As the topic states, I can't get the drivers installed for my XOOM to be properly recognized by my PC so I can copy to/from. When I plug it in my PC I get a popup bubble on my system (Win 7 64 bit) that says unrecognized device. In device manager it's listed as Unknown Device. I've tried with debugging enabled and disabled just to see, same issue.
I've used USBDView to view the currently installed USB devices and removed as much as I could, installed the latest drivers and no matter what same thing happens.
Any suggestions would be greatly appreciated.
**EDIT**
It would seem that I have 2 bad USB ports. Once I tried another port, TADA, my XOOM was happy.
Mods, if you want you can even delete this.
hey guys, i have problem when i plug my magic into my laptop..
it always said "usb not recognized"
i use windows 7 32-bit
i have tried to install android-usb driver but windows system can't detect the driver (android_usb.inf, androidusb.sys, androidusb86.cat, WdfCoInstaller01005.dll)
i try to change the usb cable but still doesn't work
what should i do?
Tried installing HTC sync? That usually fixes the driver problems.
Either that, or try installing HTC Sync AND THEN the USB Driver cable. That worked for me, or try the newest HTC Sync available.
WHere can I install HTC Sync from? I'm having the same issue's, I never had this problem before..
so after installing HTC Sync I'm still havng the same issue, this is the message I'm getting..
"One of the USB Divices attached to this computer has malfunctioned, and windows does not recognize it." any suggestions?
nooty90 said:
hey guys, i have problem when i plug my magic into my laptop..
it always said "usb not recognized"
i use windows 7 32-bit
i have tried to install android-usb driver but windows system can't detect the driver (android_usb.inf, androidusb.sys, androidusb86.cat, WdfCoInstaller01005.dll)
i try to change the usb cable but still doesn't work
what should i do?
Click to expand...
Click to collapse
I have the same problem. Both my windows 7 pc and linux netbook both used to display the magic as a mass storage device (all I need), but now neither will do it. As both fail to detect the magic I've come to he conclusion there is something missing or corrupted on the magic - probably after me pulling the usb cable too soon!
I've reinstalled the rom, ticked usb debugging etc, yet still no joy. The pc initially gave an error code 43, but now it does nothing. could somebody help please.
DML08 said:
so after installing HTC Sync I'm still havng the same issue, this is the message I'm getting..
"One of the USB Divices attached to this computer has malfunctioned, and windows does not recognize it." any suggestions?
Click to expand...
Click to collapse
I tried two htc syncs, neither worked. Thats why I think its an issue related to the phone rather than the pc. Is it related to unmounting the sd/not unmounting the sd at the appropriate/inappropriate time??
All I get is:
usb not recognised - One of the USB Divices attached to this computer has malfunctioned, and windows does not recognize it..... then when i click on the attached usb info it states ' Windows has stopped this device because it has reported problems. (Code 43)'
i already haved this issue its hardware issue sendit to warranty
hey guys.
i've been using the xoom for about 3 weeks now. i have the latest motohelper driver. i'm using windows 7 x64. i've been able to access and transfer files before no problem. I rooted over a week ago and also have had no problems moving files around. accessing the sd card from the pc has also worked.
now yesterday I send my wife to move a file over, and she tells me it's not working. sure enough, no matter which usb port on the pc I plug it into, or how i disconnect and reconnect the cable on the xoom, windows gives me the USB device not recognized message.
I've tried rebooting both the PC and the Xoom. i've reinstalled the drivers. i've enabled and disabled usb debugging on the xoom. still get the same message. under device manager it shows as Unknown Device. if I go and manually select the Motorola MTP drivers it tells me it can't start the device.
we haven't done any recent software changes on the PC or the Xoom. specially not within the last two days for it to go from plugging in just fine to USB Device Not Recognized.
any suggestions?
thanks.
I did a factory restore and I downloaded KFU to try to root my kindle fire. I used the USB driver installer that comes with the KFU and now my computer no longer recognizes the kindle fire. It does make a sound when I plug it into my computer but the hard drive doesn't show up anymore. I've tested it with different cables with same result. Any suggestions?
If youre hearing the sound the computer sees a device but probably doesnt know what you have connected. Is it listed in device manager as "unknown device"? Seems like your drivers did not install properly (I'm assuming your kindle boots up properly just isn't recognized by the PC)
http://forum.xda-developers.com/showpost.php?p=23747671&postcount=2
Possible Solution
degenerazn said:
I did a factory restore and I downloaded KFU to try to root my kindle fire. I used the USB driver installer that comes with the KFU and now my computer no longer recognizes the kindle fire. It does make a sound when I plug it into my computer but the hard drive doesn't show up anymore. I've tested it with different cables with same result. Any suggestions?
Click to expand...
Click to collapse
Please download the Kindle Fire Utitlity
What you need to do is extract and navigate to a batch file that is called install_drivers. This will reinstall the drivers for you and make it possible to see the kindle when you run the adb command
Here is the link for KFU
http://forum.xda-developers.com/showthread.php?t=1399889
___________________________
Kindle Fire - MoDaCo ROM
Helo all,
since two days I now own an Thinkpad Tablet and am happy so far. Only when ein plug it into my PC (Win7 64bit) via USB it is recognized but I still can't transfer files. When I open MyComputer in the Explorer on the PC I ca see the Tablet, click on it but then no files on the tablet show and I also cant transfer any. It then gives me an error: Device was disconnected or istn working properly.
Tried installin ADB Drivers form Lenovo, switching USB debugging off and on, no help.
When I plug it in on the tablet im prompted with the selection of just charging or MTP. If I choose MTP it makes the same Windows sound as if unplugged....
Any Ideas?
thanks
Bambihunter