Related
Hi Guys and Girls, I hope this is the right place for my question. Sorry if I sound like a 12-year old - my english is not really the best...
I own the Motorola Defy+, and I tried to get rid of motoblur. I installed SndInit 2.0, did a reboot, did a backup, did factory reset, wiped dalvik cache and picked the miui-rom I had previously placed on my SD. The installation went pretty good, my phone told me that it finished the installation and I did another reboot.
After the reboot I get the red M (default Motorola-logo just like before I was meddling around with the phone) but just for a very short period of time and then I get a black screen with white letters (slightly out of proportion) saying:
Bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to Program
Transfer Mode:
USB
When I remove the USB-cable the last two lines are replaced by:
Connect USB
Data Cable
Do you guys have any idea, how I could get MIUI, CM or anything else running on my phone again? I'd even be quite happy to have the stockrom running again, since a phone with ****ty motoblur is still better than no phone at all.
I'd be really grateful for any kind of help, thanks in advance.
The miui you installed was for defy or defy+? And , can you access to recovery?
Motorola Defy CM7 RC 1.5 OC 1GHz
You have forgot to do 2 things. this might be the problem .
Do:
1. Factory reset.
2. wipe data cache.
3. wipe dalvik cache.
4.install MIUI rom.
5. wipe once again data cache.
6. reboot.
If you can access recovery again . my guess you can..
Thank you guys for taking care of me!!
@LeonardoJegigzem
The MIUI is called miui-ger_DEFY_1.12.23_FULL_EN_DE.zip - it's for Defy but I've read in forums that it should run on Defy+ aswell.
@VoLtrex31
I can't access recovery (I'm assuming you're talking about the "push volume-down when blue LED turns on"-recovery?), the screen I described in OP appears right after the red-M shows up for the first time.
You are right, I didn't wipe data cache neither before, nor after the installation.
Thats not good.
Search in the forums for how to access the recovery via your computer..
This might be your only way.
Ask more forums for technical help since xda is not the best forum for asking for help.
because i am not an expert .
But don't worry i bet many people got that problem too so there is a solution .
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
buruss said:
at last you have stock recovery(i think)
to access it (on defy) ress and hold VOL DOWN and power button.
Than after(about 10 sec) you'll get an exclamation mark.
Now press VOL UP and DOWN at the same time and you can wipe data.
If phone boots up perfectly yo can reinstall 2ndinit.
If not.. i think that you have to flash the appropriate sbf via rsd lite.
Click to expand...
Click to collapse
Now that's great news - the folks at motorola seem to know that ppl want to avoid ****ty motoblur and **** up their phones so they built an easy way to rescue broken phones.
I will try that asap - right now I'm using an old sony ericsson Xperia X8 - want my Defy+ back!
Thanks buruss!
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
mikrom.cz said:
Hi guy,I know about what you talking.
1. everytime i stuck on "white letters" i recovered my defy+ with RSDLite and correct SBF file.
2. If you have 2.3.6 version of stock rom,miui or any common cm7 won't work - afaik. You must downgrade (somewhere is topic about it) or use cm7.2 or cm9
Sent from my MB526 using XDA App
Click to expand...
Click to collapse
Yea, I 've been through the same today/yesterday, and after a lot of cursing I can tell you it is exactly like this T.T you have to re-flash the stock ROM 2.3.6 again, and then if you find a way to downgrade/install Miui-CM/basically anything than staying with the stock ROM, let me know! xD
Just relax, I'm telling you this because yesterday I could have killed a dragon with my bare hands, but a soft brick is NP, as long as RSDlite recognizes your phone you can always going back to safety, from what I've learnt hard bricking a Defy is veryveryvery hard, thanks/due to a locked boot loader
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
mikrokosmonaut said:
Hey Guys, first let me thank you! I'm feeling quite happy now knowing that I'm not the only one with this kinda problem and I'll try the RSDlite-rescue-mission in a few days.
Happy new year everybody!
Click to expand...
Click to collapse
I guess it's inevitable, when you start trying this and that custom ROM, sooner or later you're going to screw it up xD but it's actually good when that happens, because you know 100% you can fix everything - you did it once, you'll do it again
Happy new year!
miui uses the 2.2 froyo as base, since all the defy plus have gingerbread miui wont boot, miui hve boot.img and davtree.img in the rom.zip, if you flashan old boot.img in to a newer defy plus with new bootloader(2.3.6) you get an error, ho to fix it, try deleting the boot.img and devtree.img from the zip and replace the 2.3.6 boot.img and devtree.img form 2.3.6 and add it to the zip( miui rom) and try to flash it again and see if it works
You guys are awesome! Phone is booting again
installed RSDlite 5.3.1
downloaded the latest .sbf for my phone and my provider
let RSDlite do its magic and now everything's working just fine.
Next thing to do - try again to get rid of motoblur!
