Hello, i'm a big problem for my motorola milestone 2 A953, I apologize for my language and my mistakes.
Hello, I recently purchased from eBay Milestone 2 has an English menu and is purchased in the UK, I wanted to upload to the new software CM9 best unless it can not be CM7, and right now I have a problem namely
I have bootloader 70.13, upload the file to the memory card from the CM9 and GAPPS bootloader fires (up arrow + power) via USB to the PC turn on RSD lite version 5.x choose the file with the extension *. SBF and then kicks me out of 100% and I turned on the phone once again turn to the new bootloader and shows the pass. My next step holds the power and turn off phone and then I hit 'x' + power and shows me a screen with an exclamation point in a triangle and android humanoids press volume + camera and then a magnifying glass on the keyboard and nothing happens no fires are no menu is the same I'll do it but as I press the @ button on the keyboard or anything, no menu: (
I did everything the instructions that I found on forum
http://forum.xda-developers.com/show....php?t=1338183
1) Install Bootstrap Recovery Droid2
2) Boot into recovery
3) OPTIONALLY: create a backup of your data
4) Choose Install zip from sdcard -> Choose zip from sdcard and select downloaded ZIP file.
5) OPTIONALLY: install Google Apps the same way
6) Wipe data / factory reset
7) Wipe cache partition
8) Reboot and enjoy
9) OPTIONALLY: use attached Baseband app switcher if you have troubles with phone signal.
all worked out, but when I went passed the phone rebote motorola logo and nothing else happens. I do not know how to solve this problem.
I can not run the recovery menu. I can only enter the bootloader version is 70.13.
I would like to upload the software from the Polish language.
Thanks for help.
lukasz0318 said:
Hello, i'm a big problem for my motorola milestone 2 A953, I apologize for my language and my mistakes.
Hello, I recently purchased from eBay Milestone 2 has an English menu and is purchased in the UK, I wanted to upload to the new software CM9 best unless it can not be CM7, and right now I have a problem namely
I have bootloader 70.13, upload the file to the memory card from the CM9 and GAPPS bootloader fires (up arrow + power) via USB to the PC turn on RSD lite version 5.x choose the file with the extension *. SBF and then kicks me out of 100% and I turned on the phone once again turn to the new bootloader and shows the pass. My next step holds the power and turn off phone and then I hit 'x' + power and shows me a screen with an exclamation point in a triangle and android humanoids press volume + camera and then a magnifying glass on the keyboard and nothing happens no fires are no menu is the same I'll do it but as I press the @ button on the keyboard or anything, no menu: (
I did everything the instructions that I found on forum
http://forum.xda-developers.com/show....php?t=1338183
1) Install Bootstrap Recovery Droid2
2) Boot into recovery
3) OPTIONALLY: create a backup of your data
4) Choose Install zip from sdcard -> Choose zip from sdcard and select downloaded ZIP file.
5) OPTIONALLY: install Google Apps the same way
6) Wipe data / factory reset
7) Wipe cache partition
8) Reboot and enjoy
9) OPTIONALLY: use attached Baseband app switcher if you have troubles with phone signal.
all worked out, but when I went passed the phone rebote motorola logo and nothing else happens. I do not know how to solve this problem.
I can not run the recovery menu. I can only enter the bootloader version is 70.13.
I would like to upload the software from the Polish language.
Thanks for help.
Click to expand...
Click to collapse
From the bootloader you can flash the original firmware again and get your phone back to life.
Get your firmware from here: http://sbf.droid-developers.org/umts_milestone2/list.php
Keep in mind that you need to have a fully charged battery before flashing, and you can only flash a firmware that is the same version or newer that the original in the phone (newer is always better)
Work?
Enviado de meu MotoA953 usando o Tapatalk 2
[BRA] Giovani said:
Work?
Enviado de meu MotoA953 usando o Tapatalk 2
Click to expand...
Click to collapse
it works, I've done first so I have uploaded the rds lite software on this page sbf.system-ready.org/umts_milestone2/?C=M;O= D Unfortunately, it was the android version 2.3.6 but went to decorate it root, then I have uploaded to the sD card CM9 with google alikacjami droid2bootstap installed and I have uploaded to the card-v2 Bootmenu_v0.8.6 phone then ran again and continue with bootmenu it's instructions. works great thanks for your help. :good:
Same problem for me: would appreciate help
Hello !
It seems like I am having the same problem as lukasz0318, but I don't know how to solve it, even based on what has been said before. That's why I am posting here.
