire