Database Users

Wizard loosing stylus - total solution ;-)

Sorry, only in czech language yet, because I have no time to translate it yet. Maybe pictures will helps you understandt it little bit.
http://www.ce4you.cz/articles/detail.asp?a=263

I couldn't understand what's the point. Can you explain shortly what's the idea?

The Proble;
You have a loose fittign stylus that over time has gotten to the point of falling out on its own.
The goal:
Stop loosing styli.
Hope that helps; Lew

The reason the stylus falls out is that the plastic retainer cracks.
The pictures show how using a slice of an eraser jammed into the gap will help retention.
OK, that much I get, but where does the little metal spring part come from and what does it do (or is it a bit that's already there)?
John

jko said:
The reason the stylus falls out is that the plastic retainer cracks.
The pictures show how using a slice of an eraser jammed into the gap will help retention.
OK, that much I get, but where does the little metal spring part come from and what does it do (or is it a bit that's already there)?
John
Click to expand...
Click to collapse
It lookes like the metal piece is part of the housing. He may be trying to point out how it goes back in place. Things like that have a tendancy to "spring" out of position as you open up a housing w/out giving you a chance to see where they go back to. That is if you can even find them once they hit the floor. Lots of little pieces that if lost can really ruin your day.
I'm a little worried about the VOID warranty sticker covering one of the internal screws. Also, looks like the guy dinged up his housing trying to pry it open.
It is the best fix I've seen so far for the problem. If you can get that VOID sticker pealed back and replaced w/out somebody being able to notice, you should be able to keep your warranty intact should you ever need it.
Ingenuis solution.

Although I dont have this problem (yet) I am going to add this little link to here. It is where you can get the PDF manual (disassembly and reassembly), I think it is way easier to follow then the web tutorial, you can just look back and forth to fix the styli thing.
http://forum.xda-developers.com/viewtopic.php?t=43836
Later; Lew

Removing logos from back cover?

How does one go about doing this without damage the back cover?

thejron said:
How does one go about doing this without damage the back cover?
Click to expand...
Click to collapse
Not to sound like a smart ass, but carefully im sure it can be done but without damaging the rest of the cover, im not so sure.

I think you'd be safer to just put a nice, low-profile black case on it. Or maybe rubberize it with spray-on plastic, that might look nice. I'm having trouble imagining how you'd remove the logos and not cause any damage to the rest of the cover. Some sort of chemical bath or soft scraper, maybe? Or you could try just buffing them out.

I've never done it but I remember people using sugar cubes to do this in the past.
I take no responsibility if you trash your battery cover doing this though.

[Q] Taking apart tips

this goes out to people who have had any experience taking the hd2 apart, not interested in other comments thanks,
Basically im gonna rip it open tonight and attempt to fix my micro usb charger port, phone isnt being used i have a sgs2 now, so its no hassle if it dont work ill claim on my insurance, so looking for tips and advice on what to and what not to do when taking this beast apart please.
thanks in advance
cant send it to HTC because they already sent it back to me,

These are the YouTube videos I followed when I swapped my digitizer/LCD.
http://www.youtube.com/watch?v=cL-jnUKufC4
http://www.youtube.com/watch?v=t8Q7mXdcJ54

The only thing I encountered with my TMOUS HD2 is that one of the four torx screws that you have to remove to get into the unit has a "VOID" sticker that is exactly the size of the screw head and it came apart when I attempted to remove it. I don't know how this will affect an insurance claim if you pursue this yourself.
Also, pay close attention when moving/pulling wires. You have to put them back in the right order and pathways so that the phone closes properly. The volume up/down button is also a bit tricky when reassembling. I found it easiest to place it in the housing and keep it level so it doesn't misalign when putting the housing back on.
Good luck!

With the VOID stickers if you are extremely careful and steady handed you can remove them with a toothpick. What I did is take a toothpick and run it around the edges of the stickers to kind of loosen it up. If you are very careful you can kind of push the sticker around a little just enough to loosen it up then you can get the toothpick under it and pull up the sticker without tearing it. Just take your time it is not that easy but it isn't that hard either.

Aww man bsbokc, I wish I had you around when i worked on mine. I tried with a safety pin and I guess it was too sharp and it just tore right through it. I didn't think to trace the edge, I simply tried grabbing an edge and pulling across it. Fail.
A little heat might help soften the adhesive too. Just not too much to damage the phone though!

apalileo said:
Aww man bsbokc, I wish I had you around when i worked on mine. I tried with a safety pin and I guess it was too sharp and it just tore right through it. I didn't think to trace the edge, I simply tried grabbing an edge and pulling across it. Fail.
A little heat might help soften the adhesive too. Just not too much to damage the phone though!
Click to expand...
Click to collapse
I personally won't do anything with heat with my phones. But since I am posting here I guess I will ask you guys a quick question so I don't have to open a thread. Do all of the TMOUS HD2's have just one void sticker on the bottom right hand screw or are there two stickers each on the bottom screws?
I have a phone I have to send into HTC and I pulled one sticker from my myTouch but I thought there were two stickers on the HD2 can someone please look and tell me?