To summarize it : I am not able to boot into Recovery Mode anymore on my Milestone 2, so my phone is soft-bricked. I am able to boot into Bootloader Mode.
I already posted my problem on the Android StackExchange (android.stackexchange.com/questions/27553/how-do-i-enter-recovery-mode-on-my-motorola-droid-2-global-to-unbrick-it), but as I have had no answer there in 8 days, I suppose XDA-Developers will be a more appropriate forum. Anyway, let me recap the problem. Hold on, since it is quite an explanation. You may jump to the last paragraph.
I own a Motorola Droid 2 Global, also called Milestone 2. It used to have Android 2.3 with Motoblur middleware. I don't know what firmware version it had, but it was updated earlier this year by the manufacturer. I bought my phone in France independently from any phone carrier (so it was not bought from Verizon for instance). I rooted it, installed ROM Manager, Droid 2 Global Recovery Bootstrap and ClockworkMode Recovery. From ROM Manager, I could successfully reboot my phone into Recovery mode, allowing me to back-up my data for instance. Until this stage everything went fine.
What lead to my problem : I also wiped the cache and installed CyanogenMod 7.2 and the Google apps from ZIP files and from the Recovery Mode interface. But now my phone is broken. When it now boots, it shows the stylised M logo, but then switches to an entire black screen. The phone is still on so I have to pull the battery to shut it down.
I would like to reboot into Recovery Mode but this doesn't work : I am never able to see the Recovery Mode logo (a warning sign with a little android). How should I do it ?
What I have tried : I tried to boot while holding the Power and the 'X' button, as adviced on different forums. This still leads to the black screen. At this state, pressing the Search hardware button does nothing. Holding the Power and the Volume Up button has no more effect. I am able to enter Bootloader Mode by holding Power and Up Arrow. Procedure suggested by Verizon
I also tried to use a Slitaz live CD with ezSBF on it, that I*downloaded from www droidforums net/forum/droid-2-global-hacks/170060-tool-ezsbf-d2g.html#post1726853. But I get errors in the process and then my phone reboots in Bootloader mode and shows the following error:
Code:
Critical Error:
FEBE 0047
After that I still cannot get to Recovery Mode.
I also took a look at Caesarivs' link (sbf.droid-developers.org/umts_milestone2/list.php) but I don't know which SBF to pick and I don't understand lukasz0318's answer to it. Which is a pity since the link was successful to him.
Could you please give me some details on the procedure to follow ? Additionaly, could you post me a link to your favorite and up-to-date tutorial on how to restore the Recovery Mode ?
Thank you very much !
1) A Milestone 2 is not the same as the D2G. If you bought your phone in france, its a Milestone 2.
2) You flashed the ZIPs on moto's recovery, not ClockworkMod recovery.
Try this:
1) Flash this SBF: http://sbf.droid-developers.org/umt...MILE2GBRTFR_P012_A006_HWp2a_Service1FF.sbf.gz You can flash it with RSDLite on windows or sbf_flash in linux.
2) Root it with Doomlord's one click root.
3) Download droid2bootstrap (NOT the global one) bootstrap recovery, and flash bootmenu (attached to this post)
4)Reboot once normally, reboot again, and press the volume down key when the LED flashes blue.
5) Flash CM7.2, the google apps, wipe data/factory reset.
6) Fix baseband (if you have problems with 3G or signal) with Milestone2 Baseband switcher v2: http://forum.xda-developers.com/showpost.php?p=29580375&postcount=696
Hope it helps you :good:
Lean946 said:
1) A Milestone 2 is not the same as the D2G. If you bought your phone in France, its a Milestone 2.
2) You flashed the ZIPs on moto's recovery, not ClockworkMod recovery.
Try this:
1) Flash this SBF: sbf.droid-developers.org/umts_milestone2/MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTFR_P012_A006_HWp2a_Service1FF.sbf.gz You can flash it with RSDLite on windows or sbf_flash in linux.
Click to expand...
Click to collapse
Thank you very much, Lean946. I didn't know there was a difference between Milestone 2 and Droid 2 Global. My mistake.