It's not 100% true, I installed MIUI over my 2.3.4 Gingebread and it worked like a charm
Only problem is, I can't install it anymore now that I'm on 2.3.6, but 2.2 is not strictly needed, 2.3.4 worked as well
Hey, guys! I have the exact same problem. I tried to install a Galnet MIUI ROM over at galnetmiui.co.uk, and i messed it up. I didn't really know what i was doing. Perhaps i forgot to wipe cache after installation. Have the exact same error message as mikrokosmonaut.
I was running my mb 256 with android 2.3.6, as far as I know, i have to use RSD Lite to istall stock rom again. Where do I find the correct SBF? My phone was bought without a service provider subscribtion, so I have no clue where to find the right SBF. I have no objection against having blur on the phone.
Can anyone help?
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
daede86 said:
hi guys!!
i've tried to install miui on my defy+ 2.3.6.. like i read on this thread i modified the .zip file changing the boot.img and devtree with the original one.
but mt defy can't boot.. stuck at motorola logo..
what can i do?? does anyone managed to install miui on a defy+ 2.3.6?
now i'm using cyanogen and it works fine, but i prefer miui
thanks!!
Click to expand...
Click to collapse
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
mikrom.cz said:
I don't think MIUI work on 2.3.6. you need CM7.2, or maybe some latest nightly version of MIUI
Click to expand...
Click to collapse
thanks for your reply! indeed i'm using cm 7.2.. it works pretty well, except some delays! never heard about miui nightly! i did a research on google but i couldn't find anything.. any idea??
thanks again!
hi again!
i was thinking.. you said miui shouldn't work on 2.3.6 and i guess you are right! so if i do the same thing i did (change the boot and devtree file in the latest miui.zip that is 2.3.7 if i'm not wrong) but using files from android 2.3.7?
maybe i try to explain myself better..
i make a nandroid backup of my cm 7.s2 which is 2.3.7.
then i change the files boot and devtree from cm 7.2 to the latest miui.
should it work? what do you think?
thanks again
Hi, folks! *GREAT NEWS!*
Some guys over at the devs section on the thread below have found a froyo sbf with bootloader 6 (the same as the defy 2.3.6 sbf)!!! This means we can use it to downgrade to froyo and install MIUI over it!
http://forum.xda-developers.com/showthread.php?t=1486731
I haven't tried it yet, but will flash later today or tomorrow. You should read through some of the posts and decide for yourselves if you want to try or not.
All the best!
-If I managed to help you in any way, please press the thanks button!
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Do you still see the blue led for custom recovery?
Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Hmetool said:
I've just tried upgrading to ICS and failed. Apparently I flashed the wrong kernel - should have flashed the CM7 one, but flashed the CM9.
Now my Defy is stuck on the Google logo and I don't know how to reach recovery mode. Pressing Power+voldown does nothing. Power+volup gives me the bootloader, which asks me to connect a usb cable, but I have no idea what to do after that.
I have two Nandroid backups: one stock (2.2) and another with CM7 (2.3.7). My Defy has a green lens.
Is there any way to restore my phone to one of those backups?
Thanks in advance
Click to expand...
Click to collapse
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
fiskenigaten said:
Do you still see the blue led for custom recovery?
Click to expand...
Click to collapse
I see the blue led, but it goes on to green regardless of what I do (power+voldown does nothing). I've tried to access recovery mode several times, but the phone doesn't respond. Maybe I'm doing something wrong.
rperdue5 said:
You will need to flash a new SBF with RSD lite
follow instructions in this thread
How to flash new SBF
Click to expand...
Click to collapse
I've read the guide, but my original SBF is missing ever since MegaUpload's demise. Is it possible to use the Nandroid backup instead?
Auris 1.6 vvt-i said:
Do not flash any sbf's. Reboot the phone, at the blue led press Vol- and when you get into boot menu, flash the correct kernel. If you flashed Defy build, flash CM7 (Froyo) kernel. If you flashed the Defy+ build, flash CM9 (Bingerbread) kernel.
Click to expand...
Click to collapse
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Hmetool said:
Ok, apparently I wasn't pressing the button at the right time. Recovery mode is now working. However, I don't have the correct kernel in my SD card - only the wrong one.
My Nandroid backup seems not to be working too, apparently. I went into recovery and restored it, but boot still doesn't work. I wiped data/cache/dalvik cache and tried again, but it still didn't work. I'm at a loss here.
Should I try to flash some other sbf, since I can't find my phone's stock one?
Click to expand...
Click to collapse
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
arpith.fbi said:
go to ICS thread and on the first post there is a link to signed CM7 kernel zip..copy it to ur sd card and flash it..
Click to expand...
Click to collapse
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Hmetool said:
I just tried installing the zip from the sdcard, but I got an error message: "Can't make /tmp/update_binary. Installation aborted". It seems that I can't install any zip now.