Just follow the videos carefully and pause often. Make sure you have all equipment and take
your time..
good luck

Thanks for the video links they were a great help
Sent from my HTC HD2 using xda premium

bsbokc said:
I thought there were two stickers on the HD2 can someone please look and tell me?
Click to expand...
Click to collapse
I've worked on mine and two of my friends' TMOUS HD2s. It's always been one void sticker on the bottom right (volume button side).

The simplest way of taking you phone apart.... Get a credit card... American express proffered because it is hard..... Use a rzor blade and remove void stickers careful.. Open scrues gently... Makesure not to leave any mark on the screw...... Take the credit card and force it in the joint on the right side of the headphone part... Then gently push borax from battery compartment area.... Also help you self a bit by prying the lcm with the credit card... Once it is out a bit... Do same thing for other side... Don't slide it to the other side... You may damage you head phone..... Once it is out a bit from top... Slide the card the sides until it opens up... Warning don't. Slide near the keypad.... You might damage the copper connector for antenna. And whether phone is out... You volume key will pppout too :F
Sent from my HTC HD2 using XDA App

Well guys I got it apart and back together,
little damage to the case trying to open it as it never went back together properly when it was sent away last time.
I would say, make sure you have a stiff plectrum (guitar pic) so much easier
take your time,
and if you get stressed take a break.
I got it all back together again, couldn't get a new micro usb connector on as the main board is screwed.

Please help me out water damage?

So I've had my S5 for over 2 months. I'm always very careful with my stuff. I had the original cover on the phone and once a week I would run it under cold water to wash off any grime or dirt. Everything would be fine.
Now I got the wireless charging cover and I did the same routine. I made 1000% sure it was sealed completely. Now I start to experience slow down and freezing. So much so I have to remove the battery to restart. So I take off the cover and I see water on the battery. Not a lot but this is supposed to be wster resistant. I also notice some water where the cover snaps on to the phone. I dry it all off..I also called Verizon who said I'd have to go to the store to check for water damage which I say to myself Huh? But it's water resistant. Anyways I go to the store and they see nothing wrong with it. They said I can get a like new replacement but I feel that unfair since I spent my money and its not even 3 months old.
I noticed when I got home that by the speaker win the wireless cover it's not flush against he phone. The snaps are all in place but still there's a considerable gap between the cover and phone. Then I took the cover off and put the regular cover back on and there was no gap. It's flush against. Now is it possible hbis is a defect?
And should I accept the replacement device? Right now he phone is Ok but I'm worried no one wants a damaged phone.
Also my boot screen says custom even though I haven't rooted. I even used a root checker to make sure. Only thing I did was turn off some apps and install nova.
Weird? Advice?
Ty

hakoreh said:
So I've had my S5 for over 2 months. I'm always very careful with my stuff. I had the original cover on the phone and once a week I would run it under cold water to wash off any grime or dirt. Everything would be fine.
Now I got the wireless charging cover and I did the same routine. I made 1000% sure it was sealed completely. Now I start to experience slow down and freezing. So much so I have to remove the battery to restart. So I take off the cover and I see water on the battery. Not a lot but this is supposed to be wster resistant. I also notice some water where the cover snaps on to the phone. I dry it all off..I also called Verizon who said I'd have to go to the store to check for water damage which I say to myself Huh? But it's water resistant. Anyways I go to the store and they see nothing wrong with it. They said I can get a like new replacement but I feel that unfair since I spent my money and its not even 3 months old.
I noticed when I got home that by the speaker win the wireless cover it's not flush against he phone. The snaps are all in place but still there's a considerable gap between the cover and phone. Then I took the cover off and put the regular cover back on and there was no gap. It's flush against. Now is it possible hbis is a defect?
And should I accept the replacement device? Right now he phone is Ok but I'm worried no one wants a damaged phone.
Also my boot screen says custom even though I haven't rooted. I even used a root checker to make sure. Only thing I did was turn off some apps and install nova.
Weird? Advice?
Ty
Click to expand...
Click to collapse
Well, first of all. The extended battery and cover for it were said a lonnnng time ago to not be water tight. So that's probably part of your problem.
Secondly, I would recommend using Computer screen cleaning wipes, or a microfiber cloth and a little bit of windex or other non-harmful glass cleaner to clean it instead of running cold water over it..
The more you can control what is cleaning it, the better off you are. A little more than A LOT.

