Database Users

Stuck on t mobile stick together screen...

ok so i had kumars v 1.4.. and than updated to his v 1.5.. to update, i synced the phone with active sync and ran the RUU file.. now im stuck on the tmobile stick together screen.. i dont want to touch the phone until you can give me some advice
im showing
R 2.08.50.08_2
G 15.34.50.07U
D 2.10. KUMAR P1
PLEASE HELP!!!!!!!!!!!!!

Firstly, better to ask this in the kumar thread.
Secondly, try flashing it again, could be a bad flash.
Thirdly, your radio doesn't quite match the ones listed by kumar. (Although it is very close, so unlikely to be that.)
Oh, and you did do a hard reset after flashing, right?

yes hard reset was performed to no avail.. but just to clarify as long as i flashed HARDSPL the first time that will protect my phone from being bricked correct|?? because if thats so i will try to flash the rom again.. im not able to flash again because active sync is not recognizing the phone

oh i am so sorry.. thank you very much for your quick reply...

Take the battery out >> put it back in >> Hold down the volume down button >> press the Power button. This should take you to the bootloader screen and from there you should be able to reflash.
Good luck

Flash the stock ROM again from the bootloader as the above poster has stated. If not flash the ROM from the MicroSD card.

AllTheWay said:
Flash the stock ROM again from the bootloader as the above poster has stated. If not flash the ROM from the MicroSD card.
Click to expand...
Click to collapse
The stock rom isn't out yet.
2.10.0 is out, but the hd2's came shipped with 2.10.1
Working on it.

Well.... Any updates? Im sure you didnt go to sleep with it being stuck on the StickTogether screen lol

If I was the Op, I'd task 29 and reflash. It should works fine. I've never brick and htc phone and I dont think the HD2 is that easily brick if you use common sense.

romeo0119 said:
If I was the Op, I'd task 29 and reflash. It should works fine. I've never brick and htc phone and I dont think the HD2 is that easily brick if you use common sense.
Click to expand...
Click to collapse
the tmous is realy easy to brick. just flash any radio with a ..51.. version.......... brick.

alright..so what ended up happening is from boofloader i tried to reflash 1.5 to no avail..
so rather than trying to figure out how to flash back to stock rom, i figured i would try kumars 1.4 which i had installed previously. And sure enough everything worked again .. sorry it took so long to update. last night it wa s too late for me to post and ive been working the whole day..

pookeee said:
ok so i had kumars v 1.4.. and than updated to his v 1.5.. to update, i synced the phone with active sync and ran the RUU file.. now im stuck on the tmobile stick together screen.. i dont want to touch the phone until you can give me some advice
im showing
R 2.08.50.08_2
G 15.34.50.07U
D 2.10. KUMAR P1
PLEASE HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
I had exactly the same problem when flashing v.1.6. Then I flashed back v.1.5 and it works OK.

Hi I have the same problem, though I didnt flash a custom rom.
I'm stuck at the stick together screen, after flashing a stock rom to my tmobile hd2.
I tried to reflash but it gets stucked at 0%, and it wont move.

Raioneru said:
Hi I have the same problem, though I didnt flash a custom rom.
I'm stuck at the stick together screen, after flashing a stock rom to my tmobile hd2.
I tried to reflash but it gets stucked at 0%, and it wont move.
Click to expand...
Click to collapse
try to force it into bootloader first and then flash.

HotShotAzn said:
try to force it into bootloader first and then flash.
Click to expand...
Click to collapse
I did it, it is still stuck at 0%

did you flash from sd card? what does your spl say in bootloader? could be that you have flashed away hspl, and the stock you are trying is not quite a match. (There are several 'stock' versions i believe)
try re aply hspl, flash the rom from usb, then use the hspl app again to remove the hspl, and hey presto, , back to stock.