Is there any way out of that? I'd be more than happy if I could just flash my nandroid backup, even if that means being stuck without ICS for a bit more time.
I'm on ClockworkMod Recovery v2.5.1.8, if that helps.
Click to expand...
Click to collapse
Hi,
I faced a similar issue but it was since I flashed CM9 for Defy in my Defy+ with 2.3.6(stock) ! Nothing was working and I would get some boot errors! I rectified it by flashing full SBF and then rooting. Well if you want I can provide you with the SBF I have but it is for 2.3.6 and so you will loose downgradability. I have 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage with me. However, you can also give Walter's fixed SBF and Nandroid backup a try
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Hmetool said:
Thanks, it turns out that flashing a sbf was a nice way out of this mess. I flashed a 2.2.2 which is almost identical to my stock rom (couldn't find that one).
If I root my phone now, can I still try to restore my nandroid backup? Or should I just skip that and try flashing ICS again?
My SD card has the 03-19 CM9 Nightly, gapps and both CM9 and CM7 signed kernels. Should that suffice? CM7 kernel is the right one for green lens defy, right?
Click to expand...
Click to collapse
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Auris 1.6 vvt-i said:
If you are on a green lensed Defy, then yes - flash CM7 signed kernel and one of the Froyo bulds of Quarx or Epsylon3 - try them all if you wish and see which one you like the most.
Procedure is easy:
1. Full wipe
2. Flash CM7 kernel
3. Flash ROM
4. Flash gapps
5. Full Wipe
6. Reboot
When you decide to try a new ROM, there is no need to flash the kernel again, just wipe, flash the new ROM and gapps and then wipe again.
Click to expand...
Click to collapse
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
One question: by full wipe you mean data/cache/dalvik cache or is there anything else that I'm missing?
Hmetool said:
Thanks, that's great. Are all regular Defy roms Froyo builds unless stated otherwise? I couldn't find that info on the files I have.
Click to expand...
Click to collapse
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Hmetool said:
One question: by full wipe you mean data/cache/dalvik cache
Click to expand...
Click to collapse
Exactly.
Auris 1.6 vvt-i said:
Yes, "Defy build" means Froyo kernel based, "Defy+ build" means GB kernel based.
Exactly.
Click to expand...
Click to collapse
Yep, that's exactly what it is..
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Hmetool said:
I've just rooted my phone again, followed the steps and installed CM9. It worked like a charm. I was pleasantly surprised at how smoothly it runs, didn't expect that sort of quality from a Nightly. Awesome.
Thanks a lot for saving my phone, guys.
Click to expand...
Click to collapse
Sounds great Well since CM9 nightly is still a long way to go, you may want to dual boot CM7 and CM9. Install CM7 as primary and dual boot to CM9.
Guide: http://forum.xda-developers.com/showthread.php?t=1375156
i did the same thing on my defy im a noob and need alor of help.
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
blackhack516 said:
Ok so i had a motorola defy and i wanted to update it to cyanogenmod 7 but it must have been the wrong one and now its stuck on google boot i can't get to my custom recovery screen by pressing volume - and power buttons and if i press volume + i get this black screen asking to plug in the usb to the laptop which i did but i don't know what to do now. i need complete instructions! , iv checked ALOT of forums and tried following this ones instructions, but RSD lite wont download and install like it said it would . and i have no idea how to get tmobile android 2.2 OS for motorola defy. if i could just get that back i would be more then forever greatfull . please someone HELP ! please all be forever in debt to whoever can help me.
Click to expand...
Click to collapse
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
do u have a link?
labsin said:
Try running three setup as administrator. Read all in defy guide. Check the wiki for more guides.
Sent from my MB525 using XDA
Click to expand...
Click to collapse
do u have a link
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Shrewdy said:
Hi,
I was running CM10 on my defy and then i tried to update it with Quarx latest build and something went wrong....i was stuck at the motorola logo screen....
I used RSD Lite V5.3.1 to flash the stock rom to my defy and it still wont boot....its still stuck at the motorola logo....
Please help.....its booting only under the Bootloader mode (Power+Vol Up).....nothing else
Thanks
Click to expand...
Click to collapse
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Please help
pk92 said:
Did you flash the correct sbf?
How long are you stuck at the Motorola logo? Give a bit more information =P
It's most likely not bricked as it's almost impossible to brick the defy.. (I've never heard of it)
Click to expand...
Click to collapse
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Shrewdy said:
Hi,
First i had upgraded to froyo and and used this link to get Gingerbread on my defy
http://forum.xda-developers.com/showthread.php?t=1285007
After that i installed many roms and the last one to be tried was CM10...which started all the problems...
I have now tried to flash rom from this link
http://forum.xda-developers.com/showthread.php?t=1386942
now it is booting up but now it is stuck with the animation screen....the phone actually does not start....
i know its something to do with the kernel but then i dont know which type of kernel to flash and how!!