As I use Ubuntu 12.04, I tried to use sbf_flash but this brought up an error:
Code:
SBF FLASH 1.23 (mbm)
opticaldelusion.org
=== MILS2_U6_4.1-22_SIGNED_UCAMILESTONE2B1B80E1014.0R_USXMILE2GBRTFR_P012_A006_HWp2a_Service1FF.sbf ===
Index[1]: Unexpected chip 32
Index[2]: Unexpected chip 32
Index[3]: Unexpected chip 32
Index[4]: Unexpected chip 32
Index[5]: Unexpected chip 32
Index[6]: Unexpected chip 32
Index[7]: Unexpected chip 32
Index[8]: Unexpected chip 32
Index[9]: Unexpected chip 32
Index[10]: Unexpected chip 32
Index[11]: Unexpected chip 32
Index[12]: Unexpected chip 32
Index[13]: Unexpected chip 32
00: RDL03 0x82000000-0x8204CFFF F8E4 AP
01: CG31 0xB0280000-0xB02847FF 9EAD AP
02: CG32 0xC7B00000-0xC7B207FF 65A6 AP
03: CG33 0xB2100000-0xB2EC07FF 437B AP
04: CG34 0xB0700000-0xB07047FF 46C7 AP
05: CG35 0xB1100000-0xB18FFFFF 27C9 AP
06: CG39 0xB3400000-0xC7AC07FF 097D AP
07: CG42 0xB0800000-0xB083FFFF AC60 AP
08: CG45 0xB0C00000-0xB0F007FF 2254 AP
09: CG47 0xB1900000-0xB20FFFFF 0EAB AP
10: CG61 0xB0B00000-0xB0B7FFFF 87CD AP
11: CG64 0xB0000000-0xB00047FF 0841 AP
12: CG65 0xB0180000-0xB01847FF 130F AP
13: CG66 0xD4400000-0xE43FFFFF BB26 AP
>> waiting for phone: Connected.
>> uploading RDL03: 100.0%
-- OK
>> verifying ramloader
-- OK
>> executing ramloader
-- OK
>> waiting for phone: Connected.
>> sending erase
-- OK
>> uploading CG31: 100.0%
-- OK
>> uploading CG32: 100.0%
-- OK
>> uploading CG33: 11.8%usb_bulk_read 0
!! unexpected response
-- ACK ADDR
RX ADDR B22A0000A7 B22A0000A7
>> uploading CG33: failed at b22a0000/b2ec0800
!! failed
>> rebooting
usb_bulk_read 0
My phone now shows the Bootloader Mode with
Code:
SW Update
In progress…
It has been so for several minutes. I'll wait a little longer and if there is positive evolution I will edit my post.
Anyway, is this the expected behavior*?
I'd try waiting a few more minutes, if sbf_flash is still frozen, try unplugging and pulling the battery out and trying again, if it still won't work i'd take it to a windows pc, I never had any issues flashing with RSD, and I tried Milestones, Milestone 2s and Defy's.
Good luck.
Lean946 said:
I'd try waiting a few more minutes, if sbf_flash is still frozen, try unplugging and pulling the battery out and trying again, if it still won't work i'd take it to a windows pc, I never had any issues flashing with RSD, and I tried Milestones, Milestone 2s and Defy's.
Good luck.
Click to expand...
Click to collapse
Thank you very much ! I found a Microsoft Windows machine, found a download of RSD Lite (which was not very easy) and finally installed the SBF you pointed at. It worked very well to unbrick my phone ! It is now back to Motorola's ROM.
I will now try your following points in order to install CyanogenMod. Whether everything works fine or not, I will post an update.
Lean946 said:
1) A Milestone 2 is not the same as the D2G. If you bought your phone in france, its a Milestone 2.
2) You flashed the ZIPs on moto's recovery, not ClockworkMod recovery.
Try this:
1) Flash the right SBF. You can flash it with RSDLite on windows or sbf_flash in linux.
2) Root it with Doomlord's one click root.
3) Download droid2bootstrap (NOT the global one) bootstrap recovery, and flash bootmenu (attached to this post)
4)Reboot once normally, reboot again, and press the volume down key when the LED flashes blue.
5) Flash CM7.2, the google apps, wipe data/factory reset.
6) Fix baseband (if you have problems with 3G or signal) with Milestone2 Baseband switcher v2
Hope it helps you :good:
Click to expand...
Click to collapse
I think I did exactly what was indicated here: step 1 to successfully unbrick the phone, then step 2 to 4.
Step 4 lead me to an interface called "Android Bootmenu" (different from the Bootloader Mode). From there I could not flash any ZIP, but I could launch the Custom Recovery. In my case, ClockworkMod Recovery. From there I wiped data/factory reset, then I flashed CM7.2 and the Google Apps, and rebooted.