I dont have the red inscriptions when it shows the sticck together logo.
I didnt flash from the SD card(...) basically this is a stock phone with a stock rom I guess.
so I tried HSPL2_1024_RUN
it told me that my version was 2.08.0000 and it gave me 2 choices, going to 2.08.HSPL
I tried both, but it gives me an error.
CRITICAL ERROR
Flow: 00000006
Error code: 00000000
Description: Unknown
ps: Im constantly on the forum, so just reply and I will reply within 5 mins

go into bootloader manually, plug into a usb port around back of pc, use one you dont usually use, wait for it to connect, and run hspl1024, remembering to right click & run as administrator. Choose 2.08.hspl, and cross your fingers. Ill cross mine for you too.
if hspl wont load, all i can suggest is different usb ports, maybe remove the drivers, and letting it downoad new ones from the net, especially if you've ever used mtty.

ok so it does not work, hum I guess i'm screwed what can I do?

by the way here is whats written on the bootloadeer screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40

[Q] New in upgrade mobile, what do I do?

Hi all,
I'm brand new in the art of updating mobiles.
I would like to update my HD2 to andriod but have no idea of how I do it. I have looked at a lot of threads but it seems that I need ot know a lot about my phone before I can start!!
Can anyone help me how and where to start?! What do I need to install and how do I install it :/
My phone data:
OS version 5.2.2.1913 (21913.5.0.94)
Manila version 2.5.20181527.0
ROM version 3.14.403.2 (04666) DAN
ROM date 10/4/10
Radio version 2.15.50.14
Protocol version 15.42.50.11.U
When I press volume down and start my phone it say
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Best regards,
Peter

Knowledge is power my friend and d answers u seek are but a click away...All u have 2 do is read, read n do more reading...follow all instructions written by devs to d letter as they were written for a reason...Wat reason?...
Avoiding errors or turning your beloved HD2 into an "Expensive Paper-Weight"....Getting android onto ur device is quite easy, u just have 2 put in d time 2 understand certain terms n how d needed softwares work...So summary?...Start reading from here. When u have properly familiarized urself with flashing then visit the HD2 android development section n check out several builds available...u must make a choice urself as we wouldn't know wat u lyk...so feel free 2 test as many as u can.
P.S. Its crucial u first perform a HSPL (2.08 HSPL) on ur fone before doing ANYTHING else.

The post above isn't really helpful. He's obviously read a lot already lol.
I know getting in to flashing and stuff on the HD2 is very confusing at the start, but once you learn it once you learn it forever.
Basically first off, you need to flash HSPL 2.08 to your phone. To do so download 'HSPL4' from these forums and flash that. Just search for it and you'll find it. It'll have instructions on how to install it on the thread which is very easy.
Just boot to SPL and connect to USB and run the .exe file inside of HSPL4 and choose 2.08.HSPL from the drop down menu.
After this you need to flash the newest radio which is 2.15.50.14. There's a sticky in all the HD2 development threads that have all the radio's. Just look in the WinMo or Android section and it'll be stickied. You basically then open the file you downloaded with the radio in it, boot to HSPL (you've just flashed HSPL over SPL) and run the RomUpdateUtility and just click on all the next and update buttons on the window that'll pop up and it will install. Obviously you need your USB cable plugged in for this too.
After that, you need to flash MAGLDR. I can't get links at the moment but you should easily be able to get a link to the MAGLDR thread and download it. After you've downloaded it to your PC, it's basically the exact same procedure as flashing a radio. Bootloader > USB connected to phone > open RomUpdateUtilty and follow instructions and flash. After this finishes installing you're basically done and all you need to do is flash your Android ROM. Just go in to the NAND Development section and chose a ROM to start from.
Another option is to flash Clockworkmod Recovery after MAGLDR.
You simply flash that by going in to MAGLDR (keep holding power/end key while phone is booting) and go to USB Flasher using your volume buttons then going in to it by the call button. Then opening the .DAF file on your PC and following the instructions and clicking next. Obviously again with your USB cable plugged in too. This is how you flash ROM's/Clockwork.
Any other problems I'd be more than happy to help with.
Just to mention too - the HD2 is very difficult to brick so don't worry about bricking your phone as I don't think there's actually a way to do it other than flashing the wrong radio if you have a TMoUS HD2 and you flash a .51 radio which you won't do as I've told you the correct radio to flash.

from the info he posted about his phone, it seems it already has the latest radio installed (2.15.50.14) I'm guessing that he's got a phone from somewhere in EU since the TMOUS came with the 2.08.50 radio, unless I'm mistaken, and there are some later models of the US hd2 that have the 2.15 radio, but anyways if the info is correct then he doesn't need to worry about the radio, he needs :
HSPL4> 2.08hspl http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
Clockworkmod Recovery http://forum.xda-developers.com/showthread.php?t=898913
any more info go here http://forum.xda-developers.com/showthread.php?t=905841
and his rom of choice. I'm sure with this info he can get to where he wants to go, good luck!