kprice8 said:
Well, first of all. The extended battery and cover for it were said a lonnnng time ago to not be water tight. So that's probably part of your problem.
Secondly, I would recommend using Computer screen cleaning wipes, or a microfiber cloth and a little bit of windex or other non-harmful glass cleaner to clean it instead of running cold water over it..
The more you can control what is cleaning it, the better off you are. A little more than A LOT.
Click to expand...
Click to collapse
I'm running the stock battery and the wireless cover. I've read a lot of places it keeps the wireless seal. In fact the Samsung site States the same.

hakoreh said:
I'm running the stock battery and the wireless cover. I've read a lot of places it keeps the wireless seal. In fact the Samsung site States the same.
Click to expand...
Click to collapse
My apologies, it is still early.
I have still read on these forums that despite the claim by Samsung that it will hold the seal, users were saying it doesn't. Perhaps do a search for it and see what they say?

hakoreh said:
I'm running the stock battery and the wireless cover. I've read a lot of places it keeps the wireless seal. In fact the Samsung site States the same.
Click to expand...
Click to collapse
if you are using an official samsung accessory, you can send it back to samsung for repair. they will replace damaged parts with new ones. or you can go to verizon and get the like new one. either way, i wouldn't hold on to it if it has water damage and is acting flakey. it will never be right and by the time you get fed up with it you are out of warranty. replace it. and really, if verizon gives you a phone that is in as good a shape as the one you have, and works perfectly, who cares if someone else tried it and didn't like it and returned it.

Hobson318 said:
if you are using an official samsung accessory, you can send it back to samsung for repair. they will replace damaged parts with new ones. or you can go to verizon and get the like new one. either way, i wouldn't hold on to it if it has water damage and is acting flakey. it will never be right and by the time you get fed up with it you are out of warranty. replace it. and really, if verizon gives you a phone that is in as good a shape as the one you have, and works perfectly, who cares if someone else tried it and didn't like it and returned it.
Click to expand...
Click to collapse
I spoke to Samsung and they basically said I got a defective cover which honestly is BS. They said they can repair the phone but I wouldn't have access to a replacement and they don't provide replacements. Honestly I've always liked Samsung but now I'm thinking should I just take the replacement, sell it and get the LG G3 or something.

hakoreh said:
I spoke to Samsung and they basically said I got a defective cover which honestly is BS. They said they can repair the phone but I wouldn't have access to a replacement and they don't provide replacements. Honestly I've always liked Samsung but now I'm thinking should I just take the replacement, sell it and get the LG G3 or something.
Click to expand...
Click to collapse
At least samsung is willing to repair the phone. They could have just said it was your fault for not installing the cover correctly. I sent them a 16gb S3 a while back that I bricked. They fixed it and sent it back to me as a 32gb model. Did right by me. You aren't going to be any worse for taking the replacement verizon will give you. It will still have the same warranty plus it has the benefit of additional QA testing from factory.

Popped out my SIM card tray to find it broken

I see this is a very common problem with these phones. Except mine had snapped in half, and I was barely able to get the microSD card out. Now my SIM is stuck inside, along with the lower half of the tray. Issue is it's no longer under warranty. I've tried a few things, like holding it upside down and lightly thumping the top of the back/front with my palm. but that ****er just won't pop out. I'm leery of sticking anything inside there for fear of damaging anything, let alone attempting to pull it out with a cut credit card and a sliver of glue. I'm thinking I'll take it to a repair shop, but I heard that once it's taken apart, it loses its waterproof seal. Can anyone confirm this? Or offer some other advice?

GuyInDogSuit said:
I see this is a very common problem with these phones. Except mine had snapped in half, and I was barely able to get the microSD card out. Now my SIM is stuck inside, along with the lower half of the tray. Issue is it's no longer under warranty. I've tried a few things, like holding it upside down and lightly thumping the top of the back/front with my palm. but that ****er just won't pop out. I'm leery of sticking anything inside there for fear of damaging anything, let alone attempting to pull it out with a cut credit card and a sliver of glue. I'm thinking I'll take it to a repair shop, but I heard that once it's taken apart, it loses its waterproof seal. Can anyone confirm this? Or offer some other advice?
Click to expand...
Click to collapse
With fricking care I put a drop of super glue on a toothpick and fished mine out is how I did mine 3 times. I've broke 4 trays. I got a feeling it's something to do with sd cards ever since I quit using a SD card I haven't broke not 1. It's a punk ***** and I don't know why Samsung wouldn't use the metal ttys like in the past. I have several posts on this issue myself.
Yes once disassembled you lose the water proofing. I had to send mine in for warranty and needed my sim out of it obviously. And those tards of coarse said of the tray is broke the warranty was voided so I did everything in my power to remove it. But I did 3 times over

TheMadScientist said:
With fricking care I put a drop of super glue on a toothpick and fished mine out is how I did mine 3 times. I've broke 4 trays. I got a feeling it's something to do with sd cards ever since I quit using a SD card I haven't broke not 1. It's a punk ***** and I don't know why Samsung wouldn't use the metal ttys like in the past. I have several posts on this issue myself.
Yes once disassembled you lose the water proofing. I had to send mine in for warranty and needed my sim out of it obviously. And those tards of coarse said of the tray is broke the warranty was voided so I did everything in my power to remove it. But I did 3 times over
Click to expand...
Click to collapse
I'm very leery of using anything to do with glue, to be honest. Though that looks like I will have to do exactly that, unfortunately.