But now my phone doesn't boot properly anymore. The stylized M logo keeps appearing and disappearing. As the LED regularly becomes blue, I can enter the Android Bootmenu, and then the two Recoveries (ClockworkMod Recovery and Android Stock Recovery).
What should I do now to finish the install of CM7.2 ?
Might the reason be that I installed the wrong ROM (or the wrong Gapps) ?
I tried the following ROMS :
cm-7.2.0-droid2we.zip from get.cm/?device=droid2we&type=stable
cm-7.2.0-umts_sholes.zip from github.com/nadlabak/android/downloads
The first one gave me no error output during its installation in ClockworkMod Recovery.
The second one gave me an error :
Code:
E:Error in /sdcard/update.zip - (Status 7)
.
Do you have any suggestion or a link to your favorite tutorial ?
Finally, the following ROM did work, with the same procedure as I used to do :
CM9-NIGHTLY-120815-milestone2-eu.zip from forum.xda-developers.com/showthread.php?t=1623385
I ran into another final small problem (I could not close the Setup Wizard), but that was easily solved with the "Four corners method".
Thank you for your help and wish me good luck on my new operating system !
Hello,
I read a lot of threads but I'm really tuck...
When I power on my Acer Iconia A500, I have this error message : "Secure boot: image LNX checksum fail!"
According to my research, the issue is the bootloader. So I want to update (change) this.
When I power on my tablet in recovery mod I don't have this error. My recovery it's TWRP v2.4.4.0 (Team Win Recovery Project).
I have not my CPUID, so I downloaded Afterota and install the official driver Acer.
But when I plug my tablet, second step "Usb Connection" I have this issue : ERROR - connect usb cable and enable usb debugging"
But I can't enable usb debugging because my ROM is fail...
I hope somebody can help me because I have no idea
Try flash thor cwm 1.7.3 via cwm, then get the cwm recovery in, flash flashable zip bootloader v8,hope this help
Sent from my HTC Desire VC
tibeoh said:
Hello,
I read a lot of treads but I'm really tuck...
When I power on my Acer Iconia A500, I have this error message : "Secure boot: image LNX checksum fail!"
Click to expand...
Click to collapse
Depends what rom you were running when all this started....
enter recovery mode advanced menu and choose fix checksums!
According to my research, the issue is the bootloader. So I want to update (change) this.
Click to expand...
Click to collapse
Again, this depends on the rom u had...
When I power on my tablet in recovery mod I don't have this error. My recovery it's TWRP v2.4.4.0 (Team Win Recovery Project).
Click to expand...
Click to collapse
If you do have recovery mode then a) go in and format data and cache,
b) flash custom ics/jb rom....
c) It will show you your cpuid....
I have not my CPUID, so I downloaded Afterota and install the official driver Acer.
But when I plug my tablet, second step "Usb Connection" I have this issue : ERROR - connect usb cable and enable usb debugging"
But I can't enable usb debugging because my ROM is fail...
Click to expand...
Click to collapse
You can only use afterota IF your rom was a stock ics updated via OTA...was yours????
Sent from my GT-I9300 using Tapatalk 4 Beta
Thank you for your answers.
But now I have any access to my recovery mode...
I have the same error: "Secure boot: image SOS checksum fail!"
My tablet is not detect on my PC.
I install pilots (source Acer website) but impossible to detect it.
Have you got an idea ? I follow this thread : http://forum.xda-developers.com/showthread.php?t=1129873
And when @sc2k say : "Send me a PM with your UID and a link to "mmcblk0_start" no answer... And I don't now that he wants to do with this.
I'm really lost... Thank
Oh right....did u get yr cpuid???
Go to the root guide in my sig and download timmydeans v4...run that snd see if you have better luck
Sent from my GT-I9300 using Tapatalk 4 Beta
I have the same problem. Did you find a solution?
i installed cm 10.1 but gapps 10 and..
I have followed all the steps correctly. Now the reboot is complete and the screen is stuck at "unfortunately the process com.google.process.gapps has stopped" error. If I click okay I get another error "Unfortunately, setup wizard has stopped". Please help. this is urgent. i cant do anything on my phone now.
I tried with KDZ but usb debugging is not on and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me
AleexM said:
I tried with KDZ but usb debugging is not on and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me
Click to expand...
Click to collapse
If you want to flsh it via KDZ then just take out battery hold vol+ button and connect to USB. You will see yellow screen and then try to flash.
kristijan505 said:
If you want to flsh it via KDZ then just take out battery hold vol+ button and connect to USB. You will see yellow screen and then try to flash.