Please help..
Let me know if you need any more information
Thank you....
Click to expand...
Click to collapse
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Thanks buddy
pk92 said:
Red or Green Lens? Defy or Defy+?
If Red Lens then you can use Defy or Defy+ build straight from Froyo after installing 2nd init.
If Red Lens Defy with Defy+ build, you will need a battery fix
If Red Lens Defy with Defy build, nothing else needs to be installed
If Green Lens Defy, you can only use Defy build. Nothing else needs to be installed.
If Defy+ You can only use defy build, nothing else needs to be installed.
Download the defy/defy+ builds here:
http://forum.xda-developers.com/showthread.php?t=1768702
http://quarx2k.ru
There is also an SBF of CM10 here: http://forum.xda-developers.com/showthread.php?t=1691901
Click to expand...
Click to collapse
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Nothing works
Shrewdy said:
i am downloading the CM10 sbf's for both Froyo and GB..
i will try to install each and will see which ones works for me....
Coz i have a defy and i think it is a red lense one.
But i had a GB kernel running on my defy....
I hope thinks get well with my defy....
Thanks, will update you as soon as something happens....
Click to expand...
Click to collapse
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Shrewdy said:
----------------
All hopes going down... I have flashed these sbf's from the link your provided but nothing works !!
1. Froyo-cm-10,JB.Quarx.30.07.build.Defyred/green.bl4.fixed'sbf NEW
2. A.2.3.6-cm-10,JB.Quarx-30.07build-Defy+/red fixed'sbf cm-10 bootanimation New
Infact i get an error at the bootloader itself Err: A5,70,00,00,23 (wonder whats that)
There is only 1 sbf that boots it up....but then my defy keep looping on the blur animation and never boots up....
SBF that works the most i got it from here
http://forum.xda-developers.com/showthread.php?t=966537
which was (4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage Thread)
This works and atleast it sort of tries to boot up....
Also if i try to get into the recovery mode (Power + Vol Down)....i cannot see any options in recovery....just the small android exclamation image !!
Can you please help and get me atleast booted up till recovery ??
Thanks
Click to expand...
Click to collapse
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Still stuck
pk92 said:
I believe that little android guy is the stock recovery. From what I remember you hold both volume buttons and it takes you into stock recovery.
Unfortunately, you will no longer have 2nd init installed, which allows for CWM recovery, so you can't flash a zip from there.
How long does it stay stuck on the blur logo? Maybe you're just not waiting long enough? (Stupid question I know, but some people complain after 2 minutes, the first boot can take a long time!)
Try looking at This thread and see if the link which is in this post will work to download the Taiwanese SBF. For me it doesn't seem to load
Edit: - Oh the Taiwanese SBF did eventually download. Took about 5 minutes with the tab open loading. I've uploaded it to my Dropbox so you can download from there... should be a bit faster!
JRDNEM_U3_3.4.3-33-1_CHINESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C_USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz
(MD5 - 34E9A43EAB8D2FF6101536C4B3F104BD)
Note: This is Taiwanese, NOT CHINESE. The Chinese one burns out the flashlight and it cannot be used after that.
Click to expand...
Click to collapse
Thanks for helping me out....
The motorola logo stays around for 20 seconds after with the Motorola boot animation starts.....
So i left my defy on for around 20 mins and nothing is happening its still playing the boot animation. !!
I havent yet downloaded the sbf link you have given me as i am at work now and will be able to do that only when i reach home.
Another thing i have noticed is that i am able to charge my defy....that means the rom is present and hopefully working !!
What say....???
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Euro your awesome!!
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
friend request !!
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Shrewdy said:
Hi buddy,
Thanks yaar...i did exactly you told me to and the phone booted normally...
thanks a million buddy...:good::good:
And i also owe a million thanks to pk92...you have been there when i need you the most buddy....:good::good::good:
Thanks...m so happy to see my defy come back to life... :laugh::laugh::laugh::laugh:
O god!! its been a tough time but i learnt something new too....
Thanks guys :laugh:
Click to expand...
Click to collapse
Hehehehehehehehe
You are Welcom Shrewdy
Say thanks to our awesome XDA developer's Because of them we are nothing...
Shrewdy said:
hi, pk92 & euro
i have sent you friend request...do accept if you like !!
Thanks guys...
Click to expand...
Click to collapse
Accepted :highfive:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
sorry didnt get you
czarekusa said:
Guys I have the same problem.
Phone was upgraded from Froyo to CM7 and took it fine. Played for a while in CM7 but decided to upgrade to CM10.
Followed the steps from this thread http://forum.xda-developers.com/showthread.php?t=1795647
flashed foryo Kernel
Flashed CM10-20120924-NIGHTLY-mb525.zip
Flashed Google apps
Cleared cache, cleared Dalvik
Phone boots but gets stuck at Motorola logo and after blue and green light it loops back again to the same sequence.