GuyInDogSuit said:
I'm very leery of using anything to do with glue, to be honest. Though that looks like I will have to do exactly that, unfortunately.
Click to expand...
Click to collapse
I mean I literally used like a quarter drop on the very top tip. The credit card idea seams even better a bit more surface area. The second time my tray got stuck totally and I bit the bullet and forced it out and it split in the middle between the SD and sim. Left the second half in it. The eject button doesn't work any more when I put my tool in now I have to angle it and pull. I haven't broke it now in like 6 months since I put my SD card in my Ps vita
I have never rough housed mine in the end I have probably removed my trays about 15 times since owning this device.
This is one of the biggest flaws with this device imo and I can't find a compatible aluminum tray anywhere

Could try pinching it out with two sewing needles?
Have done this with an iPhone for someone before. :crying:
Just make sure phone's off to avoid shorting anything...

CoreyOS said:
Could try pinching it out with two sewing needles?
Have done this with an iPhone for someone before. :crying:
Just make sure phone's off to avoid shorting anything...
Click to expand...
Click to collapse
I'm gonna get a pair of eyebrow pluckers, or whatever you call those really thin tweezers, and try to pluck it out that way. There is a small part of one side that is close to the top of the slot (as it broke off... diagonally, sort of), so hopefully I can grab ahold of that.

GuyInDogSuit said:
I'm gonna get a pair of eyebrow pluckers, or whatever you call those really thin tweezers, and try to pluck it out that way. There is a small part of one side that is close to the top of the slot (as it broke off... diagonally, sort of), so hopefully I can grab ahold of that.
Click to expand...
Click to collapse
Fingers crossed!!!

No such luck. It's really hard to see in there and even with a bright light and magnifying glass, I can't seem to find it. Looks like I'll have to take it to a repair shop and lose the waterproof seal, since they'll have to take it apart.

GuyInDogSuit said:
No such luck. It's really hard to see in there and even with a bright light and magnifying glass, I can't seem to find it. Looks like I'll have to take it to a repair shop and lose the waterproof seal, since they'll have to take it apart.
Click to expand...
Click to collapse
I guess I got lucky. Food for thought after the fact. Get a LifeProof case. Their water proof at least give back some of the resistancy. That's what I got on mine... I swapped frames and screens on Mine

get a new glass back with the ip68 tape. cost around $10 and waterproofing stays intact. pull the old one off and just make sure you clean the bonding area well.
I've done this 2x with mine and have no issues with water intrusion.

triumvirant said:
get a new glass back with the ip68 tape. cost around $10 and waterproofing stays intact. pull the old one off and just make sure you clean the bonding area well.
I've done this 2x with mine and have no issues with water intrusion.
Click to expand...
Click to collapse
Can you point me in the direction of a tutorial? For future reference and for anyone else who may have to do this as well? I've already had mine repaired and all's well, but I think this info would come in handy for others (including me if it happens again). The fact that people are having to do stuff like this multiple times with their phones is rather frightening.

GuyInDogSuit said:
Can you point me in the direction of a tutorial? For future reference and for anyone else who may have to do this as well? I've already had mine repaired and all's well, but I think this info would come in handy for others (including me if it happens again). The fact that people are having to do stuff like this multiple times with their phones is rather frightening.
Click to expand...
Click to collapse
Not sure on the rules for posting links, but if you search youtube for "S8 back glass replacement" you can find plenty of videos. I personally used the ifixit teardown guide just to familiarize myself with any cables or things to watch out for.
For the back glass itself, just make sure you get one with the camera lens pre-installed and with ip68 tape. Price for the one i bought is currently $10.02 on ebay.

TheMadScientist said:
I guess I got lucky. Food for thought after the fact. Get a LifeProof case. Their water proof at least give back some of the resistancy. That's what I got on mine... I swapped frames and screens on Mine
Click to expand...
Click to collapse
Yeah. I will second this. I do all my own repairs. But in this case I just don't care. I'm not interested in reselling. Or anything. This will be a backup in a few months. Time to move on. ???
It stays in the lifeproof so it's water resistant and I don't have to see it.

Solved!
1) Heat a needle, or a tiny flathead screwdriver, and stick it in.
2) Wait 1 minute.
3) Pull out needle or screwdriver to find sim attached and out!