Woops my bad, didn't even read the OP info part. Well done for posting the links though as I can't at the moment.
Also about clockwork, make sure the you have the right clockwork partition for the ROM or else you'll get stuck on a boot-loop. You'll usually find the partition info in the ROM thread and then you just edit the flash.cfg file found in your clockwork folder using notepad.

Hi
Thanks a lot for all your help, it made it a lot easier for me to start )
I have now installed
HSPL4> 2.08hspl http://forum.xda-developers.com/show...85&postcount=3
I didnt do this (radio update, since as I understood I already had the right one!!??, Yes the phone is from Denmark)
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
Then I downloaded MGLDR and run the ROMUpdateUtility
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
BUT it say that it may take upto 10 minutes, it take below 1 minute for me... the statusbar at the host computer goes from 0 to 100% fast and the same on the phone and after that the phone restart and show "HTC" in green with white background... then it simply stops.......
What have I done wrong and how can I solve it?!
Thanks in advance for all your input.
Best regards,
Peter

PeterSvendsen said:
Hi
Thanks a lot for all your help, it made it a lot easier for me to start )
I have now installed
HSPL4> 2.08hspl http://forum.xda-developers.com/show...85&postcount=3
I didnt do this (radio update, since as I understood I already had the right one!!??, Yes the phone is from Denmark)
Task 29 http://forum.xda-developers.com/showthread.php?t=644781
Then I downloaded MGLDR and run the ROMUpdateUtility
MGLDR http://forum.xda-developers.com/showthread.php?t=893618
BUT it say that it may take upto 10 minutes, it take below 1 minute for me... the statusbar at the host computer goes from 0 to 100% fast and the same on the phone and after that the phone restart and show "HTC" in green with white background... then it simply stops.......
What have I done wrong and how can I solve it?!
Thanks in advance for all your input.
Best regards,
Peter
Click to expand...
Click to collapse
Sometime wrong radio can cause that issue.
Make sure that the radio is 2.15.xxx.xxx.
Now, you should go into bootloader and try to flash the radio, and then restart doing task 29, flashing MAGLDR.
If you succeed, your phone will automatically bring you into MAGLDR screen.
From there you can flash Android or WP7
Good luck

I now downloaded my "old" radio version 2.15.50.14
http://forum.xda-developers.com/showthread.php?t=611787
It seems to complete.. didnt jump from 0% to 100% in 1 sec..... so thats good
Then the task29 seems to work as well since my ROM is clean!!
BUT agian when I romupdate MGLDR it start and complete very fast... goes from 0 to 100% within a few sec...
http://forum.xda-developers.com/showthread.php?t=893618
and agian stops at the HTC startup screen.....

As extra information I can say that when I try to install MGLDR the RomUpdate state that the current image version is... blank
and that I can install Image Version 2.00.000.0
And then when I start it takes a few sec.....

What OS do you use on your PC? If it's Vista/Windows 7, you may need to run as administrator, if you haven't done so already
Sent from my HTC HD2 using XDA App

I'm using WinXP as OS

I'm using WindowsXP as OS.
I have not had any problem using the programs so far.. so I guess I have all the right rights!
UPDATE:
Can it be a problem with the SD card if there are no connection or a defect card?
I get exactly the same behavior if I remove the SD card from the phone!

PeterSvendsen said:
I'm using WindowsXP as OS.
I have not had any problem using the programs so far.. so I guess I have all the right rights!
UPDATE:
Can it be a problem with the SD card if there are no connection or a defect card?
I get exactly the same behavior if I remove the SD card from the phone!
Click to expand...
Click to collapse
Hmmm...You r flashing MAGLDR 1.13? Try flashing witout ur sd card & sim card present...if dat still doesn't work then try another pc, possibly one with Windows 7 (though it works on xp)...Task 29 always.