It's a Defy with green lens and it had stock T-Mobile Froyo (rooted) before flash to CM7.
I'm now back to CM7 as CM10 didn't want to work.
Click to expand...
Click to collapse
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Shrewdy said:
hey buddy...m sorry i didnt quite get you....
As per my understanding i believe your phone is working fine with CM7 installed and you want to install CM10 on your defy !!
am i correct !!
if you then let me make it clear that the latest CM10 build used a custom kernel made by quarx himself....it is not running a froyo or gb kernel...
so here is what you need to do....
1. simply factory reset your phone...clear cache and dalvik...
2. now flash the latest CM10 build
3. again...clear cache and dalvik...
4. and now let defy boot....first boot may take a longer time....
hope this works for u...if it does not...let me know...will b glad to help u...
Thanks
Click to expand...
Click to collapse
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
czarekusa said:
Yes, you are correct. the phone is working fine with CM7.
Factory reset, you mean from boot menu or the hard factory reset with holding volume keys (procedure posted above in this thread)?
The first time I actually tried, I did flash of CM10 without the prior kernel flash and it didn't work either.
so do I need any kernel flash or do I just flash it with CM10 and it should work?
I'll try again later today or tomorrow.
Thanks
Click to expand...
Click to collapse
Lots of us who had bootloops trying to flash CM10 24/09 with a BL5 base SBF solved the problem by flashing a BL6 base Froyo SBF.
But try a factory reset and flashing your stock T-Mobile Froyo first.
If your stock doesn't flash properly then it means you have inadvertently flashed something which updated your BL version to BL5.
I flashed the JDGC_U6.2.13.0 SBF which is BL6 and then I was fine.
Don't use this ROM though, just use it as a stepping-stone to install CM10.
Euro_Rules said:
Have you done Factory Reset????
1- turn off your phone (take the battery out and then put it back in)
2- press and HOLD the volume DOWN button + power button
3- Motorola logo appears first, then after a few seconds an 'android ROBOT logo' appears
4- press volume UP and DOWN buttons at once, quickly
5- from the menu choose 'factory reset/wipe-format data'
6- then do 'wipe cache'
7- then do a reboot
see if it helps and you are able to start the phone normally
Click to expand...
Click to collapse
Thanks a lottt.. :highfive:
Hi everyone,
some time ago I flashed a wrong sbf to my Defy and thanks to the All-in-One Defy Beginner's guide
Zephyrot said:
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Method 1:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup << File is Back, thanks Ichibanme again!>>
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
**NOTE*: I just rephrased the original post since it can be a bit confusing, it is linked as source below.
**NOTE2**: If you are using a non-Chinese defy, DO NOT USE THE CAMERA FLASH while on the Chinese rom, it WILL kill your LED.
Source: ((Original post here))[
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Download this SBF and Flash it.
Root your phone.
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery.
Reboot to CMW recovery, and wipe Data/Cache.
Install CM7 then install Google Apps.
Reboot an go into Stock Recovery (using the vol- button, not from Bootmenu).
Do a Data/Cache Wipe or you won't have any space when you're done.
Flash this Fixed SBF
Reboot into your nice new rom.
Do not Wipe Data anymore or you will have to start again.
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.
Click to expand...
Click to collapse
I'm running CM7 again with a version 5 CG, if I got it right.
So far so good. But now I need to update my ROM to be able to update some apps that won't run on CM7.
So what's the best tactic for updating this messed up phone? Just flashing any CM10+ ROM (I tried several ones) didn't seem to work. I always got stucked at the red Motorola 'M'.
Any ideas?
Thanks a lot!
Cheers,
Martin
smashedup said:
I always got stucked at the red Motorola 'M'
Click to expand...
Click to collapse
factory reset
Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).
smashedup said:
Thanks for your reply.
Besides the fact that I can't go anywhere to do a factory reset as soon as I've updated to something like CM10, I do a lot of resets/wipes on my way to this state (see quoted guide above).
Click to expand...
Click to collapse
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.
hotdog125 said:
Use Defy full wiper/AROMA wiper to wipe system, data and cache with EXT4. Then immediately flash CM10 and gapps.
Click to expand...
Click to collapse
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....
smashedup said:
Tried that, but now I always get a Status 7 error message when trying to install (no matter if I wipe with Aroma or in CWM). I found a lot of people with that same problem but no solution for me... I'm wondering why I did not have that status 7 thing before....
Click to expand...
Click to collapse
For some users flashing DFP-231 helped.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
For some users flashing DFP-231 helped.
Click to expand...
Click to collapse
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
kirov1045 said:
what are the chances it will work? i'll scared i'll totally brick it. it's 100% not a defy+
Click to expand...