Click to expand...
Click to collapse
thanks man,but now the phone is blocked on lg logo when phone is starting :[
AleexM said:
thanks man,but now the phone is blocked on lg logo when phone is starting :[
Click to expand...
Click to collapse
go download mode, vol+ and - and plug in the usb cable which is already connected to your pc, and flash the kfz file
ps : you got this problem because i think you installed gapps from 4.1.2 and cm10.1 is 4.2.2, i did the same mistake
Sabyn said:
go download mode, vol+ and - and plug in the usb cable which is already connected to your pc, and flash the kfz file
ps : you got this problem because i think you installed gapps from 4.1.2 and cm10.1 is 4.2.2, i did the same mistake
Click to expand...
Click to collapse
i will try now,thanks
edit:solved.thanks Sabyn.
what is download mode and how do you get there?
eshantv said:
what is download mode and how do you get there?
Click to expand...
Click to collapse
try it with combo: vol + , vol - and power button
This is similar but not same http://forum.xda-developers.com/showthread.php?t=2088427 BK201EKY' s guide
the difference you will get the non-touched latest stock rom rooted and cwm recovery enabled.
(this means no visual and other modifications, pure stock rom & rooted & cwm installed)
What we need?
1. Latest stock rom "P1010KPO_P1010XEUKPO_HOME.tar.md5"
Download from : http://www.sammobile.com
2. Root and CWM for KPI Rom "madteam-cwm-p1010-kpi.tar"
Download from madteam: http://sourceforge.net/projects/jbro...i.tar/download
3. Wifi Fix for KPO rom "wifi.zip"
Download form: https://www.dropbox.com/s/n69ulrcts1h7ue2/wifi.zip
(This file need to be pasted to fix Wifi error after the madteam-cwm-p1010-kpi.tar flashed on KPO ROM - how to explained in the step)
4. Odin and USB drivers if you need
For odin: http://sourceforge.net/projects/jbro...1.zip/download
For USB drivers: http://hotfile.com/dl/133929348/9107...300_0.zip.html
Steps:
1. Flash the latest KPO rom with odin.
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the "P1010KPO_P1010XEUKPO_HOME.tar.md5 file then click start and wait for the tablet boots and home screen shows
2. Download and install es file manager from play store
3. Create a folder Extract the wifi zip into a sd-card then instert the card to your tablet (or use internal memory)
4. Flashing the KPI rooted kernel and CWM
-Turn off tablet and turn it on while volume key is down. (Download mode) then Connect to your computers usb port
- run odin exe see the yellow com port (if not load the usb drivers first and if you have kies installed disable or uninstall it before)
- uncheck te reparitition only only auto restart and f. reset time is checked
- click to the pda buton and slect the madteam-cwm-p1010-kpi.tar file then click start and wait for the tablet boots and home screen shows
5. Run ES file manager and get the root access, (get the RW access "/" and "/system" )
6. Copy& paste the extracted files in step 3 to te /system/etc/wifi (replace files when asked)
7. reboot your tablet and now you have non touched stock rom, rooted, cwm installed and wifi error fixed.
if duplicated sorry. İ searched but not found a root methot for the KPO rom without any modifications, then found the non-english sites for the wifi.zip trick and it worked for me then i want to share.... :good:
Xposed framework for GB devices can be found here --> http://forum.xda-developers.com/showpost.php?p=44034334
Earlier it was running on custom rom then i tried to install stock rom on my device moto g4 plus...nd i successfully installed it....later an update came and as soon as phone dowoaded update nd gone to reboot doesn't turn on after that...nothing of the screen ..only charging led blinking .....nd today i tried to do blankflash nd it was successful nd something showed up on the screen for the first time
it has these options :
start
restart bootloader
recovery mode
power off
factory
barcodes
bp tools
qcom
bootloader logs
switch tools mode
when i select recovery mode..it shows up this:
------------------------------------------------------------------
Startup failed :
your device didnt start up succesfully.
use the software repair assistant on computer to repair your device.
Ap Fastboot Mode(secure)
Fastboot Reason: Failed to intialise storage partition table
ERROR : No bootaimage found . skip to fastboot
boot up failed.
---------------------------------------------------------------------
please help me through this...i want to install stock android on my phone
Try this guide https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Your device's memory seems to be corrupted, so it doesn't recognize a recovery being present. As pointed out above, go back to Fastboot, and install the latest stock ROM.