Installing WP7 procedure ?

Hello everyone ,
There is a massive amount of info regarding my question , but I could not find a guide which sums it all ,
so a quick question here about the procedure of the installation , I would like to know if I got it all correctly .
Following with a europian HD2 (international) , current rom is stock 1.48.479.1 (71294) , radio 2.12.50.02_2 .
1. Install drivers on the computer .
2. Install HSPL 2.08 (specifically 2.08 ?) via HSPL4 from DFT .
3. Install a radio of my choice - Leo_RADIO_2.15.50.14** . (which should unlock the RAM ? )
4. Install MAGLDR 1.13 .
5. Download a ROM , install a rom through MAGLDR .
I would really appreciate a quick yes or no , would not like to brick it on its second day .
Thank you all ,
Danny.

Got it working perfectly , despite the lack of comments - thanks to all whom being active in the forum .

Sorry mate, you need to remember most of us are all over the planet an we need to sleep
Im gonna click your wee thanks button because you actually bothered to search for it all and found everything
Regarding bricking
Its highly unlikely you will brick it, just dont bugger around with HSPL any more than you need to, by using Magldr and HSPL you have a couple of layers of protection, almost all problems can be fixed if you have access to the tri colour bootloader screen so dont worry
Biggest issue with WP7 is your battery, do not let it run down, if it comes up critical, then turn it off straight away, turn it on again when you can plug it in and save yourself some hassle, if you dont and it doesnt boot to windows without restarting go straight in to magldr and plug in the charger for half hour, the light will not show up. If you keep trying to start it you will drain what little life there is in the battery and then things get a bit more complicated
anyhow, good luck

[Q][HELP!] Cant install MAGLDR

Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!

calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??

ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me

white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.

Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.

ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?

Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%

do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084

Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse

demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!

davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?

either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return

Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)

davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.

your phone turned off??? is your battery dead??

orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?

Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please

You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk

Need some serius help for Leo Bricked!

My Leo start to restart or crash , in the last months, and some time as grafical problem wrong color and flashing some time problem at boot! Now don't boot at all!
first, at the moment of it stop on device was:
HSPL 2.08
CLK and CRW
some CM7 build!
radio 2.13.50.xx version
The Leo was discharged, and i as some trouble to restart it attached to the charger
but finally it boot, then was discharged and never boot up!
I have put to charge but it freeze after some time (botton back light on and red led on if i disconnect to charger) so i have try to charge it on boot screen, tricolor )
I have try after i was charged everything without success !
The only thing i can access is Tricolor boot screen whit HSPL 2.08
when i try to boot only white screen!
Task 29 - fail (270 error) from HD2 toolkit, from task29.exe and from mtty
Flash 1.66 and 3.14 Original HTC ITA rom from SD, fail at radio!
i have try task 2a, task 28 as well task 29. then flash from sd original htc rom, same fail !
Flashing clk, magldr. or HSPL 2 fail!
Custom 6.5 rom, from sd go until finish but on reboot, as usual white screen!
So i have try flashing radio 2.xx.51 and 2.xx.50 but fail at end.
I have also try flashing custom rom, 6.5 and android from pc, but obviously no way!
The only way to remove clk is from sd HTC flash, and is possible is this the problem?
Some one can help me to try recover or understand what is happen to my Leo??
(yes is bricked probably ......but what? )
Thanks

huggy_72 said:
My Leo start to restart or crash , in the last months, and some time as grafical problem wrong color and flashing some time problem at boot! Now don't boot at all!
first, at the moment of it stop on device was:
HSPL 2.08
CLK and CRW
some CM7 build!
radio 2.13.50.xx version
The Leo was discharged, and i as some trouble to restart it attached to the charger
but finally it boot, then was discharged and never boot up!
I have put to charge but it freeze after some time (botton back light on and red led on if i disconnect to charger) so i have try to charge it on boot screen, tricolor )
I have try after i was charged everything without success !
The only thing i can access is Tricolor boot screen whit HSPL 2.08
when i try to boot only white screen!
Task 29 - fail (270 error) from HD2 toolkit, from task29.exe and from mtty
Flash 1.66 and 3.14 Original HTC ITA rom from SD, fail at radio!
i have try task 2a, task 28 as well task 29. then flash from sd original htc rom, same fail !
Flashing clk, magldr. or HSPL 2 fail!
Custom 6.5 rom, from sd go until finish but on reboot, as usual white screen!
So i have try flashing radio 2.xx.51 and 2.xx.50 but fail at end.
I have also try flashing custom rom, 6.5 and android from pc, but obviously no way!
The only way to remove clk is from sd HTC flash, and is possible is this the problem?
Some one can help me to try recover or understand what is happen to my Leo??
(yes is bricked probably ......but what? )
Thanks
Click to expand...
Click to collapse
Please explain to me how this is related to "Android NAND Development" ?
And once that is done, would you like to calm down and use a better translator as from what you just posted above, i seem to make out nothing other than the fact English is not your native language.