Click to collapse
thekguy said:
Zero percent chance of bricking
Only problem is that there may be problems in the stock rom, which can be fixed by installing cm10 or cm10.1
By problem I mean no camera or battery not charging to the full level but again these can be fixed by upgrading to cm10 or 10.1
Click to expand...
Click to collapse
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?
smashedup said:
Thanks for the hint!
But this is a Defy+ sbf and after flashing I might not be able to go back, or not?
From the thread [Q] defy bricked, not even JORDN_U3_97.21.51.sbf helps :
If - for any reason - CM10+ does not work for me, I don't want to deal with these issues...
Or am I getting this wrong?
Click to expand...
Click to collapse
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Sent from my Nexus 7 using Tapatalk
hotdog125 said:
Well, it helped some people. You can't go back to 2.2 after flashing GB.
Click to expand...
Click to collapse
Thanks for clarifying.
But I just decided to not mess around another time and will stick to my well running CM7.2 for this device. I found a workaround for my app-prob anyway.
Thanks again for help!
Hi all
So, I have a problem with my Defy (MB525 green lens). The best will be, if I'll write my full story. Here is it:
Story
I had Defy with CM 10. It had bloated battery. I wasn't using it for 6 months because I have another phone.
Some time ago, I decided, that I'll give Defy to my grandfather. On Tuesday this week I bought new original battery. I put it in the Defy, and charge it. I could boot up my old system as I wrote, CM 10. While it was charging, I detected that I haven't got SD Card. On the other hand, I found some 4GB Samsung SD, which had my father in his Desire. The SD Card had 3 partitions, which I tried to delete, and make only one, with GParted. After I did it, Linux and Windows can't see it. (This is almost other problem, which I'm trying to solve here http://crunchbang.org/forums/viewtopic.php?pid=350683)
But, when I put the CD Card to Defy, in TWRP recovery I could see some strange symbols. I thought, that I can repair something when I wipe SD Card. When the battery charged, I decided to do factory reset and wipe SD card. Here is my first failure. In TWRP I went to custom wipe, and here I marked everything including system and I wiped it. Then I remembered that system is recovery too. TWRP wrote, that everything except SD-Ext and SD was wiped. I known that this will be a problem. Yes, after reboot only Motorola logo without recovery.
I think, there was only one option - flash SBF, which I did. I went to stock bootloader and with sbf flash in Linux, I flashed this:
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
And than this:
CM7RC1.5_16_09_11_custom.sbf
After reboot, I got bootloop. I tried to replace battery, do factory reset but nothing helped. That time I haven't got working card, so I couldn't flash some zip via CWM recovery. Thus, I again flash another SBF, but I don't really remember which. Probably some official CEE Froyo however, I'm not sure.
After that and reboot, I got only black screen with white led lighting while USB was connected. When I wanted to go to stock bootloader, still black screen, but I can flash SBF, and while flashing, screen have brightness and text about flashing.
I knew that this is little hard brick. I again tried to flash other SBF which I have or I downloaded (yes, again I don't know which). One of SBFs which I flashed was some fixed Chinese SBF . That made my defy booting, screen working, but still bootlooping. I couldn't reach any recovery.
Again, I flashed other SBFs, CM's too but nothing worked and I got black screen again.
And this was end of my story.
Current situation
I have Defy (MB525 green lens), with unknown framework an it had only black screen and what only I can do, is break Defy with hammer or flash some SBF.
So, here is list of all SBF files, that I have downloaded and probably tried to flash: (No order)
JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf
CM7RC1.5_16_09_11_custom.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANO2DE_P048_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_177-003_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB03A.0R_PDS03C_USAJRDNFRYORTGB_P019_A010_HWp3_Service1FF.sbf
DFPRC_U_4.5.3-109_DPP-6-7_SIGNED_USADEFYPRCB1B50AA00A.0R_JRDNGIBRRTGC_P025_A019_HWp3a_Service1FF.sbf
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
JORDN_U3_97.21.51.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF.sbf
4.5.1-134-DFP-132-gingerbread-BL6-fixed.sbf
4.5.2-109-DHT-22-gingerbread-BL5-fixed.sbf
3.4.2-177-003-nordic-froyo-fixed.sbf
3.4.2-179-002-tmobile-froyo-fixed.sbf
4.5.1-134-DFP-74-gingerbread-BL5-fixed.sbf
4.5.3-109-DPP-11-gingerbread-BL5-fixed.sbf
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN.sbf
Probably that is all what I have.
I've read many topics with similar problem and guides, but nothing helped me, or SBFs were unavailable.
So, what have I to flash, or which guide to try, if I want working Defy?
Sorry for my not good English
Thanks
UPDATE
sterver1 said:
Wohooo!!
Story
After a long time (4 months)...
Accidentally today I found my favorite custom ROM - MoKee OS, for Defy. I said to myself: "Hm, I have some time... I'll try to flash this MoKee on my Defy and maybe it solve my problem with (not) charging/unknown battery for system."
I picked out box with Defy from drawer, wiped the dust, took the Defy and said: "Sh*t! I haven't got SD Card!" Fortunately I found one. I download MoKee OS zip on that SD Card, put it to Defy, booted to recovery and flash MoKee OS zip. (...with full wipe of course...) Then rebooted to system.
Uselessly. Still unknown battery. "Hmm, It doesn't matter. Maybe here are some new stuffs which can solve my problem." And I continued to finding something, that can solve my problem. After a while I found ROMs with new 3.0 Kernel by Quarx. HERE. I downloaded CM 11 EXPERIMENTAL with this kernel and update recovery and flashed them. I didn't read thread. After reboot system didn't boot up and TWRP was inaccessible. I found why when I read some posts from that thread. HERE. But I couldn't flash that zip via recovery because I couldn't open recovery. So I mount /system to USB from bootloader and added files from zip manually to /system partition. After reboot it jammed on booting up. But TWRP was accessible so I did full wipe and flashed CM 11 EXPERIMENTAL and than that fix zip by @lorcotti. After that it finally booted up and battery was working and charging!
And they all lived happily ever after. :laugh:
SO, If you have some problem as me (unknown battery after flashing GB SBF on MB525), try this:
1. Download recovery and some ROM from [Kernel][GPL] Development 3.0 Kernel and fix from this post.
2. Put all zips on your SD Card.
3. Boot up to recovery.
4. Flash update-recovery.zip.
5. Reboot to recovery.
6. Do full wipe.
7. Flash ROM with 3.0 Kernel.
8. Flash Fix.
9. Wipe cache and dalvik cache.
10. Reboot to system.
If you want, you can flash GAPPS via recovery too.
But this will not be for daily usage! 3.0 Kernel by Quarx have a lot of bugs!
Thanks all!
Click to expand...
Click to collapse
Yeah!
Today I again tried to flash chines SBF. This one: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF.sbf
...and now I have bootable phone . I read many topics again and I got to know how to aces stock recovery. So I made wipe on this chines ROM and I can boot without loop, but I can only do emergency call with SIM it is the same. So, now, I don't know, what have I to do/flash, how to root it and flash here custom rom. Can I use SuperOneClick if it probably haven't got turned on USD Debugging?
Back on black
So, I made sbf file with depacker...
CMG39 from JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FF
and all others from JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF except CMG31.
Than the bootscreen changed from chines logo to grey motorola logo and I got Bootloader (9.00) Error A5,70,39,00,27. After that I flashed another sbf and I got Error A5,70,00,00,23. Than I flashed DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf and now I again have only black screen. F*ck!
I tried to flash my made sbf and chines one (JDGC_U6_2.13.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANAPCNCU_P017_A042_M006_HWp3_Service1FF) too but nothing...
Really here is nobody who can help please??? I want give Defy as Christmas gift. :crying:
OK, so repetition.
What mistakes I've made
1. I wipe wipe all including system partition in TWRP without any flashable zip on SD card.
2. I continued with flashing original SBF, while I have usable CWM.
3. I flashed many no downgradable GB SBFs.
4. I flashed Defy Plus SBF on Defy.
I hope that there is still hope.
Somehow to downgrade, flash only CWM where I can flash nandroid backup or I don't know what else...
a gingerbread sbf should also work on green lens defy as there is no diff. in hw... instead the cam
have you tried a factory reset in stock recovery after sbf flash ?
Sent from my MB526 using xda app-developers app
Now, after all (which I tried) SBFs I get only black screen. I tried many GB SBFs too, but still black screen...
I'm going to try some another Poland SBFs and than if that won't work, I'll try to flash all in Froyo CEE SBF particularly.
Thanks for your response.
Once you've flashed GB stock sbf you can't go back staight to froyo or else
Read the beginners guide and the SBF matrix sektion carefully.. if you haven't...
Sent from my MB526 using xda app-developers app
DFP 231 has been flashed by you, so no froyo sbf will work. Black screen on dfp 231 indicates some eMMC problem, because bl version is highest(no error possible). IMHO only service centre can disable bl check or replace the main board to fix the problem
The problem should have been solved at the boot loop issue by wiping from stock recovery, no network solved by baseband/radio fixes. Check the rsdlite log file to confirm checksum/access errors. I think that the custom sbf somehow messed up either eMMC or efuse(less likely, unheard of).
For sdcard error wipe everything using hdd llf. If any error persists it's a hardware issue
Sent from my MB526 using Tapatalk 4
@bone101
I know, I read it few times, and I know how it is (not) working. But, after all GB SBFs I got only black screen, so maybe were not correctly flashed... I'm using Linux and here is sbf_flash for flashing SBFs, and in it I can't view informations about phone as in RSD Lite... But maybe, it will work in wine..