All I know is:
- make sure you have the latest OFFICIAL ROM for your device
- flash it via SD
- flashing an original ROM from the SD if you have HSPL and a custom ROM will cause the process to reboot at some point; this is normal, and the update process should continue (you write that it fails on radio, but you didn't mention what exactly happens)
If flashing an original ROM doesn't work, then I'd wager your HD2 is busted.

In what way are you developing for HD2 NAND ROMs? Also, your device is not bricked if you can access the tricolour bootloader. The post above pretty much sums up any useful info I could give.

If your HD2 gives short 7 vibrates, its time for replacement. thats a panic vibrate by the processor. one of your chips is on its way out. this should be connected to temperature as well. keep it cool and without power for few hours, and it mught revive. but just for time being. it might worsen with time.
and please better translator.

Oh please, sorry for my English !
I do my best to try to make me understand!
Here is an International forum and here we all speak English!
have you ever tried to translate from English into Italian? is almost incomprehensible, anyway if someone does it, I try to do everything possible to understand him, and answer !
comfortable life to have all the information in their native language huh?
you know what ?, we Italians are so uncivilized, that where I work in IT department of a large company,
with Indian colleagues, who deal with Unix, we communicate on English! Find the same in other countries.....
Please explain to me how this is related to "Android NAND Development" ?
Click to expand...
Click to collapse
Why you are so rude whit a person that as probably just fried his device!!
Please why ?, and why "TO ME" ? (seems arrogant)
is not enough to say, I don't know how help you, and also probably is not the appropriate section....
And once that is done, would you like to calm down and use a better translator as from what you just posted above, i seem to make out nothing other than the fact English is not your native language.
Click to expand...
Click to collapse
1-Leo don't boot OS
2-Leo go on BootLoader (HSPL2.08)
3-Flash from SD , nbh extracted from original HTC_Leo_update. FAIL!
4-Overwrite HSPL, whit Other HSPL version or respective SPL (2.08) FAIL
5-mtty (bootloader commands) Task 29, Task 28, Task 2a, execute but not solving the problem, maybe is not nand format or bad block related....
Can you please say something different from the fact that Leo does not go?, like spl code to investigate what kind of hardware fault?
Have a good Day
Thanks & Regards
(you write that it fails on radio, but you didn't mention what exactly happens)
Click to expand...
Click to collapse
Yes, just because i don't know, what i can see is a , after the upgrade go to end,
the blue write ,become red ..like this
00018003
LEOIMG.nbh - FAIL
RADIO_V2Fail
Update Terminate
UPDATE FAIL
Same Code ,radio error, when i try to update whit full rom.nbh, so is a radio fault i think!
In what way are you developing for HD2 NAND ROMs? Also, your device is not bricked if you can access the tricolour bootloader. The post above pretty much sums up any useful info I could give.
Click to expand...
Click to collapse
no way is related, and sorry to you too .... my only last beloved device......
PLEASE MODERATOR
IF
the thread is on the WRONG PLACE ,# SORRY
Then
CAN YOU PLEASE move the THREAD, # and forgive me,
Thanks
NOW Can you share your Knowledge!
argue if i can access The SecondProgramLoader device is not bricked!
If your HD2 gives short 7 vibrates, its time for replacement..
Click to expand...
Click to collapse
No my Leo don't gives 7 short vibrates.......

This is not and android problem nor related to development.
You will get more qualified answers if you ask in the right forum.
Its just that simple