Do you now, that if I flashed GB SBF, I have to flash another GB to solve my problem, because no Froyo will work?
@thekguy
I know how I can solve others problems. Only what I need help to solve is black screen.
Can't I flash something which support that high BL or it won't work?
check if you get into Bl. modus
press vol. up & then power button
tell what you see
Sent from my MB526 using xda app-developers app
That's what I'm saying, the black screen problem occurs due to bl version mostly, and you have highest bl, so in theory black screen is impossible. Unfortunately I have never seen in this forum any defy recovering from black screen after flashing dfp231. Check rsd log from windows if possible. Froyo sbf cannot work under any circumstance. You must flash only gb sbf
Sent from my MB526 using Tapatalk 4
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x000910
DRM Version: N / A
AP Die ID: 173002052f066b010000dcff0200
BP Die ID: 0000000000000000000000000000
AP Public ID: d0d8842b4879dd27b9eb94f970fbeec252fcb2f4
BP Public ID: 0000000000000000000000000000000000000000
Click to expand...
Click to collapse
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
sterver1 said:
@bone101
When I acess bootloader I have only black screen... While flashing I can see
"SW Update
In progress.."
Ok, I have Windows notebook available... Here are device properites from RSD Lite:
I'm going to try some GB SBFs here...
WOHOOO I've got it! I flashed 231_GR_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf and now I have got bootable phone... I'm in the system. I'm going to root it and flash CWM and MIUI if it will work.
Really thanks for your help!
Click to expand...
Click to collapse
I'm stuck in same problem, downloading this sbf you mention before, hope it works. Fu^kin defy, it sucks
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
Method 2: (BIG thanks to Jebrew again for this one)
NOTE: You are going to need CM7 for this one. CM7 Stable version recommended.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=1216982
DOWNGRADE
If you come from Android 2.1 and never flashed Android 2.2 you can use the fixed sbf-files method. With this method you will have a option to downgrade to you personal stock Android 2.1 via direct sbf flash.
Click to expand...
Click to collapse
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
It will only work if you never flashed a Android 2.3.6 full sbf.
Click to expand...
Click to collapse
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
have you tried cm11 ?
or ms2ginger by walter79
Sent from my MB526 using xda app-developers app
sterver1 said:
@Alejandrissimo
Good luck...
Click to expand...
Click to collapse
Working and rooted, thanks for your help
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
please see your PN
sterver1 said:
@Alejandrissimo
Good luck...
I have another problem. Now, I have GB kernel. In original 2.3.6 GB on MB525 green camera don't work, and battery too. So, I thought that, when I flash Froyo kernel (CM) and CM7 I got back Froyo kernel and working camera and battery. Yes, this was not possible. After I did it and rebooted it I got Bootloader error. I flashed DFP-231 again. Worked.
Than I tried restore Froyo from nandroid which I found something here on forum. Than I flashed CM7 and bootloader error again.
Now I have CM7 by Maniac for defy plus which worked well except camera and battery... I know that here are many topics about downgrading, camera fixing and others but all which I read are bad in something for me...
Here are some options what I found but I don't know if I can use one:
from http://forum.xda-developers.com/showthread.php?t=1216982
from http://forum.xda-developers.com/showthread.php?t=966537 but I'v ever flashed Android 2.2.
Or http://forum.xda-developers.com/showthread.php?t=1465436 ... This is better option but I have flashed full 2.3.6 SBF and here is:
So, how can I downgrade or repair battery and camera? I don't care whether I have got GB or Froyo kernel if I have working camera and battery.
Click to expand...
Click to collapse
Congrats man! Seems that rsdlite on Windows is the most reliable solution. Now to fix everything just flash cm10 (jelly bean) or later rom. It includes fixes for camera and battery
Again, no downgrading bl(not even jtag will work)
Sent from my MB526 using Tapatalk 4
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Alejandrissimo said:
Working and rooted, thanks for your help
Click to expand...
Click to collapse
Hehe, I'm glad...
sterver1 said:
Oh, ok. I'll try it. Thanks.
Hmm, and than, can I flash CM7 by Maniac or JB/GB WIUI and fixes in CM10 will still working?
Ms2ginger is not good for me because it haven't got slovak language. I'll give defy to my grandfather.
//And now, in Quarx CM 10 my battery don't charge. I tried 2 chargers and charging via USB too.
In options, battery is still "60% - Unknown"
Hehe, I'm glad...
Click to expand...
Click to collapse
There's a cm7 2ndboot build which should work for you. Try cm10.1 or above, problem should be solved.
JB wiui includes those fixes, as does cm7 2ndboot. I don't think that wiui GB has them. I would personally go for cm10.1 or above
Sent from my MB526 using Tapatalk 4